I am trying to create a xen vm on CentOs 5.3 using the following config file:
name = "vm5"
maxmem = 512
memory = 512
vcpus = 1
[Code]...
I'm assuming that it can't find a driver for a cdrom - but I am not too sure of that.
I have a PXE/kickstart installation system running ok. I would like to build a custom installation x86_64 .iso with the i386 .rpms removed. Currently I install from the standard x86_64 iso, then go and remove the i386 rpm's with all the attendant problems and impact on docs etc. Has anybody tried this? Is it as simple as just deleting *i386.rpm and then building another .iso from the resultant installation tree?
View 9 Replies View Relatedi had installed open suse linux enterprise server 10.2 SP2 (x86_64) i successfully installed the operating system with adding more packages, but after going inside i cannot configure ethernet, though i have 2 ethernet ports, no ports has been found, i installed some drivers but i cannot found the ethernet , while giving command ifconfig i get this ,
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
[code]....
how i need to detect the ethernet card i updated more packages and configured network card but not connected...
I have installed live cd on usb pendrive. Everything works great. How can I find out which device driver it is using? Where are the device driver files stored? How do you specify the device driver when mounting a device?
View 3 Replies View RelatedI have a user Application for transferring the data from one PC to the other PC using Ethernet Port, can we create a device driver for that ?? that means it should act like a virtual device, if we write data into /dev/some file, it should go the other PC
View 3 Replies View RelatedI have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.
Using these instructions....
[url]
When I make the WLAN driver, I get this:
I'm a starter here in linux, I have written a driver code and in that, I register my character devices by passing 0 for the major number.
To set up I used to use mknod command from terminal to create node,
Is there any method to create node dynamically from driver code during initialization and delete them at cleanup time?
This is my first post, I hope I'm the the right place. I installed mysql mysql-server php-mysql perl-DBD-mysql libdbi-dbd-mysql via "yum install -y" on a server running CentOS 5.3 X86_64 The install completes successful with no errors, but once I start mysqld via "chkconfig --level 35 mysqld on" ; "service mysqld start" There are no errors in /var/log/mysqld.log netstat shows mysqld listening on 3306 and localhost is in /etc/hosts
[Code]...
I have an i5 Thinkpad running Windows 7 64-bit. VT is enabled in the BIOS. I have installed vmware server v 2.0.2 but am unable to install Centos 5.5 x86_64 as a guest OS. The steps that I followed are as follows:1. Created a new VM, specifying RHEL 5 64-bit as the intended guest OS (per vmware documentation - Centos is not available as a selection2. Downloaded all 8 iso files for Centos v5.5 64-bit3. Modified the CD/DVD drive to 'connect at power' and use an iso with the path pointing to the x86_64 iso 1 of 8When I power up the VM, the console window displays 'ISOLINUX 3.11 2005-09-02 Copyright (C) 1994-2005 H. Peter Anvin' and nothing else. The installation splash screen never appears. As a test, I downloaded the first of 7 iso files for the 32-bit version of Centos 5.5 and pointed the CD/DVD drive to that iso. In that case, the installation starts as expected. I would really like to get the 64-bit version installed and running.
View 3 Replies View RelatedHow do you find out which driver is being used for a certain device. Say that I run lsusb and I find "Bus 007 Device 002: ID 046d:c043 Logitech, Inc. MX320/MX400 Laser Mouse", how can I find out what the active driver for the device is?Also, is there some way to list all available drivers for a device? Is there a way to change the driver at runtime?
View 1 Replies View RelatedI have checked and double checked the .htaccess and httpd.conf to make sure everything is correct and I'm sure it is. I have AllowOverride set to All in the httpd.conf, Apache sees and is reading the .htaccess because I get a 500 Error when I put garbage text in the file. I'm lost now.
View 9 Replies View RelatedI made a duplicate of a Centos 5.5 system disk with dump (dd if=/dev/sda of=/dev/sdb). No device files for sdb were created, but I guess that's not too surprising. I rebooted, and the device files were created. But how would I create them if I wanted to avoid the reboot?
I looked around for info on mknod and MAKEDEV but didn't find a lot.
I am very new to this site. Is there a good tutorial on installing CentOS X86_64 on VMware Server Console?
View 2 Replies View RelatedI have been searching for a software package that will install on CentOS5.4 x86_64 or RHEL5.4 x86_64 that I can allow users to access via the Internet for online web storage, pictures and they can manage their space (quota would be enforced). I am not having much luck finding any software?
View 7 Replies View RelatedWhen I try to install CentOS 5.3 and when this dialog. Select device Driver to load. I try to install it on ASUS Server.
View 8 Replies View Relatedi`m trying to set up a Central Backup Server with BackupPC installed on CentOS 5.6 x86_64, My CentOS has Samba3x / Winbind integrated with Active Directory i found this nice Wiki http://wiki.centos.org/HowTos/BackupPC , to get my BackupPC installed. after installing RPMForge's repo and settin` up the priorities to the repos, http://wiki.centos.org/PackageManagement/Yum/Priorities i get the following error regarding Samba3x Conflicts , i dont wanna miss up my Samba Configuration to install BackupPC, even --skip-broken option does not work for me
[Code]....
Unfortunately I've had no luck with using the default intel driver. It's strange really, you can see the gnome screen for a split second then it turns the display off like it's activating the external monitor or something. If I change the driver to vesa everything is fine.
Here is my info.
2.6.18-194.el5 i686 i386
kernel-2.6.18-194.el5
centos-release-5-5.el5.centos
00:02.0 "VGA compatible controller" "Intel Corporation" "Mobile 4 Series Chipset Integrated Graphics Controller" -r09 "Acer Incorporated [ALI]" "Unknown device 048a"
00:02.1 "Display controller" "Intel Corporation" "Mobile 4 Series Chipset Integrated Graphics Controller" -r09 "Acer Incorporated [ALI]" "Unknown device 048a"
00:02.0 0300: 8086:2a42 (rev 09)
00:02.1 0380: 8086:2a43 (rev 09)
I installed VMware server on my CentOS 5 machine. I had problems getting that working. Then I installed VMware Workstation. That worked fine. Then I tried using VMware server, but apparently VMware Workstation deleted some of VMware Servers files. So, I uninstalled VMware Workstation. Then I tried to reinstall VMware Server, but rpm complains package VMware-server-2.0.2-203138.x86_64 is already installed
View 3 Replies View RelatedI run many 5.2 virtual machines inside of VMWare ESX3.5 I've updated a couple of test VMs from 5.2 to 5.3. The thing that stands out is that during boot time, the sequence gets to this stage:
device-mapper: dm-raid45: intialized v0.2429 Waiting for driver initialization.
Here it takes about 3 times longer than the previous Centos 5.2 (about 9 seconds instead of 3). Whereas inside a physical box the wait in 5.3 is the same as it was in 5.2
I've got a 64-bit CentOS 5 setup and I'm trying to run startx, but when I do I get:
I tried changing the display driver to i810 in xorg.conf but it can't find that module either.
In my CentOS5.4, I can found the v4l2: integrated Camera in the aMSN, and the Camera1 in the Channels But I can not run it How cam make my webcam work?
View 1 Replies View RelatedWhen i put the command: /etc/init.d/vboxdrv setup for install it it say this:
Stopping VirtualBox kernel module [ OK ]
Recompiling VirtualBox kernel module [FAILED]
(Look at /var/log/vbox-install.log to find out what went wrong)
[root@server ~]#
and
the log:
Makefile:185: *** Unable to find the folder to install the support driver to. Stop.
How do I find out which package (rpm) contains the ipg (network driver) module?
View 1 Replies View RelatedI'm trying to find a driver for my wireless card (Atheros AR928X) and I think it's ath9k what I need. As far as I know there isn't a linux driver for it, so I installed ndiswrapper to use a windows driver instead. The problem is that when I type modprobe ndiswrapper I get "bash: modprobe: command not found" (even as root). I know I'm missing something about modprobe, but I can't find any help on google. Anyway, I installed ndisgtk next, because I thought it would be easier, but when I go to System> Administration> Windows Wireless Drivers I get a message "Unknown error".Do you have any ideas on how I'll make ndiswrapper work?
View 3 Replies View RelatedI am trying to clone a working Centos 5.4 system onto a new box with a ASUS P5KPL-CM motherboard. I have done so by plugging in a Realtec lan card - but can't get the motherboard lan working. Googling tells me the motherboard has a Atheros L1E lan chip - but I have installed several kmod drivers from ELREPO - but still can't get the on-board lan working. So far I have installed:
kmod-atl1e
kmod-atl1
I have just installed these with yum - but no new hardware appears in the network gui dialogue. Am I missing some step here - or is there another driver I should be looking for.
I am unable to find Atheros AR8132 PCI-E Ethernet Controller driver for CentOS which is installed on my netbook.
I contacted DELL to provide me the driver and they said that they do not support Linux on netbook and I have to arrange it myself.
I told them that I don't need help in installing I just need the driver file to which they said that they don't have driver for Linux.
NIC is getting detected and works fine on the same netbook (Am dual booting Windows7/CentOS) with Windows7
When I type: ls -l /dev/ it does not show up eth0. Same result with ifconfig. When I type lspci | grep net it does show up something like Atheros Communications AR8132 L1 PCI Gigabit .
When I try this yum install kvm qemu libvirt python-virtinst qemu-kvm I become this error
Transaction Check Error: file /usr/share/man/man1/qemu-img.1.gz from install of qemu-img-0.10.5-1.el5.2.x86_64 conflicts with file from package kvm-qemu-img-83-164.el5_5.25.x86_64
how can I resolve this error
Where can i find driver for Dell Wireless 1397 802.11b/g Half Mini Card. I'm using CentOS x86_64.
View 9 Replies View RelatedI am in the process of building a new server on an Asus P5QPL-AM motherboard and an Intel E8600 processor.explain to me the difference between the two versions and what would you recommend.Also, is there any advantage of SATA over IDE hard drives?
View 1 Replies View RelatedI've installed the CentOS 5.1 from a CD only yesterday and everything is working fine except Mysql that came from the CD distribution. I have detected that my system has mysql.
[root@onion /]# rpm -qa |grep mysql
mysql-5.0.22-2.1.0.1
[root@onion /]# find . -name mysql
./usr/bin/mysql
./usr/share/mysql
./usr/lib/mysql
However I'm unable to find mysqld, safe_mysqld or mysql_install_db in my filesysytem.
[Code]...
