CentOS 5 Networking :: How To Configure VPN On CentOS 5.4 X86_64
Dec 29, 2009
I am brand new to this forum! I have spent some time on other Linux forums but based on my usage of CentOS I figured that it would be best to come straight to the pros. I've been using CentOS for a while now, mostly as a web server. Actually I use it as the base and installed Parallels Plesk Control Panel.
Anyway I want to setup a VPN and so far I haven't found any real solid documentation on how to do that! Yes I could install DAG/RPM Forge but what I really want to know how to do it from scratch. What I mean by scratch is that I want to download the tar.gz package from openvpn.net and then build it as required. I don't know much about building or compiling a package so that is why I have come here for help! I am guessing that I need to compile openVPN with openSSL and probably a few other packages... I could use openSWAN but I don't want to.
View 6 Replies
ADVERTISEMENT
Feb 9, 2011
I am in the process of building a new server on an Asus P5QPL-AM motherboard and an Intel E8600 processor.explain to me the difference between the two versions and what would you recommend.Also, is there any advantage of SATA over IDE hard drives?
View 1 Replies
View Related
Oct 30, 2009
I've got two USB webcams I'm trying to get running with CentOS 5.4 x86_64. I've downloaded and installed the gspca driver from http://mxhaard.free.fr/spca5xx.html. Running lsusb yields:
Bus 002 Device 003: ID 0ac8:307b Z-Star Microelectronics Corp. USB 1.1 Webcam
Bus 002 Device 002: ID 0ac8:307b Z-Star Microelectronics Corp. USB 1.1 Webcam
View 9 Replies
View Related
Jan 13, 2010
My problem is that I'm trying to install CentOS 5.4 x86_64 DVD ISO on Supermicro X7SBI server with installed Adaptec RAID 3405 controller.
I created RAID 5 array and is working fine (adaptec status says Optimal) but I can't install CentOS to that array (1.5TB size).
Whenever I try to install with: linux dd
I'm asked for a driver, which I have downloaded from Adaptec site and extracted contents to USB drive (in installation found as /sba1) which has now a lot of IMG and some ISO files on it.
I try to load (I simplified names) RHEL5.img, CENTOS.img... with x64 names (one exact name: aacraid driverdisk-CentOS-x86_64.img) and I always get the error message: "No devices of the appropriate type were found on this driver disk"
This is going on for a week now and I can't find the right driver or something I'm doing wrong to get install done.
View 16 Replies
View Related
Oct 21, 2009
This is my first post, I hope I'm the the right place. I installed mysql mysql-server php-mysql perl-DBD-mysql libdbi-dbd-mysql via "yum install -y" on a server running CentOS 5.3 X86_64 The install completes successful with no errors, but once I start mysqld via "chkconfig --level 35 mysqld on" ; "service mysqld start" There are no errors in /var/log/mysqld.log netstat shows mysqld listening on 3306 and localhost is in /etc/hosts
[Code]...
View 2 Replies
View Related
Nov 6, 2010
I have an i5 Thinkpad running Windows 7 64-bit. VT is enabled in the BIOS. I have installed vmware server v 2.0.2 but am unable to install Centos 5.5 x86_64 as a guest OS. The steps that I followed are as follows:1. Created a new VM, specifying RHEL 5 64-bit as the intended guest OS (per vmware documentation - Centos is not available as a selection2. Downloaded all 8 iso files for Centos v5.5 64-bit3. Modified the CD/DVD drive to 'connect at power' and use an iso with the path pointing to the x86_64 iso 1 of 8When I power up the VM, the console window displays 'ISOLINUX 3.11 2005-09-02 Copyright (C) 1994-2005 H. Peter Anvin' and nothing else. The installation splash screen never appears. As a test, I downloaded the first of 7 iso files for the 32-bit version of Centos 5.5 and pointed the CD/DVD drive to that iso. In that case, the installation starts as expected. I would really like to get the 64-bit version installed and running.
View 3 Replies
View Related
Aug 18, 2009
I'm trying to get a Digi Edgeport/8 working under x86_64 CentOS 5.3. This is a USB to serial conversion box that takes a single USB port and breaks it out into 8 DB-9 serial ports. We're running the 2.6.18-128.el5 x86_64.
This box has worked fine on many systems for us from RedHat 7.3 to Fedora Core 5 from everything back to the 2.4.20 kernel up to 2.6.16.16. On the CentOS box, in /boot/config-2.6.18-125.elf, the following is set:
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
Which is all we've ever had to do in the past and plugging the box in to the system, it will auto-configure.
what I need to do to get this working in the CentOS 5.3 64-bit world??? Time is critical for this to get fixed!
View 3 Replies
View Related
Jul 4, 2010
i like to use my DVB-C Card KNC-One on Centos 5.5 x86_64. But i cant get it to work. on a 32 Bit Centos this is working like a charm. I tryed several different kernels together with the video4linux-kmdl
At the moment i am using this kernel: 2.6.18-194.3.1.el5.centos.plus
[Code]....
View 8 Replies
View Related
Mar 1, 2010
On my 64 bit Cent OS 5.4 servers/workstations, my Passive Mode FTP iptables rules constantly stop working. If I do a lsmod | grep -i ip_conntrack_ftp
View 3 Replies
View Related
Nov 28, 2010
In the system-config-display the system sees the video card but when you look in the Configuration tab it is running on the vesa - generic driver.I downloaded the latest driver from ATI for x86_64 Linux and after I ran it there was an error that it could not find X-server:
[root@coopers ATI-4770]# chmod +x ati-driver-installer-10-5-x86.x86_64.run
[root@coopers ATI-4770]# ./ati-driver-installer-10-5-x86.x86_64.run
Created directory fglrx-install.ob5679
[code]....
View 16 Replies
View Related
Feb 24, 2009
I'm struggling to get up an wireless card (EDIMAX PCI adapter based on Ralink RT2561/RT61 802.11g chipset). So far, so good, I manage to install ralink drivers:
# lsmod | grep rt61
rt61 220296 0
# iwconfig
lo no wireless extensions.
wlan0 RT61 Wireless ESSID:"DiamondAccess" Nickname:"localhost.localdomain"
Mode:Managed Frequency:2.412 GHz Bit Rate=54 Mb/s
[Code]...
View 2 Replies
View Related
Aug 31, 2009
I have downloaded all files from [URL]... and burnt a DVD. How can I now install centOS 5.3 on my server/computer ?
View 4 Replies
View Related
Aug 10, 2010
How do I know what sound system my Centos 5.5 install is using and how would I configure which soundcard output to use? I want to use the digital coax output from my M-Audio PCI soundcard, which appears to be detected and loaded. When I launch MPD, it autodetects an alsa sound system, but programs like alsamixer don't exist and I can't hear any sound out of the digital coax output. I haven't checked the 3.5mm stereo out yet.A little confused as to which documentation to be looking at at this point.
View 9 Replies
View Related
Nov 30, 2009
I HAD TRIED AND COMPLETED CONFIGURING DHCP THROUGH dhcpd.conf file and now i am stucked at configuring DNS .. how to configure DNS on CENTOS.
View 2 Replies
View Related
May 28, 2010
Today, I try to update firefox by Package Updater but show error by bellow. "Missing Dependency: xulrunner >= 1.9.0.19-1 is needed by package firefox-3.0.19-1.el5.centos.x86_64 (CentOS5updates)"
View 6 Replies
View Related
Aug 3, 2010
Attempting to compile an application that is not located in any of the repos yet for 11.3 64 bit. I have downloaded the appropriate src and untarred it. However, when I attempt to run the ./configure command here is the error I receive. checking build system type... Invalid configuration `x86_64-unknown-linux-': machine `x86_64-unknown-linux' not recognized configure: error: /bin/sh ./config.sub x86_64-unknown-linux- failed
I have made sure that I have all kernel-headers packages installed and am unsure as how to proceed. I tried using the command "./configure --build=x86_64" and then receive an error stating that the "SYSTEM IS NOT SUPPORTED" and continued errors stating that gcc is not installed, eve though it is.
View 5 Replies
View Related
Feb 9, 2010
how to configure DHCP server on centos linux and how to configure FTP server on centos linux
View 2 Replies
View Related
Oct 18, 2009
how to configure my network for web traffic.Here is my setup:I have the following virtual machines, (all guest are running on CentOS 5.3);
firewall: Smoothwall 3.0, (hardware, not virtual)
guest # 1: Apache http server
guest # 2: Qmail server
guest # 3: Proftp server
I want all of these services on different machines for security reasons, (mainly the ftp server) how do I route the traffic from the firewall to the different machines? I have been looking at setting up a reverse proxy, however, everything that I have read says that a reverse proxy will not handle the smtp/pop3 traffic. Can I just use a DNS server to route the traffic?
View 5 Replies
View Related
Jan 24, 2010
I'm stuck at server with OpenNA installed, which has no relation with CentOS but If anyone knows GIPTABLES firewall to point me somewhere I can get configuring.I need to open 2 custom ports but I just can't get it to work.
View 2 Replies
View Related
Jun 17, 2010
i want to install and configure vpn server on centos 5.5 final i want to work it like that my server is in other city or country, i want to connect it in other city or country and want to use remote server internet on my computer.
View 1 Replies
View Related
Feb 24, 2011
I have centos with software firewall enable , but i want to set up hardware firewall can anybody guide how to install and configure hardware firewall in centos
View 3 Replies
View Related
Oct 14, 2010
in my office we are using cyberoam firewall to manage entire network , in that lot of option is there even we can configure pptp,ipecac vpn also using cyberoam.totally cyberoam acts as a server, how can i configure ppptp vpn in centos 5 as client of the cyberoam, then only i can access the office network from my home.
View 3 Replies
View Related
Apr 12, 2009
i'm looking for any documents or video tutorial for How to Start VPN SERVER on Cent os 5, i'm going to make VPN accounts and set monthly bandwidth on each ,on my Server and let to client's to connect to server via VPN Connetion, such as [URL]...
View 1 Replies
View Related
May 26, 2009
While communicating with cpanel , they said they don't support on any NAT router based network. To host website with cpanel internet should be connected directly with modem (no router) I have a dell poweredge server and recently brought PCI modem. I have 8 IP static addresses from my ISP. cpanel as they said that they don't support networking.
View 3 Replies
View Related
Oct 20, 2009
I just installed CentOS and I am trying to configure the network card on the IBM Thinkpad laptop. According to this doc about wireless setup (http://wiki.centos.org/HowTos/Laptops/Wireless), I tried to load the ath5k module but I get "ath5k not found". Maybe I'm doing something wrong?
# modprobe ath5k
FATAL: Module ath5k not found
# uname -rmi
[code]....
View 6 Replies
View Related
Dec 21, 2009
In /etc/xinetd you see a file by the name of gssftp
Is vsftpd replaced by gssftpd
I want to configure gssftp to allow anonymous logins can anybody tell me where is the conf file for gssftp
View 1 Replies
View Related
Mar 31, 2010
I am trying to configure a BIND DNS server to handle three websites on my home network, (my site, my sons site and our test site). Since my ISP uses dynamic DNS, we are using DNS2GO to redirect our traffic, 9EACH SERVER HAS IT'S OWN VERSION OF dns2go running).My problem is that I can't figure out how to configure BIND since I don't have a static IP to enter into the named.conf or reslov.conf configuration files.
View 7 Replies
View Related
Oct 30, 2010
I have a desktop and a laptop. I have Netgear WGR614v9 Wireless Router connected to my desktop. Since my Laptop is pretty old I also bought a Netger Wireless Adapter for the sme model. Now when I connect the Wireless Adapter I am unable to connect to Wi-fi. I am new to Linux, after googling I ran "lsusb" command and it showed Netgear Wireless adapter and its version. Also in GUI when I open File Browser it also shows the Adapter detected but I am unable to connet the same to my router. Also the blue light on the adapter is not glowing.
View 6 Replies
View Related
Jan 21, 2011
I am running a centOS 5.5 server and can't synchronize with time servers via ntpd. My server sits behind a firewall with only port 80 open and I suspect this is the issue. Do I need to open other ports to connect to the time servers at [URL]?
View 4 Replies
View Related
Aug 23, 2010
I'm new to CentOS and has recently use it.
I'm looking for a way to configure DHCP client so it would dynamically set the hostname and register itself to a DNS server. I don't have access to the DNS server.
View 6 Replies
View Related
