Ubuntu Multimedia :: Nvidia Drivers Result In Black Screen - Hybrid GPU
Apr 16, 2010
On both Karmic Koala as well as Lucid Lynx, I am having massive problems getting my nvidia card to register properly. I am on an Acer Aspire 5953 laptop pc with a Gt130m discrete GPU in a hybrid installation with an onboard GPU.Freshly installed, both 9.10 and 10.04 runs smoothly, I can enable desktop effects, I can even see the screensavers that run openGL - although they run laggily in fullscreen, since they're obviously using the onboard, and very weak, GPU.The problem however, appears whenever I install the suggested NVIDIA drivers that Ubuntu finds for me - after doing this, I am asked to reboot the system and on both systems, I am treated to a black screen, instead of a login-screen. The only way to get the system up and running again, I have found, is boot in fail safe mode and edit /etc/X11/xorg.conf, erasing everything. This lets me boot back up in a regular mode.
When I check the logs, both the onboard GPU and the gt130m GPU is located, the onboard as PCI:0:0:2:0 and the nvidia gt130m discrete gpu as PCI:0:1:0:0 - I have tried adding BusID: ("PCI:0:1:0:0") to the xorg.conf, too, to no avail. I am continously treated to the black screen (a flicker at most) and the logs always tells me that no xserver could find no screens.So far, I have only been installing Ubuntu inside windows - I am hesitating to install on a fresh drive, since I am afraid of the nvidia black screen putting me in a position where I can't access the system. Is it possible that the fact that I install ubuntu inside windows might somehow affect Linux's capability of accessing my discrete GPU?
I have Asus N61jv laptop with optimus, and i use ubuntu 5-6 months, i know that i can't use my nvidia graphic card, today ubuntu offered to install nvidia drivers and I accidentally clicked, after restart i see only black screen, can someone explain me how to get back to a previous state, i found some topic with this solution "except booting to a live cd and disabling gdm.". How can i fix this problem, i have important data on ubuntu?
I have scoured the web the last few hours and I have come across a plethora of similar problems relating to Ubuntu and Nvidia drivers. However, I still havent found a sufficient cure for the problem.
The exact problem I face is that as soon as I install the Nvidia recommended drivers using the "Hardware Driver Manager", I restart the system but it never gets past the login splash screen. After I log in it simply goes to a black screen and sits like this indefinately.
Does anyone know of a particular fix for this problem? I am at the end of my tether and there is no way I can use Linux if it means either getting a different graphics driver or sitting on a 800*600 resolution. (Not to mention I dont have acclerated 3d support...so no DVD playing!)
I have a Nvidia GeForce4 MX graphics card and im a complete n00b to Linx so please go easy on the technical jargon.
I have an problem with login in to a fresh installed Ubuntu with the nvidia drivers (graphics card nvidia 210). So far I have installed Ubuntu 10.04, Ubuntu 10.10 and Unbuntu 11.04, they all seem to have the same problem. when I log in the screen goes black and the pc's hangs. I can switch to a terminal before I login and everything seems operational. I can login to Ubuntu with a fail save x session.
The new NVIDIA drivers don't seem to work as seamlessly as back in Jaunty and before. In Lucid when I activated the drivers I had to do some grub tweaks to make my splash look normal... But with Maverick it is even more messed up...
Problem: The splash either doesn't appear at all (black screen) or it appears in the text format rather than graphics... In some instances it even hopelessly tried to load the graphics splash - loaded the background but the instead of Ubuntu logo and the progress-bar animation it displayed a "Ubuntu 10.10" in a monospace font.
I am using the actual "testing", Debian works in version 5 on my notebook (or at least starts), but I can't use it b/c I have too much new hardware what is already implemented in the testint Version. I already had debian 6 running but that wasn't the good way to do it.
I have an Alienware m17x R1, with a q9000, a nivida mobile 260gtx. I know that the Problem the basic Debian Driver for Nvidia cards is. It is enough if I can use at least the command line of Debian to install an actual Nvidida driver and get the system running. But that's not possible!
I solved it once, with plugging in an External Monitor to my Notebook, but I don't have one at home at the moment and honestly there must be a better way for. How to "let debian 6. use the Notebook Screen"?
Although I managed fairly quickly to get 3D enabled on the GF 7600GS of my desktop, it took me longer to get 3D up on the GF 9650M GT of my Asus laptop M70Vn. Although I made extensive use of the numerous procedures outlined here, none of them worked and booting my laptop always ended up with me facing a jet-black screen and a completely inexpressive blinking white cursor. My solution was simple: I did not blacklist Nouveau and problems mysteriously disappeared.
I have a laptop and desktop both with basic installations of 9.10 (Karmic). And, they are networked with a Mac running OS X 10.6.2. Screen sharing simply worked right from the beginning, to and from the Mac, and of course to and from both Ubuntu installs.
Except there was no feedback from one Ubuntu desktop screen being shared. Mouse clicks, mouse movements, and keyboard presses all seemed to have their correct effects. It was just that the results were not fed back to the remote screen.
During troubleshooting, I de-activated (removed) the nVidia accelerated graphics driver (version 185) that had been installed with 9.10 (Karmic). Then screen sharing started to work with the proper feedback to the remote screen.
I tried the pre-upgrade nVidia driver (version 173) and again no feedback from the screen being shared. De-activate the driver and again screen sharing started to work with feedback.
The bottom line seems to be no nVidia proprietary drivers if I want remote screen sharing to work. But this desktop is primarily used as a HTPC with a HDTV monitor. No games. No 3D. Screen sharing is probably more important, but essentially what am I giving up in graphics capabilities by not using those nVidia drivers?
I had Ubuntu 10.04 running fine. Then I got curious about NVIDIA XServer.
"ATI Technologies Inc RV380 [Radeon X600 (PCIE)]" - Video Card
I opened it up, clicked a settings change, and said OK. It said you need to update your blah blah blah. Then it said blah blah blah doesn't exist. Then it said it would create it for me. Then I said REBOOT!
Now I get a black screen of death.
The only way I can get anything to happen on my monitor that comes from this computer is to boot into the Install Disk and say "TRY UBUNTU".
I have installed Ubuntu Maverick 10.10 RC in my PC, everything works fine, but after install Nvidia proprietary Graphics driver it boot up on a blank screen (I can hear the login sounds, etc) but screen is absolutely black.
I try to login in recovery mode and check if something is wrong but nothing happens (even adding noveau driver to a blacklist (editing grub)) Now I have re installed Ubuntu 10.04.1 and works fine but I would like to install the 10.10 version, since I have this inconvenience, I cant do it.
My graphic card: Nvidia Gforce 8400GS 256MB Pci Express
It seems the latest nvidia drivers (255.44) don't seem to work on my Lenovo Thinkpad T61 in Lucid. Has anybody gotten it to work? I've tried to just use the System -> Drivers control panel to install and activate the current nvidia drivers as well as installing it from the command line. However, when I reboot, I see the nvidia splash screen come up for a second, then the screen goes blank, and then the nvidia splash screen pops up again, and then the screen goes blank again, over and over. It seems to be in some kind of infinite initialization loop. My T61 has the nvidia NVS 140m chipset. This is frustrating since the previous drivers seemed to work ok. When I try to revert to older drivers, it complains now that they're no longer compatible with the latest kernel headers, etc. I've had to boot up into the failsafe graphics mode to be able to use the laptop.
I know there are a lot of threads out there for same or similar issues, but nothing I found was working for me until, by sheer chance, I found this very simple solution on the Fedora forums. Too elegant not to share.Environment:Ubuntu 10.10nVidia GeForce 5500Samsung SyncMaster 225BWUsing DVI cable (in case it matters)Issue:After installing the proprietary nVidia drivers, the screen resolution was no longer the correct native resolution of the display. In my case specifically, the nVidia X Server Settings utility was detecting the maximum supported screen resolution was 1280x1024 while my display's native resolution is 1680x1050.Solution:Open a Terminal window.Make a backup copy of the original xorg.conf file. This is just good form any time you are making config file customizations.
Code: sudo cp -p /etc/X11/xorg.conf /etc/X11/xorg.conf_backup Open 'xorg.conf' in a text editor.
I have been using ubuntu for quite a long time, and for the first time, I am now unable to set nvidia drivers to work. I have just install ubuntu 9.10 amd64 on an AMD 64 athlong X2 with a GEForce 6500 nvidia card.
The only reason I need the proprietary drivers is to use two monitors.
I am going crazy, I have tested everything I have found on the web. I have tried all the nvidia drivers version, I have tried envyng, ... but nvidia do not work!!
I am trying Xinerama with nv, but it does not work either!!!
Here is my xorg.conf file in which I have tried to use nv driver to set dual monitor. X fails to load and it says that screen 0 is deleted, that devices are found but there are no matches in the config file. Any clue?
decided recently to try a new Fedora (15) on my desktop computer with old GF6200 TurboCache (64MB physical memory). Installation was pretty easy, however the screen was full of artifacts on default driver (Nouveau). Therefore installed nvidia drivers following this guide [URL]. It seemed to be working... until I opened more than 5/6 windows - every new window was appearing black. Resizing the window helps but it looks like the total display area is limited (memory problem?) - I can downsize the visible windows to give more resources for the new one. Played with nvidia-config for some time without any luck. Google showed me I was not alone with this problem - [URL]. However no solution is apparently available yet. Let's start with some debug information:
I have openSUSE 11.3 with an nvidia card connected with two monitors. In the past I used xinerama which was ok, but now I need to have two separate desktops, one on each screen. I set the nvidia driver with x screen, and now one screen works perfect and the other only shows a black screen. When I move the mouse over the black screen, the mouse pointer turns into an X, but moves correctly, which seems to me that the problem is that I need to set the second desktop to that screen. I looked on forums on how to do so, and no luck.
I was trying to install the propertiary drives for my nvidia geforce 105m.I blacklisted noveau and installed them from the hardware drivers window. Restarted selected ubuntu from grub and it started like normal. Got the splash screen with the dots but there were green dots all around the words and dots.The dots started changing there color grom orange to white but then that is where the trouble starts. After like 3 or 4 dots the whole screen just goes black with no black light. Any help this is kind of urgent. Is there anyway to get it back to my normal ubuntu or at least get it back my programs and stuff. I try the alt+ctrl+f3 but that doesnt do anything.
When I start ubuntu I get a black screen, I can't do anything, this started when I installed the new driver for my graphics card. I don't know what to do. I have a i7 core (64-bit) and nvidia GTX 260 (twice).
After installing Ubuntu and seeing my resolution would only go to 800 x 600, I found this strange. A message popped up about the nVidia drivers I could downlaod that would enable me to do more so I did. I restarted and all was fine. Nice effects, high resolution. However, after going on XP, then going onto Ubuntu, the screen ahs gone black. The white Ubuntu logo can be seen for a while as it loads, but then the monitor goes completely blank as I hear the sound when the log-in screen appears.As I said in my title, it was the 185 driver
I installed Karmic and the resolution was lower than I expected. I went to Admin and Drivers and the system stated I needed to activate the Nvidia driver. I did this and the system asked for a reboot.Now after Grub I get a black screen. I can hear things going on in the background and can even guess when to input my password, but all I see is a black screen.
I've been using ubuntu fine for a while when I decide to activate my nvidia graphics card.After rebooting, however, I hit nothing but a black screen. I've searched the nets and others have seemed to solve the problem after hitting alt+ctrl+f1/f2 and editing some files after that, but that doesn't work for me. Booting into recover console gives me nothing but a long stream of white words before it runs to --> done. and then it goes back to a black screen. Running from Live CD I can't access my ubuntu files.
After having a lot of trouble with vista and no chance of getting Windows 7 anytime soon, I decided to get Ubuntu and use dual booting with vista. I had recently installed it about two days ago and for the most part it worked pretty well. That is until I installed the driver for my video card, an ATI Radeon HD2600 pro, then things went down hill for me. Every time I try and boot Ubuntu it now goes to a black screen after the logo comes up and i am unable to do anything. I have tried to look up some solutions, but I am still relatively new to programing and some of this stuff seems a bit complicated for me. Is there a simple solution to this that does not require a reinstall?
I'm a little new to ubuntu. I installed a video driver and after restarting I got as far as the login screen where I saw that the driver did not work: screen is mostly black with random bars of color. I was only able to restart in recovery mode mode. I tried the fix graphics option, which did not work and also some commands that I've seen posted in other threads. So far, still cannot delete the problematic driver or boot up normally successfully.
Was trying to play some new games, so was trying to install the ati drivers for my x15xx or something card.
anyway i am using ubuntu 10.10, so was having to try force them, using 9.10 config or something.
anyway got it installed, restarted and I get black screen have been trying to go back to "vesa" drivers or something. but been having no luck
I do not have a "/etc/X11/xorg.conf". and I cannot seam to make 1 using stuff like aticonifig --initial --input=/etc/X11/xorg.cong or anything like that
I am really stuck, even using dpkg-reconfigure or something didnt make the X11 conf
I just did an update of my Fedora 11 machine, and it required a restart. After restart it will not try to boot up or even show a splash screen. The only thing I see is a black screen with a flashing white cursor.Any ideas on what I can check so I can boot up into Linux again.
I just installed Maverick on my HP tx1000. Jockey offered me two drivers for my NVidia Go 6150. I tried the recommended one--and it seemed to be working. It had a green light next to it in Jockey, Compiz worked, etc. Then I rebooted.
Except it didn't reboot--the disk thrashed for a while, and then I was met with a black screen. I tried recovery mode and got a bash prompt...which crashed when I ran `startx'. Then I tried Failsafe X, which did work. After some experimentation, I realized it was the Nvidia driver at fault, so I tried the not-recommended one, which didn't work, and now I've disabled both of them. But isn't there a proper driver for me to use? IIRC, I was using a restricted one with Lucid, and it was working all right.
Fun fact: The day before I installed Maverick, Windows 7 randomly decided to not boot all the way. It would show the splash screen, and then hang with a black screen too. But it works in Safe Mode. And had been working fine for a while beforehand. There must be demons in my graphics card.
NVidia FX5200: nvidia-glx-173xxx The problem is that, when I install it, upon rebooting, I get a black screen with one blinking underscore at the top left corner. I somehow managed to get into the console and .. there's something wrong with the video card driver ( no way I could catch it into a picture ).
This was the exact reason why my Fedora CD was laying on the corner for months - I remember having this issue earlier as well.
Is there a way to fix it or at least, recover from a broken video card driver ?
Recently I upgrade to the latest Nvidia driver for Linux. I checked that it was compatible with my Ubuntu 10.04 x64 system and my geforce gt 220 graphics card. I decided to go with the newest beta ver 260.1904. Installation went well, better actually than other times I tried to install the newest driver from their site. After installation was finished I restarted and let my system load up. As soon as it got past the ubuntu logo, the screen just went blank as if there was no signal.
I determined that everything but the display was working. When I pressed ctrl-alt-F1 the numlock light turned off (this usually happens) and was still toggle-able. When I went through the other x-servers (ctrl-alt-(F2-F6)) the light went out but could be turned off and on by hitting numlock. When booting in from recovery mode, the screen displayed up to the point where it would show recovery options with no noticeable error showing before the screen turned off. This is what worries me the most.I don't think it is my Xorg.conf because I replaced with a backup and still have the same problem.Does anyone have any ideas about why this is happening or how I can at least see the terminal. As a side note, its definitely not the card because the card worked fine before, works in windows and live cds, and I tried with an older nvidia card and had the same problem.
