Software :: Fedora 14 X86_64 No Sound After Removing Alsa-driver-linuxant?
Apr 14, 2011
Months ago, I tried to get my notebook's internal modem working, by installing alsa-driver-linuxant-1.0.23.1-1.noarch.rpm and hsfmodem-7.80.02.06x86_64full-1.x86_64.rpm, both from Linuxant. This did not work, but my system was stable and the sound device (Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)) worked fine.In the last few days, I upgraded to the latest kernel 2.6.35.12-88.fc14.x86_64. Boot failed due to an inability to build the alsa-driver-linuxant against the kernel source (I have the kernel source in /usr/src/kernels/2.6.35.12-88.fc14.x86_64/). The message in boot.log was:
Code:
ERROR: Build failed. Please review the build log at /var/run/alsa-driver.1367.log.
/var/run/alsa-driver.1367.log contains the error:
[code]....
View 4 Replies
ADVERTISEMENT
Jun 5, 2011
how can i remove this driver ati-driver-installer-11-5-x86.x86_64.run from fedora 15 ? I cant seem to find the un-installer any where..
View 4 Replies
View Related
May 28, 2011
I have a TV tuner card with its output connected to the CD in of an integrated sound card. Video is OK, and the sound also gets thorough (to the line out) when running xawtv, for example. However, I found no ways yet for recording it.I'm running Ubuntu 10.10 with ALSA drivers. Pulseaudio was running in the beginning, now it doesn't, but it doesn't seem to make much difference.
capturing with VLC, using plughw:0,0 as the audio capture device. (Result: no sound track at all in the resulting video.)arecord, then aplay.alsamixer. The capture source is set to "CD" (and on the input side it's also "CD" where I can effectively modify the volume for audio going through...), but still no result.
View 2 Replies
View Related
Jan 3, 2010
I don't have any sound after installing Linuxant ALSA driver. I tried uninstalling it and the hsf driver, didn't help. Reinstalling ALSA didn't help either. Ubuntu doesn't detect my sound card, and aplay doesn't detect my sound card. lspci -v output for sound card:
Code:
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
Subsystem: Acer Incorporated [ALI] Device 0126
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10
[code]....
View 7 Replies
View Related
Mar 27, 2010
I had normal sound... i did try to install alsa-driver-linxant which didnt succeed, and now i dont have any sound... i can see a red cross near my volume icon.
here's some output:
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.59
!!################################
[code].....
View 3 Replies
View Related
Oct 19, 2009
I recently upgraded my x86_64 system from FC8 to FC10 using Pre-Upgrade. (related blog link) It appears that the upgrade process installed a steaming pile of i386 packages that are duplicates of existing x86_64 packages. I now get update errors because of this package clash. I have searched the fora and the most progress I've been able to make so far is: I apparently had 8 unfinished yum transactions so I did yum-complete-transaction 8 times and have no more incomplete transactions.
The output of package-cleanup --dupes is not very helpful:
Code:
[tim@servy ~]$ sudo package-cleanup --dupes
Setting up yum
Loaded plugins: refresh-packagekit
Yet I still get transaction errors when I run updates via synaptic. It checks dependencies and downloads everything and errs when testing changes. This is the error it gives at the moment:
Code:
Test Transaction Errors: file /etc/gconf/schemas/gweather.schemas from install of libgweather-2.24.2-1.fc10.x86_64 conflicts with file from package gnome-applets-1:2.20.1-1.fc8.i386
[code]...
View 14 Replies
View Related
Feb 24, 2011
I find that I can't compile alsa-driver 1.0.24 OR 1.0.23 under Fedora 14.
Compiling alsa-driver 1.0.24 fails with:
make[1]: Entering directory `/usr/src/kernels/2.6.35.11-83.fc14.x86_64'
CC [M] /home/Extra/Emerg/Download/alsa-driver-1.0.24/acore/hrtimer.o
In file included from /home/Extra/Emerg/Download/alsa-driver-1.0.24/acore/hrtimer.c:1:0:
[Code]....
View 8 Replies
View Related
Dec 29, 2010
I am having problems getting sound to work. I have pasted my output from AlsaInfo.sh in hopes that someone can assist me. I have been able to fix this with the AlsaCompile scripts for Ubuntu. I am wondering if this is a distro related issue. If not I will gladly send to the alsa project.
[url]
- One sidenote that I will mention is the fact that I DO HEAR SOUND from the following command (and only this command)
Code:
View 5 Replies
View Related
Apr 12, 2011
I just responded to a (packagekit?) prompt to update packages, which included new kernel 2.6.35.12-88.fc14.x86_64. I use nVidia on my notebook and usually the new driver is installed automatically. This time, the computer would not boot to the stage that the nVidia logo appears, indicating the driver is not present. I edited grub.conf to take me back a version and I am now running under the previous kernel 2.6.35.11-83.fc14.x86_64. I tried a yum search for kmod-nvidia-2.6.35.12-88.fc14.x86_64 and nothing was found. I have enabled these repos:
[Code]...
View 4 Replies
View Related
Sep 1, 2010
Fedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:
Code:
Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored
[code]....
I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?
Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?
View 5 Replies
View Related
Apr 29, 2010
I'm having no sound and no flash workin on my newly updated F12 kde x86_64 desktop, I could get back sound by yum removing pulseaudio, but installing flash ( thru mjmwired instructions), get pulseaudio back installed.
View 3 Replies
View Related
Sep 11, 2010
My sound card isn't being found on F13, it's a VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60). I ran alsa-info and posted it to the following url:
[URL]
I've had these problems before intermittently and it was working until I rebooted recently. I've also attached my yum log if there was something updated that affected it.
View 1 Replies
View Related
Apr 19, 2011
I have motherboard Gigabyte GA-M61PME-S2P with nvidia hda sound card and I have no sound output using line in input. I've already tried to compile actual realtek linux driver but it didn't help. It looks ok because using gnome-volume-control I can see that there is music - volume bar is moving - and I can record it but I can't hear that on speaker live. I have also only 2 channel output hardware configuration. Alsa mixer have all channels but changing volume adjust didn't help. some information:
[Code].....
View 6 Replies
View Related
Aug 9, 2010
I am trying to update ALSA drivers which are built-in in the kernel.
I downloaded the latest ALSA drivers 1.0.23 and tried to compile but came with this error (that is the last part of it)
Code:
*** NO PREDEFINED KERNEL COMPILER IS DETECTED
*** Assuming the same compiler is used with the current system compiler.
[Code]....
Is there a way to remove the ALSA driver from the kernel so I can configure and compile the new ALSA driver ?
View 1 Replies
View Related
Jan 7, 2010
I can not set default sound card for alsa. It detects my sound card and I can play audio with xmms when I config that to use alsa and my intel sound card, but other applications which use default alsa sound card, and also pulse audio, can not play any sound.
View 2 Replies
View Related
Feb 11, 2011
I just built some machines with the Intel 82574L gigabit ethernet chip, loaded Fedora 14, and discovered a problem with the e1000e driver dying after a few minutes. A little time spent perusing the web told me that the same driver had problems in Fedora 12 and Fedora 13 as well. Congrats to Fedora for the hat trick.As of kernel 2.6.35.10-74.fc14.x86_64, e1000e driver 1.0.2-k4 still had bugs.[URL]
View 6 Replies
View Related
Jul 11, 2011
Is it possible for plymouth to work with the ATI Catalyst driver installed in Fedora 15 x86_64?
Is it that plymouth requires KMS and Catalyst doesn't provide it? With the nvidia driver, I could put a vga= line in grub and plymouth would run. Is there something similar for catalyst?
View 3 Replies
View Related
Aug 2, 2011
I just got the upgrade for the Linux Kernel version 2.6.40-4 on my Fedora 15 x86-64 box today, and the installation completed with no problems. However when I rebooted after doing the upgrade, I noticed that I had no sound. I use an ATI Radeon HD 4350 video card, and the opensource ATI driver, and use the HDMI audio from it for sound, since my monitor has a sound output jack on it. I've booted into the previous kernel (2.6.38.8-35), and sound works fine. I've tried with the new kernel in both KDE (my default desktop environment) and XFCE to get sound, and it does not work in either one. I've tried installing the VLC Phonon Backend instead of the GStreamer Backend, reinstalling Pulseaudio, reinstalling Alsa, modprobing the necessary modules needed for the card, checking all configurations with the available Pulseaudio tools (paprefs, pavumeter, pavucontrol), checked the volumes using alsamixer, and reinstalling the ALSA Pulseaudio plugin. After trying all of these, I can still get no sound out of any application, and I also noticed that Flash video plays at 2-3 times it's normal speed after the upgrade. Again, these problems do not occur on my previous kernel. Did I maybe overlook something, or can anyone else think of something I could try?
View 14 Replies
View Related
Aug 21, 2011
I just removed Pulseaudio from both Fedora and Kubuntu due to the way it stalls other programs from launching after logging into KDE. After rebooting Kubuntu, KDE sounds, JuK and VLC all had sound, presumably via ALSA.
However, Fedora has KDE sounds but no sound in JuK or VLC. When I launch JuK, KDE reports that the HDA Intel analogue device does not work. Could this relate to Gstreamer? If Fedora falls back to ALSA if Pulseaudio is removed, does Gstreamer require additional plugins? Kubuntu has "gstreamer0.10-alsa", but Fedora doesn't seem to have an equivalent.
View 3 Replies
View Related
Mar 17, 2011
I m trying to install Alsa for playing wav files I typed this: aptitude install alsa-base It started removing a lot of software from debian. Is that expected with that command? Do I need to install another "base" to bring things back?
View 4 Replies
View Related
Feb 18, 2011
I want to remove pulse and install alsa instead but I can't seem to be able to do it. I tried to search for all packages with "pulse" in their names and purging them but it didn't work because aptitude wanted to remove all of the packages that used pulse with along with pulse.
View 2 Replies
View Related
Jul 10, 2010
It was recommended to me that I remove pulseaudio and re-install alsa. All the howtos on reinstalling alsa had instructions for re-installing alsa from the source. Is it possible to re-install alsa from the repos? If so what are the necessary packages that I need to install, for a complete re-install of alsa?
View 1 Replies
View Related
May 4, 2009
The only user that can make the sound card work on a F10 x86_64 system is root. For non root users, I am not seeing any error messages when a app tries to use/access the sound card, just nothing plays. As I said, for root everything works as expected. I am sure this is a permission/setup issue, but I have no idea where to start.
View 3 Replies
View Related
Nov 6, 2010
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies
View Related
Mar 15, 2010
I'm running Kubuntu 9.10 X64, and am using ALSA for my sound. I have no trouble with sound: VLC, Adobe's Flash plugin, Java, etc. all work properly. When I run the Gnash standalone player, sound does not work at all.
When I run Gnash in a terminal, I get this:
Quote:
View 5 Replies
View Related
Apr 30, 2011
I am trying to install the Linuxant ALSA driver on 11.04 from [URL]
From the error log:
Code:
287 /usr/lib/alsa-driver-linuxant/acore/pcm_native.c: In function 'snd_pcm_hw_params':
288 /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:489:2: error: implicit declaration of function 'pm_qos_remove_requirement'
[Code]....
This worked fine on Ubuntu 10.04 (didn't try 10.10). Any way to work around this? Not having sound means Natty is kind of useless =/
View 4 Replies
View Related
Dec 9, 2009
Skype now runs, but there is an error when attempting to use voice. When opened in terminal the error is thus: ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM default Over and Over again. Am I missing a 32 bit library on my 64 bit machine? EDIT: Smiley face not intended
View 4 Replies
View Related
May 31, 2009
I have a Realtek ALC262 sound card, using the ALSA-1.0.20 driver， when I load the driver module manually using the command "modprobe snd-hda-intel model=basic", the card can work correctly, but I do not know how to modify the config file "modules.conf" or others to add the model type, so that the driver module can be load automaticly when the computer is startup, anyone knows that?
View 5 Replies
View Related
Oct 11, 2010
basically, sound will cut in and out. if i'm on videos, whenever sound cuts out, the video will continue for exactly two seconds and stop. sometimes i can reload the videos video, and it'll either play for two seconds without sound, or go normal, but usually for only a little time, not even a minute. similar problems for amarok, spotify and other applications using the sound card. this is the output when trying to restart the alsa demon
code:
root@muspellsheim:/etc/rc.d# /etc/rc.d/rc.alsa restart
loading alsa mixer settings: /usr/sbin/alsactl restore
unknown hardware: "ich4" "realtek alc650f" "ac97a:414c4723" "0x1462" "0x5770"
hardware is initialized using a guess method
/usr/sbin/alsactl: set_control:1255: failed to obtain info for control #11 (no such file or directory)
/usr/sbin/alsactl: set_control:1255: failed to obtain info for control #12 (no such file or directory)
output of /etc/modprobe.d/sound.conf
code:
root@muspellsheim:/etc/rc.d# cat /etc/modprobe.d/sound.conf
alias snd-card-0 snd-intel8x0
alias sound-slot-0 snd-intel8x0
some of the utput of lspci -v
i've tried reconfiguring alsa by using the alsaconf application, which didn't help. the output from restarting the alsa demon, may indicate that the correct driver isn't loaded.
View 8 Replies
View Related
Aug 25, 2010
These should be my last pleas for help with regard to Fedora 13. I've been unable to turn off the notifications that appear in the top right corner, despite a decent amount of searching on google. I can't remove any notifications package without removing a bunch of important software along with it. Also, F13 refuses to "Safely Remove" either of my external disks. I have to yank out the usb cord, touching wood each time.
View 5 Replies
View Related
