How do you find out which driver is being used for a certain device. Say that I run lsusb and I find "Bus 007 Device 002: ID 046d:c043 Logitech, Inc. MX320/MX400 Laser Mouse", how can I find out what the active driver for the device is?Also, is there some way to list all available drivers for a device? Is there a way to change the driver at runtime?
View 1 RepliesI tried all the threads to load and compile the driver for the Belkin wireless-N F5D8053 (Ralink RT2870 chip) I still cannot get it to come up - the wireless status says device not ready. Here is some of the system info relating to the adapter:
terry@terry-desktop:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:14:bf:53:02:8f
inet6 addr: fe80::214:bfff:fe53:28f/64 Scope:Link
[code]....
managed to get things working so well on my laptop i thought i'd install ubuntu onto an external drive so i can boot to either xp or Ubuntu whenever i want, when i started up after the install it doesn't recognise the drive i loaded it to and appears to have lost the link to xp. the exact words are:
error: no such device: 4368f21f-d1b6-4c60-8c6b-4d2d38d16920.
grub rescue>
what i can do to get my xp back, my wife uses the xp and will kill me if i don't sort it, fortunately the comps unrealiable anyway!
I have a Macbook Pro which i want to install Opensuse 11.2 64bit(Upgrades to 11.3) The problem is that once i install opensuse and then boot via rEFIt, it loads up till the desktop is supposed to appear. All i get at this stage is darkness with a few coloured shapes in the background (Video driver not loaded).I can however reboot and go in via the failsafe option. Once in here i can use the GUI. I am a total noob with linux, can some one give me the instructions on how to install this driver. Its driving me insane. When i run uname -r, the results are 2.6.33-6-default I have added the following http repository (download.nvidia.com/opensuse/11.2/)
View 3 Replies View RelatedUsed to work perfectly. I attempted to install VPN client, result is can't connect to anything. Networks are seen by network manager, nothing happens when click connect. Results below:
Wireless LAN present in Hardware information. Atheros AR242x 802.11abg Wireless PCI Express Adapter (wlan0)
Kernel Driver: ath5k
168c:001c
/var/log/boot.msg
[code]....
Advice is to use output of dmesg command to find problem, but as above I don't get any results for this in terminal.
attempt to ping external site
linux-cfi6:~ # ping -c 66.70.73.150
Usage: ping [-LRUbdfnqrvVaA] [-c count] [-i interval] [-w deadline]
[code]....
I am trying to create a xen vm on CentOs 5.3 using the following config file:
name = "vm5"
maxmem = 512
memory = 512
vcpus = 1
[Code]...
I'm assuming that it can't find a driver for a cdrom - but I am not too sure of that.
I have a device /dev/ttyS4 and i wanna know which driver it uses.The problem is:If i compile a new kernel with the same configuration-file the device /dev/ttyS4 is away.So i wanna know which driver it uses.
View 4 Replies View RelatedI also the same problem, just that I can not proceed in the same way because I use Ubunto, what should I do to install the MySQL driver on my PC?
View 1 Replies View RelatedHow one could determine (for use in a Bash or Python script) which device (eg /dev/sda1, /dev/hda1... etc) a ramfs was loaded from when booting from a USB drive.
I have a RIPLinux/Tinycore live USB disk that automatically needs to run a script that is stored on the same USB drive but not part of the RIPLinux/Tinycore image. (Please note that I do not want to put this script into the RIPLinux image.) I therefore would like to remix the RIPLinux/Tinycore ISO to automatically run this script once it has started up. After RIP linux has booted I would like to automatically mount the USB drive that RIPLinux/Tinycore was booted from. I need help detecting which device this is.
I am hoping there is somebody out there who might recall DPT hardware and be able to get it to work under Linux. DPT were bought up by Adaptec but made great SCSI cards. The PM3334UW is a true hardware raid device which I have been using in SOHO environment for the last 7 years or so with IBM Warp 4.52 (MCP2). The box, although legacy hardware is sound and I wish to keep it running but hoped to have an openSUSE option. Unfortunately I cannot find a driver for the SCSI RAID card. There are a good deal of posts concerning eata_dma.c and other eata based drivers as possibles but when I load the eata driver that is available when loading openSUSE 11.3 I am asked for parameters and I haven't a clue what these should be.
View 4 Replies View RelatedThere are so many system information tools i figure that this one would be in the set. I just can't seen to find it.
View 9 Replies View RelatedI would like to ask some questions about checking which driver loaded for a hardware. Information: I am using Ubuntu and Xubuntu version 9.10.
1. For all types of hardware (including but not limited to network adapter, video card, sound card, USB devices, etc), if the command 'lshw' configuration does not show the loaded driver for a hardware, but the hardware work perfectly, is there any other way to know which driver loaded for that hardware WITHOUT ANY RESEARCH ON THE INTERNET, (and for network device, without using "connection information" feature in NetworkManager) ? If yes, how to do it?
2. Does your answer in question 1 will work for external hardware (hardware based on USB, FireWire, etc) and also the other non-pci based hardware? If it will not work, any other ways?
3. For your answer in question 1 above, do I need to install any packages that was not installed by default during Ubuntu installation?
4. For network hardware, "connection information" feature in NetworkManager does show the driver information. But, like stated in question 1, "lshw" command does not show the information about the driver used, then how NetworkManager get information about the driver used for a network hardware?
How to control the driver order be loaded by linux.
For example: I have two ethernet card is A and B. Sometimes A be loaded first sometimes another. How to control A card be load first in every times?
after some yum update on my CentOS 5.6 server I noticed this error when the server is booting:
"dm multipath kernel driver not loaded"
I am trying to get my VM to work. It tells me the virtual box Kernal driver is not loaded, how do I get started on getting this to work.
View 1 Replies View Relatedi found this quote: WPA/WPA2 are broken in every module everybody has tried (AFAIK) since Adam's 1.7.1.1 DKMS driver. Downgrade like so: 1) Get the driver from [URL]... 2) Go to terminal, and move the pre-installed driver so it won't get loaded. cd /lib/modules/2.6.28-11-generic/kernel/drivers/staging/rt2860/ sudo mv rt2860sta.ko rt2860sta.bak. 3) Install rt2860-dkms_1.7.1.1_all.deb. It will also install dependencies needed to compile the driver. If it doesn't retrieve the right packages, make sure "build-essential", "linux-header-generic" and "dkms" is installed. Let it run and it should complete without a problem. 4) Restart. The new driver should work automatically. the deb file gives me an error.
View 9 Replies View RelatedI need to run another little GUI application xyz after Firefox gets loaded up fully. How do i find that firefox has fully loaded?If i runQuote:
#!/bin/sh
firefox
xyz
[code]...
I used to have FC11 installed with the nvidia supplied binary driver. Worked fine, very stable. Trying FC12 and FC13 live CDs caused a hang, so I stuck with FC11. FC14 live CD did boot so I backed up my own files and did a clean FC14 install. Upgraded to get kernel 2.6.35.6-48, installed the nvidia driver from RPMFusion (260.19.21) and had a working system! Now, after a cold boot, the kernel always hangs during boot. Tried a number of kernel boot option (apci=off, noapic and a few others too). The hang is not always at the same place. The earliest it has hung is after:Disabling lock debugging due to kernel taint
Sometimes its a few lines later at:NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.12 ...(which would seem to imply that the hang can even occur a step or two before the actual driver is loaded!)
Sometimes it keeps going for a few more seconds and randomly hangs during some other driver load.
Without a specific nvidia driver the system always boots ok, so I'm pretty sure its the nvidia driver but I just can't seem to get a handle on this in a reproducible way. Sometimes, when I have make some other change, it will boot and work ok, but a reboot locks it up again (for example, in case it was SELinux, I disabled it and on the next reboot it booted and worked ok. Then, next boot, it wasn't working again). When I make changes, I reboot using the previous kernel, make the changes and reboot, with an occasional success. Once I start rebooting using the latest kernel, it always hangs.
I'd love to get a solution to this, but even some advice on debugging this would be appreciated!
I'm using 8600GT, 256Mb, PCIe card in a MA69VM motherboard with 3Gb of RAM.
I'm trying to get Ubuntu 10.04 running on a PCM-9343 board from Advantech. To do so I followed the instructions in this file from DM&P [URL] I installed a text-only Ubuntu using the alternate installer on a CF card that was connected to my PC. After reboot I downloaded the given kernel and updated the installation on the card, as said in the instructions. Inserting the card into the PCM-9343 gives a working Ubuntu Installation. So far so good.
The only thing not working is networking. The ethernet adapter is not loaded on boot, neither can I up it after logging in using "ifup -a". I found out, that the driver was not loaded during booting, i.e. the module r6040 didn't show up on "lsmod". The module is included in the modified kernel, that I downloaded from the producer's page. So I added it to /etc/modules and rebooted. Now it's loaded, but still no eth0. Ifup -a gives the following messages:
[Code]...
I have an HP Designjet z3200ps but I cannot find a linux driver for it. What should I do now ?
And I'm also wondering if the linux driver for etc device is not developed, what should the Linux gurus do ?
I am trying to find out the command to list all the devices mounted at boot-time.
View 5 Replies View RelatedI am currently using fedora 11 kernel 2.6.29 version, i wanted to write device driver for usb to detect my own device. My project is radio with computer. My fm radio get connected to usb port so i need to write h/w interfacing program.
View 1 Replies View RelatedThe error "USB device 6 (vend/prod 0x603/0xf2) is not claimed by any active driver." is in dmesg every time I connect my Logitech keyboard to my system. I also tried (all with the same error):
- Memory stick
- DVD-burner
- Compaq mouse
Recently, I created a device sc0 through device mapper. The divice could be found in /dev/mapper/sc0. My problem is that the device doesn't exist in /dev/partitions which will block my following test.BTW, I found dm-0 in /dev/partitions. Is it the same as /dev/mapper/sc0? But the device /dev/dm-0 doesn't exist!
View 2 Replies View RelatedIm trying to connect my webcam (Trust 16175) to a Debian 5 box:
Installed:
And with no luck - as I see it the correct driver is not loaded - Using "modprobe gspca" makes no different. I have seen in some papers that the 093a:2621 is supported by gspca. How do I get it to work?
I've bought an X10 Home Automation USB interface: the CM15.
This is the information lsusb gives:
skerit@KIP-DU-SKER:~$ lsusb Bus 008 Device 002: ID 0bc7:0001 X10 Wireless Technology, Inc. ActiveHome (ACPI-compliant)
But this tells me nothing about where the device file is! How can I find that, or create one myself?
find a nvidia driver GEFORCE G102M. and my laptop model is ASUS K40IN.
View 4 Replies View RelatedI have a Lenovo T410 laptop. I'm unable to find drivers for the ethernet card, the wireless card and graphics. I don't even know what hardware is installed in the system. Here is the product ID if it can help in identifying the hardware.
Product ID : 2516CTO
I can't find a be2net driver for the emulex nc553i nic that is being used on the HP 460c Blade G7. I tried to build one from the src rpm provided on the HP site but it fails looking for a be_xmt function.
View 3 Replies View RelatedI can not install a driver for device EDUP WU2070. I have a disk with a driver for linux general. I don't know how to compile a makefile. My OS 11.3v doesn't see a device.
But when I run in Live CD mode all drivers install automatically and my WI-FI device work properly.