Ubuntu Multimedia :: FM Radio With AverTV Hybrid Volar MAX Not Working?
Jan 13, 2010
I have an AverTV Hybrid Volar MAX.I really would like to get the FM radio tuner working with this on my laptop. When I do 'sudo fmscan' I get the following:ioctl VIDIOCGTUNER: Invalid argumentI have downloaded and installed the drivers from AverMedia's web page (TV is working).This is on a Compaq Laptop (Presario V5305WM) on a fresh install of Jaunty.
View 1 Replies
ADVERTISEMENT
Aug 14, 2011
to set up my usb, digital TV Tuner, an AVerTV Hybrid Volar HD (H830) , to work with MythTV? I note that the 'MythTV backend set-up', only refers TV Tuner cards, not usb sticks. Nevertheless, the link above provides a 'Linux x86' driver for my computer � a .tar.gz file. The link also provides an accompanying text file that asserts 'This package is tested with MythTV against Ubuntu 10.04'. I've recently installed Ubuntu 11.04.The accompanying text gives its pre-requisites as a. support linux kernel 2.6.29 or later. b. make sure /lib/modules/`uname -r`/build exists c. make sure "dvb_frontend.h" exist in your Ubuntu. d. kernel modules dependency: videodev, video buf-core, v4l2-common.
For (b), my computer shows the following path /lib/modules/2.6.38-10-generic/build$ I'm note sure what (c) means with 'in your Ubuntu' Needless to say, its later instruction doesn't work Install driver to system sudo ./xxx_LinuxDrv_x86_vxxx-beta_Install.sh I'm told that this 'command not found'
View 1 Replies
View Related
Jan 29, 2011
Avermedia AverTV volar GO is a pure analog External USB TV tuner device. I recently purchased it and struggling to get it working on Ubuntu 10.10. Ubuntu detects the card , as we can see it from lsusb, but tvtime doesn't find any /dev/video0 device. Also there is no mention about the device in dmesg. I had mailed Avermedia enquiring Linux support. However , they replied that they donot have Linux driver for this model. Is there any way we can get this work on Ubuntu.??
[Code]...
View 4 Replies
View Related
Jan 29, 2010
I've a new HDTV card: Avermedia AverTv Digi Volar Ex( DBT-T, USB 2.0). Has any been able to use it with OpenSuse 11.2? Is there an easy way to configure it? I've tried with yast, but nothing.
View 8 Replies
View Related
Apr 5, 2011
I am running Debian Squeeze stable on a bare atom board. Only yesterday I installed an analog PCI TV tuner (AverTV Super 009). But I am unable to tune any TV/FM channel. Is it that the stock squeeze kernel doesn't have driver for this particular card? Or I'm missing some bits in configuration? Do I need to upgrade kernel (is any later kernel available in backports)? Here is some info that you may require:
[Code]...
View 4 Replies
View Related
Jun 30, 2011
I am wondering if any in the Ubuntu community owns a Carmen Car Radio player by Livio Radio. The program to save internet radio to the device is written in Java, however I am not able to run it either using WINE or using Open JDK.
The Carmen Player does work well with Banshee, it is the internet radio that is not working.
View 1 Replies
View Related
May 1, 2010
I have a new install of Karmic on my system with a flyvideo 3000 tv card installed. My problem is that it doesn't find any radio channels and the input channel is completely wrong. I don't have any sound on gnomeradio and can't find the config files to change the input channel. The only input option available to me is dig1 - can anyone point me in the right direction?
I have already read the Howto for this tv card and changed the device to radio0 in the setup. I have setup tvtime perfectly with sound channel as well as with a 5.1 surround configuration. I am missing my favourite radio channel. and I want to get rid of my windows installations once and for all! Update: I did a system update and some things have changed: the radio tower graphic on gnomeradio is now green (I assume it is getting a signal) but no sound yet.
View 2 Replies
View Related
Feb 23, 2011
I've tried to contact the BBC on this but they cleverly seem to have made this impossible ! Does anyone know if there is a none Microsoft feed for radio 4, I have all my radio stations set up and working using Rhythmbox but cannot listen to radio 4 as it's a mms feed.
View 8 Replies
View Related
Jan 17, 2010
I installed mythbuntu 9.10 this week on some old hardware, I had a Hauppauge 500MCE PVR in and made it work fairly easy. I'm used to gentoo
However, I want to record HD signal, so I plugged in a Eyetv hybrid and followed this guide url.
I extracted the driver, put it in into /lib/firmware, modprobed em28xx, rebooted. When I plug in the device, it is not recognised. I tried both usb ports. The ID is "0fd9:0018", which is somewhat different from similar hardware e.g. Hauppauge wintv-hvr-950 (ID 2040:6513 url.
I think the hardware has been updated, hope someone knows how to crack this one
I have added some additional information below!
# uname -a
Quote:
Linux m 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 i686 GNU/Linux
# lsmod | egrep -R "video|em|video|v4l"
Quote:
em28xx 80968 0
ir_common 48512 1 em28xx
videobuf_vmalloc 6496 1 em28xx
videobuf_core 17952 2 em28xx,videobuf_vmalloc
v4l2_common 17500 6 em28xx,wm8775,tuner,cx25840,ivtv,cx2341x
code.....
View 4 Replies
View Related
Sep 1, 2011
Does anybody use USB HDTV (digital or hybrid) tuner ?
1) does teletext work in digital TV ?
- Do teletext pages appear immediately after page numbers entering or
- must you wait every time because of counter rewinding ?
2) Does analog FM radio (88 - 108 MHz) work in that kind tuners ?
View 5 Replies
View Related
Jan 30, 2009
This week I picked up a Dell Studio Hybrid and installed CentOS on it. I originally used 5.0 since I already had the DVD and the network card wasn't recognized at all (lspci recognized it but the card didn't show up in system-config-network). I then downloaded the 5.2 DVD and installed that. The network card then showed up in system-config-network but it still didn't work. If DHCP is enabled it tells me that no link is present, and if I manually configure it, I still can't ping the router. lspci reports the following about the network card:
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
The driver used is r8169.
I put Fedora 10 on it and the network is working fine, but I'd rather run CentOS on this machine. Is the issue likely to be fixed with CentOS 5.3 or should I just stick with Fedora?
View 11 Replies
View Related
Dec 30, 2010
Is it possible (without too much difficulty) to have an Openbox/Gnome desktop?
Since Gnome is a full desktop environment and Openbox is only a Window Manager.
Use the Gnome DE and have Openbox WM, instead of Metacity or Compiz? (with Ob Config & Menu included)
I know it won't be near as light as a straight Openbox, but it would add Ob convenience to Gnome DE. What do you think? Work-arounds?
On a small partition I have LinuxMintDebian 'testing' (Gnome) x64 ... can I 'add' Openbox? Not replacing anything except the WM?
View 2 Replies
View Related
Apr 2, 2010
I am also new to ubuntu but have manage so far,except for my tv-card. Seems like Metv and kaffeine cant see the tv-card ?! I have a asus mycinema-p7131 hybrid,does someone have info on installing this ? except for this i think ubuntu 10 is great.
View 1 Replies
View Related
Apr 16, 2010
On both Karmic Koala as well as Lucid Lynx, I am having massive problems getting my nvidia card to register properly. I am on an Acer Aspire 5953 laptop pc with a Gt130m discrete GPU in a hybrid installation with an onboard GPU.Freshly installed, both 9.10 and 10.04 runs smoothly, I can enable desktop effects, I can even see the screensavers that run openGL - although they run laggily in fullscreen, since they're obviously using the onboard, and very weak, GPU.The problem however, appears whenever I install the suggested NVIDIA drivers that Ubuntu finds for me - after doing this, I am asked to reboot the system and on both systems, I am treated to a black screen, instead of a login-screen. The only way to get the system up and running again, I have found, is boot in fail safe mode and edit /etc/X11/xorg.conf, erasing everything. This lets me boot back up in a regular mode.
When I check the logs, both the onboard GPU and the gt130m GPU is located, the onboard as PCI:0:0:2:0 and the nvidia gt130m discrete gpu as PCI:0:1:0:0 - I have tried adding BusID: ("PCI:0:1:0:0") to the xorg.conf, too, to no avail. I am continously treated to the black screen (a flicker at most) and the logs always tells me that no xserver could find no screens.So far, I have only been installing Ubuntu inside windows - I am hesitating to install on a fresh drive, since I am afraid of the nvidia black screen putting me in a position where I can't access the system. Is it possible that the fact that I install ubuntu inside windows might somehow affect Linux's capability of accessing my discrete GPU?
View 2 Replies
View Related
May 29, 2011
I'm trying to get my mom to switch to ubuntu, and she needs this one radio stream to work. For the life of me, I can't get this radio stream to play on any player. here's the web address to it, and the mms address:
[URL]
It's proprietary to windows which sucks, but I've followed a lot of forums where asx streams work. This one just doesn't
I'm on 11.04. I've tried VLC, Banshee, Rhythmbox, xine,gstreamer, etc.
View 6 Replies
View Related
Jun 18, 2011
I am unable to play any radio streams such as those found at www.jazz24.org and [URL]
When I click on them, whether trying to use their "player" or (in case of jazz24) clicking on "mp3 stream" ... the result is simply crashing the browser, whether firefox or chrome. If I click the mp3 stream, banshee opens with an hourglass-type icon but doesn't do anything.
My local music files play fine on Banshee and I CAN listen to streaming baseball on mlb.com (which is a Flash-based player).
I have Lucid 64 bit. For some reason, I feel like these radio stations used to work, though I can't pinpoint when they stopped working. Can it be that the entire world of internet radio is closed to me on Linux? For some reason i doubt it, there must be something I'm doing wrong here?
View 5 Replies
View Related
Dec 8, 2010
record my radio show from a radio I have plugged into my iMac. That's right. For now, I am dual booting on my iMac until I can afford to buy a dedicated PC desktop just for Ubuntu.
I can't believe that there seems to be no way for me to record my shows from my radio. Works fine when I boot into the Mac side and even when I use Ubuntu using VMware Fusion. When I boot into Ubuntu directly, Audio In in the Sound preferences doesn't seem to work. No audio coming through when I try to record from the radio.
View 2 Replies
View Related
Jan 26, 2010
Ubuntu 9.10
Rhythmbox 0.12.5
How does a person determine the URL of the audio stream for a Live365 broadcast in order to create a new radio station entry in Rhythmbox? I would like to be able to access and listen to the audio stream completely from within Rhythmbox.
View 4 Replies
View Related
Feb 27, 2010
I want to stream a radio station that uses .cfm . I've tried a lot of options but without success. Anyone have experience with cfm?
I can stream other stations using vlc media player and even Adobe flash player. But no success with this cfm stream.
View 2 Replies
View Related
May 10, 2010
I've recently purchased HP Mini 210 (about a few months ago) which has wireless accessibility. Unfortunately, internet is not easily accessible from where I live unless you have a home connection (which is quite expensive) or you connect to a Cyber Cafe (not really convenient). I've checked some really good tools like FM Radio and Rhythmbox which require internet in order to stream radio stations directly.I'm quite fond of FM Radio, though recently an old radio broke down and I thought a netbook could help (although I admit I bought the netbook for writing scripts and stories solely). Although it's funny that an old technology can do what's it's meant to do, while a newer one (PC's) depend on internet alone.
What I was wondering is that since HP Mini 210 has a wireless access capability isn't it capable of catching FM Radio waves like an old radio without depending on internet connectivity? If it is capable of it, how do I do that?
View 2 Replies
View Related
May 26, 2010
how can i stream a new radio channel that uses mms example :[URL]
View 2 Replies
View Related
May 29, 2010
this media player is not playing [URL]I have played other internet radio and tv stations through vlc but this one doesn't seem like i am supposed to play it through vlc?
View 2 Replies
View Related
Oct 18, 2010
Anyone know how I can play a .wax radio station on ubuntu. The link I have is:URL...I don't think this is possible based on some research but find it hard to believe and do not understand why.
View 5 Replies
View Related
Nov 8, 2010
Dear community, I am using the version 10.04 LTS of Ubuntu. I want to listen to an internet radio station, which I can listen without a problem in Windows. However, in Ubuntu nothing happens when I click the link. The URL of the radio station is [URL]. The link which starts the streaming has the words "RADIO EN VIVO".
View 1 Replies
View Related
Nov 29, 2010
How can I add this Internet radio station to Rhythmbox?
Heres the link: [url]
I have tried to do it myself, but fail. It just won't work!
View 2 Replies
View Related
Dec 10, 2010
I was playing around with Screenlets and would like to use the radio. I can't seem to get it to play any of the default radio stations, also when I add a custom web site I get nothing. The web site I added plays fine with Mplayer, but does not work with the Screenlets radio. I have also edited the Menu.xml for screenlets radio and added the web site I would like to listen to, but nothing. I have also downloaded he restricted extras
View 2 Replies
View Related
Feb 1, 2011
I am using VLC to listen to a radio stream online. It works ok, but always takes ~2min to actually connect to the stream. I opened VLC up via a terminal and got the following output:Quote:
natman@flame:~$ vlc
VLC media player 1.1.4 The Luggage (revision exported)
Blocked: call to unsetenv("DBUS_ACTIVATION_ADDRESS")
[code]....
View 1 Replies
View Related
Aug 10, 2011
I am seemingly having a problem with the command "vlc://quit". I have an .sh file which accesses a streaming url. If I leave "vlc://quit" in the .sh file it executes immediately - i.e. supposedly goes through all the preceding commands but closes down (quits) before anything happens. If I take it out everything is fine ( vlc opens, finds, plays/records & stops). But, of course, I'm left with vlc still open.
View 4 Replies
View Related
Mar 11, 2010
I get the following error when I try to play my local radio station via firefox with Kubuntu 9.10:
Firefox doesn't know how to open this address, because the protocol (mms) isn't associated with any program.
I have Flash, and the Gecko Media Player plugins installed.
how i can get this to work? Im working third shift and its so silent it is deafening, i could use a hero
View 3 Replies
View Related
Mar 24, 2010
I used to be able to listen to live Internet radio (Classic fm and Chill) but no longer. The podcasts of these stations activate Mplayer but not the live stations
View 1 Replies
View Related