Networking :: Any Driver Available Supporting 802.11h?
Feb 6, 2010
I have a 802.11a-WLAN running. Due to regulatory restrictions, I am to do some dynamic frequency selection(DFS) on certain channels available in the 802.11a-band. This is called 802.11h. I am seraching for a solution reagarding 802.11h-functionality. I do know, there is a branch within madwifi called madwifi-dfs which was developed mainly by Bennoit Papillaut and Pavel Roskin.
The problem with this driver is, that it doesn't work reliable. If I simply start a network scan on my Lenovo-machine, the DFS-driver running on the embedded board recognizes a radar signal and switches the channel dirctly. So my question is - is there any driver available supporting 802.11h? I do not care about the chipset manufacturer or anything else. All I need is a working DFS-capable driver.
View 4 Replies
ADVERTISEMENT
May 9, 2010
Is the radeon open source driver 6.13 supporting Xorg 6.5 and Mesa 7.8.1?
View 9 Replies
View Related
Dec 17, 2010
Each time after boot up from hibernation I see notification that "Ubuntu is running in low-graphics mode". I tried to solve the problem as usual but this time I can not resolve it.I haven't expected this problem on new boot or restart. I suppose that the problem is in incorrect video driver or something else.Could you please share your experience how to resolve my problem? How can I upgrade video driver for GMA 3150 supporting?
View 1 Replies
View Related
Jul 25, 2009
I am new to linux. I install fedora 10 in text mode in my system. Because some drivers didn't support. I don't no know how to install supporting drivers. My system config. are Intel 945 mother board, 512 DDR2 RAM, 80GB IDE hard disk, P4 3GHz processor. When i try to install in graphics mode after disk checking i.e while anaconda is loading my monitor automatically turned off. So I recognized that problem with some driver. So I installed in text mode. Please tell me where do i get drivers for my system and how to install in my system. I don't have Internet connection for automatic installation using yum which was i found from linux forum so kindly tell me manual installation.
View 2 Replies
View Related
Jul 4, 2011
I recently install F15 in my dell studio 15 laptop and find that is WIFI is not supporting. Below is the output of lsmod command
[root@server ~]# lsmod
Module Size Used by
fuse 53420 3
[code]....
View 1 Replies
View Related
Apr 4, 2011
linux Operating system, in my organization they provided suse 10.2, but I have to use some video file's, i try many online download but its not supporting in my system
View 1 Replies
View Related
Jan 5, 2010
I currently using RPM version 4.4.2.3. It fails to build with files larger than 2 GB and file sets larger than 3 GB. I have files larger than 2 GB and sets larger than 3 GB.Is there a work around, possibly a switch or option for RPM, that will ignore this limitation?
View 8 Replies
View Related
Oct 13, 2010
I have CentOS 5.5. server on 2 raid 1 drives .The system is a quad core Intel CPU with 2GB RAM.Printers:-
HP p1006 laserjet
HP multifunction 5600
Canon prixma ip3000
Canon prixma ip4500
I cannot get any of these printers to work on this server.
View 2 Replies
View Related
Jun 19, 2011
I was informed that Firefox 3 supports HTML5 but Centos 5's Firefox is not supporting it. This is the screenshot of the video that failed to run on Centos 5, Firefox 3. I also tried to install the latest version of adobe flash player but the new version didn't work.
View 3 Replies
View Related
Jan 24, 2011
I have a HP DC 6000 small form factor which has not taken the GUI after installing the debian lenny version 5.07 on it. I have tried installing 5.01-5.07. None of the Debian series do have the supported driver for the on board graphics card for HP box it seems. I can take the terminal and can see the /etc/X11/xorg.conf file which does not have much alterations form the default one which can make the driver been taken by it. Could some body help with the hp driver for Debian for the respective graphics card or could some body me with the content of xorg.xonf file.
View 3 Replies
View Related
Jul 5, 2010
On SuSE 10.0 I used to have an app simply called, "Dictionary" and it was placed in the Office > Database section of the kicker menu. I can't seem to find that app anywhere for OpenSUSE 11.2. Did they stop supporting/making it?
View 3 Replies
View Related
Mar 26, 2011
I am using ubuntu 10.10 i need to install windows 7 software in ubuntu 10.10 via wine. but wine supports only windows XP or how to upgrade the wine supports with the windows 7 softwares.
View 7 Replies
View Related
May 8, 2011
What is the first Matlab release that fully supports 64-bit? Is it 2010a? I've got 64-bit installations of Linux and Mac OS X, and want to make sure I install a copy of Matlab that takes full advantage of 64-bit and the resulting larger memory support.
View 1 Replies
View Related
Jul 13, 2011
Did ubuntu removed files for 9.4 repository from there server coause when I do Quote: sudo apt-get update I get following warnings
[code]...
View 3 Replies
View Related
Jul 8, 2011
Why can't chroot command be used for dynamically linking objects?
View 1 Replies
View Related
May 14, 2011
I want to build a simple OCR program and I was wondering what library to use. The images are saved on my hdd as colour .png files, i won't be using any effects on them but I will be working with pixels a lot, so direct access to them would really be great.So I was curious if there's a lib that provides direct access to individual pixels and pretty much nothing else (libpng, devIL or QImage from qt are all good but each has it's downfalls).
View 8 Replies
View Related
Apr 6, 2010
Can an unattended Kickstart support both IDE (hda) and SCSI (sda)? The goal is to to create a new virtual machine from scratch. What I have works for Parallels in which a new VM defaults to emulate an IDE hard disk. It does not work for VMware Workstation which defaults to emulate a SCSI disk.
The relevant Kickstart section: bootloader --location=mbr --driveorder=hda --append="rhgb quiet"
clearpart --all --initlabel --linux --drives=hda
part /boot --fstype ext3 --size=100 --ondisk=hda
part pv.2 --size=0 --grow --ondisk=hda
volgroup VolGroup00 --pesize=32768 pv.2
logvol / --fstype ext3 --name=LogVol00 --vgname=VolGroup00 --size=1024 --grow
logvol swap --fstype swap --name=LogVol01 --vgname=VolGroup00 --size=1024 --grow --maxsize=2048
Can the Kickstart file be made to not care what drive type is there, or conditionally handle either type?
View 4 Replies
View Related
Jun 21, 2010
It has been haunting me for weeks and I haven't been able to fix it so far: When I installed the wireless driver 43XX series on my laptop using a wired internet, I saw the wireless network for a while and after I rebooted my system, My kernel(31) got corrupted and I got error "kernel Panic (and some sync error)",Thus I started using an older kernel(14),Now When I install wireless driver or mobile broadband driver(wvdial), they get vanished after the reboot and my mobile device modem isn't detected.But they are installed in my system(as shown by synaptic package manager but doesn't seemt to work) I desperately want to use mobile broadband.
View 1 Replies
View Related
Jun 21, 2010
How To: Uninstall/Remove Old Wireless Driver to make way for New Driver (RTL8191SE)?
Here's the new driver:
I have been having trouble with my wireless connection intermittently disconnecting and reconnecting repeatedly (sometimes every couple of seconds). I posted a thread about this here on Ubuntu Forums titled: Ubuntu 10.45 & NetworkManager Applet 8.0: Connects & Disconnects Frequently.
View 2 Replies
View Related
May 13, 2010
I just installed ubuntu and I have no wifi connection. How would I download and intsall a copy from my Win XP boot?
View 2 Replies
View Related
Sep 24, 2009
I don't have any problem when I'm communicating with one client. The problem starts when I connect another client.The server eventually ignores the older clients and responds only to the latest one.The working mechanism is simple: Accept connections and print messages received from multiple clients.
View 4 Replies
View Related
Feb 20, 2010
I have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.
Using these instructions....
[url]
When I make the WLAN driver, I get this:
View 2 Replies
View Related
Jan 7, 2011
I've seen several threads in Ubuntu regarding implementing vaapi/xvba enabled media players for ATI GPU rendering. Does anyone know of any precompiled rpms for 11.3 (or tips for building on opensuse). I've installed Hellgasts xvba-video-amd rpms from the build service. I wasn't able to successfully build my own mplayer-vaapi from Index of /~gbeauchesne/mplayer-vaapi.
View 3 Replies
View Related
Jul 16, 2011
Is Epiphany the only browser for Gnome supporting password storage in keyring?Firefox and Chromium both seem to store login credentials in own storage thus limiting interoperability.
View 2 Replies
View Related
Jan 6, 2011
I have a .swf file that I was going to play, but when I try to open it, totem (which apparently is my .swf program) says "GStreamer encountered a general supporting library error." Now since I know a little bit about linux, I opened up a terminal and redirected the stderr and stdout to a file called "error". Then I read the file and it said:
** Message: Error: GStreamer encountered a general supporting library error.
gstffmpegdemux.c(1243): gst_ffmpegdemux_open (): /GstPlayBin2lay/GstURIDecodeBin:uridecodebin0/GstDecodeBin2:decodebin20/ffdemux_swf:ffdemux_swf0:
Input/output error
So then I interpreted that as meaning that there was a library called "gstffmpegdemux.c" that needed replacing. So I tried using synaptic to replace. Then Synaptic wouldn't let me get the package, Though I could see it existed (I would put up a screenshot, but for some reason it won't let me upload) then I tried aptitude, which claims it doesn't exist, and then apt-get which also claims that it doesn't exist.
View 4 Replies
View Related
Feb 8, 2009
A friend of mine has a Dell XPS1530 lappy that has a broadcom bcm4328 wireless adapter. I tried installing kismet on it so I can scan for wireless network in range. I configured it with the source driver as bcm43xx in kismet.conf and complained that the driver didn't support monitor mode. It uses the proprietary 'wl' kernel module to operate but kismet can't use the 'wl' module and it says the same error. I tried unloding the wl and b44 modules and loding the b43 driver but then the adapter stoped working. I searched on the net a bit and found out that kisment doesn't work with the prorpietary drivers for that card.
View 14 Replies
View Related
Jul 10, 2010
I am installing mod_perl on the Linux box. Could successfully installed httpd, mod_perl, expat. Now when I try to run "make" command for libapreq2-2.12, it gives following error -
[FONT="Arial"]Making all in glue
make[1]: Entering directory `/opt/customer/apache/2.2.8_64_modperl/lib/libapreq2-2.12/glue'
cd perl; /usr/bin/perl Makefile.PL -apxs /opt/customer/apache/2.2.8_64_modperl/bin/apxs
Can't locate Apache2/Build.pm in @INC (@INC contains: /usr/lib64/perl5/5.8.5/x86_64-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib64/perl5/site_perl/5.8.5/x86_64-linux-thread-multi /usr/lib64/perl5/site_perl/5.8.4/x86_64-linux-thread-multi /usr/lib64/perl5/site_perl/5.8.3/x86_64-linux-thread-multi /usr/lib64/perl5/site_perl/5.8.2/x86_64-linux-thread-multi /usr/lib64/perl5/site_perl/5.8.1/x86_64-linux-thread-multi
[Code]...
View 2 Replies
View Related
Oct 13, 2010
Does anybody know where to complain about netflix not supporting ubuntu.
View 2 Replies
View Related
Jan 26, 2010
i had a suffer installing broadcom b43 or the brodcom STA driver i ended with STA in Hardware drivers i installed it and it's activated but not in use and i still have no wireless connection i'm on ubuntu 9.10
View 1 Replies
View Related
Jun 3, 2010
I've recently installed the new LTS, but my wireless doesn't work on it. Since my adaptor works on my machine under 9.10, I can only assume this is down to a lack of driver for my adaptor within 10.04.
Would it be feasible to find the driver within the 9.10 system for my adaptor and install it onto my 10.04 system? If it is, fantastic! How would I go about doing such a thing?
View 1 Replies
View Related
