I will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.
In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).
I was wondering if there was some kind of anti-spam proxy available for debian, that could serve as a layer between my ISP's mailserver and my email client. Something light, as it needs to be installed to a guruplug server with not much storage available. It would be great if I don't need to configure a fully fledged mail server but if it can function on it's own, only filtering spam messages. I already found assp and qpsmtp, but I find these very difficult to setup and assp is like huge.
I think I have encountered a problem in the way that lucid handles proxy servers. I was having problems running apt-get update due to a firewall at my work. I also noted that I was getting 403 Forbidden for wget. So I went to System -> Preferences -> Network Proxy from my account (which has administrator privileges) and input the http address for the proxy server, and then clicked the button to "Apply Systemwide...".
Following that change, wget worked from my account, but whenever I tried to sudo apt-get update, I got the 403 forbidden response again, even though I could wget the same files that apt-get reported as forbidden. I figured that this was a problem with the root account, and so I typed
Code:
However, upon exiting from the root account, and trying to run sudo apt-get update again, I got the 403 forbidden code again!
So, it seems that the proxy settings are not being applied systemwide.
I have a debian 8.1.1 server running owncloud and a proxy server at home. I have everything working fine, with one exception. The proxy server won't start on boot. If I ssh into the server, then run "sockd -D" as root, it starts up and runs just fine. Any guides I find refer to the init.d script method that worked in Wheezy, but that isn't working. I think it has to do with Jessie switching to systemd? I had used someone elses script in init.d, and ran update-rc.d, but it still doesn't start.
With Jessie, how can I make "sockd -D" execute on system startup?
I cannot seem to get e2guardian to work. I went into Ice Weasel to adjust the proxy connections but that just blocks off all internet activity. The problem seems to be with the configuration settings in the browser. I tried Privoxy with a completely new Debian install and have the same problem.
I would like to redirect traffic coming from a machine A through a SOCKS proxy (setted on machine B)Machine B run "ssh -D 4242". So that create a SOCKS proxy on machine B.Machine A would like to connect on the internet, but the only way is to use machine B SOCKS proxy. The problem is machine A don't know how to use SOCKS Proxy. (Actually, i can just set ip, netmask and gateway on machine A).So, I would like to set up something on machine B that will redirect all traffic coming from machine A throught the SOCKS proxy.
today i encountered centos 5.5 final server with a squid configured to block facebook from 9am to 4pm. i have tried to follow up the steps but am stack where time restriction is done and there is no proxy configuration done in the browser. the ip address of the server is being used as the default gateway.
I use openSUSE 11.1 and my YAST can't connect Internet: How to configure my YAST Internet configuration through proxy server in order to download and install the programs (for example dwnld and install WML from [URL])
I installed apache2 and mysql database on a Debian system. It is using reverse proxy on apache to redirect requests to apache2 running on any machine which is on Xen server as a Virtual host. I tried to install Drupal on it. Every thing went fine till I pointed my browser to: http://IP[/url] of LAN where Drupal was installed/drupal then I see an installation page of Drupal which welcomes me. I click install in English then it can not proceed to connect with database. Database configuration: Your web server does not appear to support any common database types. Check with your hosting provider to see if they offer any databases that Drupal supports.
I have created a database and username for Drupal separately. What should I check to. There is one more error http://Public IP/some location/ Is showing me contents of Document Root but there is a folder named drupal on it. When I click on it I get error. Not Found. The requested URL /drupal/ was not found on this server. Apache/2.2.9 (Debian) PHP/5.2.6-1+lenny8 with Suhosin-Patch proxy_html/3.0.0 Server at
What things should I check in for? I am also getting errors like: - Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName on individual DomU's what should I check in. and on Dom0 when restarting apache2 I get following error. - Reloading web server config: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName [Wed Apr 14 15:23:05 2010] [warn] NameVirtualHost *:80 has no VirtualHosts
I have installed and tried both squid version as transparent proxy but they just don't work.
I have eth0 which is where my internet comes in and eth1 which is my local network 192.168.1.0/255.255.255.0.
My default firewall policy is to drop input output and forward, i have already set my firewall to accept and workout the squid and it is working.
Here is the relevant rules i have on my firewall:
Code:
Here is the sample conf i am using for squid:
Code:
Always_direct allow all When using version 2.7.x i was able to make it transparent when i used the below rules:
Code:
I readed the Docs on the squid page but the above rules can't be reproduced to 3.1 and i don't wish to use such rules to make it transparent or hidden so i want some help to figure out why it inst transparent.
I have searched and searched for a reverse proxy solution for non-website traffic. TCP but not http, on ports other than 80, 443, 8080, etc. Basically I just need a TCP forwarder that works with multiple TCP servers, WITHOUT webpage caching features. I do not need or want any webpage caching. Can squid work as a reverse proxy for TCP traffic without http? The other program I came across in searching was HAproxy. Both programs are for http but I am curious if they would work for TCP servers that do not serve webpages.
I currently have my server setup with a web page and ssh. I am looking to find a way to access the internet from my work computer, but all proxies that I can find have been blacklisted...I can however access my home server webpage. Is it possible to create my own proxy so I can surf from my work laptop?
Will squid or HAproxy work to reverse proxy non-http traffic? I have searched and searched for a reverse proxy solution for non-website traffic. TCP but not http, on ports other than 80, 443, 8080, etc. Basically I just need a TCP forwarder that works with multiple TCP servers, WITHOUT webpage caching features. I do not need or want any webpage caching. Can squid work as a reverse proxy for TCP traffic without http? The other program I came across in searching was HAproxy. Both programs are for http but I am curious if they would work for TCP servers that do not serve webpages.
I am want to host a lot of SOCK5 proxies and would like to know what's the best software/Linux build that could suit for hosting proxies for a while sub net on once instance. So I want roughly 256 ipv4's on one machine, what's the best way of doing this? I have looked into Dante but would like to know if there is there any better software multiple proxies?
I would like to ask some help and tutorial for setting up and how to configure squid proxy server in my (Home PC Server). I am a newbie in Linux Centos. I already installed in my system the CentOS 5.5 . Now, I want to configure it as my internet server, all of my 4 system running in Windows including the laptop I want to connect through my CentOS pc with username authentication. I assign all IP address by static. see tthe attachement in my set up. [url] I just want to know what I need to change and add in my squid config file. And how can I configure properly my CentOS with 2 LAN card as internet server.
Currently my DHCP Server is working now what i want to have is auto detection of squid proxy in any browser but I still got an error in my dhcp server when I restart it.
My Config:
# DHCP configuration generated by Firestarter ddns-update-style interim; ignore client-updates;
I am *finally* getting around to rebuilding my file-sharing computer. I'll be sharing files with both Linux and Windoze machines. It's a home network, so there's nothing fancy needed. I know I have to tweak my smb.conf file until I'm satisfied with the features and security. I'm using SWAT and I'm starting with a bare-bones conf file. It's not secure but I can see the server and selected files/directories from my other Linux box.
My really dumb question is, do I have to reboot both the server and the client machines every time I change the SAMBA configuration? I thought I just had to stop and restart the SAMBA service in the SWAT software - but then the server disappears from my client. It looks like I need to reboot both machines for the client to see the server.
I am trying to set up my squid3 proxy as a transparent proxy - right now, I have to manually configure browsers to access via proxy. I understand that I have to put some rules into Iptables and also some further directives in the squid.conf.
I have a couple of specific questions. The proxy server is running on a Ubuntu 10.04 workstation and this machine also acts as a dhcp server for the network. I have just one subnet , namely 192.168.0.1-254 There is only 1 network card. Is it much easier to put in a second network card or is it just as easy to configure the existing lan card as a dual IP?
Is it necessary to configure these 2 IP's ( whether they are via 2 lan cards or dual IP on single card ) to be on different subnets. i.e ETH0 192.168.0.1 and ETH1 192.168.1.1 or is ok to have something like ETH0 192.168.0.1 and ETH1 192.168.0.254 ( where ETH0 is the one facing the LAN and ETH1 points to the modem router / switch i.e The Internet ) Where specifically do I save the Iptables rule configuration file and what must I call it ?
I am running Debian Sid, KDE 4.3.4 with kernel 2.6.33 on a dual core 1.6 GHZ Toshiba Satellite A100-VA3, 2G ram. I have 4 multimedia keys beside my main keyboard that I used to configure successfully using the KeyTouch-Editor, and then loading it via KeyTouch. My problem is KeyTouch worked great with KDE 3.5.x but now it doesn't work with KDE 4.x.x. Has anyone managed to get KeyTouch to work with KDE 4.x.x? Is it broken or am I missing some kind of trick to get it to work?
My touchpad just stopped working recently. It works in the framebuffer console, cat /dev/input/mice gives sensible output, X -retro shows a moving cross and it is completely functional during the gdm login prompt. But for some reason, it just stops responding halfway through the login process (roughly at the same time as gnome complains about my old laptop battery, if that is any help.) I run Debian Squeeze with Linux 2.6.32-5-686. The touchpad is a Synaptics PS/2 pad according to Xorg.
I do not understand the problem, actually. X seems unwilling to talk to my touchpad for some reason. When I run X manually from single-user mode, it complains that it cannot talk to my touchpad, but it works in the -retro test mode. As soon as gnome kicks in however, it stops working. synclient -l gives sensible output.
i have download debian 6.0.1 DVD, and installed corectly,i am using internet behind proxy, but i configure all the things thier and i still can ping to google from CLI bt i could nt update my system
I'm trying to install using windows 7 on a 2010 macbook pro. Firstly the network configuration won't work and secondly the cd rom can't be detected. I've rewritten the usb drive several times with no joy.
i've installed debian 8 on this laptop but can't use the nvidia card from nvidia-detect can't find the card but it work 'cause i can see it in the list of hardware, 3d controller the driver from nvidia don't work, and i had a problem with force installation and xorg.conf file.. how i can make it work ? the card it's nvidia 820m
I just followed [URL] .... and [URL] .... because I need to connect to an iDRAC. I can't get I never see the Java Web Start Plugin as an option. If I do test my Java version, I only get the IceTea plugin.
