Ubuntu Multimedia :: How To Remove Alsa-driver Install
May 3, 2010
what I did was searched a solution on google and i read something about install alsa-driver. So I downloaded it and tried to install it (took a very long time) and didn't installed (errormsg). When I looked a little further i saw my microphone was muted in the audio settings (DOH !)but now everytime i do an apt-get i get this error message from alsa-driver that want to setup
Quote:
sudo apt-get install gcc
Reading package lists... Done
Building dependency tree
Reading state information... Done
Whenever I try to run a windows game under Wine I get an error that depict I have no proper sound driver. I checked the wine config and there was only OSS option that I think it would not help me to get sound working. I think I have to use Alsa Instead but I don't know how to add Alsa support to wine. By the way in need DirectSound as well. should i download it myself and add it to system32 or there is a better way?
I am attempting to install the Linuxant ALSA driver to make my sound work properly (speakers muting when headphones plugged in). This worked on Lucid, but on Maverick the installation fails at the "building modules" stage. It directs me to a logfile, which I have reproduced here:
The package partially installed I have no sound at all. I have kernel headers and every related -dev package I can think of installed. I'm running 64-bit; could that be an issue?
I don't have any sound after installing Linuxant ALSA driver. I tried uninstalling it and the hsf driver, didn't help. Reinstalling ALSA didn't help either. Ubuntu doesn't detect my sound card, and aplay doesn't detect my sound card. lspci -v output for sound card:
Code:
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1) Subsystem: Acer Incorporated [ALI] Device 0126 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10
I have also posted this as a question in ubuntu launchpad but I figure I have more of a chance coming across a solution this way- as I had been struggling with no sound issue (and other issues for so long now!) I first had alsa driver version that came with this 2.6.32-25 preempt kernel: ALSA driver 1.0.22, I believe. My maudio soundcard was detected but I couldn't get sound so I found a suggestion in ubuntu forum to install lucid backports. This created 2.6.32-25 generic kernel which I didn't want since I need low latency (and still had no sound). I tried at first to compile and install Alsa driver 1.0.23 (following Ubuntu Sound Troubleshooting Guide), having booted into the preempt kernel- but ALSA driver 1.0.23 only installed into the generic backport kernel. So I proceeded to remove the 2.6.32-25 backport generic kernel via synaptic.
I once again only have my original preempt kernel 2.6.32.25 and 2.6.32.21 in my grub list. I discovered that I had no soundcard detected and no more ALSA installed, according to 'aplay -l' & 'cat /proc/asound/version' 'cat: /proc/asound/version: No such file or directory' so I proceeded to try to install Alsa driver 1.0.23 twice more but each time I get:
'bash alsa-info.sh --stdout cat: /proc/asound/version: No such file or directory grep: /proc/asound/cards: No such file or directory cat: /proc/asound/cards: No such file or directory cat: /proc/asound/modules: No such file or directory
Can do nothing with the PC. New install of 10.04 and was prompted to install Nvidia driver. Did so. Rebooted, now have nothing except a thin line at top of screen. How can I remove this driver when I see nothing?
I had normal sound... i did try to install alsa-driver-linxant which didnt succeed, and now i dont have any sound... i can see a red cross near my volume icon.
here's some output:
upload=true&script=true&cardinfo= !!################################ !!ALSA Information Script v 0.4.59 !!################################
I have recently been forced to do a hardware upgrade (my previous mobo died). Now, sounds works ok with,amarok because kde has recognized the new hardware and switched to it.
..... does not work, likely because flash uses alsa-oss which is probably not configured automatically. I have tried uninstalling and reinstalling both alsa-oss and flash, but it didn't solve the problem.
Having had many problems with pulseaudio on a fresh karmic install, I followed some recommended instructions for removing pulse and using alsa (URL...). unfortunately, both pulse and alsa have gone and i'm left with oss which seems to work fine. I'd like to have alsa back though.When I open amarok, it plays the frst song on the playlist then pops up a series of 'could not initialise sound engine' messages, and crashes.
I installed ATI 10.7 driver successfully but its not up to my expectations, e.g VLC not working right (video stutters, etc). And I want to revert back to the default radeon which was a lot better until the ATI 10.8 driver comes out.
By the way, what is this in my /usr/share/ati/fglrx-install? code...
I'm trying to remove 3Dlabs / Oxygen gmx , and install vesa - Generic VESA-compliant video driver module.How do I remove 3Dlabs / Oxygen gmx ?I can click on VESA in the 'Choose By Name...' , but when I close that box, it shows No Driver.
I can not work with pulse. I have removed it but have failed to install ALSA in its place because the instructions I have are out of date. Could someone point me to alsa installation instructions that work with 10.10.
Main desktop upgrade no problem. Laptop upgrade no problem. With my Media machine I had a problem the the ATI build-in graphics hardware. During install it did not ask to remove the ATI driver. no graphical UI. Since all the data where backed up anyway and the original install lacked some partitioning, I did a fresh install. Had some problems with sound, which I could fix via the KDE multimedia "phonon".
I find that I can't compile alsa-driver 1.0.24 OR 1.0.23 under Fedora 14.
Compiling alsa-driver 1.0.24 fails with: make[1]: Entering directory `/usr/src/kernels/2.6.35.11-83.fc14.x86_64' CC [M] /home/Extra/Emerg/Download/alsa-driver-1.0.24/acore/hrtimer.o In file included from /home/Extra/Emerg/Download/alsa-driver-1.0.24/acore/hrtimer.c:1:0:
I have a Realtek ALC262 sound card, using the ALSA-1.0.20 driver， when I load the driver module manually using the command "modprobe snd-hda-intel model=basic", the card can work correctly, but I do not know how to modify the config file "modules.conf" or others to add the model type, so that the driver module can be load automaticly when the computer is startup, anyone knows that?
I'm trying to update ALSA, following the instructions here: SDB:Alsa-update - openSUSE.I'm not sure how to proceed at STEP THREE. There are two sets of instructions, based on whether or not the kernel has been updated. I'm not sure if it has been. How can I make sure?
How To: Uninstall/Remove Old Wireless Driver to make way for New Driver (RTL8191SE)?
Here's the new driver:
I have been having trouble with my wireless connection intermittently disconnecting and reconnecting repeatedly (sometimes every couple of seconds). I posted a thread about this here on Ubuntu Forums titled: Ubuntu 10.45 & NetworkManager Applet 8.0: Connects & Disconnects Frequently.
My Compaq Presario F700 laptop has Conexant HD-Audio SmartAudio 221 (checking from my Windows partition). I had everything working just fine until yesterday when I attempted to manually install an alsa-linux package that I downloaded sometime ago. Although the .deb package failed to install, it seems it messed things up and now there's no sound. The speaker icon shows "All mute" and I have no clue how to fix this. How do I 'unmute' it?
I have a TV tuner card with its output connected to the CD in of an integrated sound card. Video is OK, and the sound also gets thorough (to the line out) when running xawtv, for example. However, I found no ways yet for recording it.I'm running Ubuntu 10.10 with ALSA drivers. Pulseaudio was running in the beginning, now it doesn't, but it doesn't seem to make much difference.
capturing with VLC, using plughw:0,0 as the audio capture device. (Result: no sound track at all in the resulting video.)arecord, then aplay.alsamixer. The capture source is set to "CD" (and on the input side it's also "CD" where I can effectively modify the volume for audio going through...), but still no result.
I've installed both fluidsynth and qsynth, but get this error everytime I run qsynth. I'm trying to use my m-audio keyrig 49 just to practice playing the piano. I don't really care about having a whole DAW and whatever, I just want to play my keyboard. Maybe there is a better way than qsynth? Also, this happens:
Code: /etc/rc.d/rc.alsa restart Loading ALSA mixer settings: /usr/sbin/alsactl restore No state is present for card K49 [code]....
I don't know that it has to do with my qsynth problem or not. I just thought I'd throw it in just in case it does. Also, xmms recognizes my keyboard in the alsa preferences, where the mixer device is.
Months ago, I tried to get my notebook's internal modem working, by installing alsa-driver-linuxant-1.0.23.1-1.noarch.rpm and hsfmodem-7.80.02.06x86_64full-1.x86_64.rpm, both from Linuxant. This did not work, but my system was stable and the sound device (Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)) worked fine.In the last few days, I upgraded to the latest kernel 2.6.35.12-88.fc14.x86_64. Boot failed due to an inability to build the alsa-driver-linuxant against the kernel source (I have the kernel source in /usr/src/kernels/2.6.35.12-88.fc14.x86_64/). The message in boot.log was:
Code: ERROR: Build failed. Please review the build log at /var/run/alsa-driver.1367.log. /var/run/alsa-driver.1367.log contains the error:
I downloaded my Proprietary ATI Linux Driver (for my Radeon Xpress 200) from [URL]... But I cannot figure out how to install it!I followed the instructions here but Terminal told me "command not found". I also tried double-clicking the file but it opened with gedit and gave me an error.
I have already downloaded and installed ati's catalyst for my ati mobility radeon 4570 (at least i think so, since there is the ATI catalyst control center in the system-> preferences menu). The problem is that i want to upgrade its version from 10.9 to 10.10. and since i want to firstly uninstall the previous version,I get this:
Code: alexandros@alexandros-laptop:/usr/share/ati$ sh ./fglrx-uninstall.sh sh: Can't open ./fglrx-uninstall.sh The uninstall.sh doesn't exist.
I'm running a slightly upgraded Dell Inspiron B120 with 2 Gig RAM, 200 Gig HD. I recently switched this laptop from XP to Ubuntu 9.10. After many a long hour, I was able to get World of Warcraft running under wine but its slow to the point of being unplayable. I was used to slow gameplay on this laptop under XP, but 0 fps is a new low. Dalaran (the notoriously laggiest place in the game) is a joke. There's a 5-10 sec lag between hitting the button to move and actually going anywhere. I took all the video settings down to the minimum and did a regedit to add a key for wine.
Basically I tried all the tips and tricks I could find (including creating an xorg.conf file since I didn't have one). Nothing I did worked. I can be in the most remote, unpopulated spot in the game and I can't get more than 3fps. Somewhere I read that I should install a proprietary driver for my video card (intel GMA 900). So I went out and downloaded xf86-video-intel-2.10.0 and ran the configure script that came with it. It came back and said
Code: No package 'xorg-server' found No package 'xproto' found No package 'fontsproto' found so I went out and found Xorg-Server-1.7.1 and ran its configure script which gave me
Code: No package 'x11' found I tried setting $PKG_CONFIG_PATH to /etc/X11/ with no joy.
Now I am new to linux but in poking around the file system I did see /etc/X11/ which had some stuff in it. To me that says that I've got X11 installed but then again I've been using linux since breakfast so what do I know? What do I need to do to install a proprietary video driver -OR- what can I do to get the game running well enough to be playable (short of walking over to my windows desktop computer)?
I am attempting to make a video machine only... which mean I have a Compaq 6435cl and I have installed the latest verion of ubuntu on it. All I want this machine to do is play video from off the net on my LCD HD TV. The video on board was all choppy when going into full screen mode so I put in a 3dfx Voodoo card and the same thing happens. I cannot figure out how to install the drivers for this card in ubuntu so I was wondering if I should by a new video card. Do you have a recomended video card for ubuntu that would push HD video?
I've installed 10.04 netbook on an old Fujitsu Amilo L1300 laptop, with an Intel i845 graphic card. As I know, it would run just OK with the 2.11.0 drivers, but i have no idea how to install that. I've downloaded the driver, and every package written on the page: [URL] At first I couldn't even ./configure the install, but now the configuration runs smoothly. However I cannot finish the make part, because it gives an error.
Quote:
sentor@laptop:~/Documents/xf86-video-intel-2.11.0$ make make all-recursive make[1]: Entering directory `/home/sentor/Documents/xf86-video-intel-2.11.0' Making all in uxa
[Code].....
I've been working on it for four days now, and as much as I'd love to continue it, I've run out of time.
Or if there's a way to use the 2.12.0 driver, then could somebody tell me how?
I am running an ubuntu 10.10 with an Intel i3 on a Gigabyte motherboard. I use it mainly as an HTPC, so it is connected (via HDMI) to a Samsung LCD TV (LA40A450C1V). Do I need to install a specific display driver? if so - how do i do that?
I'm having issues installing the nvidia-96 driver package on the new Lubuntu 11.04. I have a GeForce4ti 4200 card and have had that driver package install successfuly on numerous flavors of Ubuntu over the years.
apt-get spits out the following error:
Code: The following packages have unmet dependencies: nvidia-96 : Depends: xorg-video-abi-8.0 but it is not installable Depends: xserver-xorg-core (>= 2:1.8.99.905-1ubuntu3) but it is not going to be installed Meanwhile, a check of the currently installed xserver-xorg-core through apt-cache shows:
[Code]...
The nouveau driver does work, but I would really like full 3d acceleration like I have had in the past.
