I recently install F15 in my dell studio 15 laptop and find that is WIFI is not supporting. Below is the output of lsmod command
[root@server ~]# lsmod
Module Size Used by
fuse 53420 3
[code]....
I am new to linux. I install fedora 10 in text mode in my system. Because some drivers didn't support. I don't no know how to install supporting drivers. My system config. are Intel 945 mother board, 512 DDR2 RAM, 80GB IDE hard disk, P4 3GHz processor. When i try to install in graphics mode after disk checking i.e while anaconda is loading my monitor automatically turned off. So I recognized that problem with some driver. So I installed in text mode. Please tell me where do i get drivers for my system and how to install in my system. I don't have Internet connection for automatic installation using yum which was i found from linux forum so kindly tell me manual installation.
View 2 Replies View RelatedI have Intel Pentium Dual Core E2180 / 2 GHz processor. i just upgraded my system with 4 memory sticks i.e. 7GB of RAM due to my requirements. Now the issue that i am facing is that my 32bit fedora system does not showing and suppoting more than 3.XX gigs of RAM when i consult "/proc/meminfo", "free -m" and "top". Now i have done two thing, first i have installed a PAE version of kernel. In result of this my system become two slow with the following error at startup. Error: starting udev: wait timeout. will continue in the background <Failed> Secondly, i installed a 64bit version of Fedora 10 but still it showing not more than 3GB of memory. Also a kernel bug system alerts me of not supporting more than 3gigs of RAM and ask me to send that bug to[URL]
View 14 Replies View RelatedI have a 802.11a-WLAN running. Due to regulatory restrictions, I am to do some dynamic frequency selection(DFS) on certain channels available in the 802.11a-band. This is called 802.11h. I am seraching for a solution reagarding 802.11h-functionality. I do know, there is a branch within madwifi called madwifi-dfs which was developed mainly by Bennoit Papillaut and Pavel Roskin.
The problem with this driver is, that it doesn't work reliable. If I simply start a network scan on my Lenovo-machine, the DFS-driver running on the embedded board recognizes a radar signal and switches the channel dirctly. So my question is - is there any driver available supporting 802.11h? I do not care about the chipset manufacturer or anything else. All I need is a working DFS-capable driver.
linux Operating system, in my organization they provided suse 10.2, but I have to use some video file's, i try many online download but its not supporting in my system
View 1 Replies View RelatedI currently using RPM version 4.4.2.3. It fails to build with files larger than 2 GB and file sets larger than 3 GB. I have files larger than 2 GB and sets larger than 3 GB.Is there a work around, possibly a switch or option for RPM, that will ignore this limitation?
View 8 Replies View RelatedI have CentOS 5.5. server on 2 raid 1 drives .The system is a quad core Intel CPU with 2GB RAM.Printers:-
HP p1006 laserjet
HP multifunction 5600
Canon prixma ip3000
Canon prixma ip4500
I cannot get any of these printers to work on this server.
I was informed that Firefox 3 supports HTML5 but Centos 5's Firefox is not supporting it. This is the screenshot of the video that failed to run on Centos 5, Firefox 3. I also tried to install the latest version of adobe flash player but the new version didn't work.
View 3 Replies View RelatedI have a HP DC 6000 small form factor which has not taken the GUI after installing the debian lenny version 5.07 on it. I have tried installing 5.01-5.07. None of the Debian series do have the supported driver for the on board graphics card for HP box it seems. I can take the terminal and can see the /etc/X11/xorg.conf file which does not have much alterations form the default one which can make the driver been taken by it. Could some body help with the hp driver for Debian for the respective graphics card or could some body me with the content of xorg.xonf file.
View 3 Replies View RelatedOn SuSE 10.0 I used to have an app simply called, "Dictionary" and it was placed in the Office > Database section of the kicker menu. I can't seem to find that app anywhere for OpenSUSE 11.2. Did they stop supporting/making it?
View 3 Replies View RelatedI am using ubuntu 10.10 i need to install windows 7 software in ubuntu 10.10 via wine. but wine supports only windows XP or how to upgrade the wine supports with the windows 7 softwares.
View 7 Replies View RelatedWhat is the first Matlab release that fully supports 64-bit? Is it 2010a? I've got 64-bit installations of Linux and Mac OS X, and want to make sure I install a copy of Matlab that takes full advantage of 64-bit and the resulting larger memory support.
View 1 Replies View RelatedDid ubuntu removed files for 9.4 repository from there server coause when I do Quote: sudo apt-get update I get following warnings
[code]...
Why can't chroot command be used for dynamically linking objects?
View 1 Replies View RelatedI want to build a simple OCR program and I was wondering what library to use. The images are saved on my hdd as colour .png files, i won't be using any effects on them but I will be working with pixels a lot, so direct access to them would really be great.So I was curious if there's a lib that provides direct access to individual pixels and pretty much nothing else (libpng, devIL or QImage from qt are all good but each has it's downfalls).
View 8 Replies View RelatedCan an unattended Kickstart support both IDE (hda) and SCSI (sda)? The goal is to to create a new virtual machine from scratch. What I have works for Parallels in which a new VM defaults to emulate an IDE hard disk. It does not work for VMware Workstation which defaults to emulate a SCSI disk.
The relevant Kickstart section: bootloader --location=mbr --driveorder=hda --append="rhgb quiet"
clearpart --all --initlabel --linux --drives=hda
part /boot --fstype ext3 --size=100 --ondisk=hda
part pv.2 --size=0 --grow --ondisk=hda
volgroup VolGroup00 --pesize=32768 pv.2
logvol / --fstype ext3 --name=LogVol00 --vgname=VolGroup00 --size=1024 --grow
logvol swap --fstype swap --name=LogVol01 --vgname=VolGroup00 --size=1024 --grow --maxsize=2048
Can the Kickstart file be made to not care what drive type is there, or conditionally handle either type?
Is the radeon open source driver 6.13 supporting Xorg 6.5 and Mesa 7.8.1?
View 9 Replies View RelatedEach time after boot up from hibernation I see notification that "Ubuntu is running in low-graphics mode". I tried to solve the problem as usual but this time I can not resolve it.I haven't expected this problem on new boot or restart. I suppose that the problem is in incorrect video driver or something else.Could you please share your experience how to resolve my problem? How can I upgrade video driver for GMA 3150 supporting?
View 1 Replies View RelatedI don't have any problem when I'm communicating with one client. The problem starts when I connect another client.The server eventually ignores the older clients and responds only to the latest one.The working mechanism is simple: Accept connections and print messages received from multiple clients.
View 4 Replies View RelatedI've seen several threads in Ubuntu regarding implementing vaapi/xvba enabled media players for ATI GPU rendering. Does anyone know of any precompiled rpms for 11.3 (or tips for building on opensuse). I've installed Hellgasts xvba-video-amd rpms from the build service. I wasn't able to successfully build my own mplayer-vaapi from Index of /~gbeauchesne/mplayer-vaapi.
View 3 Replies View RelatedIs Epiphany the only browser for Gnome supporting password storage in keyring?Firefox and Chromium both seem to store login credentials in own storage thus limiting interoperability.
View 2 Replies View RelatedI have a .swf file that I was going to play, but when I try to open it, totem (which apparently is my .swf program) says "GStreamer encountered a general supporting library error." Now since I know a little bit about linux, I opened up a terminal and redirected the stderr and stdout to a file called "error". Then I read the file and it said:
** Message: Error: GStreamer encountered a general supporting library error.
gstffmpegdemux.c(1243): gst_ffmpegdemux_open (): /GstPlayBin2lay/GstURIDecodeBin:uridecodebin0/GstDecodeBin2:decodebin20/ffdemux_swf:ffdemux_swf0:
Input/output error
So then I interpreted that as meaning that there was a library called "gstffmpegdemux.c" that needed replacing. So I tried using synaptic to replace. Then Synaptic wouldn't let me get the package, Though I could see it existed (I would put up a screenshot, but for some reason it won't let me upload) then I tried aptitude, which claims it doesn't exist, and then apt-get which also claims that it doesn't exist.
A friend of mine has a Dell XPS1530 lappy that has a broadcom bcm4328 wireless adapter. I tried installing kismet on it so I can scan for wireless network in range. I configured it with the source driver as bcm43xx in kismet.conf and complained that the driver didn't support monitor mode. It uses the proprietary 'wl' kernel module to operate but kismet can't use the 'wl' module and it says the same error. I tried unloding the wl and b44 modules and loding the b43 driver but then the adapter stoped working. I searched on the net a bit and found out that kisment doesn't work with the prorpietary drivers for that card.
View 14 Replies View RelatedI am installing mod_perl on the Linux box. Could successfully installed httpd, mod_perl, expat. Now when I try to run "make" command for libapreq2-2.12, it gives following error -
[FONT="Arial"]Making all in glue
make[1]: Entering directory `/opt/customer/apache/2.2.8_64_modperl/lib/libapreq2-2.12/glue'
cd perl; /usr/bin/perl Makefile.PL -apxs /opt/customer/apache/2.2.8_64_modperl/bin/apxs
Can't locate Apache2/Build.pm in @INC (@INC contains: /usr/lib64/perl5/5.8.5/x86_64-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib64/perl5/site_perl/5.8.5/x86_64-linux-thread-multi /usr/lib64/perl5/site_perl/5.8.4/x86_64-linux-thread-multi /usr/lib64/perl5/site_perl/5.8.3/x86_64-linux-thread-multi /usr/lib64/perl5/site_perl/5.8.2/x86_64-linux-thread-multi /usr/lib64/perl5/site_perl/5.8.1/x86_64-linux-thread-multi
[Code]...
Does anybody know where to complain about netflix not supporting ubuntu.
View 2 Replies View Relatedok so the router works in windows and i know the config details of it.i can see other wifi access points in the area but not my one. i have tried joining it as a "hidden network" to no avail.is there any reason why fedora would not detect my own wifi when it detects substantially weaker signals instead??
View 2 Replies View RelatedMy laptop has an internal wireless device and a button to turn it on/off, but since it has bad reception I use an external USB wireless adapter.The problem is that if I turn the internal wireless device off using the button, it also turns the USB wireless adapter off.Is there anyway to use the killswitch (the button) only for the internal wireless device?This only started to happen in Ubuntu 10.04.
View 7 Replies View RelatedI have 2 connections, wlan and wired, and I'd want to have a few websites (in my browser) to connect through the wireless connection while other go through the wired rj45 connection. s it possible? (without unplugging the rj45 cable...)
View 2 Replies View RelatedI have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
I was wondering if there's any way for a laptop to be both simultaneously connected to a wireless network, while at the same time acting as an ad-hoc network with local access to serve as a wifi connection for my mobile device, which would be ssh-ing into the laptop and using local resources.
View 1 Replies View Related