I currently using RPM version 4.4.2.3. It fails to build with files larger than 2 GB and file sets larger than 3 GB. I have files larger than 2 GB and sets larger than 3 GB.Is there a work around, possibly a switch or option for RPM, that will ignore this limitation?
View 8 Replieslinux Operating system, in my organization they provided suse 10.2, but I have to use some video file's, i try many online download but its not supporting in my system
View 1 Replies View RelatedI have a .swf file that I was going to play, but when I try to open it, totem (which apparently is my .swf program) says "GStreamer encountered a general supporting library error." Now since I know a little bit about linux, I opened up a terminal and redirected the stderr and stdout to a file called "error". Then I read the file and it said:
** Message: Error: GStreamer encountered a general supporting library error.
gstffmpegdemux.c(1243): gst_ffmpegdemux_open (): /GstPlayBin2lay/GstURIDecodeBin:uridecodebin0/GstDecodeBin2:decodebin20/ffdemux_swf:ffdemux_swf0:
Input/output error
So then I interpreted that as meaning that there was a library called "gstffmpegdemux.c" that needed replacing. So I tried using synaptic to replace. Then Synaptic wouldn't let me get the package, Though I could see it existed (I would put up a screenshot, but for some reason it won't let me upload) then I tried aptitude, which claims it doesn't exist, and then apt-get which also claims that it doesn't exist.
I am using the diff command with the -r option, to compare a large number of files and files in subdirectories. My main interest is to find out which files have been changed, and not what the actual changes are, and since a lot of files has been changed, it would be a lot easier to view the file names only. Is there and option for diff that might do this, or does there exist a similar tool/command that could do the job?
View 1 Replies View RelatedI've discovered that Dolphin seems to lose random files when copying many large folders.
I first noticed this a few months ago when I tried to copy my music library from one folder to another on the same HDD. It consisted of around 600 folders and 6500 files. During the copy there were no errors but after the copy I found that some of the newly copied folders were missing files. I put it down to human error or a glitch.
Yesterday I tried to copy 13 folders containing rips of some of my DVDs. Each folder basically had one film of either 700MB or 1.4GB. Again no errors showed up during the copy but I found 3 of the newly copied folders were empty.
It's not so critical with music or films but I can't afford to lose work data like this.
Has anyone experienced or seen a similar problem with Dolphin? I'm going to have to do some more extensive testing but this is not good.
The first time I noticed the problem I was running KDE4.3.4 (I think) and now the latest was with KDE4.4.0.
I want to automate this using script.How to automate it?
File1:
s.no# 1 name:aaaaaa
city:abcd
[code]...
Problem is with files greater than 4G onto dual layer or BD disks.mkisofs crashes. I believe the problem to be when this requires udf filesystem and disk does not get written to. As yesterday version is suse11.3 patched to date. k3b writes standard dvd disks ok. I am seeing a lot of searches saying this is because of cdrkit rather than cdrtools, can I replace this easily? Is this the case? Tried setting the k3b options when burning to udf same error. Other searches show k3b has fixed probs with these issues, so appears to point to underlying mkisofs stuff full error log in yesterdays post if it helps. I will also try on ubuntu to see if it works there
View 1 Replies View RelatedI always wanted cp to have a progress bar for large files. I came across this:[URL]... I just wonder, how could you install it as an Arch package? Is it possible?
View 9 Replies View RelatedI am using xfce desktop and terminal.
1) How do i check to see what is the default FTP Client used by Slackware12.2 when i type:
$ftp
2) How do i get ftp to download large files? > 2gb from ftp server elektroni.phys.tut.fi or any ftp server.
I need to download some very large files (circa 75 GB) from a remote server via SFTP. I've been using SFTP via the command line on my Linux netbook. Around halfway through, the transfer stops and says "stalled." Can anybody recommend a reliable way to download these files?
View 1 Replies View RelatedI have Ubuntu on both my laptop and desktop machines, both are connected to the same network. I back up the laptop to the desktop by running the following on the laptop:
rsync -avv --stats /home/alisdt alisdt@xxx.xxx.xxx.xxx:/home/alisdt/laptop_backup (with the IP address of the desktop instead of the many x, obviously). Whenever rsync hits a large file (greater than a few MB), the network use rapidly drops to ~60KB/s (that's kilobytes not bits). When I copy the same file to the same place using scp, I get > 500KB/s throughout the transfer. Things I've tried:
* mounting the desktop home dir on the laptop using SSHFS -- a simple file copy is fast, rsync is still slow
* ditto with NFS
* rsync --whole-file option, in case the delta-transfer algorithm was choking on large files
* rsync --inplace option
* HPN-SSH (http://www.psc.edu/networking/projects/hpn-ssh/) to enable dynamic window and unencrypted bulk transfer, just in case it was some ssh bottleneck I think it's either an rsync application problem, or a network problem that is only affecting rsync. Any ideas, or other ideas of what I can try to debug? In case it's relevant, I'm using 9.04 on both machines. (A standing bug prevents me from upgrading the laptop, and I haven't bothered to upgrade the desktop).
I am trying to move a large amount of files (over 30k and 86GB) to another HDD but I get a Augment list too large error?? I tried rsync, cp, mv and still the same error
View 1 Replies View Relatedi have a problem with cups on a lucid/64 machine.
"Unable to write print data: Broken pipe"
The pdf-file to print has a size of 4,7MB. After sending the file to the printer the size of the file is more than 18 MB.
We use a Xerox WorkCentre 7232 which is via
socket://ip_adress:9100
connected to cups. The same configuration had been working fine for several years with hardy.
Cups refuses to print large files. When splitting up the print-file all works fine.
how I can randomly write / create a 1 GB file in bash to test disk / network i/o? I was told I could use the 'dd' command but I don't know if there are some better ways and or what the 'dd' command looks like.
View 7 Replies View Relatedin my middle of script i am using tar command to tar some 1000 images and size of each image is 5MB.
all the images are provided as argument as tar -cvf file.tar <all images as argument>
but my tar file file.tar does not contain all the images.
I would like to transfer my music library and movie collection from my Desktop computer running Windows Vista and my laptop running Debian Squeeze. I have the laptop connected via wireless but it's possible to connect the two either directly with a CAT5e cable or through the router. I'm just wondering what the best way to do this would be.
View 8 Replies View RelatedI have Fedora 12 (with all the latest patches, including the 2.6.31.6-162 kernel) installed on a new Supermicro SYS-5015A-H 1U Server [Intel Atom 330 (1.6GHz) CPU, Intel 945GC NB, Intel ICH7R SB, 2x Realtek RTL8111C-GR Gigabit Ethernet, Onboard GMA950 video]. This all works great until I try to transfer a large file over the network, then the computer hard locks, forcing a power-off reset.
Some info about my setup:
[root@Epsilon ~]# uname -a
Linux Epsilon 2.6.31.6-162.fc12.i686.PAE #1 SMP Fri Dec 4 00:43:59 EST 2009 i686 i686 i386 GNU/Linux
[root@Epsilon ~]# dmesg | grep r8169
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[code]....
I'm pretty sure this is an issue with the r8169 driver (what I'm seeing is somewhat reminiscent of the bug reported here). The computer will operate fine for days as a (low volume) web server, and is reasonably stable transferring small files, but as when as I try to transfer a large file (say during a backup to a NAS or a NFS share), the computer will hard lock (no keyboard, mouse, etc.) at some point into the transfer of the file. It doesn't seem to matter how the file is transferred (sftp, rsync to NFS share, etc.).
I have a problem with burning some disks. I believe the problem to be when the file sizes are large. using suse 11.3 x 64 and updates done. k3b version 2.0.1-1pm 2.7 burned normal dvd yesterday with3.5 Gb + 1.5Gb files. Tried burning to BD-R disk with 11.5 Gb file. I have burned blu ray disks before with my machine but used nero, I would prefer to use k3b as should do this. I get error of mkisofs crashed and following error log
[code]...
I've a directory containing around 2.8 lacs of files. I want to move them to another directory.If I use cp or mv then I get an error 'argument list too long'. If I write a script like
for file in ls *; do
cp {source} to {destination}
done
then because of ls command , its performance degrades.How can I do this?
I want to transfer an arbitrarily large file (say >20GB) between 2 servers. I have several considerations:
Must use port 22 (ssh) because of firewall restrictions
Cannot tax the CPU (production server)
Memory efficiency
Would prefer a checksum check but that could be done manually
Time is not of the essence
Server A and Server B are on the same private network (sharing a switch) and data security is not a concern, Server A and Server B are not on the same network and transfer will be via the public internet so data security is a concern, My first thought was using nice on an scp command with a non-CPU-intensive cypher (blowfish?). But I thought I'll refer to the SU community for recommendations.
I am facing problem in copying a large number of file 18 lakh (18,000,000) files from my personal hardisk to another hardisk each file is very small and size of folder is around 3.95 GB copying files using copy given by Windows is frustrating and I am not even able to compress file its giving me error that its not readable.And problem is I am not able to open this drive in Linux it showing me error there saying do diskchk in Windows and Windows disk check is also not able to repair this drive and goes into some mode unsolvable.Is there any way to open disk with error to open in Windows and if not any way I can copy data faster?ERROR: Disk labled EDU is corrupt go to windows and chkdsk /f there and reboot into window 2 times.
View 3 Replies View RelatedIs there a file system that both Mac OSX 10.5 and linux can read/write for large files (like 4gb files)? My desktop is Ubuntu and I run most from there, but I want to back up my MacBook and linux box on the same external hard drive. Seems there are some (paid) apps for Mac that will mount NTFS but I'm wondering if there is just a shared files ystem that will work for both.
View 9 Replies View RelatedI'm having a bit of an issue with Lucid installed via Wubi. I stuck the OS on its own partition (30 GB in size), and don't store any large files in the Ubuntu file system (when I download something large I move it to another hard drive.) I don't have anything wacky or esoteric installed on my system.
I've been consistently having a problem where, after a few hours or a few days of being booted up, Ubuntu warns me that my available HD space is dangerously small. The amount of available HD space Ubuntu sees then shrinks from a few GB to nothing within a few minutes, and the only way I can seem to solve this is to reboot. Taking a closer look at what's happening, my Home folder balloons in size until there's no more writable space recognized. But there are no files being created or added to, so it looks like there's a bug of some sort. This SEEMS to be correlated with watching videos (or maybe it's the pulling of large files from a mounted directory into RAM? My videos are all on another HD, as mentioned before). I can generally go a few days without getting the "low space" message, but I can't seem to make it through a full 2-hour movie without getting the error.
Every time I attempt to transfer over a large file (4 GB) via any protocol, my server restarts. On the rare occasion that it doesn't restart, it spits out a few error messages saying "local_softirq_pending 08" and then promptly freezes. Small files transfer fine.
Relevant information:
Ubuntu server 10.10
Four hard drives in RAID 5 configuration
CPU/HD temperatures are within normal range
I understand that chroot is usually used to provide security, however, for my issue, security is a big don't care. I am very new to using chroot and don't fully understand how the chroot'd env works.
problem: Trying to use a vendor supplied cross compile environment. The environment runs as a chroot'd env and works just fine. I have a large number of additional modules that I wish to compile in the chroot'd environment. FYI, these modules are also (succesfully) compiled for other targets not using chroot'd env's. Copying the source files into the the chroot environment is not an option (don't have hours to wait for copies to finish and it would break the make system). Having them live in the environment is also not an option (the chroot build is a tiny part of the build process and we cannot revamp our entire source tree to accommodate it).
I am looking for a way to have the compiler in the chroot'd env have access to a path that is outside of the env and typically higher up in the same path that holds the chroot'd env. I have tried soft links (they don't work as expected). Hard links only work for single files and there are 10's of thousands of files that would need to be linked. I am not sure how I would go about exporting the additional files and then mounting the exported files in the chroot'd env (or if that would even work).
I am looking for a way to search for large numbers in text files and print the nearby lines.
For example if I had a text file like:
Event: 11
blah: 3
blah: 41 bleh: 19
Event: 2
blah: 31
[Code].....
I am looking for a file sharing program to install on my dedicated server that will allow me to upload large MP3 files and allow my clients to download them. these files are recordings of counseling sessions for families who are seeking help for their children.
What I am looking for is similar to the system this company uses [URL].
how to transfer large files from my laptop to external hard drive. Problem occurs when I'm sending Blu-ray films (4.4GB) to external, gets to 4GB and then comes up with error. Is there any way of breaking it up and then merging when it reaches the hard drive or is there a way of sending it as one whole file.
View 1 Replies View RelatedThis problem is not exclusive to Ubuntu, I've experienced it in Windows and OSX as well, but it seems that almost every time I transfer a large number of files (i.e. my music collection) between my desktop computer and laptop via my external hard drive, I end up losing files for no reason. I usually don't notice the files are missing until later on, because I am never informed of any data loss. Now, every time I make a large transfer of files, I just do it two or three times to ensure that I don't lose any files.
View 2 Replies View Relatedsyslog, messages and kern.log are incredibly huge files that are taking up a lot of space on my hard drive. Is it safe to remove them and/or to reduce logging so it doesn't take such an enormous amount of hard disk memory? If so, how can I reduce the logging so it doesn't produce logs that are 10s of GB in size?Also, mounting a drive places it into the folder /media. Will it become problematic if the size of the mounted drive exceeds the amount of free space available on my Ubuntu partition?
View 4 Replies View Related