I have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.
Using these instructions....
[url]
When I make the WLAN driver, I get this:
where can I download the proper driver for my wifi module : Ralink RT3090 ?
Ubuntu 10.04 propose the rt3090sta which is no good
In Ubuntu 11.04 32-bit
Dell Studio 1558
Everytime I want to active it I got the following: installation of this driver failed. have a look at the log file for details: /var/log/jockey.log I don't know if this is related to Software Sources, I only have Canonical Partners and Independent. I installed Ubuntu 11.04 from an ISO file and used the whole disk
i have windows vista with a broadcom 802.11g network adapter.I dont know much about computers but i would like to know how to install it on the ubunto OS so i can use internet ?
View 2 Replies View RelatedInstalled 9.10 side-by-side with Vista, then installed the Broadcom STA wireless driver, rebooted to activate it no luck, no connection, neither wireless nor wired. Did this several times. Getting online in Vista works fine.
Here's the system I'm using:
HP tx2500z laptop
Vista Home Premium SP1
AMD Turion X2 Dual-Core Mobile processor RM
ATI Radeon HD 3200 graphics card
Broadcom 4322AG 802.11a/b/g/draft-n WiFi adapter
Realtek RTL 8186C (P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
I am using Linux Mint 8 Helena x64 Edition on Dell Studio 15 laptop which has Dell 1520 Wireless-N Mini Card. It does work when I boot from Live CD of Helena, connect to a wired network and download & install the proprietary drivers when prompted. But on the installed system, I am unable to activate the Broadcom STA driver. I tried completely removing and then reinstalling bcmwl-kernel-source and dkms packages from package manager.When I go to Administration -> Hardware Drivers and click on Activate for Broadcom driver, at first there used to be a window which said Downloading and it used to go away after few seconds and nothing used to happen. Then I installed few updates. At the time of writing, I have installed all the available updates. Now after clicking on Activate, I get this error :
Code:
Sorry, installation of this driver failed.
Please have a look at the log file for detains: /var/log/jockey.log
[code]....
The Hardware Driversscreen shows that it needs the driver for it and when I click "activate" it tries to download it. This doesn't work because neither my ethernet nor wireless cards work.
View 4 Replies View Relatedsent the following email to Broadcom [URL]. I'll post an update if I receive a response. The current Linux STA 802.11 driver causes my system to crash.I've verified this under Ubuntu 11.04 and Linux Mint 11(an ubuntu derivative). Oddly enough, everything worked find under Ubuntu 10.10. My chipset is the 4321, my CPU is an AMD Phenom II 920, and the motherboard is an ASUS M3A78-EM. I tried the STA driver that ships with Ubuntu as well as compiling the one at [URL], including the patch for kernel versions > 2.6.37.
I am confident that the linux driver is the problem. If I connect my machine to my router using an ethernet cable, everything works fine. Also, the wifi adapter works fine under Windows. The symptoms are that the wifi adapter appears to connect to my network correctly and works fine for short transfers. But when I try a larger transfer, such as a speed test or streaming an mp3, one of three things happens after about 5 to 10 seconds:
1) The screen remains in graphics mode but locks up, including the mouse pointer. No keyboard input has any effect.
2) The screen goes into text mode and repeats the following over and over: [435.610002] ehci_hcd 0000:00:13.2CI-DMA:Out of IOMMU space for 18 bytes.
3) The screen goes into text mode and prints what appear to be CPU register contents. I took a picture of this with my phone if it will help, but obviously the text is kind of hard to make out.
I have a Dell Inspiron E1505, which has the Dell Wireless 1505 (Broadcom) card. To run the card, I installed the Broadcom STA wireless driver, which seems to activate the wireless card OK. The problem is that once I installed that driver my onboard Ethernet card was deactivated (and yes, it is enabled in BIOS). I had to remove the wireless driver to get the Ethernet back. Does anyone have ideas? I haven't found this problem listed elsewhere. I am running Ubuntu 9.04 with no other problems.
View 5 Replies View RelatedI have Ubuntu 10.04 installed and can browse the internet via cable, but wireless isnt working. My wireless driver is "Broadcom 802.11b/g WLAN".
In the windows device manager, I found the corresponding inf file to be oem20.inf which I tried to install it through "Setup Windows Driver" but it gave an error saying invalid driver. I also tried installing the Broadcom STA driver, but that didnot help.
I am dual booting with Windows 7, and i installed ubuntu through the windows wubi installer. My laptop is HP Pavilion dv4. I have installed the regular Ubuntu desktop and have made all upgrades. The results from lspci command i have added below.
gowda@ubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
[Code].....
Update 29/04/2011 The new broadcom driver is included in the 2.6.38 kernel that comes with Ubuntu 11.04 Natty Narwhal I suggest everyone to just upgrade to the new version. Update 07/01/11 user some-one the problem with git sources has been solved. At the moment the only commit version that compiles in 10.10 is this one:[URL].. Download the .tar.gz file in your home directory and extract it.
[Code]...
what is name of modules in kernel for wireless and lan driver ?
View 1 Replies View Relatedwhere to download webcam driver for macbook (mac1.1). that can be used on skype? The web cam is built in.
View 7 Replies View RelatedSo I just recently migrated from Vista to Linux, I'm running Ubuntu Studio 10.04 on a HP Pavilion DV6700 with a Broadcom BCM 4312 b/g frequencies wifi adapter. I followed one guide telling me to use the hardware drivers program to activate Broadcom STA wireless driver, but whenever i attempt to do so it says "SystemError: InstallArchives() failed". Can anyone help?? (BTW i am not that adept with the Linux operating as of yet)
View 3 Replies View RelatedHow do I find out which package (rpm) contains the ipg (network driver) module?
View 1 Replies View RelatedI want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.
View 2 Replies View RelatedI have the source code to create a wireless driver. This came with the cd for my adapter but i dont know what to do. btw while i'm in ubuntu i will not have a wired conection to the net seeing as my routers down stairs and i dont have a cable long enough to reach
View 9 Replies View RelatedWhat driver is used for wireless on the Macbook?
View 1 Replies View RelatedMy wireless was working perfectly until I accidentally let the battery run flat with the machine prevented from hibernating. Upon recovery, there was no wireless available. Checking the Hardware Drivers, I can see the Broadcomm driver as "Activated but not currently in use". Following the copious advice elsewhere I have disabled the driver, rebooted the machine, enabled it again - many times. Still the same message. What is stopping me from activating it? Bit of a noob so.
View 1 Replies View RelatedBasically I'm triple booting Mac SL, Ubuntu 10.10, and Windows 7. Theres reasons for it. So I've installed Ubuntu 10.10 latest release everything works except the Wireless Internet! Wired works. The strange thing is there is a driver for my macbook 13inch 4th gen, but when I try an activate it I get some wired errors I've got a screenshot to make it easier to explain.
View 2 Replies View RelatedWhen I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
It has been haunting me for weeks and I haven't been able to fix it so far: When I installed the wireless driver 43XX series on my laptop using a wired internet, I saw the wireless network for a while and after I rebooted my system, My kernel(31) got corrupted and I got error "kernel Panic (and some sync error)",Thus I started using an older kernel(14),Now When I install wireless driver or mobile broadband driver(wvdial), they get vanished after the reboot and my mobile device modem isn't detected.But they are installed in my system(as shown by synaptic package manager but doesn't seemt to work) I desperately want to use mobile broadband.
View 1 Replies View RelatedHow To: Uninstall/Remove Old Wireless Driver to make way for New Driver (RTL8191SE)?
Here's the new driver:
I have been having trouble with my wireless connection intermittently disconnecting and reconnecting repeatedly (sometimes every couple of seconds). I posted a thread about this here on Ubuntu Forums titled: Ubuntu 10.45 & NetworkManager Applet 8.0: Connects & Disconnects Frequently.
I decided to use the STA wireless driver in my Ubuntu 10.04, and my connection actually became faster! Only problem is that it keeps on asking for my wifi password. I didn't have this kind of problem when I was using the b43 wireless driver - it just automatically connects everytime I reboot. how I can make my laptop stop asking for my password everytime I reboot?
View 3 Replies View RelatedI have this PC that came with W7 installed..i am removing it to install Debian Squeeze.I already have burned the 8 DVDs plus the Squeeze Kde CD.AFAIK, BCM 4312 is a proprietary driver, not shipped with Squeeze, but present as source in Unstable..I have already downloaded the files also... will the built *.deb be enough to enable my wireless, or to i still have to do it by hand. remove confilicting modules, build the module, insert it, put it in the corresponding filder. does the deb install do all that, or do i still have to do it, "the good 'ol way"?
View 4 Replies View Related"Broadcom would like to announce the initial release of a fully-open Linux driver for it's latest generation of 11n chipsets. The driver, while still a work in progress, is released as full source and uses the native mac80211 stack. "
View 4 Replies View RelatedI can't get the wireless to work on my laptop its a hp Pavilion dv9700 it has a Broadcom 4321AG 802.11a/b/ g/draft-n Wi-Fi Adapter i cant seem to get it set up.
View 6 Replies View RelatedWhen I installed openSuse 11.4 it doesn't see my wireless card Broadcom. How can I install Broadcom wireless driver ?
View 9 Replies View RelatedIm making plans to buy a 15" Dell Inspiron notebook as it's currently the cheapest 15" notebook which is available in my country, and from what I have read, the Dell WiFi card used in the notebook is Broadcom based, and that Broadcom had recently released hybrid drivers for their cards. Now, after browsing through OpenSUSE's HCL [URL] it seems that a patch to the drivers is needed.how do you patch the driver? Do you just go to <extracted driver directory>/src/wl/sys/wl_iw.c and just throw in this whole chunk of text anyway into the file, or is there something more to it?
Code:
@@ -580,6 +580,7 @@
range->enc_capa |= IW_ENC_CAPA_CIPHER_TKIP;
range->enc_capa |= IW_ENC_CAPA_CIPHER_CCMP;
range->enc_capa |= IW_ENC_CAPA_WPA2;
[code]....
From my lspci output I get Broadcom 4313 and 0x14e4:0x4727It appears that Broadcom supports this card with their Linux STA driverBroadcom.com - 802.11 Linux STA driver guess on that page mine is 4313 2.4 Ghz 0x14e40x4727 Dell 1501even though my notebook is Toshiba.Then they say that the driver is included with Fedora and Ubuntu but nothing about OpenSuse. Then they go on about compiling the driver myself. I'm pretty sure the modules required for compiling drivers are not available on a fresh install and without Internet connection.Is there an easier way to get the driver? Could someone knowledgeable make some .rpm that I can download on another machine and put on a USB stick? Or do I have to wait until Suse developers get to it?
Or could someone make wl.ko file they are talking about on Broadcome Readme? It looks fairly easy to install the driver, if I knew exactly what to disable/blacklist and what security module to load.Another thing I got from dmesg, not sure if it's of any help, was that for this card pci entry that goes like 07:00.0 there's "support D1 D2", then "#PME supported from D0 D3hot D3cold" then the next line "#PME disabled". I've searched this forum but the only time 4313 was mentioned when someone made a mistake with the model number