Debian Configuration :: Realtek RTL8169 Won't Work At Gigabit?
Nov 16, 2010
I've been running my server for a few months now. I'm using the latest version of Lenny, regularly updated. The system is basic: it's a Celeron 1.2GHz-based machine with 512MB RAM. Since it runs SAMBA, I wanted it to run on Gigabit, so I bought a generic gigabit ethernet card with a Realtek RTL8169 chipset. For reference, the original ethernet adapter is an Intel 82801 (815 chipset) 10/100MBit. The card appeared in lspci when I first started up the system but eth1 wasn't up; I installed the Realtek drivers anyway (having installed all the kernel sources etc) and brought eth1 up. However, no matter what I do, it will NOT run at gigabit speeds!
It's plugged into a Belkin gigabit switch that I know will run at gigabit speeds; I've tried different ports and cables (including one that definitely allows gigabit) but nothing will allow the card to run at full speed. Eth0 is no longer set to automatic; only eth1 comes up on boot with a static IP.
[Code]...
View 12 Replies
ADVERTISEMENT
Sep 12, 2015
My laptop only has a 100Mbit ethernet port, so I bought two external USB gigabit ethernet dongles in the hope of getting faster ethernet speeds. I have never had trouble with Linux supporting ethernet before, but neither of these devices are working. One is an ASIX AX88179 (by TrendNet) and the other is a Realtek RT8153 (by Anker). When I plug these devices in, I get network devices called enx00e04ca82300 or enxd8eb97b61e4d (instead of eth0/eth1 as I would expect).
I can manually set an IP address with "ifconfig enx00e04ca82300 x.x.x.x up" and manually add a route and my network connection works at gigabit speeds. However, the long enx... network device name does not appear to be valid in some sense: tools like dhclient or iptraf or network-manager fail with messages like "no such device" (well, network-manager just hangs). I don't know if it's because the name is so long or because they are not fully registered inside the kernel.
I have vmware workstation installed, and it does some strange things with network devices (setting up bridges for everything). I have disabled its services and see the same behaviour. This looks like a kernel bug to me but it's possible it is a vmware issue. vmware works fine with my wireless and 100Mbit ethernet (eth0 and wlan0).
Realtek device
Some dmesg for the Realtek device:
Code: Select all[10264.619420] usb 4-3.1.1: reset SuperSpeed USB device number 4 using xhci_hcd
[10264.634651] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c4221a00
[10264.634653] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c4221a48
[10264.634655] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c4221a90
[10264.647842] r8152 4-3.1.1:1.0 eth0: v1.06.0 (2014/03/03)
[10264.647902] usbcore: registered new interface driver r8152
[10271.452198] IPv6: ADDRCONF(NETDEV_UP): enx00e04ca82300: link is not ready
[10275.094334] IPv6: ADDRCONF(NETDEV_CHANGE): enx00e04ca82300: link becomes ready
The Realtek device often crashes after just a few gigabytes have been transferred, with dmesg like this:
Code: Select all[10485.761603] net_ratelimit: 10 callbacks suppressed
[10485.761618] r8152 4-3.1.1:1.0 enx00e04ca82300: Tx status -71
[10488.694340] r8152 4-3.1.1:1.0 enx00e04ca82300: Tx status -71
[10488.711352] r8152 4-3.1.1:1.0 enx00e04ca82300: Tx status -71
[code]...
I have not investigated the ASIX device as much. However, my original 100Mbit ethernet has an ASIX chipset (AX88772) and that works perfectly. I have not observed the ASIX device crashing yet so I am using that for now (haven't used it for long yet though). But as before the device name appears to be invalid and I cannot run tools like dhclient. why two gigabit adapters with completely different chipsets would show up with long device names and support low-level stuff like ARP, ping, and static IPs, but fail with dhclient & network-manager? And the Realtek device seems to like crashing too.
View 0 Replies
View Related
Feb 12, 2016
I'm having a strange problem with data transfers between systems. I have a file server + my desktop. Both are running Debian 8.3. I have a samba share running on the file server and I mount the shares on my desktop on boot via /etc/fstab
When I copy a file using the nautilus from my home folder (on my HDD) on my desktop to the mounted network location, my transfers start out at gigabit speeds 80MB/s-90MB/s for a couple seconds and then drop down to about 8MB/s
But when I terminate the transfer and then use scp to transfer the same file, I get consistent gigabit speed throughout the transfer. I am not sure what is going on.
View 2 Replies
View Related
Nov 25, 2010
I've run into an issue that I'm not sure how to address. I'm running Squeeze and upgraded my system this morning.
The packages upgraded were:
About 10 seconds after upgrading, the system froze completely and I had to do a hard restart. The system froze again 10 seconds after the bash login prompt was displayed (I'm not using a display manager) after reboot. The source of the problem appears to be my Realtek 8192SE wireless driver. I was able to boot the kernel in recovery mode and uninstall it, which has fixed the issue. Rebuilding the driver causes the problem again.
I suspect that something to do with the sysv and init packages affected the driver in this way, but I've no idea where to start in trying to fix this. I can't imagine this is a fault of the Realtek driver as it worked just fine up until this point.
View 5 Replies
View Related
Jul 14, 2011
I'm going to start using Debian as my desktop system rather than Ubuntu since I'm not really liking all the crazy eye candy and just wanted a fast and simple system. My main problem is networking, I guess I'll start off with my system specs and other information for problem solving.
My specs are:
- Intel Core i7 2600K CPU
- Gigabyte Z68X-UD3P-B3 Motherboard
- 8GB DDR3 1600Mhz RAM
I have a Realtek RTL8111/8168B Ethernet Adapter builtin to my motherboad which I am using, I could only get a basic connection, by basic I mean that it allowed me to connect to my local area network but not the internet. I then modified /etc/NetworkManager/NetworkManager.conf to change to managed=true this allowed me to use the internet, but the problem is, that it is a very unstable connection, the speed is very slow and it drops a lot! I have to carry on running /etc/init.d/network-manager restart twice to get my connection back, which lasts for about a minute.
output of lspci | grep -i eth
07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
Output of cat /var/log/dmesg | grep -i eth
[ 1.414250] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.415080] eth0: RTL8168b/8111b at 0xffffc90000c7c000, 1c:6f:65:c5:7c:34, XID 0c900800 IRQ 31
[ 9.213351] r8169: eth0: link up
[ 9.213392] r8169: eth0: link up
[ 13.813496] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
View 1 Replies
View Related
Feb 1, 2010
I'm giving up trying to install Lenny as a server. The netinstall won't recognise my realtek 8139 chipset on the PCI ethernet NIC. I've googled so much i'm freakin loosing it. The install fails while getting an IP adress via DHCP. So a new networkcard is in order. Why not go for gigabit lan then. Which PCI gigabit LAN card is 100% guaranteed to work with Lenny net install cd?
View 3 Replies
View Related
May 6, 2010
I am running Debian Sid, KDE 4.3.4 with kernel 2.6.33 on a dual core 1.6 GHZ Toshiba Satellite A100-VA3, 2G ram. I have 4 multimedia keys beside my main keyboard that I used to configure successfully using the KeyTouch-Editor, and then loading it via KeyTouch. My problem is KeyTouch worked great with KDE 3.5.x but now it doesn't work with KDE 4.x.x. Has anyone managed to get KeyTouch to work with KDE 4.x.x? Is it broken or am I missing some kind of trick to get it to work?
View 3 Replies
View Related
Jun 14, 2010
My touchpad just stopped working recently. It works in the framebuffer console, cat /dev/input/mice gives sensible output, X -retro shows a moving cross and it is completely functional during the gdm login prompt. But for some reason, it just stops responding halfway through the login process (roughly at the same time as gnome complains about my old laptop battery, if that is any help.) I run Debian Squeeze with Linux 2.6.32-5-686. The touchpad is a Synaptics PS/2 pad according to Xorg.
I do not understand the problem, actually. X seems unwilling to talk to my touchpad for some reason. When I run X manually from single-user mode, it complains that it cannot talk to my touchpad, but it works in the -retro test mode. As soon as gnome kicks in however, it stops working. synclient -l gives sensible output.
My external USB mouse works just fine.
View 1 Replies
View Related
Apr 13, 2011
i have download debian 6.0.1 DVD, and installed corectly,i am using internet behind proxy, but i configure all the things thier and i still can ping to google from CLI bt i could nt update my system
View 2 Replies
View Related
Jun 8, 2009
I installed CentOS 5.3 Final on a machine today and was having some problems with the NIC. When I installed CentOs the NIC would not work, I looked in the network configuration and saw that neither of my two NICS had IRQ's so I arbitrarily gave them some and they both worked fine. I then ran yum -update, installed updates and rebooted my machine. Again, the NICs stopped working, only this time setting the IRQ did nothing. I did some googling and found this thread: [URL] The output from the first two commands is as follows:
[root@localhost ~]# uname -rmi
2.6.18-128.1.10.el5 i686 i386
[root@localhost ~]# /sbin/lspci | grep ther 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10) 05:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10) I followed the steps outlined and my issue still remains.
View 12 Replies
View Related
Aug 4, 2015
I'm trying to install using windows 7 on a 2010 macbook pro. Firstly the network configuration won't work and secondly the cd rom can't be detected. I've rewritten the usb drive several times with no joy.
View 3 Replies
View Related
Sep 4, 2015
i've installed debian 8 on this laptop but can't use the nvidia card from nvidia-detect can't find the card but it work 'cause i can see it in the list of hardware, 3d controller the driver from nvidia don't work, and i had a problem with force installation and xorg.conf file.. how i can make it work ? the card it's nvidia 820m
View 3 Replies
View Related
Mar 14, 2016
I just followed [URL] .... and [URL] .... because I need to connect to an iDRAC. I can't get I never see the Java Web Start Plugin as an option. If I do test my Java version, I only get the IceTea plugin.
View 2 Replies
View Related
Jan 21, 2010
I'm having trouble getting my wireless card (RNX-G300LX, from Rosewill) working with my Debian install. I had it working at one point in time, but (apparently) something has gone wrong, as it no longer connects. The network I'm trying to connect to uses WPA2. When I try to start up my wireless card as follows:
# ifup wlan0
I get the following response:
wmaster0: unknown hardware address type 801
wmaster0: unkown hardware address type 801
Listening on LPF/wlan0/00:1a:...
Sending on LPF/wlan0/00:1a:...
Sending on Socket/fallback
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 4
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 15
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 17
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
I have set up /etc/network/interfaces as follows:
auto lo
iface lo inet loopback
iface wlan0 inet dhcp
wpa-conf /etc/wpa_supplicant.conf
auto wlan0
and /etc/wpa_supplicant.conf looks like this:
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
ap_scan=1
fast_reauth=1
network={
ssid="apt_102"
scan_ssid=1
key_mgmt=WPA-PSK
psk="mypassword"
proto=WPA2 }
I should also note that running wpa_cli -i wlan0 tells me that it is "trying to associate" with my router, but authentication times out each time.
View 8 Replies
View Related
Jun 8, 2010
I cant log in as user. My keyboard doesn't work, not even ctrl+f1. So i cant get dmesg....Only thing that is working is alt+print screen+REISUB.
When i booted in safe mode from grub i can log in but only if i enter my root password. And then do /etc/init.d/gdm start.
If i tray to continue straight to gdm in safe mode my keyboard is not working so i can`t log in.
Day before i notices`d that i cant log in with ctrl+f1. When i tray i get this masage madone-desktop login: madone /bin/sh : cant open madone
View 1 Replies
View Related
Aug 13, 2010
I've been having this problem for a long time now. It started suddenly and without apparent cause. 3D games won't work. At first I tried to play OpenArena, and it didn't work, the graphics went terribly slow and choppy, videos were not continious, but rather a succession of pictures of movement. I tried installing and re installing the game several times, but nothing... Now, I'm trying to run hedgewars (the re-make of worms) and it doesn't crash or anything, but the graphics are too slow and choppy again. This is the output from the terminal:
[Code]...
The 'there is no soundcard' message is scary... I have been having sound problems lately, where sounds just stops working in all applications, and only restarting the system will bring sound back. So as you can see my audio and video seem to be on the wrong track. But I don't know how to diagnose the disease... by the way. I installed hedgewars from squeeze though I have lenny. I added the squeeze line to sources.list.and then apt-get-ed it. Is that OK?
View 3 Replies
View Related
Dec 7, 2010
I have installed Firestarter, and set it up following some manual (just a simple, baseline setting, nothing fancy). However, after restart I got error message: Starting the Firestarter firewall... failed! and then, later: startpar: service(s) returned failure: firestarter ... failed! Why this happens?
View 4 Replies
View Related
Sep 6, 2011
I've been running 6.0.2 amd64 stable since release day and recently have noticed my suspend and hibernate do not work. Normally I have transmission running and have set it to not enter sleep mode while torrents are active. However today I have not had transmission and was wanting to see if the sleep mode options would kick in. So I have set my display to "sleep when inactive for" 5 mins (this works perfect)
I have set "put computer to sleep when inactive for" 10 mins (this does not work at all)
When I try to manually test suspend my display flashes black for a few seconds but remains backlit, then asks me to log back in
When I manually go into hibernate mode my display turns off, pops back on for a second and in a terminal says something about a usb device (something failed but it happens so fast I cannot read it)
View 3 Replies
View Related
Sep 10, 2011
I have an Atheros wireless USB dongle that will connect to my Wifi network just fine in Gnome but in KDE doesn't. I've read through the http://wiki.debian.org/WiFi/HowToUse and have installed all packages and tried all methods noted there but still can't get the wlan0 to work at all in KDE. Is wireless in KDE & Debian Squeeze useless?
View 3 Replies
View Related
Aug 13, 2010
Installing Fedora13 Kernel 2.6.33 killed my RealTek NIC. I found the following page which helped a little bit: [URL]. Unfortunately the card still does not work.
If I do
lsmod | grep r81
I get:
r8168 91833 0
So I am not sure the really the new module is loaded. Doesn't anybody have the realtek working with fedora13 ?
View 7 Replies
View Related
Nov 20, 2015
So, as per Arch Linux's wiki, I tried to make some optimisations to the intel driver through setting it up in Xorg.conf (or as advised by that wiki article, in '/etc/X11/xorg.conf.d/20-intel.conf' ), but I've ran into trouble enabling DRI3. Here's my current config file:
Code: Select allSection "Device"
  Identifier "Intel Graphics"
  Driver   "intel"
  Option   "AccelMethod" "SNA"
  Option   "DRI"  "3"
  Option   "TearFree"  "true"
EndSection
So far everything works fine, I haven't seen any noticeable tearing, nor did I had any problems with any graphics-intensive programs I run, but there's a slight problem with the DRI3 part as indicated by Xorg's logs:
Code: Select all[Â Â 26.556] (II) Loading sub module "dri2"
[Â Â 26.556] (II) LoadModule: "dri2"
[Â Â 26.556] (II) Module "dri2" already built-in
[Â Â 26.556] (==) Depth 24 pixmap format is 32 bpp
[Â Â 26.616] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[Â Â 26.616] (==) intel(0): Backing store enabled
[Code] ....
First of all it still mentions the DRI2 driver, is this supposed to happen, or did something go wrong? Also it complains that it cannot find a file, which I can't figure out which package it belongs to, and taking a quick search around the interwebs hasn't produced anything useful...
The IGP is the CPU, which is actually a i5-4460... which according to Wikipedia it has a HD Graphics 4600 GPU.
View 3 Replies
View Related
Dec 23, 2015
I can not to start dnscrypt-proxy-1.6 like server.
I use the man: [URL]
The man work for dnscrypt-proxy-1.2. It was work good. On latest version the man don't work.
I want that my DNS server is work well work.
uname -a
Code: Select allLinux raspberrypi 4.1.13-v7+ #826 SMP PREEMPT Fri Nov 13 20:19:03 GMT 2015 armv7l GNU/Linux
cat /etc/dnsmasq.conf
Code: Select alldns-forward-max=500
bogus-priv
resolv-file=/etc/resolv-dnsmasq.conf
no-resolv
listen-address=192.168.1.5
bind-interfaces
cache-size=600
[code]....
My system is Reaspbian (Like debian but for Raspberry pi 2).
View 0 Replies
View Related
Apr 27, 2016
I've been trying to get an ECDSA certificate to work for my postfix installation, however, it seems that when I try to use the aECDSA protocol with a client the server gives "no shared cipher" errors.
I had created the certificate like so:
Code: Select allopenssl ecparam -name secp521r1 -genkey -param_enc explicit -out private/ec-email-server.pem
openssl req -new -x509 -key private/ec-email-server.pem -out certs/ec-email-server.pem -days 365
So I've setup a test server, and connected to it with a test client like the following:
Code: Select allopenssl s_server -accept 123 -cert /etc/ssl/certs/ec-email-server.pem -key /etc/ssl/private/ec-email-server.pem
openssl s_client -connect localhost:123
However, once again, I get "no shared cipher" errors.
View 1 Replies
View Related
Jul 30, 2010
i have recompiled kernel on my netbook (lenovo s10-3t).suspend works correctly but then i cannot wake up. i think i just missed some kernel options.what options must be set for suspend/wake up?
View 7 Replies
View Related
Jan 8, 2011
I enabled java and flash in Iceweasel 3.5.16 via the related/required packages in the repository so flash-nonfree (or whatever it is) and the related java one. I didn't install either flash or java manually so no plugins that way. Flash and java works in Iceweasel. If I wanted to try Swiftfox, what do I do? I have it installed but both flash and java don't work.
I assume that one has to do the manual installs for both so go to both Flash and Java official sites and install the related Linux package. Will this conflict with my Iceweasel-based java/flash packages? Or do they go in separate directories and files? I don't want a conflict or interference and thus, don't want to break what's working.
View 7 Replies
View Related
May 12, 2011
I just bought for my T60 a pcmcia cardreader (16 in1) from HT-Link (HT-190). In Windows 7 no problem, but squeeze does not evenzethe card.It's not shown in lsusb or lspci.lspcmcia showsSocket 0 Bridge: [yenta_cardbus] (bus ID: 0000:15:00.0)
dmesg | grep pcmcia brings
[ 4.538206] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff
[code]...
View 6 Replies
View Related
Feb 14, 2011
My net-book is working properly with Debian squeeze 2-6-32-5-686, only the wlan does not work. After typing lsusb I have got the message: lsusb : Bus 002 Device 002 : ID 160a:3184 VIA Technologies, Inc. VIA VNT-6656 [WiFi 802.11b/g USB Dongle]
So I obtained the driver package : VT6656_Linux_src_v1.19_12_x86. I followed the instructions ( make install... ) - but the result is only a lot of error messages. Mayby I am using the wrong driver package for the squeeze kernel - I don't know.
View 9 Replies
View Related
Oct 9, 2010
Sound works with Jaunty Jackal. Does not work with Lucid Lynx. It appears that Lucid Lynx will only acknowledge that I have a modem as a sound card. I just want to add my RealTek ALC880 driver so the sound will work. I've made sure that I have audio privileges, I made sure that nothing is muted using alsamixer. I've been looking at threads and documentation for four days just to fix the sound issue and so I can be prepared in case this 'feature' ends up being continued in Maverick Meerkat and when I upgrade I can use M.M. with minimal fuss.
View 1 Replies
View Related
Jan 7, 2011
i have MB:Gigabyte 770t USB and Cpu Phenom II x2 555 BE My sound card didnt work and i have no sound at alll. only hardware that reconized as sound output in my sound setting is 5700 series HDMI which blong to my VGA.
View 9 Replies
View Related
Jun 19, 2015
I'm running Debian 8.1 KDE on a 2007 dv6 laptop. Model number is worn off. lol but the specs:
Intel i3 first gen m 330
4GB RAM
Intel (ironlake) graphics
First off, closing the lid to my laptop doesn't trigger suspend, or anything no matter what I set it to in power options.
I can suspend using "systemctl" or suspend from the "Leave" menu, but upon turning my computer back on, my touchpad and keyboard don't work.
Sometimes, my touchpad will start working after about 15 seconds, but the keyboard doesn't come back. I have to hard reset.
I have a feeling it's something to do with systemd, but I'm not super proficient in linux. Just an end user who is friendly with a terminal.
View 6 Replies
View Related
