CentOS 5 Hardware :: Can't Find ATHEROS L1E Lan Driver ASUS P5KPL-CM Motherboard
Apr 8, 2010
I am trying to clone a working Centos 5.4 system onto a new box with a ASUS P5KPL-CM motherboard. I have done so by plugging in a Realtec lan card - but can't get the motherboard lan working. Googling tells me the motherboard has a Atheros L1E lan chip - but I have installed several kmod drivers from ELREPO - but still can't get the on-board lan working. So far I have installed:
kmod-atl1e
kmod-atl1
I have just installed these with yum - but no new hardware appears in the network gui dialogue. Am I missing some step here - or is there another driver I should be looking for.
View 5 Replies
ADVERTISEMENT
Feb 12, 2009
I have PC with motherbord P5KPL-AM (latest ver. BIOS), and i want installation CentOS 5.2.But can't screen attaching....
View 5 Replies
View Related
Jan 5, 2010
I'm trying to find a driver for my wireless card (Atheros AR928X) and I think it's ath9k what I need. As far as I know there isn't a linux driver for it, so I installed ndiswrapper to use a windows driver instead. The problem is that when I type modprobe ndiswrapper I get "bash: modprobe: command not found" (even as root). I know I'm missing something about modprobe, but I can't find any help on google. Anyway, I installed ndisgtk next, because I thought it would be easier, but when I go to System> Administration> Windows Wireless Drivers I get a message "Unknown error".Do you have any ideas on how I'll make ndiswrapper work?
View 3 Replies
View Related
Jun 26, 2011
I am unable to find Atheros AR8132 PCI-E Ethernet Controller driver for CentOS which is installed on my netbook.
I contacted DELL to provide me the driver and they said that they do not support Linux on netbook and I have to arrange it myself.
I told them that I don't need help in installing I just need the driver file to which they said that they don't have driver for Linux.
NIC is getting detected and works fine on the same netbook (Am dual booting Windows7/CentOS) with Windows7
When I type: ls -l /dev/ it does not show up eth0. Same result with ifconfig. When I type lspci | grep net it does show up something like Atheros Communications AR8132 L1 PCI Gigabit .
View 4 Replies
View Related
Jul 24, 2009
I need to put a pc together for home use to act as my server. I need recommendations for a asus motherboard. I need it to support 5.3 and looking at asus website I cannot for the life of me figure out what I need. I also want to use a amd cpu. It has been years since I built my own pc and never for linux
View 3 Replies
View Related
Feb 24, 2010
I cannot get sound from a machine that has the M4A785-M motherboard, and a Radeon HD 4670..
My details are at: [URL]
View 7 Replies
View Related
Mar 3, 2010
Just installed CentOS 5.1 and it's not detecting my NIC. ifconfig produces nothing for eth0. This is a xen kernel.
I can't tell exactly what NIC this motherboard uses, the ASUS website doesn't seem to think we need to know anything more than that it's a PCIe Gigabit lan:
[URL]
lspci indicates it's an Atheros AR8121/AR8113/AR8114.
View 5 Replies
View Related
Mar 23, 2010
where to find atheros ar8131 driver for suse linux 9.1
View 14 Replies
View Related
Apr 9, 2010
I have a PCCHIPS P47G motherboard, with a Atheros AR8112 ethernet interface (took me a while to even find that out!). I can not find a driver for that interface! I've Googled around for drivers and come up with nothing.
View 1 Replies
View Related
Mar 20, 2010
i just instaled bt4 on my hdd and i have a problem with instaling drivers... i cant find and install driver for my video card nvidia 8200 integrated on motherboard. exacly i got the problem with changeing video resolution... i have only 640x480 and 800x600, and here is the problem, i cant put it in 1024x768..
View 6 Replies
View Related
Jan 17, 2010
I have a newly installed CentOS 5.4 on Gigabyte G31M-ES2C, I had to change the motherboard since it has some problems. Unfortunately the new motherboard is a rev 2.x board, which has a different onboard NIC (old one is RTL 8102E, new one is AR8132), so now my ethernet connection doesn't work anymore (no eth0 device), I assume I need to install a new driver for the AR8132? If so, what's the steps to do so?lspci shows Ethernet controller as: Attansic Technology Corp. Atheros AR8132 / L1c Gigabit Ethernet Adapter (rev c0)
View 3 Replies
View Related
Feb 9, 2011
I have CentOS 5.5 and I can't install the driver for the Atheros AR5006X Wireless.The current state of my CentOS is:
*) If I run lspci, I get 03:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01) (wrong model)
*) If I go to System->Administration->Network, I see the wlan0 device with xlan0 name, but if I tried to active I get: (and the same when the system is rebooting)
Error for wireless request "Set Mode" (8B06):SET failed on device wlan0 ; Invalid argument. Determining IP information for wlan0...
View 7 Replies
View Related
Jul 7, 2011
I have installed CentOS. I have two ethernet card (one onboard and one PCI). I am able to set ip for realtek ethernet card and my atheros(on board) is not shown in network ifconfig shows only one ethernet card (PCI) hen i gave the command lspci i got the following output
01:00.0 Ethernet controller: Atheros Communications AR8132 Fast Ethernet (rev c0)
03:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
View 4 Replies
View Related
Jun 14, 2010
I don't get any sound with any version of Lenny on my new ASUS M4A785TD-V EVO motherboard. However the sound works fine when I boot from the Debian Live 60 Alpha1 AMD64 KDE DVD. I can always wait until Squeeze is released and then do an upgrade but I'd like to get the sound working now. Any suggestions?
View 3 Replies
View Related
Jun 13, 2011
Having just Installed Ubuntu 11.4, I require LAN drivers for ASUS A8N5X Motherboard. Where can I get the drivers? And instructions on how to install them.
View 7 Replies
View Related
Jun 25, 2010
no sound with motherboard Asus M4A78T-E for fedora 13
View 7 Replies
View Related
Dec 24, 2009
I have driver DVD for ASUS motherboard. This DVD has drivers (motherboard and audio) for Linux, how do I install these packages.
When I tried installing these with package installer, it says cannot install the packge.
View 4 Replies
View Related
Apr 6, 2011
I just assembled a new computer with Intel Core I3 processor and Asus P8H67 motherboard and 4 MB of memory. It has a 2TB Hitachi Deskstar Hard Drive and Asus DVD. I am trying to load Ubuntu 10.10 directly (without first loading Windows) without success.
I have tried 4 separate downloads of Ubuntu - 64 bit, 32 bit with Desktop and Alternative. I have changed a variety of parameters and various tricks suggested on other threads. The Desktop (32 and 64) versions get me to Busybox shell with message (Initramfs) Unable to find a medium using live file system. The Alternative version hangs with the messages:
RAMDISK: Couldn't find valid RAM image startgin at 0;
No filesystem could mount root, tried ext3, ext2, ext4, fuseblk;
Kernal panic - not syncing VHS;
Unable to mount root fs on unkown block(1,0).
For parameters I think have tried them all (but not in all combinations). I tried exiting twice from BusyBox as suggested on forums but that just hangs the system. I also turn off the quiet and splash to try and see what is going on....but it is too complex and goes to fast for me to follow.
A final suggestion was that the P8H67 is too new for Ubuntu 10.10 and to try the new version 11 coming out...I am new to Linux and reluctant to try a Beta
View 3 Replies
View Related
May 9, 2011
The motherboard has a SiS190 100/10 Ethernet Device. Apparently it worked once during installation and then never again. But it works fine in Win XP (in fact I have SlackWare installed in dual boot) My Internet connection is throgh an ADSL.17 may: one thing led to another and now I have more things to do and learn that time yo do it. smallpond's answer has been very important un showing the way, but Iḿ still working on it
View 1 Replies
View Related
Dec 4, 2010
installing drivers for my onboard NIC card on my ASUS Nettop EB1007. The NIC is a JMC250 PCI Express GB. I first installed CentOS 5 on it and then it wouldnt show up. So I decided to try installing with Ubuntu and it was perfect. I didnt have to do anything else to get it detected. However, I would like CentOS 5 on this unit to practice on. Below is my attempt to install the kmod-jme-1.0.6.1-2.el5.elrepo.i686.rpm on a fresh CentOS install. Unfortunately, the dependencies are failing.
[root@localhost media]# mkdir /media/usb
[root@localhost media]# mount /dev/sdc1 /media/usb
[root@localhost media]# cd /media/usb
[root@localhost usb]# ls -a
[Code]....
View 3 Replies
View Related
Mar 17, 2016
I can't hear any sound in Debian with my new Asus motherboard . In Windows i have no problem.
Linux was reinstalled from scratch and speakers are connected to the green port of the motherboard.
I tried to find a solution all around the web without success.
Here there are links to some specs and logs of my system and to the log of alsa-info.
[URL] ....
View 6 Replies
View Related
Jul 6, 2010
I'm starting to spec out a new GNU/Linux boxen. I'm considering the ASUS P6X58D Premium motherboard. Has anyone had any experience with this board in terms of compatibility with openSUSE 11.2/11.3? I'm mainly concerned about:
on-board sound: Realtek ALC889
ethernet: Marvell 88E8056
new interfaces: SATA3, USB3.0
being able to use: AHCI (which I had to turn off on a netbook, Acer Aspire 1410, for hard drive stability), 64-bit kernel I'm planning to use an i7-930 or i7-950 (should the price drop in August as rumored) with 6 GB DDR3 1333 RAM (not planning to overclock, as yet). The graphics card will probably be an NVidia GT240 or so (budgeting about $100 for the graphics card).
Also, I'm hoping to move some old IDE drives over using IDE->SATA 1 bridge cards. Any advice on this? Or should I just get a new SATA 3 drive? For the optical drives (DVD RW/CD RW), I'd like to use bridge cards since there's no benefit for the higher speed SATA interface, or is there?
P.S. For the naive question: As I haven't dealt with 64-bit installs before... I would need the 64-bit kernel for full access to all the extra address space, correct? After that, I can still run 32-bit apps, with a slight speed penalty?
View 1 Replies
View Related
Dec 21, 2010
This is really not a Linux or SuSE question. However, the folks on this forum are polite and knowledgeable, so I will give it a try.In the process putting together a new computer.About 99% confident in the following:otherboard: ASUS Crosshair IV FormulaCPU: AMD Phemon II X4 955Graphics card: Gigabyte GV-R685D5RAM: Unknown. ASUS, as well as several other motherboard suppliers, have not approved of any 1x4GB DDR3 RAMS. Has anyone had success with getting a 1x4GB DDR3 RAM to work on the ASUS Crosshair IV motherboard?
View 2 Replies
View Related
Apr 30, 2011
Code: Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
wlan0 IEEE 802.11bgn ESSID:"DUSTINSEE"
Mode:Managed Frequency:2.427 GHz Access Point: 00:22:2D:A2:D9:48
Bit Rate=150 Mb/s Tx-Power=13 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:on
Link Quality=62/70 Signal level=-48 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:5 Invalid misc:31 Missed beacon:0
it takes 3-4 refreshes to make a page load, when i apt-get something, my speed is an average of 400 bytes per second. Making it impossible to get anything done. its been like this for a while, i figured it was a bug in 10.10 and ignored it since 11.04 was coming soon. And with windows everything is fine. I'm getting very sick of this. Can somebody please help me? If you need more info, just let me know.
View 9 Replies
View Related
Sep 17, 2010
So I decided to wipe out Windows and try Slitaz. It's an awesome well featured distro for it's size. One huge problem tho: I can't get wireless to work for the life of me. I actually went as far as to manually load the ath5k module but It just refuses to recognize my wireless router, much less any nearby routers. It simply doesn't see anything when it scans for wireless networks. I have no problem with that in Puppy Lucid. But I'd really like to use Slitaz, just for it's small size and quick bootup. Can anyone PLEASE help me with that?
PS: It happened here before that I had to plea and beg for any response, so PLEASE(!!) don't let me hang like that this time.
View 4 Replies
View Related
May 23, 2010
I just lost my weekend trying to install Xubuntu 10.04 on my pc I made the ps a while back - its built on a ASUS P4S800D-E motherboard and it has an ATI Radeon 9200 LE graphics card. It has a PS/2 keyboard and mouse, 1Gb of memory and a 160Gb PATA/IDE hard drive (I unplugged the SATA drives) Every time I installed or made a tweak to the config it failed in the same way. It showed its failure by continually repeating the first character typed. Regardless of whether this was the password screen for synaptic or just the first character typed into a terminal. Until the first character was typed the mouse seemed to work ok but then it would stall too
I've tried most things, running Xorg with/without an xorg.conf file, loading the ppa kernel and tweaking loads of bios and grub boot parameters all to no avail. So I think I want a more linux friendly graphics card and I fear I may need a new motherboard. Can someone recommend a replacement graphics card for this motherboard? Can anyone reassure me that my motherboard is ok with linux?
View 1 Replies
View Related
Nov 20, 2009
I've got a 64-bit CentOS 5 setup and I'm trying to run startx, but when I do I get:
I tried changing the display driver to i810 in xorg.conf but it can't find that module either.
View 12 Replies
View Related
May 18, 2010
In my CentOS5.4, I can found the v4l2: integrated Camera in the aMSN, and the Camera1 in the Channels But I can not run it How cam make my webcam work?
View 1 Replies
View Related
Mar 19, 2011
I just upgraded to an ASUS P8P67 Pro (Sandy Bridge) motherboard and moved my old hard drive to the new case. Windows 7 and XP are running smoothly. Ubuntu, however, doesn't detect the Ethernet adapter or doesn't have a suitable driver. ASUS doesn't offer Linux drivers for this motherboard. Is there a way to make Ubuntu revert to a default, working driver?
View 2 Replies
View Related
Apr 27, 2009
I am trying to create a xen vm on CentOs 5.3 using the following config file:
name = "vm5"
maxmem = 512
memory = 512
vcpus = 1
[Code]...
I'm assuming that it can't find a driver for a cdrom - but I am not too sure of that.
View 4 Replies
View Related
