CentOS 5 :: Setup A Central Backup Server With BackupPC Installed On 5.6 X86_64
Jul 29, 2011
i`m trying to set up a Central Backup Server with BackupPC installed on CentOS 5.6 x86_64, My CentOS has Samba3x / Winbind integrated with Active Directory i found this nice Wiki http://wiki.centos.org/HowTos/BackupPC , to get my BackupPC installed. after installing RPMForge's repo and settin` up the priorities to the repos, http://wiki.centos.org/PackageManagement/Yum/Priorities i get the following error regarding Samba3x Conflicts , i dont wanna miss up my Samba Configuration to install BackupPC, even --skip-broken option does not work for me
I am having problems gaining access to the BackupPC admin web page. The error:
Quote:
[Tue Feb 22 16:43:59 2011] [error] [client 192.168.0.2] (13)Permission denied: Could not open password file: /etc/BackupPC/htpasswd [Tue Feb 22 16:43:59 2011] [error] [client 82.30.227.113] access to /backuppc failed, reason: verification of user id 'myhtaccessuser' not configured
Why is this occuring, is there anyway of getting around this? I just cant remember originally on my old system how I set this up.
So im setting up backuppc but do not want Apache to run as the backuppc user. To get round this I need to setup suEXEC so that CGI scripts are ran as the backuppc user. This seems fine and I do have the module loaded,
1. I have configured my config files as said here 2. I have read that DOC_ROOT for suEXEC is set to /var/www I need to change this to /home/www - as a quick fix i have a symbolic link from /var/www to /home/www.
3. To confirm what DOC_ROOT is and check where the log file will be as suggested on many sites I run "/usr/sbin/suexec -V" but I get nothing back, it does not list any config.
4. Group and Owner for "/usr/share/BackupPC" is backuppc
I installed VMware server on my CentOS 5 machine. I had problems getting that working. Then I installed VMware Workstation. That worked fine. Then I tried using VMware server, but apparently VMware Workstation deleted some of VMware Servers files. So, I uninstalled VMware Workstation. Then I tried to reinstall VMware Server, but rpm complains package VMware-server-2.0.2-203138.x86_64 is already installed
on my server I have atMail and a intranet site being hosted using mySQL for the database locally, and obviously backing it up would be a good thing. I got the backup package from the list if you use the add/remove software called dump-0.4.etc.. can't seem to find much on how to use it, set it up, nothing. Granted I could be looking for the wrong thing which I'm sure is the case. As of now it's looking like a USB drive is going to be my only option, that will change in the future as this "project" goes further (we are a windows shop trying out Linux, and the next step is going to be adding another server that's a file server at that point we'll probably go to NAS for the backup and then transer that to a USB for offsite/secondary backup).
In my network Nagios server running on Ubuntu server and working fine. I am able to monitor servers in local network through plugin and SNMP. Now I want to monitor some servers which are located remote location(network) and they haven't real IP(all are behind route/firewall). I can allocate real IP to nagios server if require. How can I monitor those servers?
Maybe this should be asked on the hplip website somewhere but I will ask it here. I am running CentOS 5.3 x86_64. The latest rpm version of hplip which I can find, and which is installed, is 1.67 but I need at least version 2.84 of hplip for my printer, an OfficeJet j6480.
Has anyone installed hplip version 2.84 or later for an x86_64 system ? Do either the hplip-2.8.4.run or hplip-2.8.4.tar.gz installation methods install hplip 2.84 for an x86_64 system, as opposed to just an x86 system ? Has anyone produced on he web somewhere a 2.84 or later hplip rpm for x86_64 that I can use rather try to figure out how to do it myself ?
When I installed CentOS on a 64 bit machine, I selected the 64 bit option. However, for some reason it installed many i386 packages - these were exact duplicates of installed x86_64 packages.Is this typical? How do I prevent this on future installs? If I left them installed, could this have caused a problem in the future? Due to my fastidious nature, I used yum extender to uncheck every duplicate i386 package and uninstalled them. This took some time. I am still not proficient with yum directly so I am wondering if there is a command to uninstall all i386 packages quickly.
While i am using yum update am getting an error: Error: Missing Dependency: libgpod.so.0()(64bit) is needed by package rhythmbox-0.11.6-4.el5.x86_64 (installed).
This is my first post, I hope I'm the the right place. I installed mysql mysql-server php-mysql perl-DBD-mysql libdbi-dbd-mysql via "yum install -y" on a server running CentOS 5.3 X86_64 The install completes successful with no errors, but once I start mysqld via "chkconfig --level 35 mysqld on" ; "service mysqld start" There are no errors in /var/log/mysqld.log netstat shows mysqld listening on 3306 and localhost is in /etc/hosts
I have an i5 Thinkpad running Windows 7 64-bit. VT is enabled in the BIOS. I have installed vmware server v 2.0.2 but am unable to install Centos 5.5 x86_64 as a guest OS. The steps that I followed are as follows:1. Created a new VM, specifying RHEL 5 64-bit as the intended guest OS (per vmware documentation - Centos is not available as a selection2. Downloaded all 8 iso files for Centos v5.5 64-bit3. Modified the CD/DVD drive to 'connect at power' and use an iso with the path pointing to the x86_64 iso 1 of 8When I power up the VM, the console window displays 'ISOLINUX 3.11 2005-09-02 Copyright (C) 1994-2005 H. Peter Anvin' and nothing else. The installation splash screen never appears. As a test, I downloaded the first of 7 iso files for the 32-bit version of Centos 5.5 and pointed the CD/DVD drive to that iso. In that case, the installation starts as expected. I would really like to get the 64-bit version installed and running.
I am replacing a home network - Windows Server 2003 and 5 PCs (XP Pro) with UBUNTU 10.4 LTS Server and client versions. I am keeping a couple of the PCs with dual boot until I can migrate everything over (Having some issues with iTunes, Family Tree Maker, Media serving, DVD decrypt and a couple of others, but that is for another post). It was great fun getting the server up and running using only shell commands. Took me ages just to get a folder shared! Migrating the data over from NTFS to ext3 was also fun given the limited space on the partitions.
I really only want to use the server for communal network type things ... central user account maintenance, shared folders for music, video etc and data backup. I don't need it to be performing server functions on the Internet e.g. web server etc although that may come later. How I set up central user management? All the PCs are currently setup with local user ids, and it is a bit of a pain to go round each PC every time I change something.
The server is not always up, so I need to be able to log into the local PC without it being active. I was using Active Directory on Server 2003, but I don't need anything that complex really ... just 3 or 4 users to manage. I have been looking at the setup tutorial at [URL] but am not sure how relevant a lot of it is. I have SSH setup so I can login remotely, NFS is working to share the folders, but that is about all I have done so far.
looking for a bit of assistance from those that know. i would like to setup an offsite backup server preferably using my current ubuntu 10.10 server.i would like something that has a client that can be used on windows PC's and that is managed so i can controll bandwidth and storage space.it will only be used for storing important files and not full backups of machines.i thought about using something like comodo backup for the clients and just setting up and FTP server but just wonderd if people know of a better solution.
I have 2 servers. One is an operational CentOS + cPanel server and the other is a blank CentOS server. I want to use cPanel's backup suite to backup our customers accounts but I want to do it so the blank server is mounted to the cPanel server, rather than an FTP backup. If that makes sense. I believe from previous experience that NFS is the way to go but I'm not sure.
I have checked and double checked the .htaccess and httpd.conf to make sure everything is correct and I'm sure it is. I have AllowOverride set to All in the httpd.conf, Apache sees and is reading the .htaccess because I get a 500 Error when I put garbage text in the file. I'm lost now.
I am doing a LVM replicate to another server. Example: server1.foo.com has / , /boot , swap and few LVM partitions. All are in /dev/sda disk of size 80GB. /dev/sda5 is a LVM partition which has only one vg00 and it has 2 LV's (/var and /usr) and a SAN storage connected to this server which has around 500GB of single partition(a LV partition) called /data and its under vg00 .
Now I have build another server called "server2.foo.com" with same RedHat OS version - RHEL 4 and want to import the same LVM setup at destination. Down time or unmounting the filesystem is not a problem (but am trying to reduce the down time as much as possible). Is there any way that I can take a proper snapshot of whole LVM disk and restore with same setup at destination without losing the data and the lvm file system layout?
I have windows 2003 with high memory and HDD in local network which i want to make it as backup server. there are few linux and windows clients which are all running in redhat,centos and windows 2003. As i want to setup netware backup, is there any best open source backup s/w available so that the backup would run periodically. i need to isntall backup server in my windows 2003 and backup client in other linux and windows 2003. any free backup software.? i went through zmanda but that is not freely available.
I am trying to get going BackupPC on a fedora 12 64 bit machine as the server. I have got Apache running asn can see the test page. I can log on to the BackupPC web page at http://127.0.0.1/BackupPC. but that is about as far as it goes. The web page does not have anything on it that I can configure, or get any useful information on. There are a number of menu item missing Admin options, LOG file. Old Logs, Email summary, Config file, Host file, Current queues are all missing.
This according to the articel I have showing a BackupPC web page sceen. I have edited the /etc/hosts file to include the localhost and the backupserver IP address. I have also added these to the /etc/BackupPc/hosts file. The web page that is displayed not only has the missing menu items but the colour of th highlighted menu item is blue not green as in the typical pictures I have.
I have tried to use the article Back Up linux and Windows systems with backupPC from howtoforge as the basis. As I indicated I can get teh web page up but can not do anything. Clearly I have missed something.
Can anyone assist me to get this going. Is there a definative article somewhere that sets up BackupPC on Fedora 12?
here is the thing. I've deployed BackupPC in a server at work, and everything is working fine. Now, what I need to do this thing. I have a remote server with a website and a postgres db running. I've been able to set up everything to be backed up using rsync. But I would like to make the same process to restore the backup immediately in a local server trough rsync, that has to be ready just in case of failure of the remote server. What I've tried to do is to run the DumpPostUserCmd, so whenever a dump is performed in the remote server, I can have my local server updated. What I've find out is that when you perform a restore through the web interface, the command that performs it is (using ps ax in the backuppc server):
So, what I could find out is: /usr/bin/rsync is the command that the process runs in the server where I want to put the restore. Then the options, and finally, source and destination of the restoration. But, as you can see, the source is '.' but I cannot guess where to point that!
I have a simple issue that I think can be solved with several different methods. I basically want to create a personal server solution that allows me to do two things:
1.) I want to be able to remotely backup data to my server.
2.) I want to be able to pass traffic through it and use it as a proxy.
I am off to college next year and I want to leave a computer/server back home to do the two things stated above. I was thinking of using an Asus Eee Box PC like this:url
I want a low power reliable machine that will only be used as a remote solution. I won't be hooking up a monitor to it (that is, after I set it up).
It will be on 24/7 for easy access.
I will be accessing this server from a Windows 7 based machine.
I do not mind at all installing Linux on my server, but I am not an experienced coder so I will need software with a GUI that can help me set this all up.
I have been searching for a software package that will install on CentOS5.4 x86_64 or RHEL5.4 x86_64 that I can allow users to access via the Internet for online web storage, pictures and they can manage their space (quota would be enforced). I am not having much luck finding any software?
We are trying to set up a NIS server on a CentOS system. We need to have a NIS server which can provide NIS authentication to a couple of clients. We are practically new to all this stuff.
Just googled to find some ideas about installing ypserv and ypbind and portmapper. We did all that and also started them successfully. But now the clients are not able to join to the NIS domain . The error log states "YP_DOMAIN NOT BOUND".
I guess we have not entered the /etc/yp.conf, /etc/hosts files properly. Please let us know the detailed steps to setup a NIS server .
Also, please let us know what entries should go into the different /etc/<file_names>? What is meant by HOSTNAME in the /etc/hosts file?
Is there any other files which need to be changed? Are we missing any steps?
Also to add-on, while executing the ypinit command we faced the following error:
At this point, we have to construct a list of the hosts which will run NIS servers. localhost.localdomain is in the list of NIS server hosts. Please cont inue to add the names for the other hosts, one per line. When you are done with the list, type a <control D>. next host to add: localhost.localdomain next host to add:
We have 300+ server and 2000 websites . all server os is centos-5.x . I am looking for central administration tools webbased so i can manage all server from the central server .currently we have use central ftp management(pureftp), central htaccess management (mod_auth_mysql) ,monitoring(nagios)
We need user management (same uid gid all server) also easily find which virtual host configure on which server. how many ips free on which server . central server backup and restoration ,central db management central firewall management,central nfs management and more .
I now have BackupPC up and running on ubuntu 9.10.I have a couple more issues. These relate to the fact that I am trying to use backuppc to backup files, but also to provide a central up to date store of network accessible files, so, for example, media files can be viewed over the network, rather than downloaded through the web interface. Thus I have the following problems:
1. Access the files through the network.I want to have /var/lib/backuppc as a browsable folder through the network. I have managed to change permissions on the folders so they are browseable, but i need to set the file permissions so i can open the files. How do I do this, and set it so that all future backup files are given accessible permissions?
2. A single store of files.I want one folder with all the incremental backups being copied into it, so to see the most up to date version of a file, I just browse to it in nautilus, or through shared folders from another pc on the network.At the moment, I have a 0 and a 1 folder, and I am sure I will end up with loads more. I just want a single folder, no matter how many times the backup is made.
3. Change the Naming Convention.Also is there a way to change the naming convention so the folders are given the normal names (so Documents rather than fDocuments)?
I'm looking for a simple solution to backup my CentOS Server (5.x) on a daily base to a mounted disk. I found the glastree tool but I have no clue if it will work on CentOS.All recommendations, tipps, hints and maybe scripts are welcome. Unfortunatelly I'm an Linux newbie and starting with Linux CentOS a couple of weeks ago
Basically I'm working as part time administrator in a company, and still am at college. To keep the story short, the company I work with used to have a linux gateway, namely Untangle. We tried to upgrade to E-Box, which is supposed to have more options than Untangle, but it doesn't seem to work as it should. What I'm trying to ask here is this. I need a gateway system that handles QoS, Content filtering, Mail Filtering, DNS, Wan failover / load balancing, LOGS (important), Firewall and maybe the handling of separate users or groups. The ideal solution would be one that like the E-box, has a central control system, without the need to adjust code in CLI for configuration. I have some experience on CentOS and Fedora, so I am able to do some configuration, like installing Samba, DHCP and VNC.
