I have a Realtek ALC262 sound card, using the ALSA-1.0.20 driver， when I load the driver module manually using the command "modprobe snd-hda-intel model=basic", the card can work correctly, but I do not know how to modify the config file "modules.conf" or others to add the model type, so that the driver module can be load automaticly when the computer is startup, anyone knows that?
View 5 Replies
I want to get the source codes of the RPM package alsa-driver-1.0.20-78.el5.i386.rpm, but I don't know where I can find it,
View 2 Replies View RelatedI am using Debian testing. If I install the gnome-desktop-environment then the sound driver defaults to HDA but since I just installed gnome-core (for a more stripped-down version of gnome) the default is the OSS driver. How do I get ALSA to default to the sound driver HDA?
View 1 Replies View RelatedI am using Fedora 10 kernel 2.6.29.1-36.fc10.i686
I have installed the following packages
When I try to configure alsa, I got the following error:
ive finaly set up upmixing on my X-Fi (fedora 12) but now i can hear 6 channel sound in XMMS player, Mplayer but not Rhythmbox. On some forum i found that rhythmbox is using Gstream config, where i can find it in Fedora 12 and how can i make rhythmbox use my alsa 20to51 mod ?
View 3 Replies View RelatedI just got rid of pulseaudio because it breaks in so many different situations. I've switched to Alsa, and all of my sound is working except in mpd. It seems like I have to set audio_output in /etc/mpd.conf. Here is my config file:
audio_output {
type "alsa"
driver "pcm"
name "whatever"
}
When I start mpd, this is what happens:
$ sudo mpd --no-daemon --stdout --verbose
playlist: play 1:"Party Playlist/01 Block Rockin' Beats.mp3"
decoder: audio_format=44100:24:2, seekable=true
alsa: default period_time = buffer_time/4 = 371519/4 = 92879
alsa: buffer_size=16384 period_size=4096
output: opened plugin=alsa name="My MPD Alsa Output" audio_format=44100:24:2
playlist: queue song 2:"Party Playlist/01 Umbrella [Feat. Jay-Z].mp3"
output: closed plugin=alsa name="My MPD Alsa Output"
^Clisten: listen_global_finish called
db_finish took 0.000000 seconds
And I hear the song play for less than a second before the audio_output driver is closed. There really aren't any error messages printed explaining why it's not working. I've also tried "oss", "esd" and "ao" for the audio_output type, and none of them work.
As alsaconf as been removed from alsa-utils in Squeeze, how to configure ALSA ?
Which replacement for alsaconf ?
Debian is squeeze.
Package alsa-utils v1.0.22-1
Currently alsamixer is running fine for setup but i.e. speaker-test produce no sound.
Previous Lenny installation was working once alsaconf ran.
I find that I can't compile alsa-driver 1.0.24 OR 1.0.23 under Fedora 14.
Compiling alsa-driver 1.0.24 fails with:
make[1]: Entering directory `/usr/src/kernels/2.6.35.11-83.fc14.x86_64'
CC [M] /home/Extra/Emerg/Download/alsa-driver-1.0.24/acore/hrtimer.o
In file included from /home/Extra/Emerg/Download/alsa-driver-1.0.24/acore/hrtimer.c:1:0:
[Code]....
what I did was searched a solution on google and i read something about install alsa-driver. So I downloaded it and tried to install it (took a very long time) and didn't installed (errormsg). When I looked a little further i saw my microphone was muted in the audio settings (DOH !)but now everytime i do an apt-get i get this error message from alsa-driver that want to setup
Quote:
sudo apt-get install gcc
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]....
I've installed both fluidsynth and qsynth, but get this error everytime I run qsynth. I'm trying to use my m-audio keyrig 49 just to practice playing the piano. I don't really care about having a whole DAW and whatever, I just want to play my keyboard. Maybe there is a better way than qsynth? Also, this happens:
Code:
/etc/rc.d/rc.alsa restart
Loading ALSA mixer settings: /usr/sbin/alsactl restore
No state is present for card K49
[code]....
I don't know that it has to do with my qsynth problem or not. I just thought I'd throw it in just in case it does. Also, xmms recognizes my keyboard in the alsa preferences, where the mixer device is.
Whenever I try to run a windows game under Wine I get an error that depict I have no proper sound driver. I checked the wine config and there was only OSS option that I think it would not help me to get sound working. I think I have to use Alsa Instead but I don't know how to add Alsa support to wine. By the way in need DirectSound as well. should i download it myself and add it to system32 or there is a better way?
I use:
ubuntu (Meerkat) 10.10
wine 1.2
I have also posted this as a question in ubuntu launchpad but I figure I have more of a chance coming across a solution this way- as I had been struggling with no sound issue (and other issues for so long now!) I first had alsa driver version that came with this 2.6.32-25 preempt kernel: ALSA driver 1.0.22, I believe. My maudio soundcard was detected but I couldn't get sound so I found a suggestion in ubuntu forum to install lucid backports. This created 2.6.32-25 generic kernel which I didn't want since I need low latency (and still had no sound). I tried at first to compile and install Alsa driver 1.0.23 (following Ubuntu Sound Troubleshooting Guide), having booted into the preempt kernel- but ALSA driver 1.0.23 only installed into the generic backport kernel. So I proceeded to remove the 2.6.32-25 backport generic kernel via synaptic.
I once again only have my original preempt kernel 2.6.32.25 and 2.6.32.21 in my grub list. I discovered that I had no soundcard detected and no more ALSA installed, according to 'aplay -l' & 'cat /proc/asound/version' 'cat: /proc/asound/version: No such file or directory' so I proceeded to try to install Alsa driver 1.0.23 twice more but each time I get:
'bash alsa-info.sh --stdout
cat: /proc/asound/version: No such file or directory
grep: /proc/asound/cards: No such file or directory
cat: /proc/asound/cards: No such file or directory
cat: /proc/asound/modules: No such file or directory
[Code]...
I have a TV tuner card with its output connected to the CD in of an integrated sound card. Video is OK, and the sound also gets thorough (to the line out) when running xawtv, for example. However, I found no ways yet for recording it.I'm running Ubuntu 10.10 with ALSA drivers. Pulseaudio was running in the beginning, now it doesn't, but it doesn't seem to make much difference.
capturing with VLC, using plughw:0,0 as the audio capture device. (Result: no sound track at all in the resulting video.)arecord, then aplay.alsamixer. The capture source is set to "CD" (and on the input side it's also "CD" where I can effectively modify the volume for audio going through...), but still no result.
I don't have any sound after installing Linuxant ALSA driver. I tried uninstalling it and the hsf driver, didn't help. Reinstalling ALSA didn't help either. Ubuntu doesn't detect my sound card, and aplay doesn't detect my sound card. lspci -v output for sound card:
Code:
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
Subsystem: Acer Incorporated [ALI] Device 0126
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10
[code]....
I am attempting to install the Linuxant ALSA driver to make my sound work properly (speakers muting when headphones plugged in). This worked on Lucid, but on Maverick the installation fails at the "building modules" stage. It directs me to a logfile, which I have reproduced here:
Code:
rm -f .depend *.o snd.map*
rm -f modules/*.o modules/*.ko
rm -f *~ out.txt *.orig *.rej .#* .gdb_history
rm -f doc/*~
rm -f config.cache config.log config.status Makefile.conf
rm -f utils/alsa-driver.spec .....
make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-22-generic'
make: *** [compile] Error 2
The package partially installed I have no sound at all. I have kernel headers and every related -dev package I can think of installed. I'm running 64-bit; could that be an issue?
I had normal sound... i did try to install alsa-driver-linxant which didnt succeed, and now i dont have any sound... i can see a red cross near my volume icon.
here's some output:
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.59
!!################################
[code].....
Months ago, I tried to get my notebook's internal modem working, by installing alsa-driver-linuxant-1.0.23.1-1.noarch.rpm and hsfmodem-7.80.02.06x86_64full-1.x86_64.rpm, both from Linuxant. This did not work, but my system was stable and the sound device (Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)) worked fine.In the last few days, I upgraded to the latest kernel 2.6.35.12-88.fc14.x86_64. Boot failed due to an inability to build the alsa-driver-linuxant against the kernel source (I have the kernel source in /usr/src/kernels/2.6.35.12-88.fc14.x86_64/). The message in boot.log was:
Code:
ERROR: Build failed. Please review the build log at /var/run/alsa-driver.1367.log.
/var/run/alsa-driver.1367.log contains the error:
[code]....
I have recently been forced to do a hardware upgrade (my previous mobo died). Now, sounds works ok with,amarok because kde has recognized the new hardware and switched to it.
..... does not work, likely because flash uses alsa-oss which is probably not configured automatically. I have tried uninstalling and reinstalling both alsa-oss and flash, but it didn't solve the problem.
Recently i put a DAC connected to the CL X-FI board via the SPDIF interface. Result is i can listen only one channel, the left one (hedaphone) while using the xmms, audacious.
The thing is that i'm able to listen both channels if i use the VLC configured with the same output, that is hw:2,4.
Info:
[root@kryptonbox ~]# lsmod | grep snd
snd_seq_midi 12353 0
snd_ctxfi 80557 1
snd_seq_dummy 7877 0
[Code]....
I am attempting to load CentOS 5 on an Acer 6900 desktop and I'm not even getting out of the starting gate. I am familiar with using linux but not the install procedure which is why I am beginning to dive into this. However, when I bring the system up off the Linux boot disk and go to install it's not even giving me the option of the controller so I can begin installing the os from the dvd-rom. This is what acer lists as the controller for the 6900: ich8 serial ata storage controller 2820 linux driver. I cannot find this driver for linux anywhere.
View 10 Replies View Relatedi upgrade a machine running centos 5.4 to 5.5 this morning. After the update the X start i saw the pointer and a black backgroud only the desktop doesn't appear.The machine is a barebone with this configuration
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)[code]....
and i solved the black screen problem changing the driver for i810
Section "Device"
Identifier "Videocard0"
Driver "i810"
EndSection
I have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.
Using these instructions....
[url]
When I make the WLAN driver, I get this:
I have tried to install and configure Hudson in centos distro version 5.Installed hudson with tomcat by deploying .war files.after configuration was completed, builded a project.It displayed build was completed successfully.but I was not able to download output of build.
So I rechecked configuration,found that i havent set artifact file pattern to archive. how to set artifact file pattern and how to get build output. how to manage hudson by using configure system and configure options.what is the correct way to configure public hudson?.
How do I know what sound system my Centos 5.5 install is using and how would I configure which soundcard output to use? I want to use the digital coax output from my M-Audio PCI soundcard, which appears to be detected and loaded. When I launch MPD, it autodetects an alsa sound system, but programs like alsamixer don't exist and I can't hear any sound out of the digital coax output. I haven't checked the 3.5mm stereo out yet.A little confused as to which documentation to be looking at at this point.
View 9 Replies View RelatedI installed Ubuntu today, and to my great pleasure i found that my Wacom Intuos 3 tablet worked as perfectly as when the windows driver is freshly installed. Unfortunately, i installed no driver, and therefore can find no way to configure my tablet.
What i need configured is the tablet proportion (i have two screens, so the mouse moves too fast in the X direction compared to the Y direction) and what the pen buttons do in different programs. The wrong button is currently right click.
I am brand new to this forum! I have spent some time on other Linux forums but based on my usage of CentOS I figured that it would be best to come straight to the pros. I've been using CentOS for a while now, mostly as a web server. Actually I use it as the base and installed Parallels Plesk Control Panel.
Anyway I want to setup a VPN and so far I haven't found any real solid documentation on how to do that! Yes I could install DAG/RPM Forge but what I really want to know how to do it from scratch. What I mean by scratch is that I want to download the tar.gz package from openvpn.net and then build it as required. I don't know much about building or compiling a package so that is why I have come here for help! I am guessing that I need to compile openVPN with openSSL and probably a few other packages... I could use openSWAN but I don't want to.
My daughter just broke her laptop screen. I can order another LCD - no problem, but until then she wants to use an external monitor. With Windows, this used to be no big deal, because I would hook up a monitor, hit a key combo on the keyboard, and everything would come up on the other monitor.I know how to do this using the GUI, but unfortunately, I can only see about a 2 inch strip at the top of her computer. I can see the gnome menu bar, and when I go into the Nvidia configuration, I can't make out anything below the tops of the two monitors it detects. (I was able to get it to detect both displays, but I can't see to press the "configure" button.)What I need to do, is configure the new monitor from the command line using the two inches of visible monitor that I have at the top of her broken LCD.
View 8 Replies View RelatedI'm trying to configure my network card using the b43 driver. I'm running 10.04.2 on the kernel version 2.6.35-25-generic-pae.
Surprisingly, I was able to connect to my home wireless network using the b43 driver without a problem. The only issue is that it doesn't automatically connect. I have to use the following command in order to get it to work:
Code:
After typing my password, I wait for 10 seconds and am automatically connected. My question is, how do I configure my system to do this for me permanently (or at least automatically) so I don't have to type it every time I log on?
how to configure squid in linux redhat & also how to fid out n/w card driver
View 2 Replies View RelatedI've a Centos 5.1 server on S5000vsa Intel board with 6 bay HD in raid 1 mode (2 HD), and working fine until I've decide to make a yum update. Today the Centos is 5.4 but seems necesssary to upgrade the megasr driver for the raid function (i.e. , is not possible to contact the raid firmware trought Web Console 2). I've download the last megasr driver from Intel and I follow the instruction to upgrade the driver with s.o. installed, but when I start the server and choose via grub the new img boot file, the display show :
megasr.ko invalid module format -1 and stop. The linux version is the same in the machine (uname -a) and from the driver (2.6.18-164.9.1.el5). Another question : in Intel instruction spoken about megasr.o , but on img file I found a megasr.ko . I think instructions referre to old linux 2.4
