Ubuntu :: Lifeview Hybrid FlyDVB-t / Can't See It On The Lspci Output?
Jul 7, 2010
I am currently trying to make a Lifeview Hybrid flyDVB-t tv tuner work on Ubuntu Lucid. The problem is that I can't even see it on the lspci output, here it is:
Code:
$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
code....
I don't know what else to do, and I've been looking for a lot of time online.
View 2 Replies
ADVERTISEMENT
Mar 25, 2011
I want to take the output from lspci | grep VGA and grab the BusID's of each video card installed on a server. I then want to take these BusID's and convert them to decimal (Which I can do fine). I then want to take these numbers and have them as the input of a few perl search and replace commands for xorg.conf. I'm mostly stuck on trying to get each BusID that is outputted from lspci and using them as inputs (or variables).
View 1 Replies
View Related
Mar 24, 2011
i love linux, everything 'bout it, and i'll gladly switch to it, but I have only one little problem. On windows i usually watch tv on my computer (and i play my xbox 360 too ) using a LifeView 3000 TvTuner.
View 1 Replies
View Related
Nov 29, 2010
I'm having trouble getting my LifeView/Typhoon FlyVIDEO2000 tuner to work. tvtime just locks up my computer.
View 1 Replies
View Related
Mar 7, 2010
what is the lsusb equivalent of lspci -k?
View 1 Replies
View Related
May 8, 2010
Ubuntu 10.04 fresh install 64bit. Wireless was working in 9.10, now does not even show up in restricted drivers. Installed bcwl-kernel-source, and b43-fwcutter. ifconfig, iwconfig only show eth0 and lo - no wlan
Other restricted drivers show up - using NVIDIA driver with Compiz running better than ever on 2 screens
Here is the output from the collectNWData script found at [url]
I do notice that in the firmware section that both b43 and b43legacy are listed. Somewhere I reads that I should be using b43 - not the legacy version. Should it be blacklisted?
View 1 Replies
View Related
Jun 23, 2010
I a m using a logitech c250 and it works perfectly on ekiga when i use ekiga i get video and the little green indicator turns on but I really want to use the webcam for stickam and the minute i turn Ekiga off the indicator goes grey and it stopps working i've used to codes, lsusb and lspci to detect my webcam and it they worked but my problem still isnt fixed.
View 4 Replies
View Related
Jun 11, 2010
I am running ubuntu 10.04 with the fglrx driver installed with apt-get. I have an ATI Radeon HD AGP with 512MB of video ram. My bios window size is 64MB. The Xorg.0.log file shows that 512MB is recognized. I also tried checking the /proc/mtrr file and it shows two values one I believe is my ram size which looks to be correct at 1.5GB the other is 512MB which I think is my video ram size, but when I do an lspci -v the video ram size shows 256MB. I am trying to run Doom 3 and it only allows me to use 256MB of memory.
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-25-server i686 Ubuntu
Current Operating System: Linux Merlin 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=b72f83f8-a868-4098-9d87-2a082f698167 ro quiet splash
Build Date: 23 April 2010 05:11:50PM .....
View 2 Replies
View Related
Jul 7, 2010
I installed a secondary Nvidia GeForce7300GS 256 PCIe video card in an ASROCK ION 330 motherboard. The idea is to provide an S-video output. The interesting bit is that lspci shows only one of the two cards. If I set the ION video adaptor primary in BIOS, then lspci will detect only ION, if I set the PCIe video card then lspci will detect the GeForce 7300GS. I'd like to write my own xorg.conf, but how can I refer to drivers without the pci bus address?
View 2 Replies
View Related
Apr 4, 2011
I have had on and off problems with my sound for quite some time now. Each time it would stop working, I would find a fix which would work for a month or so, then I would go back to having no sound. I have had consistent sound on my Windows partition, so I don't think something is wrong with the hardware. The first fix I used was using "sudo alsa force-reload" to get ALSA working again. The latest fix I used was to add the line "options snd-hda-intel model=toshiba" to alsa-base.conf, which worked up until now. My built-in computer speakers won't make any sound, nor will my external monitors when they are plugged into the headphone jack. I do get sound when I plug in a pair of USB headphones.
I have tried using the Comprehensive Sound Problem Solution Guide [url], but I run into a predicament...
aplay -l (with or without being root) gives...
Code:
Code:
Alsamixer isn't much help either. It shows the name of my card in the top left, but there are no sliders to adjust.
I've tried compiling the modules from source, reinstalling through Synaptic, and plenty of other things, to no avail. Ubuntu 10.04 on a Toshiba Satellite U305-S5107
View 9 Replies
View Related
Mar 15, 2011
Is there any way to list all PCI devices apart from the obvious lspci command? In other words what is an alternative to lspci....
View 1 Replies
View Related
Jan 4, 2010
Joined the Linux community last week with a clean install of Ubuntu 9.10 and the Edubuntu overlay onto my wiped Dell Inspiron 8000 with 512MB RAM (max allowed) and nVidia GEForce2 GO video card. <<lspci: 00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82815 815 Chipset AGP Bridge (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 02)
00:1f.0 ISA bridge: Intel Corporation 82801BAM ISA Bridge (LPC) (rev 02)
[code]....
View 3 Replies
View Related
Mar 29, 2010
I have installed a secondary Ethernet card, rebooted, but found no eth1 interface. The output of: lspci | grep Ethernet
View 3 Replies
View Related
Mar 17, 2010
When attempting to use my ircd, I am receiving the following message in irrsi:
Code:
-!- Irssi: Looking up 127.0.0.1
-!- Irssi: Connecting to 127.0.0.1 [127.0.0.1] port 6667
-!- Irssi: Connection to 127.0.0.1 established
-!- Irssi: !hybrid7.debian.local *** Looking up your hostname...
[Code]....
View 2 Replies
View Related
Mar 13, 2011
My laptop is supposed to have a 802.11 a/b/g/n wireless network card, but I can't find it. I've run lspci -nn without seeing anything containing. 802.11 in the output. Moreover, when I look into hardinfo->network->interfaces I only find the wired connection. Could anyone please tell me if these programs find all devices or if there could still be a wireless card here?
View 3 Replies
View Related
Jul 20, 2010
I have been administering linux systems for years now, but usually they are commodity boxes and as a result I rarely have driver problems, short of needing to install some "restricted" or "proprietary" driver package, or manually installing the nvidia binary drivers back in the day. However, one question to which I have never picked up a straight answer regards common troubleshooting practice. Will lsusb and lspci list device for which a system has no drivers (kernel modules)? I am trying to install a webcam on a SiS-chipset laptop and though I can see a physical webcam, neither lsusb or lspci are showing me that any webcam-like device exists. What I want to know is if it would show anything, or if it needs drivers in order to show a device?
View 4 Replies
View Related
Sep 12, 2010
I've been trying very unsuccessfully to get lm-sensors to work with my Asus P7P55D-E Deluxe Hybrid motherboard. It sports an Intel i7 Quadcore processor. Here is a link to everything that is in the computer:[URL]..Pretty much I'd like to do the sensors and get the turbo-v working. Does anyone know how to do this? The important thing is the sensors. I'm running Ubuntu 9.10 (10.4 had to many bugs at present).
View 3 Replies
View Related
Jul 30, 2011
Ok so I have found the help doc in the ubuntu community spot and it says to run the following command,
Code:
grep -i switcheroo /boot/config-2.6.*
And I do that and nothing happend, so i though ok maybe i missed something and moved to the next step to see if the switch file is there and I do,
Code:
ls -l /sys/kernel/debug/vgaswitcheroo/switch
Says the file can not be found, and according to the post on the community help spot VGA_Swicheroo is not enabled, well my problem is how do i enable it and use it?
View 2 Replies
View Related
Jan 11, 2010
I can not get my usb dvb-t sick working. It is a hauppauge WinTV-HVR 900 hybrid TV stick.
The number on the backside is: M/R: 65018/BC20 Some time ago I read somewhere that this model was supposed to work with ubuntu 9.10. [URL] it is possible to make it work since the poster appears to be using the same model as I do.But I still have trouble setting it up.
View 1 Replies
View Related
Feb 25, 2011
There is no sound card listed in "lspci" and also I receive this error when I use dmesg command:
[15.012010] AC'97 0 does not respond - RESET
[15.012017] AC'97 0 access is not valid [0xffffffff], removing mixer.
[15.012024] Unable to initialize codec #0
View 2 Replies
View Related
Jan 17, 2010
I installed mythbuntu 9.10 this week on some old hardware, I had a Hauppauge 500MCE PVR in and made it work fairly easy. I'm used to gentoo
However, I want to record HD signal, so I plugged in a Eyetv hybrid and followed this guide url.
I extracted the driver, put it in into /lib/firmware, modprobed em28xx, rebooted. When I plug in the device, it is not recognised. I tried both usb ports. The ID is "0fd9:0018", which is somewhat different from similar hardware e.g. Hauppauge wintv-hvr-950 (ID 2040:6513 url.
I think the hardware has been updated, hope someone knows how to crack this one
I have added some additional information below!
# uname -a
Quote:
Linux m 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 i686 GNU/Linux
# lsmod | egrep -R "video|em|video|v4l"
Quote:
em28xx 80968 0
ir_common 48512 1 em28xx
videobuf_vmalloc 6496 1 em28xx
videobuf_core 17952 2 em28xx,videobuf_vmalloc
v4l2_common 17500 6 em28xx,wm8775,tuner,cx25840,ivtv,cx2341x
code.....
View 4 Replies
View Related
Sep 1, 2011
Does anybody use USB HDTV (digital or hybrid) tuner ?
1) does teletext work in digital TV ?
- Do teletext pages appear immediately after page numbers entering or
- must you wait every time because of counter rewinding ?
2) Does analog FM radio (88 - 108 MHz) work in that kind tuners ?
View 5 Replies
View Related
Jun 26, 2015
I've got a task: make time server, that gets time from gps, shows it on display and send to different systems through different ports like com, ltp, etc.
Solution is qt program, included in hybrid iso image.
I've created my binary-hybrid.iso debian, added my program and installed it on pc sudo dd if=/media/cdrom/binary-hybrid.iso of=/dev/sda then i restarted and everything is ok, but...
I also need:
1) to make my pc works as ntp-server, to do this i must change file ntp.conf in ntp****.deb before i build my iso
how can i do this?
as i realized according to live.debian.net/manual it's possible to do by putting smth to /live-build/config/packages.chroot and by adding some parameters to lb config but i can't find how and what
2) to save my program parameters after reboot. for example, i have such parameter as gmt. it defined as +3. i can change it while program is running to -5 for example and i want to have gmt -5 when i next time turn on my computer
When in programming it is simple - program creates ini file in it's directory and read/write parameters from this ini-file, but how to make possible to do the same thing when it works from iso?
View 1 Replies
View Related
Aug 9, 2011
I have installed Fedora 15 on a Mac mini 2.4. Everything works fine except the audio and wireless devices.
lspci shows this:
In the gnome, the network option only shows the wired connection. I tried to do yum install kmod-wl which downgraded the graphic display and didnt help in wireless issue. I reinstalled nvidia driver. the lspci is after doing all this stuff.
View 5 Replies
View Related
Mar 27, 2011
I recently installed suse 11.4 x64 onto my hp tx2000 tablet. everything has been working great including the wifi card. It's a broadcom 4328 a/b/g/n/bluetooth card and it was using the broadcom-wl driver. Earlier today i plugged in an usb wifi adapter to test whether it worked on suse plug and play. Well after plugging in and using this wireless adapter, my internal wifi card is no longer visible to the system. I've tried lspci and its not displayed. I booted into a different suse install and it wont work there. My bios does not seem to have a disable feature and the killswitch is in the correct position. The bluetooth is working but the wifi is not. In lspci i used to see "hp integrated (wireless+bluetooth)" and "broadcom 4328..." but now only the former.
View 9 Replies
View Related
Jan 13, 2010
I have an AverTV Hybrid Volar MAX.I really would like to get the FM radio tuner working with this on my laptop. When I do 'sudo fmscan' I get the following:ioctl VIDIOCGTUNER: Invalid argumentI have downloaded and installed the drivers from AverMedia's web page (TV is working).This is on a Compaq Laptop (Presario V5305WM) on a fresh install of Jaunty.
View 1 Replies
View Related
Dec 3, 2010
Ive been trying to set up an irc server for the past couple of days. It works, but I havent been able to work out how to configure hybserv as well as server admins and ops, etc. Does anybody know of a good tutorial on how to configure ircd-hybrid with services? The endlessly long config file is just too confusing for me.
View 1 Replies
View Related
Mar 13, 2011
I have a Rackspace server running Ubuntu Lucid Lynx, where I have installed an IRCd-Hybrid. I can connect to the IRC server using irssi that was installed on the same machine where the server is, but when I try to access it from my computer at home or my friends try I get this error:
Code:
Connection Refused
What should I do?
View 1 Replies
View Related
Dec 30, 2010
Is it possible (without too much difficulty) to have an Openbox/Gnome desktop?
Since Gnome is a full desktop environment and Openbox is only a Window Manager.
Use the Gnome DE and have Openbox WM, instead of Metacity or Compiz? (with Ob Config & Menu included)
I know it won't be near as light as a straight Openbox, but it would add Ob convenience to Gnome DE. What do you think? Work-arounds?
On a small partition I have LinuxMintDebian 'testing' (Gnome) x64 ... can I 'add' Openbox? Not replacing anything except the WM?
View 2 Replies
View Related
Apr 2, 2010
I am also new to ubuntu but have manage so far,except for my tv-card. Seems like Metv and kaffeine cant see the tv-card ?! I have a asus mycinema-p7131 hybrid,does someone have info on installing this ? except for this i think ubuntu 10 is great.
View 1 Replies
View Related
