3 questions i have about "pm-suspend-hybrid"
1. is it possible to schedule this command in the same manner as shutdown ? eg sudo shutdown -h 60
2. is it possible to schedule the laptop to come out of suspend ?
3. i have a usb sound card (xfi go). when waking from suspend, the internal sound card is selected. i have to manually select the external sound card & for whatever reason, also unmute it too
If I suspend this toshiba satellite, and the battery is or gets low it will wake from suspend to tell me that it will need to suspend due to a critical low battery. Which is pretty dumb. I've experimented with this by plugging and unplugging the ac adapter.
View 1 Replies View RelatedAll I want to do is to be able to shut the lid on my laptop, have it go into suspend like it already does, but upon opening it again, successfully start up again. It'll sleep just fine, but if you close the lid and try to open it again later, the lights will indicate it is starting up, but the screen won't initialize, and I am left with a blank, black screen.I've tried a line of code to enter into my menu.lst file, and it seemed like it should work, but it borked my computer and I had to manually reinstate the line of code it had before.
View 9 Replies View RelatedWhatever way I suspend my laptop (menu, keyboard shortcut, close lid), it seems to suspend just find (no panic lights, suspend LED indicator flashing as expected). However, when i try to resume, the laptop seems to begin the proper wakeup process (for example, the DVD-drive is tested), there's a lot of HDD activity for about 5 seconds, screen does not power on, and then the laptop just shuts off.
System setup:
lucid beta 2, fully updated (just check now)
LG E-500 laptop /w nvidia gforce mobile 8400G
bios version 1.17 from June 2007 (not sure this is important)
Things I tried:
* Completely remove anything to do with gpu drivers and installed nvidia-current driver.
* Suspend stress test described here. this didn't work at all. The first test failed (with ac adapter attached) and the second test suspended but didn't automatically resume (see "the behavior" above). Also, when I booted up again, no apport bug report is created. I tried both with rtc set to utc=yes and utc=no. with utc=yes, the second test did automatically resume, but the same problem happened (laptop shutdown while resuming).
* The debugging steps described here, but I couldn't get the "no_console_suspend" option to work. I tried adding both "no_console_suspend" and "no_console_suspend=1" (without quotes) to the boot script in the grub menu, but when I did pm-suspend in tty1, the laptop really did suspend. I would like to try to do this again if someone could explain how to add this option.
Notes:
* Not sure this is relevant, but when I boot up after a failed resume attempt, wireless network is disabled (this only happens after a failed resume!!!).
* I found a package called nvram-wakeup in synaptic that seems to be related to this. This package is not installed. Should I install it?
In case this is relevant, forgot to mention I'm running ubuntu in dual-boot along side windows7.
I've a MSI V601 laptop that won't come out from neither suspend nor hibernate and I tried almost everything so far...what shall I do?
View 1 Replies View RelatedI think it might have to do with an app I installed called Jupiter (http://sourceforge.net/projects/jupiter/) that missed with my power configs, I removed it but I still can't hibernate or suspend. Whenever I try to do either, my screen fades to black and nothing happens. If I move the mouse or touch the keyboard, it comes back.
View 5 Replies View RelatedThis is a new issue since 10.04 (9.10 did it right). I'm on 10.10 netbook right now. What I would like to figure out is how to tell the system to go into suspend when idle even though the lid is open. I don't know if this problem is hardware specific or just a config file edit. Just to get it out of the way, it does suspend correctly when the lid is closed - and I can tell it to suspend when the lid is open, but what I need is for it to suspend when I fall asleep working or forget I left it open without overheating / running out of battery and losing my work. I'm pretty good at doing things on linux, despite the fact that I'm running the netbook remix, so don't be afraid to tell me to open a file in the terminal or whatever.
View 1 Replies View RelatedI have done a fresh install of Ubuntu 11.04. My problem is that at the login screen if I close my laptop lid, the laptop goes into suspend. This is not the effect I want. GDM doesn't respect my settings in gnome-power-preferences and I can't seem to locate any other way to configure the power preferences for GDM. I have had 11.04 installed before as an upgrade to 10.10 and I did not have this problem in that case.
View 1 Replies View RelatedI've tried to look this problem up on Google but I haven't found much consensus on what to do. I have the HP g6-1070us
View 3 Replies View RelatedI'm running stock Debian 8.2 with GNOME DE on an Acer ES1-512 series laptop. Whenever I attempt to go into suspend, either by closing the laptop lid or holding ALT when clicking the power button in the top-left system menu on the desktop, my laptop briefly flashes the default GNOME lock screen, fades to black, and then hangs there. Usually, when my laptop would actually suspend, the power indicator light would change from blue to orange and slowly fade in and out. However, now it just sits on blue. There is no way to re-awaken the laptop from this state, and I have to force shutdown by holding the power button.
Running Code: Select allgrep -i error /var/log/messages gives me:
Code: Select allSep 28 17:59:57 debian gnome-session[1188]: [1504:1536:0928/175957:ERROR:mcs_client.cc(752)] Received close command, resetting connection.
Sep 28 18:17:50 debian gnome-session[1188]: [1504:1536:0928/181750:ERROR:mcs_client.cc(752)] Received close command, resetting connection.
Sep 28 21:27:52 debian gnome-session[1188]: [1504:1536:0928/212752:ERROR:channel.cc(307)] RawChannel read error (connection broken)
Sep 29 14:21:51 debian gnome-session[1188]: [1504:1536:0929/142151:ERROR:mcs_client.cc(752)] Received close command, resetting connection.
[code]....
I'm running CentOS 5.3. I have the laptop configured to suspend when the lid is closed. But it won't suspend when the lid is closed. Add if I try to suspend from the toolbar, it won't suspend.
View 3 Replies View RelatedI just upgraded to 9.10 (Karmic Koala) on a Dell laptop. Now when I close the laptop lid to suspend and then open it to resume, the audio disappears; have to reboot to get the audio back. I remember having this problem a while ago back on Hardy Heron and finding a kludge to fix it - a line inserted in a shell script that gets invoked on resume
View 9 Replies View RelatedAfter installing Ubuntu Tweaks (that's about all I remember changing) the cursor disappears whenever I hibernate or suspend the laptop. I am running 10.04.1 and have compiz running but changing to less effects seems to have no effect on this problem. when I have no cursor the only thing I can do is restart and it reappears and does fine until I suspend or hibernate. Some hours later - I just found the setting that caused this. The tweak has a box that was clicked to disable the touchpad while typing. This caused the blank cursor when awakened. working now. This shouldn't happen, but I guess this is one to leave alone. Here we go again. cursor disappears after suspend.
View 3 Replies View RelatedMy Suspend and Hibernate buttons disappeared on my laptop.And i can't find a way to restore that I heard that i could restore them with Ubuntu tweak but i can't find how.
View 1 Replies View RelatedWhen I close the lid of my laptop and open it after some time I am greeted with a message "Failed to suspend". When I tried to manually suspend/hibernate, I saw these options are not available there at all. Of course, they did exist when I did the fresh installation but I cant see them anymore. I am totally pissed off with this.
View 1 Replies View RelatedWhen I close the lid of my laptop and open it after some time I am greeted with a message "Failed to suspend". When I tried to manually suspend/hibernate, I saw these options are not available there at all. Of course, they did exist when I did the fresh installation but I cant see them anymore.
View 9 Replies View RelatedI have recently updated my Ubuntu 9.10 install to Ubuntu 10.04 and the default kernel to 2.6.32-23 on my Acer Aspire 5738z laptop with 3 GB RAM and Intel GMA 4500m graphics card.
My problem is sometimes the laptop fails to resume after being Suspended to RAM. The problem is not consistent. Most of the time the system resumes properly but then some times it doesn't . It even doesn't respond to the Magic Keys. I am left with no other alternative but to keep the power button pressed till the laptop shuts down.
I have installed Debian a few days ago and when I close my laptop, it goes to suspend, everything is ok but when I try to awake the screen remains off.
I am using Asus X51RL laptop (made in 2007) and it is NOT a hardware problem, suspend works fine in Windows.
I have installed squeeze on a HP notebook. I have one small problem though.It does not resume from suspend. If I shutdown -> suspend, or close the the lid, or shut downs (suspends) as expected, but whenower it backup up, the screen just stays black.Hibernate is working fine.
output of lspci (if needed)
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
[code]...
I have an Acer 1551 4755, with Debian Squeeze. Normally my Debian Squeeze installations and suspending work fine on my other 2 laptops. For some reason this one is troubled. I can put into sleep with "pm-suspend" or "pm-hibernate" but the thing is that my laptop never wakes up. I endup restarting.
here is the hardware and module list
[URL]
I have a HP laptop with an internal tv-tuner card, which i use once in a while, because i don't have a tv. The problem is, that the kernel module i installed to make this piece of hardware work, for some reason makes my laptop unable to sleep. So if i want to suspend my pc, i have to first unload the module, using
[code]...
I am using ubuntu 9.10 and when i close the lid of the laptop it does not hibernate or suspend?
what do i do?
It looks like something must've slipped the attention of Ubuntu developers as in the previous LTS version laptop suspension after closing the lid worked perfectly fine for me (Dell Latitude D820) while after upgrading to Meerkat it doesn't work any more....well sometimes it does sometimes it doesn't - it behaves sort of like a weather in UK/Ireland ...anyway...is there more information I could provide to you guys or is there something you could give me to point me to the right direction ?
View 3 Replies View RelatedI have a problem with the suspend button (fn+f5) on my hp pavilion dv2000 laptop. It is working but only after an intervention. So, every I boot up my system the short-cut/button is not functioning. In order to make it work I have to open the Power Management Preferences and close them. I don't even need to change anything there. Now the button will be working just fine until the next restart. It's pretty annoying to visit the Power Management after each restart, isn't it. Any ideas how could I fix this?
View 2 Replies View RelatedI like to suspend my laptop when I close the lid. I have squeeze installed. When I open the laptop lid all lights indicated that it coming out of suspend but the monitor stays black. It is worse since I install the ati drivers for the card instead of the xorg. It did it with both but worse with nonfree drivers. I can get it to come out by ctrl alt f2 and the ctrl alt f7. However yesterday that did not work but that was the first time. My laptop is an acer 5251-1513 amd processor v120, and hd 4250 radeon
View 6 Replies View Relatedit is a macbook pro (5,3) running sid.when i am using it, it is cool.however in suspend mode, it gets very hot.i have this running
Code: Select all/etc/init.d/macfanctld status
● macfanctld.service - LSB: Apple MacBook (Pro) fan control daemon
Loaded: loaded (/etc/init.d/macfanctld)
[code]...
I am having problems with my wuxga 1900x1200 laptop display.The machine is a Dell inspiron 8600 with nvidia chipset.I am running driver 175 from the Karmic repo. My problem is when the machine wakes up after a suspend, the display blooms to bright white.The only way I have found to recover is power off the machine. After a bit of research I suspect it may be the refresh rates in xorg.conf, but lowering the values has not changed anything. Here is what I have currently.
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Wed Jan 27 03:02:48 PST 2010[code]....
orig values were horiz 30-128 and vert 50-90.I'm not sure it's the refresh...
My Acer Aspire 7552 laptop is running Debian Testing (just the main repos, no contrib or non-free). For some reason, it takes over five minutes to resume from suspend, and an absurd period to come back from hibernate (well over half an hour). Has anyone encountered this problem before, or have any tips on how to fix it? For the time being, I'm completely powering off every time I close my laptop because it's faster that way.
Output of lspci in case it helps:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
[code]...
I'm running Debian Squeeze on a Dell Studio 1558 laptop, and I have my laptop set to suspend when my lid is closed. Resuming from suspend seems to work but the screen remains blank, forcing me to hard reboot every time. Upon reading this thread
Code:
Tue Jun 21 23:07:12 AKDT 2011: performing suspend
Tue Jun 21 23:07:28 AKDT 2011: Awake.
[code]...
I have run into the following problem, after I installed the proprietary AMD/ATI driver for my videocard I've been unable to wake up my laptop after suspend to RAM, it suspends ok (I guess?) but when I try to wake it up the screen doesn't turn on so I have to manually shut down the laptop.
before installing the proprietary driver, it worked ok
the videocard is a Radeon HD 3200, and the processor is an AMD Turion X2 Mobile