Debian Configuration :: Suspend And Hibernate Do Not Work At All
Sep 6, 2011
I've been running 6.0.2 amd64 stable since release day and recently have noticed my suspend and hibernate do not work. Normally I have transmission running and have set it to not enter sleep mode while torrents are active. However today I have not had transmission and was wanting to see if the sleep mode options would kick in. So I have set my display to "sleep when inactive for" 5 mins (this works perfect)
I have set "put computer to sleep when inactive for" 10 mins (this does not work at all)
When I try to manually test suspend my display flashes black for a few seconds but remains backlit, then asks me to log back in
When I manually go into hibernate mode my display turns off, pops back on for a second and in a terminal says something about a usb device (something failed but it happens so fast I cannot read it)
View 3 Replies
ADVERTISEMENT
Oct 28, 2015
Installed Debian 8.2 a while back, and I've been having issues with getting the machine to suspend correctly. If I try to put it to sleep when logged in to my regular user account the screen just goes black and then the computer hangs. However if I put it to sleep as root everything works fine. I do this by running this command (as root):
Code: Select allsystemctl suspend
What can I do about this? Worked fine on Debian wheezy..
Btw, just found this in the dmesg log. Connected perhaps..?
Code: Select all[ 6.863018] ACPI Warning: SystemIO range 0x00000000000018e0-0x00000000000018ff conflicts with OpRegion 0x00000000000018e0-0x00000000000018ef (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[ 6.863028] ACPI:
If an ACPI driver is available for this device, you should use it instead of the native driver
View 7 Replies
View Related
Jun 4, 2011
I've tried editing .xinitrc to contain ck-launch-session and dbus-launch to no avail. Console kit is installed. I'm using Sid without a login manager, and xfce's suspend and hibernate work fine on my Wheezy computer. Xfce4-session and consolekit are installed. Is this a problem with permissions?
View 3 Replies
View Related
Jul 25, 2011
I have installed the latest virtualbox 4.1 on my desktop and laptop. It hosed suspend and hibernate.
The laptop is A Dell D630 with Intel Core2 Duo CPU, the desktop is an AMD based ASUS M3N78-VM mobo with Athlon II x2 250 CPU. Debian Testing 32-bit (same results with the 2.6.39 and the 3.0 kernels). Both have nvidia cards though - the desktop an integrated 8200, the laptop a NVS 135M. But suspend/hibernate was working before with the 4.0 series virtualbox.
The workaround is to clear the vboxpci vboxnetadp vboxnetflt vboxdrv modules from the memory before suspend/hibernate. I added the
service vboxdrv stop
rmmod vboxpci vboxnetadp vboxnetflt vboxdrv
lines to my sleep script (i dont use power managers, just the acpi powerbutton/lid scripts modified). Everything is ok now.
View 3 Replies
View Related
Oct 4, 2009
How do I enable suspend in Lenny currently I can shut down or hibernate. In ubuntu on a different computer I can suspend which resumes very quickly can this work on Lenny also it does not hibernate properly anyway, there are error messages.
View 1 Replies
View Related
Aug 6, 2010
I am running Squeeze on an older Compaq EVO laptop with radeon graphics.
A few months ago, after an upgrade, suspend and hibernate stopped working. The suspend or hibernate worked fine, but the resume just hung with a black screen. I finally got around to looking into it and found a workaround.
The workaround is to disable Kernel Mode Setting for the radeon. This can be done by adding the boot parameter "radeon.modeset=0" or by editing /etc/modprobe.d/radeon-kms.conf so that it includes the line "options radeon modeset=0".
If you are interested in the details, you can search for problem reports related to radeon kernel mode setting.
View 3 Replies
View Related
Mar 16, 2010
Just got Ubuntu 9.10 and I'm liking it a lot, but my computer refuses to go into hibernate or suspend. I have a Dell M1530 but I don't really think it's a dell hardware issue because it's not just when I close the screen, it's also when I click suspend or hibernate from the menu.
View 2 Replies
View Related
Dec 15, 2010
I recieve the following error:
Cannot find swap device, try swapon -a
/bin/echo: write error: No such device
If I type swapon -a, I get something like this:
swapon: cannot find the device for UUID=4d79c009-9464-41d5-9f78-90644bca9ba3
It worked great before I did the upgrade... I've upgraded to 2.6.37-rc5.
View 11 Replies
View Related
Feb 9, 2011
The OS is Lucid 64-bit . Before I begin I must say suspend/hibernate works fine with 3 other machines, so I'm trying to find out what's wrong with this one. I tried [URL].. and also I tried changing acpi-support. It currently is as this:
[code]....
View 9 Replies
View Related
Aug 4, 2011
First of all let me introduce myself. My name is Rasheed and i am from UAE, after not having any reply from a week in Fedora's official forum i came across the linuxquestions through google and hoping to help others and resolve my issues as well with the help of experts here. So here is my problem what i am currently having. I am going through a serious issue right now. My laptop crashes when SUSPEND/HIBERNATE or unplugging the laptop's charger.
View 14 Replies
View Related
Jun 19, 2015
I'm running Debian 8.1 KDE on a 2007 dv6 laptop. Model number is worn off. lol but the specs:
Intel i3 first gen m 330
4GB RAM
Intel (ironlake) graphics
First off, closing the lid to my laptop doesn't trigger suspend, or anything no matter what I set it to in power options.
I can suspend using "systemctl" or suspend from the "Leave" menu, but upon turning my computer back on, my touchpad and keyboard don't work.
Sometimes, my touchpad will start working after about 15 seconds, but the keyboard doesn't come back. I have to hard reset.
I have a feeling it's something to do with systemd, but I'm not super proficient in linux. Just an end user who is friendly with a terminal.
View 6 Replies
View Related
Sep 28, 2010
I have Debian Squeeze x64 on ThinkPad T61p with standard 2.6.32-5-amd64 kernel. thinkpad_acpi loaded as module, suspend to RAM works fine from menu in KDE as well as by closing the lid, however machine doesn't appear to react on pressing Fn+F4 which should put it to sleep as well. I've read through thinkpad_acpi documentation and asked Google but so far can't find the solution. Can anyone, point me in correct direction?
View 6 Replies
View Related
Mar 18, 2010
When I put my computer running Ubuntu 9.10 into suspend or hibernate the screen goes black with a little flashing underscore in the corner and when I try to bring the computer out of suspend or hibernate nothing happens and I am forced to manually reboot.
View 1 Replies
View Related
Aug 1, 2011
everything works perfect including reboot and shutdown but not the hibernate or suspend (sleep). Whenever i try to do Suspend, my caps lock starts blinking and the screen goes white
View 2 Replies
View Related
Apr 29, 2011
I have already installed gnome-power-manager.
There should be the suspend and hibernate buttons in th System Menu, but there is only two options, Shut down and Log off.Also, in the Power Manager Preferences window, it has no option for suspend and hibernate.
How to add suspend and hibernate options?
View 7 Replies
View Related
Feb 16, 2011
Is there an "official" way to add suspend and hibernate functionality to the KDE logout/shutdown menu in Squeeze? What packages do I need?
ps. My computer is not a laptop - it's a normal desktop machine
View 1 Replies
View Related
Feb 26, 2011
I am having some pain with my new Squeeze installation, I am not sure if I am asking to much of it or it is an easy fix.
Firstly my system is laptop which I regularly plug a second monitor into. The video adaptor is an ATI HD4550 mobile.
My problem is that when ever suspend or hibernate my system, and even sometime when I boot up the screen(s) are just blank, although sometime they don't, it always happens if I suspend by closing the lid of my laptop, and only sometime happend with through Gnome is go ->System->Shutdown->Suspend. This is really annoying.
Another issue which I think is connected is that as I said I have a second monitor (most of the time) and when I boot up then it works until I log in, then a message pops up say the configuration can not be applied and it revert to Mirror mode or it does this thing where it places the second screen inside (virtually) the built in Laptop panel, it will not let me fix this through the monitors dialog just displaying the same message. I can fix this by doing
invoke-rc.d gmd3 restart
This gets as far as killing Gnome them it prints an error the to console, at which point Imopen a new terminal by ctrl+alt+f2 and
invoke-rc.d gmd3 stop
invoke-rc.d gmd3 start
then it works fine and even remember that I set the secondary screen to be the primary monitor through xrandr.
I tried install fgrlx drivers instead but it didn't really fix the issue, so I removed them.
View 5 Replies
View Related
Jul 9, 2011
I installed the debian 6 on the tninkpad T42, use the Suspend,it can entry the suspend state，I type the key let it come back, it can exit the suspend state, But the screen always display "black",can't come back the X window.
View 2 Replies
View Related
Oct 13, 2010
after i installed latest ATI proprietary drivers ( 9.3 legacy drivers) for my HP compaq nc6000 with a "Mobility Radeon 9600" the standby and the suspension stopped working, i mean, if i try to suspend or hibernate my laptop, it closes X (this is fine) but after it gets freezed on the whole screen black with just a blinking underscore and nothing more, neither an error message after reboot.All i can do is to force shutdown by pressing poweron button for 5 secs.I'm running on a lenny, stable with stable repo.What can i do to understand where does this problem comes from and maybe fix it?
View 3 Replies
View Related
May 23, 2014
I have a server with Debian Wheezy. I already setup Wake-On-LAN (from halt) and works just fine, but i need to have Wake-On-LAN from suspend or hibernate. None of them works, despite multiple solutions I tried.
The server is mainly used for remote backups and i will like to be able to suspend/wake on LAN automatically on certain period of time (when backups occur) or manually.
The first try was based on [URL] .... and [URL] ..... but without success.
I also tried: uswsusp and hibernate .. intended on using even TuxOnIce but looks complicate..
In BIOS there are some settings to manage the fans (Fan Speed Control Modes) which is set to 3 (Workstation). I also disabled all USB devices in BIOS (since i don't need them and i have read that some USB may create problems)
I used pm-utils and once i try suspend/hibernate the machine hangs with the fans still running ... and with some other hardware suspended.
Some info:
# acpitool -e
Code: Select all Kernel version : 3.2.0-4-686-pae20110623 - ACPI version : 20110623
-----------------------------------------------------------
Battery status : <not available>
AC adapter : <info not available or off-line>
Fan : <not available>
[Code] ....
Specs of Motherboard at [URL] ....
View 1 Replies
View Related
Dec 6, 2010
I've configured my debian lenny to load first the command line, then if i want I load the X server, but doing this to that way I don't have the suspend/hibernate functions from the gnome menu, so, my question is:
what is the command to suspend / hibernate my system at any moment I decide?
View 1 Replies
View Related
Dec 20, 2010
I use my laptop at the college, and I've to suspend him frequently. So, I've decided to install the package pm-utils, to hibernate my PC, instead of power off it. When I try to do "# pm-hibernate", a tty appear, and this error is displayed :
[3506.405310] pm_op(): usb_dev_suspend+0x0/0xa [usbcore] returns -2
[3506.405310] PM: Device usb1 failed to freeze: error -2
This is the result in pm-suspend.log :
Initial commandline parameters:
[Code]....
View 14 Replies
View Related
Aug 16, 2010
My Thinkpad T61 just got a Corsair X256 SSD in the ultrabay (where the CD usually is). This works well except for hibernating. Earlier I had a traditional HDD drive there which also hibernates just fine.After a failed hibernate the machine hangs with this message on screen:
ata1.00: status: { DRDY ERR }
ata1.00: error: { IDNF }
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: failed command: FLUSH CACHE EXT
[code]...
And looking in the kern.log I see this:
Aug 16 18:57:00 lap kernel: [ 175.690230] hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Aug 16 18:57:00 lap kernel: [ 175.690237] hda: task_no_data_intr: error=0x10 { SectorIdNotFound }, LBAsect=1207959552, sector=18446744073709551615
[code]....
View 3 Replies
View Related
Mar 9, 2011
I have Debian 6 (squeeze), I have also seen this under Ubuntu (can not remember how I fixed it). (has worked in ubuntu 10.10)I can hibernate, but when I switch on the system cold boots (it does not restore previous session).Note suspend works fine. Have looked in /var/log/pm-suspend.log Shows for each block of suspend suspend a block of resume suspend, but hibernate hibernate is not followed by resume hibernate ( I assume that is what is expected.)
View 7 Replies
View Related
Apr 13, 2010
I recently installed Ubuntu 10.04 Lucid Lynx. When I partitioned my HDD, I ran out of available partitions and so couldn't make a Swap Partition.I pushed on anyway, because I read here that you can create a Swap File instead of a partition that does the same thing. I've made the Swap File and it's activated (I know because during shutdown there's a message that flashes very quickly that says "Deactivating Swap [OK]".
But here's the real problem. My Ubuntu refuses to Suspend or Hibernate. The screen just goes black and the backlight stays on. Since one of the main functions of the swap file is to facilitate Suspend and Hibernate,I upgraded from 9.10 Karmic Koala, which suspended and hibernated normally.
View 9 Replies
View Related
Oct 4, 2010
Suspend worked before I completely reinstalled Testing from scratch. Now it seems to suspend OK, but when it tries to wake up it fails. Details here: [URL]
View 6 Replies
View Related
Jan 27, 2011
I have installed squeeze on a HP notebook. I have one small problem though.It does not resume from suspend. If I shutdown -> suspend, or close the the lid, or shut downs (suspends) as expected, but whenower it backup up, the screen just stays black.Hibernate is working fine.
output of lspci (if needed)
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
[code]...
View 14 Replies
View Related
Dec 18, 2009
I have a web server running on my laptop(in fact , it's a netbook). But I found it always hibernate automatically in a certain time .(In fact , I don't know what's the differences between hibernate or suspend. So I call this hibernate instead.) I am sure I have disabled the hibernate function in Power-Management from the System menu. But it still hibernates as usual.So could someone tell me how to disable it ( suspend,hibernate whatever )?
View 6 Replies
View Related
Mar 15, 2010
kubuntu 9.10, KDE 4.4.1, Nvidia driver 195
jeff@jeff-lappy:~$ sudo hibernate hibernate:Warning: Tuxonice binary signature file not found. Some modules failed to unload: nvidia hibernate: Aborting suspend due to errors in ModulesUnloadBlacklist (use --force to override).
I even installed this tuxonice thing but to no avail...
View 2 Replies
View Related
May 4, 2010
I can Suspend or Hibernate my Gateway notebook but I have no idea how to wake it up.The power button is set to suspend or hibernate....I not sure which it does, but I can't wake the computer up.
View 9 Replies
View Related
