When attempting to use my ircd, I am receiving the following message in irrsi:
Code:
-!- Irssi: Looking up 127.0.0.1
-!- Irssi: Connecting to 127.0.0.1 [127.0.0.1] port 6667
-!- Irssi: Connection to 127.0.0.1 established
-!- Irssi: !hybrid7.debian.local *** Looking up your hostname...
[Code]....
Ive been trying to set up an irc server for the past couple of days. It works, but I havent been able to work out how to configure hybserv as well as server admins and ops, etc. Does anybody know of a good tutorial on how to configure ircd-hybrid with services? The endlessly long config file is just too confusing for me.
View 1 Replies View RelatedI have a Rackspace server running Ubuntu Lucid Lynx, where I have installed an IRCd-Hybrid. I can connect to the IRC server using irssi that was installed on the same machine where the server is, but when I try to access it from my computer at home or my friends try I get this error:
Code:
Connection Refused
What should I do?
I have a Rackspace server running Ubuntu Lucid Lynx, where I have installed an IRCd-Hybrid. I can connect to the IRC server using irssi that was installed on the same machine where the server is, but when I try to access it from my computer at home or my friends try I get this error: Code: Connection Refused What should I do?
View 1 Replies View RelatedI've been trying very unsuccessfully to get lm-sensors to work with my Asus P7P55D-E Deluxe Hybrid motherboard. It sports an Intel i7 Quadcore processor. Here is a link to everything that is in the computer:[URL]..Pretty much I'd like to do the sensors and get the turbo-v working. Does anyone know how to do this? The important thing is the sensors. I'm running Ubuntu 9.10 (10.4 had to many bugs at present).
View 3 Replies View RelatedOk so I have found the help doc in the ubuntu community spot and it says to run the following command,
Code:
grep -i switcheroo /boot/config-2.6.*
And I do that and nothing happend, so i though ok maybe i missed something and moved to the next step to see if the switch file is there and I do,
Code:
ls -l /sys/kernel/debug/vgaswitcheroo/switch
Says the file can not be found, and according to the post on the community help spot VGA_Swicheroo is not enabled, well my problem is how do i enable it and use it?
I can not get my usb dvb-t sick working. It is a hauppauge WinTV-HVR 900 hybrid TV stick.
The number on the backside is: M/R: 65018/BC20 Some time ago I read somewhere that this model was supposed to work with ubuntu 9.10. [URL] it is possible to make it work since the poster appears to be using the same model as I do.But I still have trouble setting it up.
I installed mythbuntu 9.10 this week on some old hardware, I had a Hauppauge 500MCE PVR in and made it work fairly easy. I'm used to gentoo
However, I want to record HD signal, so I plugged in a Eyetv hybrid and followed this guide url.
I extracted the driver, put it in into /lib/firmware, modprobed em28xx, rebooted. When I plug in the device, it is not recognised. I tried both usb ports. The ID is "0fd9:0018", which is somewhat different from similar hardware e.g. Hauppauge wintv-hvr-950 (ID 2040:6513 url.
I think the hardware has been updated, hope someone knows how to crack this one
I have added some additional information below!
# uname -a
Quote:
Linux m 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 i686 GNU/Linux
# lsmod | egrep -R "video|em|video|v4l"
Quote:
em28xx 80968 0
ir_common 48512 1 em28xx
videobuf_vmalloc 6496 1 em28xx
videobuf_core 17952 2 em28xx,videobuf_vmalloc
v4l2_common 17500 6 em28xx,wm8775,tuner,cx25840,ivtv,cx2341x
code.....
I am currently trying to make a Lifeview Hybrid flyDVB-t tv tuner work on Ubuntu Lucid. The problem is that I can't even see it on the lspci output, here it is:
Code:
$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
code....
I don't know what else to do, and I've been looking for a lot of time online.
Does anybody use USB HDTV (digital or hybrid) tuner ?
1) does teletext work in digital TV ?
- Do teletext pages appear immediately after page numbers entering or
- must you wait every time because of counter rewinding ?
2) Does analog FM radio (88 - 108 MHz) work in that kind tuners ?
I've got a task: make time server, that gets time from gps, shows it on display and send to different systems through different ports like com, ltp, etc.
Solution is qt program, included in hybrid iso image.
I've created my binary-hybrid.iso debian, added my program and installed it on pc sudo dd if=/media/cdrom/binary-hybrid.iso of=/dev/sda then i restarted and everything is ok, but...
I also need:
1) to make my pc works as ntp-server, to do this i must change file ntp.conf in ntp****.deb before i build my iso
how can i do this?
as i realized according to live.debian.net/manual it's possible to do by putting smth to /live-build/config/packages.chroot and by adding some parameters to lb config but i can't find how and what
2) to save my program parameters after reboot. for example, i have such parameter as gmt. it defined as +3. i can change it while program is running to -5 for example and i want to have gmt -5 when i next time turn on my computer
When in programming it is simple - program creates ini file in it's directory and read/write parameters from this ini-file, but how to make possible to do the same thing when it works from iso?
I have an AverTV Hybrid Volar MAX.I really would like to get the FM radio tuner working with this on my laptop. When I do 'sudo fmscan' I get the following:ioctl VIDIOCGTUNER: Invalid argumentI have downloaded and installed the drivers from AverMedia's web page (TV is working).This is on a Compaq Laptop (Presario V5305WM) on a fresh install of Jaunty.
View 1 Replies View RelatedIs it possible (without too much difficulty) to have an Openbox/Gnome desktop?
Since Gnome is a full desktop environment and Openbox is only a Window Manager.
Use the Gnome DE and have Openbox WM, instead of Metacity or Compiz? (with Ob Config & Menu included)
I know it won't be near as light as a straight Openbox, but it would add Ob convenience to Gnome DE. What do you think? Work-arounds?
On a small partition I have LinuxMintDebian 'testing' (Gnome) x64 ... can I 'add' Openbox? Not replacing anything except the WM?
I am also new to ubuntu but have manage so far,except for my tv-card. Seems like Metv and kaffeine cant see the tv-card ?! I have a asus mycinema-p7131 hybrid,does someone have info on installing this ? except for this i think ubuntu 10 is great.
View 1 Replies View RelatedOn both Karmic Koala as well as Lucid Lynx, I am having massive problems getting my nvidia card to register properly. I am on an Acer Aspire 5953 laptop pc with a Gt130m discrete GPU in a hybrid installation with an onboard GPU.Freshly installed, both 9.10 and 10.04 runs smoothly, I can enable desktop effects, I can even see the screensavers that run openGL - although they run laggily in fullscreen, since they're obviously using the onboard, and very weak, GPU.The problem however, appears whenever I install the suggested NVIDIA drivers that Ubuntu finds for me - after doing this, I am asked to reboot the system and on both systems, I am treated to a black screen, instead of a login-screen. The only way to get the system up and running again, I have found, is boot in fail safe mode and edit /etc/X11/xorg.conf, erasing everything. This lets me boot back up in a regular mode.
When I check the logs, both the onboard GPU and the gt130m GPU is located, the onboard as PCI:0:0:2:0 and the nvidia gt130m discrete gpu as PCI:0:1:0:0 - I have tried adding BusID: ("PCI:0:1:0:0") to the xorg.conf, too, to no avail. I am continously treated to the black screen (a flicker at most) and the logs always tells me that no xserver could find no screens.So far, I have only been installing Ubuntu inside windows - I am hesitating to install on a fresh drive, since I am afraid of the nvidia black screen putting me in a position where I can't access the system. Is it possible that the fact that I install ubuntu inside windows might somehow affect Linux's capability of accessing my discrete GPU?
I can't find drivers to this TV tuner (MyVision Hybrid TV).
Result of lsusb command:
Bus 001 Device 004: ID 1b80:d412 Afatech
I have an EEEPC and wanty to make use of the ASUS SHE. However, I don't want a program that automatically changes performnce modes each time I go to AC or battery power (Jupiter). Jupiter also causes lag when I suspend the EEEPC pr when I plug in the AC adapter. I pretty often work on battery when I'm at home and I don't need powersavings then. I want a way to be able to turn on the power saving mode (I've heart it does more then just undercloaking the processor) whenever I want, but I don't want those modes to be changed automatically.
View 4 Replies View RelatedI am having trouble getting my USB-Dvb-Analog-Hybrid-TV-Card running with openSuse 11.1. (I already tried a lot of instructions I found on the net but none of them worked.) For example, when I try to install em28xx-new, compiling will work, but when modprobeing:
[Code]....
I am using dell XPS with hybrid graphics. Intel integrated graphics card and NVIDIA. I have installed both Ubuntu, Windows 7 and opensuse in it. Ubuntu and Windows comes up. But Opensuse after showing some boot messages goes blank and nothing comes up. I am using OpenSuse 11.4.
Code:
$ sudo dmidecode -s system-product-name
Dell System XPS L502X
$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation
Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 VGA compatible controller: nVidia Corporation Device 0df5 (rev a1)
Im making plans to buy a 15" Dell Inspiron notebook as it's currently the cheapest 15" notebook which is available in my country, and from what I have read, the Dell WiFi card used in the notebook is Broadcom based, and that Broadcom had recently released hybrid drivers for their cards. Now, after browsing through OpenSUSE's HCL [URL] it seems that a patch to the drivers is needed.how do you patch the driver? Do you just go to <extracted driver directory>/src/wl/sys/wl_iw.c and just throw in this whole chunk of text anyway into the file, or is there something more to it?
Code:
@@ -580,6 +580,7 @@
range->enc_capa |= IW_ENC_CAPA_CIPHER_TKIP;
range->enc_capa |= IW_ENC_CAPA_CIPHER_CCMP;
range->enc_capa |= IW_ENC_CAPA_WPA2;
[code]....
This is sort of mixed between hardware and software but it seemed more appropriate to me here. I'm building a server for very fast disk access. We have 8x32GB SSD SATA drives and 4x300GB SSD SATA MFT drives. The 300GB SSD drives are the slow kind of flash that writes slowly, and strangely is limited to 10K writes per sector. Long term data integrity isn't a big deal because it is backed up continuously but fast access to data is desired. Additionally the filesystem that contains this data deletes about 2.5 - 4 gigs of data per day, and adds about 2.5-4 gigs of data per day.
My plan is to create a hybrid drive of sorts, where the smaller 32G drives, lined up in RAID0, create a fast "buffer" disk, and on some increment what is in the buffer is written in bulk to the slower writing 300GB SSDs. I had two thoughts on how to achieve this, but ultimately I think that LVM snapshots are the best way to achieve this, put the read only "snapshot" on the big SSD drive and the other "differencing" part of the snapshot on the faster raid0. I'd much prefer a simpler solution where there is one block device to mount and all this is handled in the background.
I would like to know if someone was able to upgrade/fresh install ubuntu 10.10 maverick on a dell studio hybrid. First I've tried to upgrade. Everything went well, until the system started. First thing to notice is that the orange was so bright that was almost impossible to look at the monitor. Not a big deal, adjusting some monitor brightness etc. Second the mouse (usb) stopped for some fraction of a second, or a second, when you click to open a program. It is annoying but it is also a problem that I could wait to find some solution.
Third and worse, it was completely impossible to see videos in vlc or other players, I've tried vlc, xine, etc, the videos was stuttered, choppy. SMPlayer was able to play them better. I've tried the solution here [URL] and it does not work at least for me. Fourth the fans went completely crazy, running as mainly when I have to use smplayer, I've found some complains about that [URL] but the solution does not apply to my computer.
Then I've tried a fresh install hoping that some of the troubles would not appear. The only trouble solved was the look and feel. Mouse the same trouble, stuttered, choppy videos on vlc, fans running all the time. And now it was impossible to install the wireless proprietary driver Broadcom sta. The only solution was to come back to Lucid. A fresh install of Lucid and mouse working ok, no troubles seeing videos in vlc, fans working absolutely normal and no troubles to install the wireless driver.
I've got an Atom-based EeePC1000 with 2.6.34-0.slh.11-sidux-686.The DebianEeePC wiki ( as the following information.As of kernel 2.6.30, the "Super Hybrid Engine" is supported: /sys/devices/platform/eeepc/cpufv contains a value which is 256× the number of available settings plus the current setting; you write a number n (0 ≤ n < number of available settings) to it to alter the setting.
View 2 Replies View RelatedHybrid Storage harddisks use a large non-volatile cache to save power and improve speed. I wanted to ask if there's a reasonably simple way to simulate that under Linux. Ideally there would be a FUSE-filesystem that does this, For now this is purely theoretical, but my setup would be a small home server (Sheeva Plug) with an external USB harddisk that goes to sleep after a few minutes of inactivity. To keep it powered down as long as possible, I would like to use a 16GB SD card as a cache for the harddisk, thus simulating Hybrid Storage.
The only possible solutions I found thus far were Hierarchical storage management packages for enterprise use, which are way too expensive for this task.
to set up my usb, digital TV Tuner, an AVerTV Hybrid Volar HD (H830) , to work with MythTV? I note that the 'MythTV backend set-up', only refers TV Tuner cards, not usb sticks. Nevertheless, the link above provides a 'Linux x86' driver for my computer � a .tar.gz file. The link also provides an accompanying text file that asserts 'This package is tested with MythTV against Ubuntu 10.04'. I've recently installed Ubuntu 11.04.The accompanying text gives its pre-requisites as a. support linux kernel 2.6.29 or later. b. make sure /lib/modules/`uname -r`/build exists c. make sure "dvb_frontend.h" exist in your Ubuntu. d. kernel modules dependency: videodev, video buf-core, v4l2-common.
For (b), my computer shows the following path /lib/modules/2.6.38-10-generic/build$ I'm note sure what (c) means with 'in your Ubuntu' Needless to say, its later instruction doesn't work Install driver to system sudo ./xxx_LinuxDrv_x86_vxxx-beta_Install.sh I'm told that this 'command not found'
I'm on an HP envy with with hybrid graphics configuration. I installed debian 7.7 from DVD, but it failed to load i915 driver on its own. It loaded nouveau. But gnome falls back to classic mode. There is not brightness control either.I tried adding i915 to /etc/modules and also blacklisted nouveau at the command line. Now i915 gets loaded, but with some hickups as shown in dmesg. Still I'm in fallback mode in gnome.
Code: Select alljay@aura-envy:~$ dmesg | grep drm
[ 16.152467] [drm] Initialized drm 1.1.0 20060810
[ 16.161706] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
So I went ahead and added intel_agp (before i915 line) to modules file, but still no luck. I suspect there is no module called intel_agp at the first place, because :
Code: Select alljay@aura-envy:~$ sudo modinfo intel_agp
[sudo] password for jay:
ERROR: Module intel_agp not found.
URL....
I want to watch tv with my usb tv tuner Pinnacle pctv hybrid pro on Fedora 15 64bit.The best i could do is watch analog tv without sound at all ! or watching digital tv but without the ability to change channels ! i need to press the stop button and then choose my channel and hit play again. If i tried to change chanell it stuck . [URL] Its a quality tvtuner and i would like to use it.PS1: I was completely crazy testing the Fedora 15 64bit , gnome UI was so fantastic, fedora was so fast not like the ubuntu fatpig. Im so decided to format my harddisk and install only fedora.
View 1 Replies View RelatedThis week I picked up a Dell Studio Hybrid and installed CentOS on it. I originally used 5.0 since I already had the DVD and the network card wasn't recognized at all (lspci recognized it but the card didn't show up in system-config-network). I then downloaded the 5.2 DVD and installed that. The network card then showed up in system-config-network but it still didn't work. If DHCP is enabled it tells me that no link is present, and if I manually configure it, I still can't ping the router. lspci reports the following about the network card:
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
The driver used is r8169.
I put Fedora 10 on it and the network is working fine, but I'd rather run CentOS on this machine. Is the issue likely to be fixed with CentOS 5.3 or should I just stick with Fedora?
I'm running a hybrid graphics card (AMD Radeon HD 6630m) so naturally I'd like to have full functionality between the two.
Here's what I've done so far:
Downloaded the .run file from AMD's website
Built packages for both AMD and Intel side of the card
Unpackaged said packages
I used ATI Catalyst's GUI to install (in hindsight terminal might have been better and more informative) and it is now saying
After installation of the generated package, it is important to save your X Window configuration file, and then run 'aticonfig --initial' (in a console window) to complete the basic configuration, please run aticonfig from a console window or AMD CCC:LE from the Desktop Manager Menu
So how and why do i save my X Window config and when I give the aticonfig command it says no adapters detected
3 questions i have about "pm-suspend-hybrid"
1. is it possible to schedule this command in the same manner as shutdown ? eg sudo shutdown -h 60
2. is it possible to schedule the laptop to come out of suspend ?
3. i have a usb sound card (xfi go). when waking from suspend, the internal sound card is selected. i have to manually select the external sound card & for whatever reason, also unmute it too