CentOS 5 Hardware :: Driver For Ich8 Serial Ata Storage Controller 2820 Driver
Feb 17, 2010
I am attempting to load CentOS 5 on an Acer 6900 desktop and I'm not even getting out of the starting gate. I am familiar with using linux but not the install procedure which is why I am beginning to dive into this. However, when I bring the system up off the Linux boot disk and go to install it's not even giving me the option of the controller so I can begin installing the os from the dvd-rom. This is what acer lists as the controller for the 6900: ich8 serial ata storage controller 2820 linux driver. I cannot find this driver for linux anywhere.
View 10 Replies
ADVERTISEMENT
Feb 26, 2011
I have searched the WEB cannot find a driver, trying to print a document via USB.If I could find the specifics I could write a driver, though I have not done that kind of work for years.
View 5 Replies
View Related
Feb 4, 2011
My gentoo laptop doesn't have a serial port, so I got a usb-serial (RS-232) adapter from ebay. However when I plug it in, the only thing dmesg mentiones is: Code:usb 5-1: new full speed USB device using uhci_hcd and address 2I've tried to look for a kernel driver in "make menuconfig" by pressing "/" and typing 232. Nothing about RS-232. Device Drivers -> Character drivers -> Serial drivers has 8250 and UART as a module. Device Drivers -> USB support -> USB serial converter support has in-kernel: USB generic serial driver, and FTDI Single port driver as a module, but it still isn't getting recognized.Is there some module i forgot to enable, or do i have to download a separate module from somewhere?
View 5 Replies
View Related
Jun 26, 2011
I am unable to find Atheros AR8132 PCI-E Ethernet Controller driver for CentOS which is installed on my netbook.
I contacted DELL to provide me the driver and they said that they do not support Linux on netbook and I have to arrange it myself.
I told them that I don't need help in installing I just need the driver file to which they said that they don't have driver for Linux.
NIC is getting detected and works fine on the same netbook (Am dual booting Windows7/CentOS) with Windows7
When I type: ls -l /dev/ it does not show up eth0. Same result with ifconfig. When I type lspci | grep net it does show up something like Atheros Communications AR8132 L1 PCI Gigabit .
View 4 Replies
View Related
Jan 27, 2011
Is it possible that CentOS 5.5 does currently not support Oxford's OXPCIe952-F serial controller chip? We've added one of those PCIe x1 cards to one of our servers since we need additional serial interfaces but it doesn't seem to work. Instead of three serial ports (the server comes with one already, the controller adds two more) we still only have ttyS0:
Quote:
root/linux2$ zgrep ttyS /var/log/*
/var/log/dmesg:serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
/var/log/dmesg:00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[code]....
View 14 Replies
View Related
May 16, 2010
i upgrade a machine running centos 5.4 to 5.5 this morning. After the update the X start i saw the pointer and a black backgroud only the desktop doesn't appear.The machine is a barebone with this configuration
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)[code]....
and i solved the black screen problem changing the driver for i810
Section "Device"
Identifier "Videocard0"
Driver "i810"
EndSection
View 2 Replies
View Related
Mar 14, 2010
Well, when I run alsaconf, it finds my 82801H and I go on to setting it up, it says it will run, but it doesnt run.
Quote:
Now ALSA is ready to use.
For adjustment of volumes, use your favorite mixer.
But my song don't work, ..... works, but no sound in that, and i have tried running alsamixer to raise the volume to the peak.
I have a vague idea that, this sound card has difficulty in linux but all I get is 3 year old patches for gutsy gibbon and fixes that are non-slackware so I dont have the files and what not.
I have been trying, but never seem to understand why it says it works when it doesnt work.
Oh turns out, from thinkwiki, [url]
Its AD1984 actually, and it didn't work on 2.6.24.2 mine is 2.6.29.2 .
View 4 Replies
View Related
Feb 20, 2010
I have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.
Using these instructions....
[url]
When I make the WLAN driver, I get this:
View 2 Replies
View Related
Feb 6, 2010
I have a VT6421 based raid controller. lspci shows this: 00:0a.0 RAID bus controller: VIA Technologies, Inc. VT6421 IDE RAID Controller (rev 50) The drivers that come with it appear to have been compiled against an old kernel (I'm guessing). When I try to load them I get invalid module format. dmesg shows this: viamraid: version magic '2.6.11-1.1369_FC4 686 REGPARM 4KSTACKS gcc-4.0' should be '2.6.27.7-smp SMP mod_unload Does anyone know of a way to get this to work? I found the source for this, but it appears to only support Fedora, Mandrak, and RedHat. I can't get it to compile or make a driver disk.
View 3 Replies
View Related
Jul 25, 2010
Is there a way i can remove/disable the USB Host controller driver from the kernel, without kernel compilation..
If not, how should i go about recompiling the kernel to have this module disabled..
View 9 Replies
View Related
Jul 25, 2010
Am a quite naive user of linux. I would like to know whether there is a way in which I can remove/disable the USB Host controller driver from the kernel, without kernel compilation..Am using a custom system which has linux in it (Fedora) If not, how should i go about recompiling the kernel to have this module disabled.
View 1 Replies
View Related
Mar 23, 2010
I just installed the latest version of Mint xfce on my old inspiron 8000 with a microsoft MN-120 pci ethernet card, and though the card shows up as hardware, it is not recognized as a network interface. I believe there is no driver loaded for it.
It's an old card, but it seems the kernel still supports it. There are instructions for activating the dc driver that appears to be the proper driver for this chip set, but those instructions originated from freebsd and I'm not sure they translate well. See here:[URL]
I did find a kernel config file, but I was afraid to add the suggested lines to it because there were no other lines specifying "devices". They all started with "config".
View 2 Replies
View Related
Jul 3, 2011
i am having issues with networking on a certain liveCD.all ubuntu installs ive done on this machine im sure work fine, but i may have had issues with older backtrack versions.My issue is no networking on boot of SamuraiWTF, for those unfamiliar its based on ubuntu 9.04 There is nothing except lo loopback when i run 'ifconfig', and there is nothing in /etc/network/interfaces for eth0 either.
lspci shows a Broadcom driver, but the same command shows the model number etc on a newer ubuntu install on the same machine. This is:
Broadcom NetLink BCM57780
I have the latest .tar.gz of the tg3 drivers suggested by Broadcom, but im lost on how to install them.
-------------------------------------------------------
EDIT: it seems to be an issue with earlier kernels, i installed 2.6.35 and it worked but the kernel isnt mean for 9.04 i dont think, and now theres issues with the nvidia card
View 4 Replies
View Related
Feb 4, 2011
I am running Ubuntu 10.10 on my old Acer Travelmate 661 LCi. Device manager tells me: info.linux.driver i915. Is there a better driver, and if yes, where can I get it and how can I install it.
View 1 Replies
View Related
Jan 23, 2010
i am writing block deriver for usb device in linux i want to read and write data to/from usb device i already registered usb device with my driver and opened the handle for the usb device now i need to send scsi command to usb device to make it work but i dont have knowledge about scsi commands and how and where to use them now i need to know which scsi command i need to pass to the usb device and how can i pass that command to usb device also i need some information like how to register host controller with my usb driver
if anyone knows about this or where can find the tutorials / documentation/ framework for the same.
View 1 Replies
View Related
Aug 23, 2010
I have a dell PC running on Fedora 12, and I would like to install this SCSI controller card from adaptec:[URL]I see that the driver for Linux is available only as source code. Can somebody please indicate me how to proceed? I am not advanced enough in Linux to know what to do with it myself...I downloaded the most recent (v2.0.26) Source Code for Linux Kernel v2.6 on all platforms.Here are the contents of the tarball (if it helps in any way):
03/09/2007 08:42 PM 10,821 aic7770.c
03/09/2007 08:42 PM 8,088 aic7770_osm.c
03/09/2007 08:42 PM 51,838 aic79xx.h
[code]....
View 2 Replies
View Related
Jan 1, 2011
For years I have used a Slax live CD on a laptop to clone internal HDDs to USB HDDs. I recently purchased a Sony VPCF136FM laptop with Intel Core i7 CPU. It apparently has USB 3.0 ports. The problem is the USB ports are dead with Slax. There is a USB devise driver available for Windows 7 from Sony but nothing for Linux operating systems. Can this driver be ported to Linux? It is an exacutable (XXX.exe). The chip for the USB Host is from Renesas Electronics (no help there, either). Where can I find a device driver to use with Slax and how would I install it?
View 3 Replies
View Related
Feb 13, 2010
I recently installed Ubuntu 9.10 on an old family laptop. It is a Compaq Presario V2000. Everything works perfectly except no wireless networks are recognized, even though I know there are available networks. My network controller is detected but is not doing it's job, which is finding available wireless networks! Using "system testing" I found this out about my network controller:
"Detecting your network controller(s):
Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)"
url
View 3 Replies
View Related
May 28, 2011
I patched my wireless driver in order to support packet injection. Using this tutorial:
- Install the Firmware:
Code:
- Create new directory:
Code:
- Now disconnect Internet and unload all your driver (use rmmod command)
- Move/copy the Compat-Wireless patched in /usr/src/drivers directory and unpack the drivers:
Code:
Blacklist the wl driver: (STA driver)
Code:
Currently I'm running Ubuntu 10.10, Kernel 2.5.35-29-generic. I have a Broadcom 4318 for my WLAN and a Broadcom 4401-B0 for my ethernet. I followed the tutorial and I managed to get packet injection working on my WLAN; however, my ethernet connection isn't working. I tried sudo modeprobe b44, but I get the following message:
FATAL: Error inserting b44 (/lib/modules/2.6.35-29-generic/kernel/drivers/net/b44.ko): Invalid argument
View 9 Replies
View Related
Nov 5, 2010
Sometimes the linux install CD does not recognize the disk controller
I am asking is there a way to customize the disk and add such driver
if yes :
what files from the driver to put and where to do that?
View 1 Replies
View Related
Apr 21, 2011
I have an ASUS P5Q PRO motherboard with an integrated Atheros AR8121/AR8113 PCI-E Gigabit Ethernet Adapter.I installed Ubuntu 10.04 "Lucid" 64bit Kernel version 2.6.32.21 I have read that the driver isn't in the kernel, but there's a strange thing :
First if I try to run lspci from command line it doesn't reports Atheros Ethernet Controller.
Second If I try to run lshw -C network from command line it doesn't reports Atheros Ethernet Controller.
Third if I run ifconfig it only returns my loopback address.
Can I suppose that my Ethernet Intel Gigabit Controller is broken or that Atheros driver is missing?
View 4 Replies
View Related
Aug 29, 2010
where i can find a driver for Multimedia audio controller: nVidia Corporation nForce2 AC97 for Linux
View 5 Replies
View Related
May 10, 2010
I'm trying to set rxtxSerial to work so a Java app has access to a serial port (via SiLabs CP210x driver, port /dev/ttyUSB0). When I use update-alternatives --config java, there are 3 alternatives which provide `java'. I have tried openJDK and Sun. Both fail but with completely different messages.
[Code].....
View 9 Replies
View Related
Jun 18, 2010
I can not get the node or cloud controllers to startup using the init.d scripts. I have a fresh install of CentOS 5.4 with Eucalyptus 1.6.2 I have compiled Eucalyptus and all packages using the RPM supplied from Eucalyptus and utilizing yum installer. I do not currently have any processes or applications listening currently on the ports on the boxes as well. I think it may be a permissions issue or something because I get a "permission denied error", but I am not sure if it is Eucalyptus or CentOS. It looks as if it is not binding to the address on the interface of the NIC. It may be something else however. I have the Node controller, Cloud controller, and Cluster controller on seperate physical boxes. When I try to run either the cloud controller or the node controller I get this message:
Cloud Controller:
[root@cluster-cont ~]# /etc/init.d/eucalyptus-cc start
Starting Eucalyptus cluster controller: (13)Permission denied: make_sock: could not bind to address [::]:8774
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:8774
[code]...
View 2 Replies
View Related
Aug 25, 2010
i want to try with a small application in linu in that i want to read some data from controller using serial port and i wanna transfor that data to another meachin in the network for this i want serial port interfacing programming as well as socket programming.
View 1 Replies
View Related
Dec 17, 2009
Is it normal that the free Mesa driver is alot faster than the ATI propietary driver?, at least for desktop usage. That is, using both latest drivers, 9.11 and 7.7
View 3 Replies
View Related
Jun 13, 2011
There is one thing missing (I think) a clear guide to clearing out Nvidia and replacing it with nouveau. For all but hardened gamers, nouveau on 11.4 delivers. It also removes one more barrier to what I think is the intended goad of Tumbleweed.The problem IMHO is not that there are no clear guides. The problem is there are too many. No sooner does one person do a guide (that is clear) and someone else who does not like some point writes another guide that they think is more clear (but in fact is less clear in other aspects). And this goes on ad infinitum.IMHO we have too many guides - many of which are sufficient clear ... but the VAST number only serves to confuse users more.
Having typed that, IMHO this is NOT a Tumbleweed specific issue, but its MUCH WIDER in scope and hence does not belong as a discussion in this Tumbleweed thread.
View 9 Replies
View Related
Jun 21, 2010
It has been haunting me for weeks and I haven't been able to fix it so far: When I installed the wireless driver 43XX series on my laptop using a wired internet, I saw the wireless network for a while and after I rebooted my system, My kernel(31) got corrupted and I got error "kernel Panic (and some sync error)",Thus I started using an older kernel(14),Now When I install wireless driver or mobile broadband driver(wvdial), they get vanished after the reboot and my mobile device modem isn't detected.But they are installed in my system(as shown by synaptic package manager but doesn't seemt to work) I desperately want to use mobile broadband.
View 1 Replies
View Related
Jun 21, 2010
How To: Uninstall/Remove Old Wireless Driver to make way for New Driver (RTL8191SE)?
Here's the new driver:
I have been having trouble with my wireless connection intermittently disconnecting and reconnecting repeatedly (sometimes every couple of seconds). I posted a thread about this here on Ubuntu Forums titled: Ubuntu 10.45 & NetworkManager Applet 8.0: Connects & Disconnects Frequently.
View 2 Replies
View Related
Apr 15, 2010
This is my first attempt with Yum and Fedora for that matter. I need to load a print driver and network driver for an MX860 printer. I downloaded the drivers and they are in the download folder. When I try to install I get what is below. How do I resolve? Do I need to identify where the driver is? If so, how?
[compaq@compaq ~]$ su -c'yum install cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz'
Password:
Loaded plugins: refresh-packagekit
updates/metalink | 15 kB 00:00
Setting up Install Process
No package cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz available.
Nothing to do
[compaq@compaq ~]$
View 14 Replies
View Related
