i've installed debian 8 on this laptop but can't use the nvidia card from nvidia-detect can't find the card but it work 'cause i can see it in the list of hardware, 3d controller the driver from nvidia don't work, and i had a problem with force installation and xorg.conf file.. how i can make it work ? the card it's nvidia 820m
View 3 RepliesI recently installed Squeeze. I had sound with the video driver that came with the install. Then I installed the Nvidia driver from Nvidia website. The sound dissappeared. When I uninstalled the Nvidia driver and removed xorg.conf and rebooted again, the sound came back. Then I installed the Nvidia driver from (nvidia-glx, dev and settings) from Debian with Synaptic. The sound went away again. If I uninstall the nvidia driver and xorg.conf the sound will probably come back again. The sound driver is the one that came with the install.
The volumes are unmuted in the alsamixer. Somehow alsaconf command does not work.
My mother board is a ASUS M4N78 Pro with Nvidia IGP.
What can I do to have sound with the nvidia driver?
I follow a french tutorial to install the nvidia pilots. So, i did :
$ su
# apt-get install module-assistant
# m-a prepare
# m-a clean nvidia-kernel
# m-a a-i -i nvidia-kernel-source
[Code]....
I'm encountering a problem running X and Gnome from a Xen-enabled Kernel with NVIDIA Binary driver compiled with IGNORE_XEN_PRESENCE=y on debian squeeze
Hardware:
NVIDIA NVS 5100M
Kernel:
Debian Squeeze : 2.6.32-5-xen-amd64
NVIDIA Kernel from the official package
Boot and module loading are successful, but when X starts, I only get a black screen. I attached here my Xorg.0.log, however it doesn't seems to have any problem.
I get plymouth and install it success, but it only support nouveau(nvidia) mode.
When I update my driver with [URL] , plymouth gone.
Is there any other way to do boot-image with the driver from [URL] ?
I find super-image-manager(buc), but I can not install it.
Addition: What is buc ?
I have installed the Nvidia drivers on my desktop using [URL] according to the Debian way. Everything seems to be fine except the resolution. The best it will let me choose is something like 600x480. I have searched and most of what is suggested around the web is to change xorg.conf. I have tried this using different setting suggested but nothing is working. I did not have a xorg.conf file so I created one with the setting suggested on the Debian wiki.
View 12 Replies View RelatedI've posted here before (viewtopic.php?f=5&t=66322) about problems arising from my attempts to get an nVidia driver to work with my custom kernel. Now those problems are all fixed, and I'm back to where I was: the built kernel boots fine, but the nVidia driver fails.
The custom kernel is as near to the stock one as I can make it, I'm just trying to find a working build process at present, before trying to build a later-version kernel.
I used sgfxi with "-! 40" to build the nVidia driver for my custom kernel; it reported that everything was fine.
With stock kernel - 2.6.32-5-amd64 ...
Extracts from /var/log/Xorg.0.log:
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
code....
After I've installed nvidia-vdpau-driver 280.13-1 from debian testing repositories, all the colors on the screen became too bright, except dark colors.
I've tried to change the values from Brightness, Contrast and Gamma, in NVIDIA X Server Settings -> X Server Color Correction, but it doesn't bring everything back to normal.
Either the nvidia driver has problems, or I don't know how to calibrate. But before I installed nvidia-vdpau-driver, I had the nouveau display driver (experimental), and all colors were displayed normally, the same as in Windows 7 and XP.
I revived my old desktop (failed psu), and installed debian squeeze using netinst. It has a nvidia geForce 7600GT card. The driver in squeeze does not work very well, so I downloaded nvidia driver-installer. When I run it, it comes back with an error saying the kernel (I assume the nvidia graphics kernel) is compiled with gcc4.3, but the system is using gcc4.4. Using synaptic manager, I installed gcc3.3, but same error.
Next I tried to uninstall gcc4.4 and it gave a warning the system might not be usable. I did not understand it, but I went ahead and uninstalled gcc4.4 and guess what, the system is not usable, and I have to re-install squeeze. Not a big loss, since I do not have much in it. How to install this nvidia driver, specifically, how do I get switch to gcc4.3 from gcc4.3? Also, the squeeze install gave me 2.6.33-trunk-amd64, and 2.6.33-3-amd64. How do I get rid of ...trunk-amd64? Do I just delete it from grub?
I've built a new kernel (2.6.34) on our workstation at work. It boots and runs beautifully, but there is one minor problem. I created the kernel as a Debian package along with the kernel headers. Upon installing both and attempting to build the nVidia driver for said kernel, the installer tells me that it cannot determine the version and quits. This happens even if I manually specify the path to the headers. What's going on here, did I miss something during my compilation of the new kernel?
View 14 Replies View RelatedI'm running succesfully Debian 6.0 after first trying Debian 5.0 and ran into missing partitions. This is solved by using Debian 6.0 (Beta 2).
Now it's NVidia's turn: Under Ubuntu (yes...i know it by now...) you had to install a proprietary driver for NVidia to ensure that 3D was supported. What about Debian? There's nothing like this under Debian? How do i know if 3D is supported?
I have 64bit debian 6 squeeze installed on my 64bit pc. I have an NVIDIA gpu which I have installed the drivers for and they work just fine. I also have a 32 bit chroot located at /32 which was created using debootstrap. The NVIDIA 64bit driver gives the option to install compatability driver libraries into the 32bit chroot. Whenever I run any application that uses opengl rendering within the chroot, they segfault. When I uninstalled and reinstalled the NVIDIA driver without installing the libraries to the chroot, and instead replaced them with mesa gl libraries, the programs complain about framebuffer missing. They do not segfault, and some programs that can use sdl instead will work fine. I have xhost + set to allow any programs in the chroot to use the host's xorg. I have the host's proc mounted to the chroot proc directory, and i also have dev mount --bind 'ed to the chroot.
View 11 Replies View RelatedUsing squeeze with a GeForce4 MX 440 video card (NVIDIA) I have a monitor (4/3 aspect ratio, 1024x768 usually), and a TV connected via S-video After installing the NVIDIA driver using the NVIDIA binaries I managed to have a cloned twin screen configuration working.
However, the monitor is (wrongly) detected as having size 1824x768 (aspect ratio is widescreen) Using system monitor, I can set the correct size, but only for one session; besides, the login screen too is messed up the xorg.conf file seems right: proper resolution modes are set; xorg.0.log too
I'm trying to install the nvidia drivers but it is not working.
lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)
My xorg.conf looks like this:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]...
And after that my X is not working. And when i try sudo modprobe nvidia I get this:
FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device
I get this error on enabling nVidia repo and downloading driver from YaST.
Code:
Switching the use of "nv" driver of X.Org to "nvidia" driver of NVIDIA
------------------------------------------------------------------------
head: cannot open `/etc/X11/xorg.conf' for reading: No such file or directory
SaX2 generated xorg.conf not available!
grep: etc/X11/xorg.conf: No such file or directory
[code]....
Currently using Nvidia driver version 195.36.31, it's the version that works with Nvidia-kernel-dkms, would updating Nvidia driver to the current 275.09.07 driver version break my setup?
View 3 Replies View Relatedinstall debian 6 on my pc and have big problem with videoadapter driver i cannot install driver i dowload driver from nvidia do something in google but nothing! palit gtx 460 linux debian 6 x64.
View 3 Replies View RelatedI have installed the current Nvidia driver(s) for my video card:
nvidia-gfxGO2-kmp-desktop 260.19.12_k2.6.34.0_12-24.1
x11-video-nvidiaGO2 260.19.12-25.1
nvidia-settings 256.35.0.pm. 1.1
xorg-x11-driver-vido-nouveau 0.0.15_20100401_bfb95cc-1.10
libXNVCtrl 256.35-0.pm.2.1
Now my problem is everytime I save the configuration for
- the open GL settings
- the anti aliasing settings
- the powermizing settings
with the GUI-programm NVIDIA X Server Settings under GNOME
Every setting is lost completely after a restart of my system and the defaults are reset even if i save the configuration in the menu nvidia-settings configuration of the GUI-programm NVIDIA X Server Settings. Is there a possibility to SAVE the settings? They should stay after a reboot.
I think this is a issue very spread under several Linux distributions. I can't understand the source of the mistake or bug.
Just installed Ubuntu, have no idea what I'm doing. This message appears and don't know how to do it. "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server."
View 2 Replies View RelatedProprietary driver does not work under ubuntu 11.04.I found this in Xorg log:
Quote:
(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
on my old fx 5200 nvidia card, I installed the 173 driver and now when I log in to Default Ubuntu desktop with 3d enabled, like my screen will flash on and off like the panel and my awn dock turns white and then returns to desktop and repeats. You can only see the wallpaper and thats it. Useless! My desktop is virtually useless because I can't even use it. Gonna have to reinstall Ubuntu for the 5th time!
View 5 Replies View Relatedi have GF 6600..when i have install Karmic i was install driver NVIDIA for my GF6600 then finish n restart. but when my CPU booting to Ubuntu..Its Blank..the Driver its not work(Make my Ubuntu Error). Then i Install New Ubuntu Lucid..then i Install the Driver again(i think its will work)...But when i restart n Booting to Ubuntu...Same Error again, The Driver make Blank Screen??
View 5 Replies View RelatedI read that the Nouveau Gallium3D driver will work with Nvidia cards in Fedora 13 (YAY!)What I was wondering is this - will the driver work in 12 or will I need to get 13?
View 14 Replies View RelatedI made the mistake of trying to install an nvidia graphics driver from the download.nvidia.com/opensuse11.2 repository. My card is a PCI quadro nvs 295 so looks like it should be supported. The installation and update of the kernel seemed to be successful, but for some reason sax2 doesn't seem to recognise the nvidia card, even when I run "sax2 -r -m 0=nvidia" and I'm stuck with the VESA framebuffer graphics default in /etc/X11/xorg.conf code...
I've found tons of threads on this kind of thing but I only seem to be making things worse trying to fix it. If anyone can give me a hint and fix my pathetic-looking desktop I'd be very grateful!!! At the moment nothing that uses opengl will work either
I cant run my compiz. After updating the nvidia driver (current) and rebooting, i got a menssage saying that X is not working properly.
Denis@denis-desktop:~$ lspci
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
[Code]....
I just installed Maverick on my HP tx1000. Jockey offered me two drivers for my NVidia Go 6150. I tried the recommended one--and it seemed to be working. It had a green light next to it in Jockey, Compiz worked, etc. Then I rebooted.
Except it didn't reboot--the disk thrashed for a while, and then I was met with a black screen. I tried recovery mode and got a bash prompt...which crashed when I ran `startx'. Then I tried Failsafe X, which did work. After some experimentation, I realized it was the Nvidia driver at fault, so I tried the not-recommended one, which didn't work, and now I've disabled both of them. But isn't there a proper driver for me to use? IIRC, I was using a restricted one with Lucid, and it was working all right.
Fun fact: The day before I installed Maverick, Windows 7 randomly decided to not boot all the way. It would show the splash screen, and then hang with a black screen too. But it works in Safe Mode. And had been working fine for a while beforehand. There must be demons in my graphics card.
I'm trying Fedora for the first time. I tried installing NVidia's driver with their shellscript but it didn't work for lots of reasons. Has anyone done this before?:[URL].. Does it work? I never used a distro with a package manager before. Aren't there several different drivers for different NVidia cards? How do the instructions in that link make you get the correct driver? And then does it create an /etc/X11/xorg.conf file?
EDIT: or is the Neaveau driver good enough already? I can't figure out if it's basically a finished product or not.
I've been having big problems getting 9.10 to work with a Geforce4 MX-4000 card. I know it is not a hardware problem because I've got a dual boot win xp/9.10 setup and the video card works very well under win xp. The monitor is a Samsung P2250. The issue is that the highest resolution available after installing the recommended nvidia 96 driver is 800x600, the same as that before the driver was installed. This is very frustrating because the monitor requires 1920x1080 I'm not sure whether the driver is at fault or the xorg.conf settings.
Should I try installing the nvidia site drivers? I've checked out several forum threads on xorg.conf settings but I'm really not sure how to go on this. What I need is an entry level guide to setting up xorg.conf. The manual here is not that user friendly.
I installed Debian Squeeze with no issues. I went to install latest Nvidia driver as done previously with Lenny. Used instructions that worked on lenny from "the trooper" [url]
Downloaded th latest driver for my GeForce 7300 GS vidio card, driver package NVIDIA-Linux-x86-260.19.12.run
Used "method # 2 as described in HOW TO,as it worked perfectly in the past on Lenny. Only syntax I changed was instead of gdm I typed gdm3 as it appears that is the new name for gnome in Squeeze.
Did as folows:
Now the trouble showed up, Unfortunatly I can only go off my memory. A question was asked stating that something did not match, it needed a 3 and the driver had a 4 version or somethng of this sort. then it asked if I new what I was doing (and I lied) and selected yes. And whammo, it didn't work. (This question was asked when i did in Lenny and it is working perfectly still on that system). I now can not boot to GUI, I notice when system boots it starts in "S" mode although I select normal boot from grub2.
Not too bad if I got to reinstall as little is on the system. I just want to know what I am missing on the instalation deal or should I be going about this difrently with Squeeze.
While installing XBMC, which was working with my standard Ubuntu install, I accidentally installed NVidia hardware acceleration (sudo apt-get install libvdpau1 nvidia-185-libvdpau) on a notebook with ATI video.
Now XBMC does not work and says it requires OpenGL. apt-get remove does not work for that package because it's transitional. how I can get my stuff working like it was?