CentOS 5 Hardware :: Intel S5000Vsa And RAID Driver With Centos 5.4?
Dec 31, 2009
I've a Centos 5.1 server on S5000vsa Intel board with 6 bay HD in raid 1 mode (2 HD), and working fine until I've decide to make a yum update. Today the Centos is 5.4 but seems necesssary to upgrade the megasr driver for the raid function (i.e. , is not possible to contact the raid firmware trought Web Console 2). I've download the last megasr driver from Intel and I follow the instruction to upgrade the driver with s.o. installed, but when I start the server and choose via grub the new img boot file, the display show :
megasr.ko invalid module format -1 and stop. The linux version is the same in the machine (uname -a) and from the driver (2.6.18-164.9.1.el5). Another question : in Intel instruction spoken about megasr.o , but on img file I found a megasr.ko . I think instructions referre to old linux 2.4
View 3 Replies
ADVERTISEMENT
May 16, 2010
i upgrade a machine running centos 5.4 to 5.5 this morning. After the update the X start i saw the pointer and a black backgroud only the desktop doesn't appear.The machine is a barebone with this configuration
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)[code]....
and i solved the black screen problem changing the driver for i810
Section "Device"
Identifier "Videocard0"
Driver "i810"
EndSection
View 2 Replies
View Related
Nov 20, 2009
I've got a 64-bit CentOS 5 setup and I'm trying to run startx, but when I do I get:
I tried changing the display driver to i810 in xorg.conf but it can't find that module either.
View 12 Replies
View Related
Apr 6, 2011
in order to using the SR-IOV, according the guide HOW_SRIOV [Moderator edit: fixed link.]but i can't got the VFs.so i try to compile the driver :igb-2.4.13 and igbvf1.0.7.but i failed to install them.when i make install the igb-2.4.13 i got the errormsg:root@localhost src]# make installakefile:106: *** Linux kernel source not configured - missing version header file‚[root@localhost src]# i alreadly installed the kernel-headers-2.6.18-194.32.1.el5.x86_64.rpm .some system info maybe needed:Information for general problems.
== BEGIN uname -rmi ==
2.6.18-164.el5 x86_64 x86_64
== END uname -rmi ==
[code]....
View 6 Replies
View Related
Jan 20, 2011
The situation: computer based on Asus P6T motherboard. Two RAIDS:
- 'boot', on motherboard built-in RAID controller (CentOS 5.5 installed on this RAID)
- 'data' on 3dware RAID card
At one moment a CPU fan fails and the system halts. After the fan is replaced, BIOS informs it's reset and all the inner controller data are forgotten. After I switch it to 'RAID' mode, it remembers it was a mirror raid (RAID 1) installed, but the file system on it is completely trashed.
The 'data' RAID run by external controller isn't affected by the system failure. Three questions:
- is it worth trying to install OS on the rebuilt 'boot' RAID once again? Looks like if BIOS settings are lost for some reason, there's chance of completely losing RAID data
- has someone encountered similar problem with built-in RAID nd was it possible to recover data?
- will the software RAID be worth creating instead of using hardware RAID to replace the 'boot' drive?
View 2 Replies
View Related
Jan 11, 2011
I had a problem with my laptop which is dell studio 1569 wireless card is as shown above intel centrino advanced n-6200. I had ubuntu before and it worked very well but with centos and oracle enterprise linux (not unbreakable) it does not work at all? And also the graphics card not fully configured I knew that when I tried an opengl apps?
View 3 Replies
View Related
May 11, 2011
Unfortunately I've had no luck with using the default intel driver. It's strange really, you can see the gnome screen for a split second then it turns the display off like it's activating the external monitor or something. If I change the driver to vesa everything is fine.
Here is my info.
2.6.18-194.el5 i686 i386
kernel-2.6.18-194.el5
centos-release-5-5.el5.centos
00:02.0 "VGA compatible controller" "Intel Corporation" "Mobile 4 Series Chipset Integrated Graphics Controller" -r09 "Acer Incorporated [ALI]" "Unknown device 048a"
00:02.1 "Display controller" "Intel Corporation" "Mobile 4 Series Chipset Integrated Graphics Controller" -r09 "Acer Incorporated [ALI]" "Unknown device 048a"
00:02.0 0300: 8086:2a42 (rev 09)
00:02.1 0380: 8086:2a43 (rev 09)
View 4 Replies
View Related
Jul 27, 2009
Currently I am attempting to install Centos 5.2 64bit onto a Supermicro X7DCL-3 motherboard based machine. The Raid recognizes the HDD that's been installed into it, however, the drivers for the raid are not included in the install. After contacting Supermicro I've been supplied with a driver package that should fix the problem.[URL]However, I am still having trouble using the package in order to find the HDD (The only HDD in the machine) that is on the raid.I think I'm doing something that's should be fairly simple, but am screwing it up pretty bad.
View 1 Replies
View Related
May 31, 2009
Wireless networking doesn't seem to work. When I try to create a new network interface with system-config-network, my wireless card doesn't show up. The following comes from dmesg:
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
[Code]...
I saw a post about this elsewhere and downloaded some firmware drives from [URL] and installed then. But, I'm really out of my league when it comes to this kind of stuff.
View 2 Replies
View Related
Aug 10, 2009
Perhaps someone has run across this problem I loaded CentOS 5.3 on an AOpen MP45-BDR workstation. It uses the Mobile Intel 4 Series Express Chipset for the video graphics. It is officially identified as: GM45 chipset (Intel GMA X4500 MHD).
There are two problems. Using the "intel" video driver, the X11 server does not appear to support digital video cable (DVI interface). It is also stuck in 1024x768 resolution and I want it to display in 1280x1024 resolution. Using a DVI cable, the system boots and displays properly (GRUB and boot messages) until the X11 server starts, then the signal is lost. The system is configured with a dual boot (Windows XP Pro) and Windows operates properly and supports all of the features of the video graphics chipset (DVI and full resolution). So the hardware is ok.
The "intel" video driver has a description of "Experimental ..." so maybe there is an update to this driver or a replacement driver that supports this chipset. I checked the buglist and found CentOS bug ID 2951 which is somewhat similar. The user was utilizing the "intel" video driver and it locked his system but changing the driver to i810 was a work-around. My system does not lock. I did try the i810 video driver but the X server did not like it - it would not start. This makes sense since the description of this driver specifies support for the older Intel onboard chipsets.
[Code]...
View 1 Replies
View Related
Sep 13, 2010
I've installed from the CD the Centos version 5.5. When I try to connect to Internet I can't because I received some errors. I've the Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller also a wireless slot (I've the wireless card DWL-G650+) When I turn on the pc and I go to "Ethernet Device", I see set: peth0 (Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) ETHERNET CONTROLLER) and also set "Bind to MAC address": fe:ff:ff:ff:ff:ff I've set manually the IP address (I'm under router). Status is "Active" but can't go on the Net. When I change to "eth0 (Intel EtherExpress/100 driver)...sometimes become "Active" an other times said that the MAC address is different or to check the cable because can't find the IP. What can I do?
View 5 Replies
View Related
Feb 13, 2010
Short story: Correct driver for 10.1 for the raid on the Intel S3000AH board?
Long story: This system crashed due (I think) to a bad memory module, had been running fine for 2 years, had been an upgrade from Suse9. The hardware is fixed but I get "GRUB" repeating on the screen when booting and that is all. I can't seem to find opensuse drivers for 10.1 (that is what I believe is on the system, I believe the data is still intact and don't want to compromise it if possible) It will not load the 10.1 drivers from the intel site, presumably (?) because they are for SLES, not opensuse. I can boot from a 9.3 CD with the drivers from the intel site, and can see the original partitions.
View 1 Replies
View Related
Jul 10, 2009
I have an intel DP35DP motherboard - ICH9 southbridge - set to AHCI mode. Working fine under 5.2. Yesterday I updated to centos 5.3, and got kernel 2.6.18-128.1.16 and now it can't boot. It hangs trying to read sata1 with DRDY errors and exceptions.So then I installed 5.3 from a DVD onto a new drive, and got kernel 2.6.18-128. This worked, most of the time, but occasionally gave me this error. I then updated my BIOS, and the error went away.Then I updated this new working drive to the latest kernel (yum update again) and got kernel 2.6.18-128.1.16, and now it wont boot again, with the same message.
ata1: failed to read log page 10h (errno=-5)
ata1.00 exception Emask 0x1 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: cmd 60/08:00:61:4b:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
ata1.00: status: { DRDY }
ata1.00: revalidation failed (errno=-2)
ata1.00: revalidation failed (errno=-2)
[Code]....
View 2 Replies
View Related
Feb 15, 2009
The installer can't see my raid controller (I assume) as I'm getting the following error:"Error opening /dev/mapper/isw_jbhgjgjj_Vol0: No such device or address"It just sees them as 4 individual drives: sda, sdb, sdc and sdd.Please note that I have set up the RAID 5 in the controller bios interface and the image name is Vol0, which it seems that it tries to load but for some particular reason it can't.I have also tried different bios settings and nothing worked.
View 3 Replies
View Related
Jan 13, 2010
My problem is that I'm trying to install CentOS 5.4 x86_64 DVD ISO on Supermicro X7SBI server with installed Adaptec RAID 3405 controller.
I created RAID 5 array and is working fine (adaptec status says Optimal) but I can't install CentOS to that array (1.5TB size).
Whenever I try to install with: linux dd
I'm asked for a driver, which I have downloaded from Adaptec site and extracted contents to USB drive (in installation found as /sba1) which has now a lot of IMG and some ISO files on it.
I try to load (I simplified names) RHEL5.img, CENTOS.img... with x64 names (one exact name: aacraid driverdisk-CentOS-x86_64.img) and I always get the error message: "No devices of the appropriate type were found on this driver disk"
This is going on for a week now and I can't find the right driver or something I'm doing wrong to get install done.
View 16 Replies
View Related
Mar 18, 2009
I installed centos 5.1 in my system, it installed perfectly, but when I am trying to install centos 5.2 then it is not let me install.
My system has 220 SATA HardDisk Intel Core 2 Duo 4 GB RAM Intel Desktop Board DG41TY when I try to install centos 5.2, it show me menu bar After hit enter key to install centos 5.2, it show me loading usb drive and then showing some strange font. System is hang after this Can you please tell how I install centos 5.2
View 5 Replies
View Related
Apr 8, 2010
i want to change my server to a intel d510mo withoutchanging the installation.The old nstallation runs on a centos 5.4 asus amd board witha sata raid, sata-sil adapter in no raid modus.and that is the problem.i boot the centos on the intel board, and only the sata-sil module is loaded, so noata drive is found.How can i change this? udev? i disabled the scsi-hostadapter in modprobe.conf, but no
View 1 Replies
View Related
May 7, 2009
I need your help urgently. I will shortly install Centos 5 on a HP DL380R05 E5420 Server with two HP 146GB 10k 2.5 SAS HP SP hard disks running hardware RAID-1. I am a newbie on CentOS, please advise me:
1. Do I need a Centos RAID device driver for hardware RAID-1 on the HP DL380R05 E5420 Server?
2. Should I use Centos i386 or Centos x86_64 in this case? Which one: CentOS 5.2 or CentOS 5.3?
3. Does Centos support Embedded NC373i Multifunction Gigabit network cards?
The following is my server's hardware configuration:
HP DL380R05 E5420 2GB Base AP Server(1) Quad-Core Intel Xeon Processor E5420 Two Embedded NC373i Multifunction Gigabit / 2 GB (2 x 1 GB) PC2-5300 Fully Buffered DIMMs (DDR2-667)/HP Smart Array P400/256MB Controller /Rack (2U)/Hot Plug Fully Redundant Fans Standard Two HP 146GB 10k 2.5 SAS HP SP HDD HP 1000W IEC C14 Cord RPS Kit
View 19 Replies
View Related
Oct 16, 2010
I'm setting up a raid 5 on several hard disks with a layer of lvm on top for good measure.I know the recent kernels support growing software raid, but since centos runs 2.6.18, I wanted to make sure it'll work. Does the centos kernel support growing raid devices?
View 1 Replies
View Related
Jan 12, 2009
Installing new Intel server S5000VSA (Sapello) motherboard with RAID 1. Downloaded F10 32 bit DVD and run install. Everything works fine and select Samba and all that. Install completes but on reboot get a blank screen.
I know with Windows one has to load the RAID driver off the Intel driver CD, so guess that is the problem. But how do I do this in Fedora? Question: How do I get to select the Intel RAID driver in the install process? There does not seem to be any place to stop and make this selection. I tried selecting the Red Hat and Suze installs on the Intel configuration assistant but it then reboots and that is it. In Windows it would ask to insert the Intel driver CD but that does not happen. So I am stuck. I loaded Fedora some 3 year ago and like it but then it was not on a RAID setup. I created a VMWare install on my desktop and did the same install options and it works. So the DVD seems fine.
View 3 Replies
View Related
Jul 14, 2011
I got a crash on intel machine running intel cpu (CENTOS 5)I would like to know if i can move hdd to new machine with amd cpu? 3 hdd (raid 0 on 2 of them)system is on hdd without raid.
View 1 Replies
View Related
May 10, 2011
I have DELL R310 server with PERC 200H controller and RAID 5 configured already.This is my first time I want to install CentOS and seems like a new challenge for me I've read some articles on Wiki and posts on this forum and didn't find any information how to install CentOS on RAID 5.I only noticed that if there is fake or software RAID1 it should be switched off and made by OS configuration.I think PERC 200H is separate controller so RAID 5 is hardware RAID, is there anybody who can confirm ?My problem is that when I try to install CentOS it doesn't see any hard disks ... I looked for drivers on DELL web site and there is driver for Red Hat 6. I tried to install it using linux dd command but it doesn't recognize. Is there anybody else who met such problem ?
View 3 Replies
View Related
Aug 3, 2010
I am trying to connect a RAID Box to the server via LSI 8880EM2 RAID controller.The raid box is FUjitsu Externus DX60 with raid 1 configured.The server is Fujitsu Primergy SX300 S5 with LSI 8880EM2 RAID card.The external raid box is being recognised by the raid controllers bios.
The server runs CentOS 5.5 64bit. I have installed the megaraid_sas driver from LSI website and MegaCLI utility but CentOS still fails to see the box.MegaCLI utility, when launched from CentOS, recognises the raid box, CentOS does not(no mapping being created in /dev).
I have also tried to create a logical RAID0 HDD on one physical HDD(as seen by MegaCLI) with MegaCLI utility in CentOS.The result was success and the new logical drive could have been used, but when restarting the server, the controllers' bios fails with an error (not surprised(one logical RAID0 on one physical HDD)) and configuration is being erased.
Has anyone tried connecting 8880EM2 controller to a raid box with raid configured on the box, running it all under CentOS and what were the results.
View 3 Replies
View Related
Dec 10, 2009
I am going to be using CentOs 5.4 for a home storage server. It will be RAID6 on 6 x 1TB drives. I plan on using an external enclosure which is connected via two SFF-8088 cables (4 drives a piece). I am looking to try and find a non-RAID HBA which would support this external enclosure and allow to use standard linux software raid.
If this is not an option, I'd consider using a hardware based raid card, but they are very expensive. The Adaptec 5085 is one option but is almost $800. If that is what I need for this thing to be solid then that is fine, I will spend the money but I am thinking that software raid may be the way to go.
View 3 Replies
View Related
Apr 28, 2009
I've just setup a new centos 5.3 server with a 3-disc raid 5 software RAID array. I've setup other software raid 5 arrays on this same hardware, whilst testing, and had no trouble... I only just installed 3 new drives and performed a new install from scratch.
Hardware is: 4800XP X2 64-bit, 2GB RAM, Albatron KI-690G mainboard with Marvel SATA controller (I think) - 4 ports.
SATA port 0 is system drive (OCZ vertex 32GB SSD)
SATA port 1 is Western Digital "green" 1TB 8MB cache SATA 2
SATA port 2 is Western Digital "green" 1TB 8MB cache SATA 2
SATA port 3 is Western Digital "green" 1TB 8MB cache SATA 2
Ports 1-3 in software raid MD0 (raid 5)
All of this was configured in the GUI setup, with LVM on top of software RAID 5 mounted on /var. Partition size is ~1.9TB
Trouble is I get all sorts of "hardware failure" messages at bootup and the MD driver reports it was only able to bring up 2 out of 3 drives in the RAID set... however the RAID set formatted fine during the setup?
Here is the relevent dmesg output...
View 2 Replies
View Related
Jun 15, 2011
I tried to installed Centos5.4 version on Dell PC intel corei3 inspiron580s and succeeded but found some issues following below
1 Hardware issue for LAN driver ( Broadcomlink(TM)gigabit ethernet)
2 Display Driver not support and also missing Xorg.config file (i.e ., My Screen Starts from center of screen )
3. What is minimum configuration for centos 5.4 ?
View 2 Replies
View Related
Oct 1, 2010
I have recently installed Ubuntu 10.04.1 lts server on my Intel "fakeraid" (software raid) (2x250 sata).To test my RAID 1 I turned off one HD and start the system.The first screen (Intel software screen) show Status = Degraded, but the system starts normally with just one HD.Then I turned off the system and turned on the HD again, so the first screen (Intel software screen) shows Status = Rebuild. If I enter in the software raid panel the folowing message is showed: "Volumes with "Rebuild" status will be rebuilt within the operating system"The system starts normally... but this message status stays permanently even I restart the system again
View 9 Replies
View Related
Dec 7, 2010
I'm working on a server and noticed that the to RAID5 setup is showing 4 Raid devices but only 3 Total devices. It's on a fully updated CentOS 5 system that only has three SATA drives, as it can not hold anymore. I've done some researching but am unable to remove the fourth device, which is listed as removed. The full output of `mdadm -D /dev/md2` can be see below. I've never run into this situation before.Anyone have any pointers on how I can reduced the Raid Devices from 4 to 3? I have tried
mdadm /dev/md2 -r failed
mdadm /dev/md2 -r detached
but neither work and since there is no block device listed I'm not quite sure how to get things back in sync so it's only seeing the three drives.
/dev/md2:
Version : 0.90
Creation Time : Tue May 25 11:07:04 2010
Raid Level : raid5
[code]....
View 8 Replies
View Related
Feb 17, 2010
I am attempting to load CentOS 5 on an Acer 6900 desktop and I'm not even getting out of the starting gate. I am familiar with using linux but not the install procedure which is why I am beginning to dive into this. However, when I bring the system up off the Linux boot disk and go to install it's not even giving me the option of the controller so I can begin installing the os from the dvd-rom. This is what acer lists as the controller for the 6900: ich8 serial ata storage controller 2820 linux driver. I cannot find this driver for linux anywhere.
View 10 Replies
View Related
Feb 20, 2010
I have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.
Using these instructions....
[url]
When I make the WLAN driver, I get this:
View 2 Replies
View Related
