CentOS 5 Networking :: Find Out Which Package (rpm) Contains The Ipg (network Driver) Module?
Mar 22, 2011How do I find out which package (rpm) contains the ipg (network driver) module?
View 1 Replies
ADVERTISEMENT
CentOS 5 Networking :: Macbook Pro 5,5 - Late 2008 - Wireless - Download The Broadcom Driver And Create A Driver Module
Feb 20, 2010I have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.
Using these instructions....
[url]
When I make the WLAN driver, I get this:
CentOS 5 Networking :: Modprobe Doesn't Seem To Be Able To Find Any Rt25x00 Module
Apr 9, 2009Since my Asus WL-3300 seems to be having trouble, I bought a USB adapter -- a Linksys WUSB54G ver 4. Version 4 was apparently important because it came with a Ralink 2570 chip -- and that's supposed to work with Linux (which is why I chose it).I think it will work because, without loading any drivers, Net Manager can see the local routers (about seven of them). But when I choose mine, though it asks for a WEP key, it never connects. I'm not sure now what driver is loading that *almost* works with it. But I think I may still need to load the driver from: URl...But when you read the page it says that the driver has entered the "Mainline Kernel" -- and I'm wondering if that is why the adaptor almost works.So the questions:
1) Without a driver, should this Ralink 2570 be working at all?
2) How do I find what driver *is* loading?
3) Modprobe doesn't seem to be able to find any rt25x00 module, is this right -- or is there some other name I should be looking for?
iwlink scan, ifconfig, etc., all see the adapter as wlan0.lsusb shows the adapter.I'm going to keep searching, but wrote this in case there is something really simple that I'm overlooking.
Networking :: Rtl8187 Driver Module Load Error (Invalid Module Format)?
Jun 1, 2009When I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
General :: Find The Driver Module Name Using MAJOR NUMBER?
Aug 16, 2010how to find the driver module name using MAJOR NUMBER. In general major number list is available in Documentation/devices.txt but if i want to find out the driver module name specific for a given MAJOR NUMBER, what can be done?
View 2 Replies View RelatedCentOS 5 Networking :: Find A Driver For Wireless Card (Atheros AR928X)?
Jan 5, 2010I'm trying to find a driver for my wireless card (Atheros AR928X) and I think it's ath9k what I need. As far as I know there isn't a linux driver for it, so I installed ndiswrapper to use a windows driver instead. The problem is that when I type modprobe ndiswrapper I get "bash: modprobe: command not found" (even as root). I know I'm missing something about modprobe, but I can't find any help on google. Anyway, I installed ndisgtk next, because I thought it would be easier, but when I go to System> Administration> Windows Wireless Drivers I get a message "Unknown error".Do you have any ideas on how I'll make ndiswrapper work?
View 3 Replies View RelatedNetworking :: Unable To Find Atheros AR8132 PCI-E Ethernet Controller Driver For CentOS / Fix It?
Jun 26, 2011I am unable to find Atheros AR8132 PCI-E Ethernet Controller driver for CentOS which is installed on my netbook.
I contacted DELL to provide me the driver and they said that they do not support Linux on netbook and I have to arrange it myself.
I told them that I don't need help in installing I just need the driver file to which they said that they don't have driver for Linux.
NIC is getting detected and works fine on the same netbook (Am dual booting Windows7/CentOS) with Windows7
When I type: ls -l /dev/ it does not show up eth0. Same result with ifconfig. When I type lspci | grep net it does show up something like Atheros Communications AR8132 L1 PCI Gigabit .
Programming :: Detect Which Module/driver A Network Interface Use?
Dec 28, 2010In C++ or C, is there anyway to detect the name of the module or driver currently used by a network interface card (either wired or wireless, INCLUDING USB DEVICES)?My application must have this feature. I just want to detect whether the module / driver is ndiswrapper or not.
View 4 Replies View RelatedCentOS 5 Networking :: Reinstall Network Driver After Changing Motherboard?
Jan 17, 2010I have a newly installed CentOS 5.4 on Gigabyte G31M-ES2C, I had to change the motherboard since it has some problems. Unfortunately the new motherboard is a rev 2.x board, which has a different onboard NIC (old one is RTL 8102E, new one is AR8132), so now my ethernet connection doesn't work anymore (no eth0 device), I assume I need to install a new driver for the AR8132? If so, what's the steps to do so?lspci shows Ethernet controller as: Attansic Technology Corp. Atheros AR8132 / L1c Gigabit Ethernet Adapter (rev c0)
View 3 Replies View RelatedCentOS 5 Hardware :: Uninstall Nvidida Graphics Driver Module?
May 20, 2010I'm trying to compile a correct driver module for my graphics adapter "Nvidia Riva TNT2 M64". I visited the website "http://www.nvidia.com/object/linux_display_archive.html" and I downloaded the file "NVIDIA-Linux-x86-71.86.13-pkg1.run".to start installation I used the following commands:/sbin/init 3 --> to close the X rversh ~/NVIDIA-Linux-x86-71.86.13-pkg1.run
View 10 Replies View RelatedCentOS 5 Networking :: Dell Inspiron 1525 - Network Driver Doesn't Recognized
Feb 28, 2009i just installed centos on my dell inspiron 1525 but the network driver doesn't recognized
View 8 Replies View RelatedCentOS 5 Networking :: Ethernet Driver - Atheros (on Board) Is Not Shown In Network Ifconfig
Jul 7, 2011I have installed CentOS. I have two ethernet card (one onboard and one PCI). I am able to set ip for realtek ethernet card and my atheros(on board) is not shown in network ifconfig shows only one ethernet card (PCI) hen i gave the command lspci i got the following output
01:00.0 Ethernet controller: Atheros Communications AR8132 Fast Ethernet (rev c0)
03:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
OpenSUSE Network :: Can't Find Network Hard Driver On Network?
Oct 31, 2010On Linux Mint (Gnome) i used to go to Network drive. that is on the right hand side of Nautilus there is a short cut for Network. in there i could see my network hard drive and other laptops connected to the network, and i could access my files. but on OpenSuse, when i open the network folder, nothing comes up. may be it needs some sort of configuration.
View 2 Replies View RelatedGeneral :: Adding A New Kernel Module To Wireless Driver Module?
Apr 22, 2010I want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.
View 2 Replies View RelatedUbuntu Networking :: Wireless And Lan Driver Kernel Module?
May 1, 2010what is name of modules in kernel for wireless and lan driver ?
View 1 Replies View RelatedCentOS 5 :: Could Not Find Package Libawl-php?
Feb 17, 2011I been trying to install libawl-php package but doesn�t seem avilable either in rpmforge, and other repos.does anyone know where can i download this pacakge or other repo to add which allows to install
View 2 Replies View RelatedUbuntu Networking :: Download The Proper Driver For Wifi Module?
May 22, 2011where can I download the proper driver for my wifi module : Ralink RT3090 ?
Ubuntu 10.04 propose the rt3090sta which is no good
CentOS 5 :: Install W3c-libwww Package But Can't Seem To Find In Yum
May 4, 2009I'm looking to install the w3c-libwww package, but can't seem to find it in yum. Is there a safe repository somewhere I can enable to grab it, or am I going to have to install if from source? CentOS ver. 5.2/3
View 1 Replies View RelatedCentOS 5 :: Couldn't Find Git Package In Any Of Yum Repositories
Jul 14, 2009I have centos 5.3.I couldn't find git package in any of the yum repositories. Is there a package location, version you would recommend.
View 1 Replies View RelatedCentOS 5 :: Where To Find The Libzip-devel Package
Sep 29, 2009I am trying to install the mysql workbench and it is looking for libzib-devel. I can not seem to find it in any yum repo. Does anyone know where I could find it?
View 2 Replies View RelatedCentOS 5 :: Cannot Seem To Find The Appropriate Package In The Base Repository?
Nov 26, 2009I need to install some software which allows me to read chm files. I cannot seem to find the appropriate package in the base repository. How can I install such a reader?
View 2 Replies View RelatedCentOS 5 :: Get The Source Codes Of The RPM Package Alsa-driver-1.0.20-78.el5.i386.rpm
May 23, 2009I want to get the source codes of the RPM package alsa-driver-1.0.20-78.el5.i386.rpm, but I don't know where I can find it,
View 2 Replies View RelatedCentOS 5 :: Startx Can't Find The Intel Driver
Nov 20, 2009I've got a 64-bit CentOS 5 setup and I'm trying to run startx, but when I do I get:
I tried changing the display driver to i810 in xorg.conf but it can't find that module either.
CentOS 5 :: How To Find The Webcam Driver For IBM T400
May 18, 2010In my CentOS5.4, I can found the v4l2: integrated Camera in the aMSN, and the Camera1 in the Channels But I can not run it How cam make my webcam work?
View 1 Replies View RelatedOpenSUSE Network :: Can't Find A Be2net Driver For The Emulex Nc553i Nic
Oct 20, 2010I can't find a be2net driver for the emulex nc553i nic that is being used on the HP 460c Blade G7. I tried to build one from the src rpm provided on the HP site but it fails looking for a be_xmt function.
View 3 Replies View RelatedHardware :: USB Generic Serial Driver, And FTDI Single Port Driver As A Module, But It Still Isn't Getting Recognized?
Feb 4, 2011My gentoo laptop doesn't have a serial port, so I got a usb-serial (RS-232) adapter from ebay. However when I plug it in, the only thing dmesg mentiones is: Code:usb 5-1: new full speed USB device using uhci_hcd and address 2I've tried to look for a kernel driver in "make menuconfig" by pressing "/" and typing 232. Nothing about RS-232. Device Drivers -> Character drivers -> Serial drivers has 8250 and UART as a module. Device Drivers -> USB support -> USB serial converter support has in-kernel: USB generic serial driver, and FTDI Single port driver as a module, but it still isn't getting recognized.Is there some module i forgot to enable, or do i have to download a separate module from somewhere?
View 5 Replies View RelatedCentOS 5 Server :: X86_64 Xen Xm Create Cannot Find Device Driver?
Apr 27, 2009I am trying to create a xen vm on CentOs 5.3 using the following config file:
name = "vm5"
maxmem = 512
memory = 512
vcpus = 1
[Code]...
I'm assuming that it can't find a driver for a cdrom - but I am not too sure of that.
CentOS 5 :: Unable To Find The Folder To Install The Support Driver?
Jul 25, 2009When i put the command: /etc/init.d/vboxdrv setup for install it it say this:
Stopping VirtualBox kernel module [ OK ]
Recompiling VirtualBox kernel module [FAILED]
(Look at /var/log/vbox-install.log to find out what went wrong)
[root@server ~]#
and
the log:
Makefile:185: *** Unable to find the folder to install the support driver to. Stop.
Networking :: Close A Kernel Module Network Socket?
Feb 10, 2010I opened a socket with sock_create()... bind() listen() accept().
Then, the far end closes the connection.
I want to close the near end, so I can re-open for the next connection.
But there is no close(), and sock_release() crashes the kernel.
CentOS 5 Hardware :: Can't Find ATHEROS L1E Lan Driver ASUS P5KPL-CM Motherboard
Apr 8, 2010I am trying to clone a working Centos 5.4 system onto a new box with a ASUS P5KPL-CM motherboard. I have done so by plugging in a Realtec lan card - but can't get the motherboard lan working. Googling tells me the motherboard has a Atheros L1E lan chip - but I have installed several kmod drivers from ELREPO - but still can't get the on-board lan working. So far I have installed:
kmod-atl1e
kmod-atl1
I have just installed these with yum - but no new hardware appears in the network gui dialogue. Am I missing some step here - or is there another driver I should be looking for.