Networking :: Unable To Find Atheros AR8132 PCI-E Ethernet Controller Driver For CentOS / Fix It?

Jun 26, 2011

I am unable to find Atheros AR8132 PCI-E Ethernet Controller driver for CentOS which is installed on my netbook.

I contacted DELL to provide me the driver and they said that they do not support Linux on netbook and I have to arrange it myself.

I told them that I don't need help in installing I just need the driver file to which they said that they don't have driver for Linux.

NIC is getting detected and works fine on the same netbook (Am dual booting Windows7/CentOS) with Windows7

When I type: ls -l /dev/ it does not show up eth0. Same result with ifconfig. When I type lspci | grep net it does show up something like Atheros Communications AR8132 L1 PCI Gigabit .

View 4 Replies


ADVERTISEMENT

Ubuntu Networking :: Atheros AR8132 Ethernet No Longer Detected?

Mar 1, 2010

I have an absolutely bizarre hardware issue (concerning the Atheros AR8132 PCI-E Fast Ethernet Controller) that has been giving me quite a bit of grief for a while, and having completely hit a wall on this one, I'm a reasonably-experienced Linux user of several years, and have been running Ubuntu 9.10 on an Acer AOD250 netbook for several months out. I know that this model has wireless issues out-of-the-box (easily fixed), but it did not have any noticeable ethernet issues. That is, until I attempted an installation of Arch Linux.

During the Arch Linux installation, the ethernet card was initially detected, but unable to be used (because of a bad module in the kernel released with the installer). As I didn't know the fix for this at the time, I decided to reinstall Ubuntu 9.10. This time, however, the system failed to recognize the wired ethernet whatsoever. Instead, the external activity lights for the port (green and orange) are ALWAYS on, yet the device doesn't function.

I have done a successful install of the latest drivers directly from Atheros for the device and have them automatically loading with the kernel during boot, but as the device isn't recognized, the drivers aren't doing any good. Relevant information:

Code:
root@niobium:~# lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)

[Code]...

View 3 Replies View Related

Networking :: Ethernet Intel Gigabit Controller Is Broken Or That Atheros Driver Is Missing?

Apr 21, 2011

I have an ASUS P5Q PRO motherboard with an integrated Atheros AR8121/AR8113 PCI-E Gigabit Ethernet Adapter.I installed Ubuntu 10.04 "Lucid" 64bit Kernel version 2.6.32.21 I have read that the driver isn't in the kernel, but there's a strange thing :

First if I try to run lspci from command line it doesn't reports Atheros Ethernet Controller.

Second If I try to run lshw -C network from command line it doesn't reports Atheros Ethernet Controller.

Third if I run ifconfig it only returns my loopback address.

Can I suppose that my Ethernet Intel Gigabit Controller is broken or that Atheros driver is missing?

View 4 Replies View Related

Hardware :: Unable To Find Atheros AR8112 Ethernet Driver?

Apr 9, 2010

I have a PCCHIPS P47G motherboard, with a Atheros AR8112 ethernet interface (took me a while to even find that out!). I can not find a driver for that interface! I've Googled around for drivers and come up with nothing.

View 1 Replies View Related

General :: Atheros AR8132 Ethernet Not Detected In BIOS Or Ubuntu On Acer Aspire One D250?

Jan 14, 2010

Code:

leopard@brokenbox:~$ lspci | grep Ethernet
01:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)

Code:

leopard@brokenbox:~$ ethtool -i eth0

Cannot get driver information: No such device

Code:

leopard@brokenbox:~$ ifconfig -a
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host

[code]....

I have had this issue before, and fixed it by booting into Windows XP SP3 and pressing and holding the power button down until the computer shuts down. (e.g. "Unclean or "Illegal" or "Cold" boot.) Unfortunately, not having Windows XP SP3 on my system anymore, I have to do this in Ubuntu. I have tried several times, and it is clearly not working. I don't want to try too many times more for fear of damaging my ext4 file system.

I looked for this issue on Google and found only driver problems, not device problems. There is no Ethernet option in the BIOS, except for the Network Boot, which should always show the device whether its in use or not. Is it silly to ask if Windows in a VM in an unclean shutdown may solve the problem? The driver for the device is currently supported by the kernel out of the box:

Code:

Linux brokenbox 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 i686 GNU/Linux

It uses/used the atl1c driver. It was working on the same install just about a day ago!

View 9 Replies View Related

CentOS 5 Hardware :: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller ?

Mar 31, 2011

I am a newbie who's having trouble installing drivers for Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller.

I already have the drivers from my motherboard vendor, its just that i cant get them to run on my machine. I am running CentOS 5.5.....On the Sytem>Administration>Hardware (Device Manager) I can see the device listed. I am uploading the files for anyone who needs them. I know i need to run an rpmbuild, but i get errors when i try it..... also, i've tried to run atl1.rpm from ElRepo with no luck, i get an error saying Cannot find a valid baseurl for repo:

View 5 Replies View Related

CentOS 5 Networking :: Ethernet Driver - Atheros (on Board) Is Not Shown In Network Ifconfig

Jul 7, 2011

I have installed CentOS. I have two ethernet card (one onboard and one PCI). I am able to set ip for realtek ethernet card and my atheros(on board) is not shown in network ifconfig shows only one ethernet card (PCI) hen i gave the command lspci i got the following output

01:00.0 Ethernet controller: Atheros Communications AR8132 Fast Ethernet (rev c0)
03:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)

View 4 Replies View Related

CentOS 5 Networking :: Find A Driver For Wireless Card (Atheros AR928X)?

Jan 5, 2010

I'm trying to find a driver for my wireless card (Atheros AR928X) and I think it's ath9k what I need. As far as I know there isn't a linux driver for it, so I installed ndiswrapper to use a windows driver instead. The problem is that when I type modprobe ndiswrapper I get "bash: modprobe: command not found" (even as root). I know I'm missing something about modprobe, but I can't find any help on google. Anyway, I installed ndisgtk next, because I thought it would be easier, but when I go to System> Administration> Windows Wireless Drivers I get a message "Unknown error".Do you have any ideas on how I'll make ndiswrapper work?

View 3 Replies View Related

Ubuntu Networking :: Start The Dc Driver For Ethernet Controller?

Mar 23, 2010

I just installed the latest version of Mint xfce on my old inspiron 8000 with a microsoft MN-120 pci ethernet card, and though the card shows up as hardware, it is not recognized as a network interface. I believe there is no driver loaded for it.

It's an old card, but it seems the kernel still supports it. There are instructions for activating the dc driver that appears to be the proper driver for this chip set, but those instructions originated from freebsd and I'm not sure they translate well. See here:[URL]

I did find a kernel config file, but I was afraid to add the suggested lines to it because there were no other lines specifying "devices". They all started with "config".

View 2 Replies View Related

Networking :: No Eth0, Driver For Ethernet Controller Issue ?

Jul 3, 2011

i am having issues with networking on a certain liveCD.all ubuntu installs ive done on this machine im sure work fine, but i may have had issues with older backtrack versions.My issue is no networking on boot of SamuraiWTF, for those unfamiliar its based on ubuntu 9.04 There is nothing except lo loopback when i run 'ifconfig', and there is nothing in /etc/network/interfaces for eth0 either.

lspci shows a Broadcom driver, but the same command shows the model number etc on a newer ubuntu install on the same machine. This is:

Broadcom NetLink BCM57780

I have the latest .tar.gz of the tg3 drivers suggested by Broadcom, but im lost on how to install them.

-------------------------------------------------------
EDIT: it seems to be an issue with earlier kernels, i installed 2.6.35 and it worked but the kernel isnt mean for 9.04 i dont think, and now theres issues with the nvidia card

View 4 Replies View Related

CentOS 5 Networking :: Atheros L2 Fast Ethernet Card Isn't Centos 5

May 4, 2009

I am using asus p5ld2-x/1333 motherboard,I installed the centos ,Centos saw other drivers but didn't see ethernet card.I am not connection the internet.

View 2 Replies View Related

Ubuntu Networking :: Broadcom B44 Ethernet Controller Not Working After Patching Wlan Driver

May 28, 2011

I patched my wireless driver in order to support packet injection. Using this tutorial:

- Install the Firmware:

Code:

- Create new directory:

Code:

- Now disconnect Internet and unload all your driver (use rmmod command)

- Move/copy the Compat-Wireless patched in /usr/src/drivers directory and unpack the drivers:

Code:

Blacklist the wl driver: (STA driver)

Code:

Currently I'm running Ubuntu 10.10, Kernel 2.5.35-29-generic. I have a Broadcom 4318 for my WLAN and a Broadcom 4401-B0 for my ethernet. I followed the tutorial and I managed to get packet injection working on my WLAN; however, my ethernet connection isn't working. I tried sudo modeprobe b44, but I get the following message:

FATAL: Error inserting b44 (/lib/modules/2.6.35-29-generic/kernel/drivers/net/b44.ko): Invalid argument

View 9 Replies View Related

CentOS 5 Hardware :: Can't Find ATHEROS L1E Lan Driver ASUS P5KPL-CM Motherboard

Apr 8, 2010

I am trying to clone a working Centos 5.4 system onto a new box with a ASUS P5KPL-CM motherboard. I have done so by plugging in a Realtec lan card - but can't get the motherboard lan working. Googling tells me the motherboard has a Atheros L1E lan chip - but I have installed several kmod drivers from ELREPO - but still can't get the on-board lan working. So far I have installed:

kmod-atl1e
kmod-atl1

I have just installed these with yum - but no new hardware appears in the network gui dialogue. Am I missing some step here - or is there another driver I should be looking for.

View 5 Replies View Related

Fedora Networking :: Unable To Use Atheros Ar9285 Driver

Nov 12, 2010

I've been trying to install the network adapter for the ar9285 driver using compat-wireless-2.6.32.16.tar.bz2 found at [URL] The commands I run after extracting are:

cd ~/Desktop
cd compat-wireless*
scripts/driver-select ath9k

Then after typing scripts/driver-select ath9k. This happens:

Processing new driver-select request...
Backing up makefile: Makefile.bk
Backing up makefile: drivers/net/wireless/Makefile.bk
scripts/driver-select: line 73: perl: command not found

[code]...

View 1 Replies View Related

CentOS 5 Networking :: Can't Install Driver For Atheros AR5006X Wireless

Feb 9, 2011

I have CentOS 5.5 and I can't install the driver for the Atheros AR5006X Wireless.The current state of my CentOS is:

*) If I run lspci, I get 03:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01) (wrong model)
*) If I go to System->Administration->Network, I see the wlan0 device with xlan0 name, but if I tried to active I get: (and the same when the system is rebooting)

Error for wireless request "Set Mode" (8B06):SET failed on device wlan0 ; Invalid argument. Determining IP information for wlan0...

View 7 Replies View Related

Red Hat / Fedora :: Compiling Error In Atheros AR8152 Fast Ethernet Driver

Sep 22, 2010

I tried to compile Atheros AR8152 PCI-E Fast Ethernet Controller driver for fedora 13 64 bit kernel version is 2.6.34.7-56.fc13.x86_64. I have installed kernel source , kernel header and necessary all things to compile it. (linux-firmware-20100806-4.fc13.noarch also installed). I tried AR81Family-linux-v1.0.1.13 source from Atheros web site.

But when I try to make it it give following error.
Code: Makefile:173: *** *** Aborting the build. ***
This driver is not supported on kernel versions older than 2.4.0. Stop. It is not compiling issue because I compiled and installed broadcom wireless driver.
Makefile is attached here (renamed as Makefile.txt -> Makefile)

View 5 Replies View Related

CentOS 5 Hardware :: Where To Get Atheros AR8121/8113/8114 Ethernet Drivers For CentOS 5.3?

Dec 21, 2009

I have installed CentOS 5.3 on my PC which has an Atheros AR8121/8113/8114 Gigabit Ethernet. Unfortunately 5.3 has no drivers for this LAN Card. I searched the Google for drivers but was unable to find any. Does the 5.4 has them? If yes then how can i upgrade it to 5.4 without Network connectivity?

View 11 Replies View Related

CentOS 5 Hardware :: Atheros AR8152 V2 Fast Ethernet Does Not Work On Centos 5?

Jun 25, 2011

i have a centos 5 and i cant access to the LAN or Internet because , i cant create a network connection , i try to say My Ethernet dont appears,and i cant add any connections.i id thisTerminal:Quote:sudo iwconfig

View 4 Replies View Related

CentOS 5 Hardware :: JMicron JMC250 Ethernet Controller Not Working On Centos 5.5?

Oct 29, 2010

I've installed a new fresh Centos 5.5 ..and after a lot of work..something starts to work (X now works with the new ATI HD5145 using ATI drivers) but i've a serious problemThe ethernet controller JMC250 JMicron PCI EXPR. doesent work at all so my notebook is out of the world !!!Here is some infos:rpm -q centos-release

centos-release-5-5.el5.centos
rpm -qa kernel* | sort
kernel-devel-2.6.18-194.el5

[code]....

View 6 Replies View Related

Ubuntu Networking :: Atheros Gigabit Controller Stuck At 100 Mbps?

Apr 18, 2011

I'm using Ubuntu Server 10.10 64 bit and am trying to get my Atheros AR81xx gigabit ethernet controller to use 1 gbps.I have 2 ethernet controllers, one's a linksys 100 mbps (which is connected to the router which goes to the internet) and the other is the Atheros gigabit controller that is connected to a Windows desktop that has an NVIDIA gigabit ethernet controller (for faster file transfers with a gigabit connection) I've ruled out that the problem is with the desktop as I plugged the windows PC into my macbook (which has a gigabit controller), and both the macbook and desktop report a gigabit connection.

I plug the windows desktop into the server and I only get 100 mbps. I am using a Cat 6 patch cable. I've tried several methods with ethtool to force it into 1 gbps mode, but none work. I've tried using a different cable. no change. I've tried making windows force a 1 gbps connection, didn't have the option to in the driver configuration. Only 10/100 configs. the commands I've tried in ethtool

Code:

ethtool -s eth0 speed 1000

Reports no error, but no effect. I've tried forcing off auto negotiation (I had a hunch it was causing the problem)

Code:

ethtool -s eth0 speed 1000 duplex full autoneg off

I get this

Code:

Cannot set new settings: Invalid argument
not setting speed
not setting duplex
not setting autoneg

I tried each setting individually, and autoneg won't set, the others will (but not do anything)

View 4 Replies View Related

CentOS 5 Hardware :: Intel 82598EB 10G Ethernet Controller

Mar 12, 2010

Does centos 5.4 support this?

product code: E10G41AT2

[url]

View 1 Replies View Related

CentOS 5 Hardware :: Broadcom Ethernet Controller Not Recognized?

Sep 7, 2010

Running CentOS 5

System see the device with an lspci, yet will not load

Vendor:Device ID is 14e4:1691

Broadcom BCM57788 on board ethernet controller

Cannot find driver or anyone that seems to support it. Am I missing something?

This is in a Dell computer.

View 10 Replies View Related

CentOS 5 Hardware :: Driver For Ich8 Serial Ata Storage Controller 2820 Driver

Feb 17, 2010

I am attempting to load CentOS 5 on an Acer 6900 desktop and I'm not even getting out of the starting gate. I am familiar with using linux but not the install procedure which is why I am beginning to dive into this. However, when I bring the system up off the Linux boot disk and go to install it's not even giving me the option of the controller so I can begin installing the os from the dvd-rom. This is what acer lists as the controller for the 6900: ich8 serial ata storage controller 2820 linux driver. I cannot find this driver for linux anywhere.

View 10 Replies View Related

CentOS 5 Networking :: Ethernet Can Not Work After Inserting RTL8168B Driver?

May 22, 2010

I changed a mainboard so the network card is RTL8111/8168B Gigabit now. By "ifconfig -a", there is only io, no eth0.

I got a driver r8168.ko from: [URL]

After I insert the r8168.ko, there is eth0. Run "/etc/init.d/network restart", it reports "Determing IP information for eth0... failed; no link present, Check Cable", and I noticed the lights of network card and runter are all off. I can use "ifconfig eth0" now but it cannot connect to other machine.

It's Gigabit card and my runter is 10/100M. I tried "#insmod r8168 speed=100 duplex=1 autoneg=1" and "#insmod r8168 speed=100 duplex=0 autoneg=1", it can not get IP by DHCP either. I also build the .ko from Realteck source code, the behavior is the same.

if I need to do other configurations?

My CentOS is CentOS5, 2.6.18-8.el5 #1 SMP.

== BEGIN uname -rmi ==
2.6.18-8.el5 i686 i386
== END uname -rmi ==
== BEGIN rpm -q centos-release ==

[Code].....

View 5 Replies View Related

General :: Where To Find Atheros Ar8131 Driver For Suse 9.1

Mar 23, 2010

where to find atheros ar8131 driver for suse linux 9.1

View 14 Replies View Related

Ubuntu Networking :: Atheros AR8152 Ethernet In 11.04?

May 2, 2011

I realise there are a few threads of issues with the AR8152 chipset and Ubuntu 11.04, however, my issue does not appear to be the same as others, nor does there appear to be a consistent solution yet. My ethernet worked fine in Ubuntu 10.10, but after upgrading to 11.04, I experience the errors I am about to explain. I also experience these when booting off a Ubuntu 11.04 Live CD, so it's not just the upgrade the caused the issues. The issue is, if I turn on my system without the ethernet cable plugged in, and then plug the ethernet cable in once I've logged into Ubuntu, the system will not detect it, at all. No amount of network manager of dhclient eth0 will get it to function, however, the device itself still appears in the system. If I turn the system on with the ethernet plugged in, however, it will get an IP address and function correctly. I tried to download the drivers from Atheros and build them, but for whatever reason it complained about me not having autoconf.h or automake.h (can't remember which), despite having build-essentials and linux-headers-generic installed.

View 1 Replies View Related

CentOS 5 :: Unable To Find The Folder To Install The Support Driver?

Jul 25, 2009

When i put the command: /etc/init.d/vboxdrv setup for install it it say this:

Stopping VirtualBox kernel module [ OK ]
Recompiling VirtualBox kernel module [FAILED]
(Look at /var/log/vbox-install.log to find out what went wrong)
[root@server ~]#
and
the log:
Makefile:185: *** Unable to find the folder to install the support driver to. Stop.

View 4 Replies View Related

Ubuntu Networking :: Atheros AR8151 Ethernet Not Working?

May 7, 2010

Installed 10.04 on an Acer TimelineX 3820TG but can't get the ethernet to work.

Code:
$ sudo lshw -C network
*-network UNCLAIMED
description: Ethernet controller
product: AR8151 v1.0 Gigabit Ethernet

[Code]....

The driver from [URL] won't work either (error in script on make).

View 9 Replies View Related

Networking :: Atheros 8152 - Ethernet Not Working On Slackware 13.1

Mar 17, 2011

I just installed Slackware 13.1 on my new Toshiba satellite c650 and my ethernet device isn't working. I have tried to compile the driver provided by atheros but being a newbie i failed. I understand that there's a driver included in the kernel, so why isn't it loading? The info center list my PCI LAN card as "attansic corp device 2060".

View 10 Replies View Related

Networking :: Ethernet Controller Missing After Reboot?

Jun 12, 2011

I use Linux Mint Debian XFCE and there was a large update (lots of programs) I have done prior to rebooting. After reboot, my computer can now no longer find the ethernet controller anymore in lspci, so my wired connection no longer works.

Is this a hardware issue? The green lights are all blinking fine though.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved