I just bought for my T60 a pcmcia cardreader (16 in1) from HT-Link (HT-190). In Windows 7 no problem, but squeeze does not evenzethe card.It's not shown in lsusb or lspci.lspcmcia showsSocket 0 Bridge: [yenta_cardbus] (bus ID: 0000:15:00.0)
dmesg | grep pcmcia brings
[ 4.538206] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff
[code]...
I had this PCMCIA USB 2.0 card that worked in Lenny when I put this laptop into my closet in late 2009. I brought it back out a few weeks ago and put a fresh install of Squeeze on it, and it does not recognize the card. dmesg says something about "ignoring the device" (sorry, I don't have the machine in front of me).
Laptop in question is a Toshiba Tecra 8000. The PCMCIA card... has no brand on it whatsoever. I thought I had the box somewhere, but I have been unable to find it.
I have a Via-P VT6205 usb multicard cardreader, computer is running Lenny. According to Via this device is supported in linux kernel 2.4.2 and later. I see 4 icons for the 4 chips it handles in the computer window menu. Lsusb shows it and dmesg shows it, Device manager in control panel shows it, I see nothing that looks like an error mes media in drive" message.nstalled pcscd package and then I could mount a compacflash card. It worked once with an SD card but not twice. I installed hapackage,gnome_device_manager and still, the cardreader will not show an SD chip. The system during boot will test the SD chip during memtest when I forget and leave it in drive, when this happens the 4 icons in computer menu window will not be present after boot. Removing the SD chip and re-booting will bring the icons back.
View 6 Replies View RelatedThis is my first linux related question so be kind!
One thing I find is my digital cardreader doesn't work well on Linux.
I've wrote some code to fix this but when I try to click on visual studio nothing happens it won't install.
Does anybody have ideas how to make this Vodafone Mobile Connect Card model GLOBETROTTER by Option work on this compaq nx9005?
Pictures of the beast:
Bonus points will be awarded if no closed source software is required.
I got a new laptop and I install Debian Jessie, but the SD Card reader is not working at all. When I list the devices with lspci it list the device:
07:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5249 PCI Express Card Reader (rev 01)
getting a PCMCIA card to work on Lubuntu.
I have an old laptop (P3, 192 RAM) with Windows XP installed on it, but it is sooo slow, I decided to switch to Lubuntu. However, I cannot figure out how to enable the PCMCIA card after a fresh Lubuntu install.
I am trying to get an old IBM 600e to work with Centos 5.5. The install seems to have gone well but I am struggling to get any networking support. I am concentrating on a 3Com 3CCE589EC card which seems to be on the supported list. It works fine under Windows 2000 on the same computer so I believe the hardware is OK. When I insert it the following messages are shown in /var/log/messages:
pccard: PCMCIA card inserted into slot 0
pcmcia: registeing new device pcmcia0.0
0.0: RequestIRQ: Resource in use
0.0: RequestIRQ: Resource in use
0.0: RequestIRQ: Resource in use
Am I likely to have an easier time with a different card and if so which?
I am trying to make a d-link dwl-650+ pcmcia card work through ndiswrapper method following the direction at:[URl]... The first step there is to install the "kmod-ndiswrapper" via yum.
But, how would I just download this package to a usb drive so that I can transfer it to the laptop that needs wireless networking. Is there an option in yum where I can just download the package, not intstall, so that I can save it somewhere?
So here's the thing: I have a mobile broadband pcmcia card that worked just well on jaunty, but as I installed karmic it doesn't work, coz it mounts the card's storage but doesn't recognize the hardware. The help says I need the package 'udev-extras', but there's no such package for karmic and the one for jaunty doesn't work with karmic.
View 4 Replies View Relatedstill stalling after all those months, everything is explained here
[URL]
the card works fine in xubuntu jaunty, doesn't in xubuntu karmic or ubuntu karmic. i (my wife) wants to use ubutun karmic, but we still can't get this ATMEL PCMCIA wirelesscard to work on ubuntu karmic like it does on jaunty... and we have the windows INF drivers
I am running Debian Sid, KDE 4.3.4 with kernel 2.6.33 on a dual core 1.6 GHZ Toshiba Satellite A100-VA3, 2G ram. I have 4 multimedia keys beside my main keyboard that I used to configure successfully using the KeyTouch-Editor, and then loading it via KeyTouch. My problem is KeyTouch worked great with KDE 3.5.x but now it doesn't work with KDE 4.x.x. Has anyone managed to get KeyTouch to work with KDE 4.x.x? Is it broken or am I missing some kind of trick to get it to work?
View 3 Replies View RelatedMy touchpad just stopped working recently. It works in the framebuffer console, cat /dev/input/mice gives sensible output, X -retro shows a moving cross and it is completely functional during the gdm login prompt. But for some reason, it just stops responding halfway through the login process (roughly at the same time as gnome complains about my old laptop battery, if that is any help.) I run Debian Squeeze with Linux 2.6.32-5-686. The touchpad is a Synaptics PS/2 pad according to Xorg.
I do not understand the problem, actually. X seems unwilling to talk to my touchpad for some reason. When I run X manually from single-user mode, it complains that it cannot talk to my touchpad, but it works in the -retro test mode. As soon as gnome kicks in however, it stops working. synclient -l gives sensible output.
My external USB mouse works just fine.
i have download debian 6.0.1 DVD, and installed corectly,i am using internet behind proxy, but i configure all the things thier and i still can ping to google from CLI bt i could nt update my system
View 2 Replies View RelatedI'm trying to install using windows 7 on a 2010 macbook pro. Firstly the network configuration won't work and secondly the cd rom can't be detected. I've rewritten the usb drive several times with no joy.
View 3 Replies View Relatedi've installed debian 8 on this laptop but can't use the nvidia card from nvidia-detect can't find the card but it work 'cause i can see it in the list of hardware, 3d controller the driver from nvidia don't work, and i had a problem with force installation and xorg.conf file.. how i can make it work ? the card it's nvidia 820m
View 3 Replies View RelatedI just followed [URL] .... and [URL] .... because I need to connect to an iDRAC. I can't get I never see the Java Web Start Plugin as an option. If I do test my Java version, I only get the IceTea plugin.
View 2 Replies View RelatedI'm having trouble getting my wireless card (RNX-G300LX, from Rosewill) working with my Debian install. I had it working at one point in time, but (apparently) something has gone wrong, as it no longer connects. The network I'm trying to connect to uses WPA2. When I try to start up my wireless card as follows:
# ifup wlan0
I get the following response:
wmaster0: unknown hardware address type 801
wmaster0: unkown hardware address type 801
Listening on LPF/wlan0/00:1a:...
Sending on LPF/wlan0/00:1a:...
Sending on Socket/fallback
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 4
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 15
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 17
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
I have set up /etc/network/interfaces as follows:
auto lo
iface lo inet loopback
iface wlan0 inet dhcp
wpa-conf /etc/wpa_supplicant.conf
auto wlan0
and /etc/wpa_supplicant.conf looks like this:
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
ap_scan=1
fast_reauth=1
network={
ssid="apt_102"
scan_ssid=1
key_mgmt=WPA-PSK
psk="mypassword"
proto=WPA2 }
I should also note that running wpa_cli -i wlan0 tells me that it is "trying to associate" with my router, but authentication times out each time.
I cant log in as user. My keyboard doesn't work, not even ctrl+f1. So i cant get dmesg....Only thing that is working is alt+print screen+REISUB.
When i booted in safe mode from grub i can log in but only if i enter my root password. And then do /etc/init.d/gdm start.
If i tray to continue straight to gdm in safe mode my keyboard is not working so i can`t log in.
Day before i notices`d that i cant log in with ctrl+f1. When i tray i get this masage madone-desktop login: madone /bin/sh : cant open madone
I've been having this problem for a long time now. It started suddenly and without apparent cause. 3D games won't work. At first I tried to play OpenArena, and it didn't work, the graphics went terribly slow and choppy, videos were not continious, but rather a succession of pictures of movement. I tried installing and re installing the game several times, but nothing... Now, I'm trying to run hedgewars (the re-make of worms) and it doesn't crash or anything, but the graphics are too slow and choppy again. This is the output from the terminal:
[Code]...
The 'there is no soundcard' message is scary... I have been having sound problems lately, where sounds just stops working in all applications, and only restarting the system will bring sound back. So as you can see my audio and video seem to be on the wrong track. But I don't know how to diagnose the disease... by the way. I installed hedgewars from squeeze though I have lenny. I added the squeeze line to sources.list.and then apt-get-ed it. Is that OK?
I have installed Firestarter, and set it up following some manual (just a simple, baseline setting, nothing fancy). However, after restart I got error message: Starting the Firestarter firewall... failed! and then, later: startpar: service(s) returned failure: firestarter ... failed! Why this happens?
View 4 Replies View RelatedI've been running 6.0.2 amd64 stable since release day and recently have noticed my suspend and hibernate do not work. Normally I have transmission running and have set it to not enter sleep mode while torrents are active. However today I have not had transmission and was wanting to see if the sleep mode options would kick in. So I have set my display to "sleep when inactive for" 5 mins (this works perfect)
I have set "put computer to sleep when inactive for" 10 mins (this does not work at all)
When I try to manually test suspend my display flashes black for a few seconds but remains backlit, then asks me to log back in
When I manually go into hibernate mode my display turns off, pops back on for a second and in a terminal says something about a usb device (something failed but it happens so fast I cannot read it)
I have an Atheros wireless USB dongle that will connect to my Wifi network just fine in Gnome but in KDE doesn't. I've read through the http://wiki.debian.org/WiFi/HowToUse and have installed all packages and tried all methods noted there but still can't get the wlan0 to work at all in KDE. Is wireless in KDE & Debian Squeeze useless?
View 3 Replies View RelatedSo, as per Arch Linux's wiki, I tried to make some optimisations to the intel driver through setting it up in Xorg.conf (or as advised by that wiki article, in '/etc/X11/xorg.conf.d/20-intel.conf' ), but I've ran into trouble enabling DRI3. Here's my current config file:
Code: Select allSection "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "AccelMethod" "SNA"
Option "DRI" "3"
Option "TearFree" "true"
EndSection
So far everything works fine, I haven't seen any noticeable tearing, nor did I had any problems with any graphics-intensive programs I run, but there's a slight problem with the DRI3 part as indicated by Xorg's logs:
Code: Select all[ 26.556] (II) Loading sub module "dri2"
[ 26.556] (II) LoadModule: "dri2"
[ 26.556] (II) Module "dri2" already built-in
[ 26.556] (==) Depth 24 pixmap format is 32 bpp
[ 26.616] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[ 26.616] (==) intel(0): Backing store enabled
[Code] ....
First of all it still mentions the DRI2 driver, is this supposed to happen, or did something go wrong? Also it complains that it cannot find a file, which I can't figure out which package it belongs to, and taking a quick search around the interwebs hasn't produced anything useful...
The IGP is the CPU, which is actually a i5-4460... which according to Wikipedia it has a HD Graphics 4600 GPU.
I can not to start dnscrypt-proxy-1.6 like server.
I use the man: [URL]
The man work for dnscrypt-proxy-1.2. It was work good. On latest version the man don't work.
I want that my DNS server is work well work.
uname -a
Code: Select allLinux raspberrypi 4.1.13-v7+ #826 SMP PREEMPT Fri Nov 13 20:19:03 GMT 2015 armv7l GNU/Linux
cat /etc/dnsmasq.conf
Code: Select alldns-forward-max=500
bogus-priv
resolv-file=/etc/resolv-dnsmasq.conf
no-resolv
listen-address=192.168.1.5
bind-interfaces
cache-size=600
[code]....
My system is Reaspbian (Like debian but for Raspberry pi 2).
I've been trying to get an ECDSA certificate to work for my postfix installation, however, it seems that when I try to use the aECDSA protocol with a client the server gives "no shared cipher" errors.
I had created the certificate like so:
Code: Select allopenssl ecparam -name secp521r1 -genkey -param_enc explicit -out private/ec-email-server.pem
openssl req -new -x509 -key private/ec-email-server.pem -out certs/ec-email-server.pem -days 365
So I've setup a test server, and connected to it with a test client like the following:
Code: Select allopenssl s_server -accept 123 -cert /etc/ssl/certs/ec-email-server.pem -key /etc/ssl/private/ec-email-server.pem
openssl s_client -connect localhost:123
However, once again, I get "no shared cipher" errors.
i have recompiled kernel on my netbook (lenovo s10-3t).suspend works correctly but then i cannot wake up. i think i just missed some kernel options.what options must be set for suspend/wake up?
View 7 Replies View RelatedI've been running my server for a few months now. I'm using the latest version of Lenny, regularly updated. The system is basic: it's a Celeron 1.2GHz-based machine with 512MB RAM. Since it runs SAMBA, I wanted it to run on Gigabit, so I bought a generic gigabit ethernet card with a Realtek RTL8169 chipset. For reference, the original ethernet adapter is an Intel 82801 (815 chipset) 10/100MBit. The card appeared in lspci when I first started up the system but eth1 wasn't up; I installed the Realtek drivers anyway (having installed all the kernel sources etc) and brought eth1 up. However, no matter what I do, it will NOT run at gigabit speeds!
It's plugged into a Belkin gigabit switch that I know will run at gigabit speeds; I've tried different ports and cables (including one that definitely allows gigabit) but nothing will allow the card to run at full speed. Eth0 is no longer set to automatic; only eth1 comes up on boot with a static IP.
[Code]...
I enabled java and flash in Iceweasel 3.5.16 via the related/required packages in the repository so flash-nonfree (or whatever it is) and the related java one. I didn't install either flash or java manually so no plugins that way. Flash and java works in Iceweasel. If I wanted to try Swiftfox, what do I do? I have it installed but both flash and java don't work.
I assume that one has to do the manual installs for both so go to both Flash and Java official sites and install the related Linux package. Will this conflict with my Iceweasel-based java/flash packages? Or do they go in separate directories and files? I don't want a conflict or interference and thus, don't want to break what's working.
My net-book is working properly with Debian squeeze 2-6-32-5-686, only the wlan does not work. After typing lsusb I have got the message: lsusb : Bus 002 Device 002 : ID 160a:3184 VIA Technologies, Inc. VIA VNT-6656 [WiFi 802.11b/g USB Dongle]
So I obtained the driver package : VT6656_Linux_src_v1.19_12_x86. I followed the instructions ( make install... ) - but the result is only a lot of error messages. Mayby I am using the wrong driver package for the squeeze kernel - I don't know.