CentOS 5 Hardware :: Configure Soundcard In Centos 5.5 Clean Install?
Aug 10, 2010
How do I know what sound system my Centos 5.5 install is using and how would I configure which soundcard output to use? I want to use the digital coax output from my M-Audio PCI soundcard, which appears to be detected and loaded. When I launch MPD, it autodetects an alsa sound system, but programs like alsamixer don't exist and I can't hear any sound out of the digital coax output. I haven't checked the 3.5mm stereo out yet.A little confused as to which documentation to be looking at at this point.
View 9 Replies
ADVERTISEMENT
Oct 1, 2009
I've done some installations and configuration of linux systems for different needs and I've never had such a problem:
* The system is Supermicro X6DVL-G mainboard with two Nocona Xeons @ 2,8 GHz, 2 GB DDR333 RAM, 2x160GB Seagate ST3160827AS SATA HDD, ATi RAGE 128 VGA and an external LG USB DVD drive.
* The role of this machine will be Joomla Web/Mail/FTP server for my company's website
I've tried FreeBSD, PC-BSD and now CentOS 5.3. The BSD based OSes installed and ran with no problem but I had trouble configuring them and I decided to move to something little more familiar. However the BSDs didn't detect the integrated Promise RAID controller but CentOS had no problem with that. After some fight with the initial setup I've managed to made it recognizing the external DVD and install the OS. I'm using the whole stripe for the OS, leaving the linux to determine and create the partitions. The installation went smoothly with no errors, but after restart I get the POST messages and then... NOTHING! No error, no panic, nothing, just a blinking cursor. The first thought, confirmed later by several posts I've read, it's the integrated RAID controller making the issue.
Well, I removed the stripe, disabled the controller from the BIOS and installed again, this time with the two separate disks - the sda is bootable with swap and ext3 and sdb is spare with ext3. THE SAME... Third time - only sda is configured for istallation - again NOTHING. Fourth time - sda is configured for installation and No Bootloader option is selected - SAME.
View 6 Replies
View Related
Jul 15, 2010
Using CentOS 5 on a Toshiba laptop with an Edirol UA-4fx USB audio capture external sound card. I would like to be able to record internet radio and also record live sound from the USB card. The sound card that comes with the laptop is really bad.
I listen to the output from internet radio though the earphone jack on the USB card and the sound is really nice. I can record in Vista by running a line from the earphone jack on the USB card to the laptop mic jack and selecting "mic" as input in Audacity. The "mic" setting does not show up in Audacity in CentOS.
I tired Krec but do not see any input from the USB card, even though there is very nice sound great thought the card earphone jack. I do not understand the sound archetecture and would love to find a good "linux sound archetecture for dummies" article. Meanwhile can you suggest a simple way to record output from the USB card in CentOS?
View 1 Replies
View Related
Apr 12, 2009
I try to install the sound driver for a creative X-Fi card.
2 steps, make and make install.
make works at this moment, because I add #include <linux/delay.h> to both cthw20k1.c and cthw20k2.c. Otherwise you get the output
/home/hao/build/xfi/XFiDrv_Linux_Public_US_1.00/cthw20k2.c:1315: error: implicit declaration of function mdelay
make[2]: *** [/home/hao/build/xfi/XFiDrv_Linux_Public_US_1.00/cthw20k2.o] Error 1
make[1]: *** [_module_/home/hao/build/xfi/XFiDrv_Linux_Public_US_1.00] Error 2
[Code]....
View 19 Replies
View Related
May 12, 2010
If it possible to install and configure RHN on centos...........
View 4 Replies
View Related
Feb 10, 2010
how can i install and configure Apache-Ant .
View 1 Replies
View Related
Apr 15, 2009
I'm trying to install/configure a LTSP in CentOS 5.3
I have dhcp, nfs and tftp installed, but i can't install/configure XDMCP. I was reading some manuals and "hows to" and all says that, to configure XDMCP, i have to change de atribute "Enable = true" in the file "/etc/X11/gdm/gdm.conf", but i don't have this rute, only "/etc/X11/", gdm folder doesnt' appear :S also... why i can configure XDMCP?
When i run "ltspcfg", he says:
[root@localhost ~]# ltspcfg
ltspcfg - Version 0.11
Checking Runlevel....: 5
Checking Ethernet Interfaces
[Code]....
View 9 Replies
View Related
Jun 17, 2010
i want to install and configure vpn server on centos 5.5 final i want to work it like that my server is in other city or country, i want to connect it in other city or country and want to use remote server internet on my computer.
View 1 Replies
View Related
Jan 25, 2011
I've got CentOS 5.4 without access to internet (install all from DVD).When I try ti run Eclipse via remote desktop I've got error:
Quote:(.:30196): GLib-GObject-WARNING **: invalid (NULL) pointer instance
(.:30196): GLib-GObject-CRITICAL **: g_signal_connect_data: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed
[code]....
View 9 Replies
View Related
Dec 29, 2009
I am brand new to this forum! I have spent some time on other Linux forums but based on my usage of CentOS I figured that it would be best to come straight to the pros. I've been using CentOS for a while now, mostly as a web server. Actually I use it as the base and installed Parallels Plesk Control Panel.
Anyway I want to setup a VPN and so far I haven't found any real solid documentation on how to do that! Yes I could install DAG/RPM Forge but what I really want to know how to do it from scratch. What I mean by scratch is that I want to download the tar.gz package from openvpn.net and then build it as required. I don't know much about building or compiling a package so that is why I have come here for help! I am guessing that I need to compile openVPN with openSSL and probably a few other packages... I could use openSWAN but I don't want to.
View 6 Replies
View Related
Feb 24, 2011
I have centos with software firewall enable , but i want to set up hardware firewall can anybody guide how to install and configure hardware firewall in centos
View 3 Replies
View Related
Dec 11, 2010
I have installed the Cent OS but i don't know how to configure & install the multimedia player
View 3 Replies
View Related
Mar 2, 2010
I want to install the Empathy on my CentOS. And I configured, then I got a resposes:
checking gnome-doc-utils >= 0.17.3... no
configure: error: gnome-doc-utils >= 0.17.3 not found
But when I run "yum install gnome-doc-utils"
The system respond:
[root@localhost ~]# yum install gnome-doc-utils
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Setting up Install Process
Package gnome-doc-utils-0.8.0-2.fc6.noarch already installed and latest version
Nothing to do
View 9 Replies
View Related
Dec 15, 2009
how can I remove old kernel updates? Should I delete not usable kernel files from /boot ?
grub.conf was manual changed, here new config:
#vi /boot/grub/grub.conf
title CentOS (2.6.18-164.2.1.el5.028stab066.10)
root (hd0,0)
kernel /vmlinuz-2.6.18-164.2.1.el5.028stab066.10 ro root=LABEL=/ acpi=off noapic nodmraid
[code]....
View 3 Replies
View Related
Feb 12, 2010
I was running CentOs 5.3 and did a "yum upgrade" and got the following problem: Transaction Check Error: file /usr/share/man/man1/xdelta.1.gz from install of xdelta-1.1.4-1.el5.rf.x86_64 conflicts with file from package xdelta-1.1.3-20.i386
[code]....
It seems that somehow multiple entries were made for the xdelta package - how do I clean this up?
View 5 Replies
View Related
Jul 9, 2009
The first server I installed installed fine. The second server, installed with the same config, went to "kernel panic not syncing no init found try passing init= option in kernel" error. I tried reinstalling but it keeps going to that error after install reboot. The storage is ISCSI connected via Intel Server Adapter, which allows it to boot from ISCSI. Not sure if that's the cause for the problem, but the first server is connected to the same ISCSI and installed just fine.
Is there a way that I can make sure ISCSI module installs during installation? Although I think it is installed since it's able to copy the files and setup /dev/sda. I just wana make sure that it installs during setup.
View 1 Replies
View Related
May 3, 2009
I have tried to install debian 5.0 and 4.0 without any luck. I have both tried virt-manager and virt-install with both debian-501-i386-netinst.iso, and full dvd. I't always gives me the same error:Starting install.Could not find an installable distribution at '/xen/debian-501-i386-netinst.iso'
[Code]...
View 2 Replies
View Related
Jun 8, 2009
i didnt find a solution to a display problem im having. my server mobo is an asus k8n-dre with built in video. after the install(using built in video) the screen dosnt display fully as in black sections on the left and top of the screen. from the searching i did i found something about an "xrandr" command that would let me change the video settings but it didnt do anything with the black areas when i tried it. i also have a nvidia geforce 9500gt video card so i changed the jumper to boot from it and tried again. the black sections are still there but the centos display covers much more of the screen now. theres still about a third of an inch gap on the left hand side and about 1/4 of an inch on the top. ive also tried updating the software to see if it may be a driver issue but no luck. anyone know how or if it can fit to full sceen? the screen displays up to 1440x900 if im not mistaken but with the built in video it gave me lots of display options including the 1440x900. after changing to the nvidia card it only shows 800x600 and 640x480.
View 5 Replies
View Related
Feb 18, 2010
I am trying to install CentOS 5.2, and the installation ran out of disk space after running for about 2 hours.I checked the FAQ, and it said 1.2 GB. The disk is 3 GB. The default install was selected, and I think that it checks for sufficient available disk space before installing. Still, it ran for quite a while before announcing that it was out of disk space.The Installation Guide is not very helpful, since there is a blank page where the disk space requirement is supposed to be. I just picked the default installation. A search of the forums on "not enough disk space" did not return much.
View 13 Replies
View Related
Mar 23, 2010
I have successfully installed CentOS 5.4, and after choosing it from the GRUB menu, I am getting the following error message:1706-Smart Array Controller Extended BIOS Data Area Memory Corrupted. Int 13h BIOS Cannot Continue - System Halted.I'm using two SAS disks that came along with the server, left the default RAID configuration (1+0) on a P410 controller
View 5 Replies
View Related
May 10, 2010
I've got a box (prev used for WinXP) with 2GB Ram and a new 500GB HD to throw in there.Noticed on the Wiki CreatingUpdateMedia and reading as much as I can ramping up for this.I'm curious how I should partition this disk, and what other decisions I'll need to make on install.I see quite a bit of interest also in virtualization, and if I find a need, this could be useful too.Kernel upgrades?how to do? Does the disk have to be wiped or just use an alternate boot device to replace K on HD? I have a tech background in programming and some solaris, but *nix has grown up in the last 5 years.Hopefully devices will function and networking connectivity can be acheived without too much troubleshooting.
I'm doing this in part to be more educated, especially in the new world of web-hosting where you have a virtualized box, root and shell access, and need to manage it yourself. Beyond that even, my goal is to be able to work on my web-host by setting up a remote linux desktop, and I'll be looking for ways to configure that. There are clients out there (VNC, etc), but I'm not sure on the host-server configuration, and also the port-forwarding setup on my local router.
View 2 Replies
View Related
Jul 2, 2010
[URL]VMware Workstation 7.0.1 Release Notes has a list of supported OS:[URL]According to that, RHEL 5.4 is listed as supported for both host andguest but CentOS 5.4 is only for guest. This is quite strange and, ifit is true, that could be a serious issue.I succeed to install vmware workstaion 7.1 on centos 5.5, but have run-time error:
[root@ ~]# /etc/init.d/vmware start
Starting VMware services:
VMware USB Arbitrator [ OK ]
[code]....
View 7 Replies
View Related
Feb 25, 2009
I'm new on Dell PowerEdge 2900. I dont know how to install centOS 5.2 on it. whice OS type that I should select. at first I select RH enterprise 5 and it format HDD. already and I put centOS 5.2 in, but it was deny and eject that cd. when I power off it shown that
"root(hd0,1)filesystem type is ext2f2,partition type0x83
kernel/linux/vmlinz%(ksLocations)
Error is : file not found
press any key to continue"
View 5 Replies
View Related
May 1, 2010
I am trying to do a basic install of CentOS 5.4 on my embedded computer. It is a Linutop 2 system with a AMD Geode 800MHz CPU and 512Mb Ram. Have installed an IBM 40Gb 2.5" HD for OS storage. I am doing the install procedure in text mode. Everything goes as planned until I get to the package selection.
1. Booting from (i386) DVD with "linux text" parameter.
2. Skipping media check.
3. Selecting "English" install language.
4. Selecting "DK-latin1" as keyboard layout.
5. Selecting "Remove all partitions and create default layout" and selecting "no" to modifying partition layout.
6. Selecting "yes" to configure "eth0" and mark to enable "IPv4" on boot.
7. Selecting DHCP for IP configuration and Manual host name.
8. Setting time zone to "Europe/Copenhagen".
9. Setting root password to a 16 digit alphanumeric pass-phrase.
10. De-selecting "Desktop - Gnome" (no other entries selected).
When the system is checking for dependencies, an exception
Traceback (most recent call first):
File "/usr/lib/python2.4/site-packages/yum/packageSack.py", line 426, in returnNewestByName
raise PackageSackError, 'No Package Matching %s' % ui_pats
File "/tmp/treedir.22057/instimage/usr/lib/anaconda/yuminstall.py", line 1072, in getBestKernelByArch
pkgs = ayum.pkgSack.returnNewestByName(pkgname)
[Code]...
View 1 Replies
View Related
Jul 1, 2010
I've been trying for the past week to install an icecast server on my centos 5 VPS hosted through phurix.
I've tried compiling it, installing it from RPM. but im getting nowhere. Has anybody had any luck installing it, who wouldn't mind explaining how they went about it?
I've searched google for hours on end and all I can come up with is generic cent os 4 guides that just wont work. Im not the best when in comes to linux. I do a great job of copying and pasting to a shell prompt and can use ftp etc.
if this is any use.. heres the last output from my last attempt and compiling it...
[root@vps613 icecast-2.3.2]# ./configure --prefix=/usr/local/icecast
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... no
[Code]...
View 1 Replies
View Related
Oct 2, 2010
I am trying to run though the qmailrocks setup on a centos 5.5 and I am running into an issue when trying to telnet to port 25:
telnet localhost 25
Trying 127.0.0.1...
Connected to localhost.localdomain (127.0.0.1).
Escape character is '^]'.
Connection closed by foreign host.
Everything else seems to be working (telnet to 110), and I turned off the firewall entirely, but I still cannot telnet to port 25. I also get a blank error within squirrelmail when attempting to send mail out (ERROR:Message not sent. Server replied: ). I apologize for not going directly to the qmailrocks forum, but they are currently closed down (due to lack of funds). I also am a newbie, so I apologize for the lack of needed information. If anyone has any ideas, please let me know what information you would need.
View 2 Replies
View Related
Nov 6, 2010
I have an i5 Thinkpad running Windows 7 64-bit. VT is enabled in the BIOS. I have installed vmware server v 2.0.2 but am unable to install Centos 5.5 x86_64 as a guest OS. The steps that I followed are as follows:1. Created a new VM, specifying RHEL 5 64-bit as the intended guest OS (per vmware documentation - Centos is not available as a selection2. Downloaded all 8 iso files for Centos v5.5 64-bit3. Modified the CD/DVD drive to 'connect at power' and use an iso with the path pointing to the x86_64 iso 1 of 8When I power up the VM, the console window displays 'ISOLINUX 3.11 2005-09-02 Copyright (C) 1994-2005 H. Peter Anvin' and nothing else. The installation splash screen never appears. As a test, I downloaded the first of 7 iso files for the 32-bit version of Centos 5.5 and pointed the CD/DVD drive to that iso. In that case, the installation starts as expected. I would really like to get the 64-bit version installed and running.
View 3 Replies
View Related
Aug 9, 2011
I have tried to install and configure Hudson in centos distro version 5.Installed hudson with tomcat by deploying .war files.after configuration was completed, builded a project.It displayed build was completed successfully.but I was not able to download output of build.
So I rechecked configuration,found that i havent set artifact file pattern to archive. how to set artifact file pattern and how to get build output. how to manage hudson by using configure system and configure options.what is the correct way to configure public hudson?.
View 3 Replies
View Related
Jan 14, 2010
What i want to be able to do is create a custom kickstart for my centOS 5 server. I want to create a bootable cd that I can pop in my server and basically walk away for 45 minutes and I come back and its fully installed. All the directions I have read so far tell me that I have to create a seperate ks.cfg and then I need my original centos cd to get it booted. Then the cd will ask for where the ks.cfg file is and I have to type the location. I just want to pop the CD in and type in linux_clean or something and have it perform a custom install based on the information and specification in my ks.cfg. How can I go about doing this?
View 1 Replies
View Related
Jul 15, 2009
I am having a problem during a fresh install of CentOS 5.3 on an IBM Intellistation Z Pro 6221. I have tested the installation media (CDs). The install runs normally until I am asked to specify the appropriate keyboard.I take the default (English) and hit next. The keyboard and mouse keys become unresponsive though the mouse pointer moves. I can go no further than this. This behavior is the same whether I install in text mode or graphic mode. I have tried the noprobe installation option without success. The box I am doing the install on dual boots fine between Windows XP and CentOS 4.7 currently.Does anyone have an idea of what the problem may be?
View 2 Replies
View Related
