Debian Installation :: I915 Not Loading By Default - Hybrid Graphics Nvidia
Nov 10, 2014
I'm on an HP envy with with hybrid graphics configuration. I installed debian 7.7 from DVD, but it failed to load i915 driver on its own. It loaded nouveau. But gnome falls back to classic mode. There is not brightness control either.I tried adding i915 to /etc/modules and also blacklisted nouveau at the command line. Now i915 gets loaded, but with some hickups as shown in dmesg. Still I'm in fallback mode in gnome.
Code: Select alljay@aura-envy:~$ dmesg | grep drm
[ 16.152467] [drm] Initialized drm 1.1.0 20060810
[ 16.161706] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
So I went ahead and added intel_agp (before i915 line) to modules file, but still no luck. I suspect there is no module called intel_agp at the first place, because :
Code: Select alljay@aura-envy:~$ sudo modinfo intel_agp
[sudo] password for jay:
ERROR: Module intel_agp not found.
URL....
View 2 Replies
ADVERTISEMENT
Aug 28, 2011
I recently pulled out my radeon graphics card as I never knew where my display would show up. I have onboard graphics and had the card. I am using onboard now.
Looks like I have a driver crash here in the 2.6.40.3 kernel:
[ 1791.466962] ------------[ cut here ]------------
[ 1791.467505] kernel BUG at drivers/gpu/drm/i915/i915_gem.c:3292!
[ 1791.467505] invalid opcode: 0000 [#1] SMP
[Code]...
View 2 Replies
View Related
Sep 3, 2010
I have had continued issues with my graphics: [URL]... Now, after an update manager update, I have a new issue. My mouse cursor disappears when I use my external monitor beyond a given resolution. Also, my settings for the laptop monitor are incorrect (will not let me select the true laptop native resolution). I even had an instance when I had mirrored images, but saw the mouse pointer only on the laptop screen, but not on the external monitor. I also recently did the suggestion to
Code:
gksudo gedit /etc/default/grub
GRUB_CMDLINE_LINUX_DEFAULT="i915.modeset=0 quiet splash"
Which had caused issues when I was previously running Ubuntu in dual boot with WIN XP. I am now on standalone Ubuntu 10.04. I reversed the grub edit, but the problem persists. Currently, I have to keep my external monitor at a much lower resolution for mouse pointer to show up, or use the CTRL key to show mouse pointer location feature in higher resolutions. All other aspects of the higher resolution for the external monitor work well...just that my mouse cursor does not show up.
View 1 Replies
View Related
Jan 26, 2010
I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
View 4 Replies
View Related
Jul 30, 2011
Ok so I have found the help doc in the ubuntu community spot and it says to run the following command,
Code:
grep -i switcheroo /boot/config-2.6.*
And I do that and nothing happend, so i though ok maybe i missed something and moved to the next step to see if the switch file is there and I do,
Code:
ls -l /sys/kernel/debug/vgaswitcheroo/switch
Says the file can not be found, and according to the post on the community help spot VGA_Swicheroo is not enabled, well my problem is how do i enable it and use it?
View 2 Replies
View Related
May 25, 2011
I am using dell XPS with hybrid graphics. Intel integrated graphics card and NVIDIA. I have installed both Ubuntu, Windows 7 and opensuse in it. Ubuntu and Windows comes up. But Opensuse after showing some boot messages goes blank and nothing comes up. I am using OpenSuse 11.4.
Code:
$ sudo dmidecode -s system-product-name
Dell System XPS L502X
$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation
Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 VGA compatible controller: nVidia Corporation Device 0df5 (rev a1)
View 8 Replies
View Related
Apr 30, 2011
I'm running a hybrid graphics card (AMD Radeon HD 6630m) so naturally I'd like to have full functionality between the two.
Here's what I've done so far:
Downloaded the .run file from AMD's website
Built packages for both AMD and Intel side of the card
Unpackaged said packages
I used ATI Catalyst's GUI to install (in hindsight terminal might have been better and more informative) and it is now saying
After installation of the generated package, it is important to save your X Window configuration file, and then run 'aticonfig --initial' (in a console window) to complete the basic configuration, please run aticonfig from a console window or AMD CCC:LE from the Desktop Manager Menu
So how and why do i save my X Window config and when I give the aticonfig command it says no adapters detected
View 9 Replies
View Related
Apr 16, 2010
On both Karmic Koala as well as Lucid Lynx, I am having massive problems getting my nvidia card to register properly. I am on an Acer Aspire 5953 laptop pc with a Gt130m discrete GPU in a hybrid installation with an onboard GPU.Freshly installed, both 9.10 and 10.04 runs smoothly, I can enable desktop effects, I can even see the screensavers that run openGL - although they run laggily in fullscreen, since they're obviously using the onboard, and very weak, GPU.The problem however, appears whenever I install the suggested NVIDIA drivers that Ubuntu finds for me - after doing this, I am asked to reboot the system and on both systems, I am treated to a black screen, instead of a login-screen. The only way to get the system up and running again, I have found, is boot in fail safe mode and edit /etc/X11/xorg.conf, erasing everything. This lets me boot back up in a regular mode.
When I check the logs, both the onboard GPU and the gt130m GPU is located, the onboard as PCI:0:0:2:0 and the nvidia gt130m discrete gpu as PCI:0:1:0:0 - I have tried adding BusID: ("PCI:0:1:0:0") to the xorg.conf, too, to no avail. I am continously treated to the black screen (a flicker at most) and the logs always tells me that no xserver could find no screens.So far, I have only been installing Ubuntu inside windows - I am hesitating to install on a fresh drive, since I am afraid of the nvidia black screen putting me in a position where I can't access the system. Is it possible that the fact that I install ubuntu inside windows might somehow affect Linux's capability of accessing my discrete GPU?
View 2 Replies
View Related
Apr 8, 2010
I have already installed Debian testing and now looking to install Nvidia drivers version 190.
I had downloaded the Nvidia driver from their site but the way it installed on Ubuntu is not the same here in Debian. Obviously, I failed.
View 14 Replies
View Related
Apr 28, 2010
I revived my old desktop (failed psu), and installed debian squeeze using netinst. It has a nvidia geForce 7600GT card. The driver in squeeze does not work very well, so I downloaded nvidia driver-installer. When I run it, it comes back with an error saying the kernel (I assume the nvidia graphics kernel) is compiled with gcc4.3, but the system is using gcc4.4. Using synaptic manager, I installed gcc3.3, but same error.
Next I tried to uninstall gcc4.4 and it gave a warning the system might not be usable. I did not understand it, but I went ahead and uninstalled gcc4.4 and guess what, the system is not usable, and I have to re-install squeeze. Not a big loss, since I do not have much in it. How to install this nvidia driver, specifically, how do I get switch to gcc4.3 from gcc4.3? Also, the squeeze install gave me 2.6.33-trunk-amd64, and 2.6.33-3-amd64. How do I get rid of ...trunk-amd64? Do I just delete it from grub?
View 10 Replies
View Related
May 25, 2011
There's no login screen and I can't get to a tty. I have tried editing xorg with the backup, but the name of the driver is the same.Is there anyway to roll back the driver from a livecd?
View 9 Replies
View Related
Sep 1, 2011
Installed Ubuntu 11.04 but i don't know how to install my nvidia 7200 gs graphics card. in the previous versions (ubuntu 9.10) it installed very easly.. But in Natty 11.04, while i am try to install my driver it fails 2 times and after installation (reboot) ubuntu freezes and not working So reinstalled ubuntu 11.04.
View 3 Replies
View Related
Mar 3, 2011
I think I am experiencing the same problem as a lot of people with the Nvidia graphics driver. I have tried to use the guide here, mjm, RPM Fusion and the nvidia website. Each lists my card as being supported but each time the install fails and I have to Alt - Kitaral - f2 to get to the command line log in.
View 5 Replies
View Related
Dec 11, 2008
I took the following path: Yast - Hardware - Graphics Card and Monitor; and it gave me message "the configuration is Framebuffer based and your system does not support changes for resolution and/or color settings". I verified my system's(dual boot system) graphics card using windows OS and it showed NVIDIA Quadro FX 570, but in X11 configuration it shows "Card: VESA Framebuffer Graphics" and the Properties tab is not active.
View 1 Replies
View Related
Oct 18, 2010
I wanted to dualboot-install my Laptop with Ubuntu 10.10 and Windows 7, but when I try to launch the Ubuntu setup, after language selection I get a blackscreen. I know that Ubuntu is loading because I can hear the login sound after a while. But the screen stays black and I can't to anything! Pls. post any solution which could help me, because I really need to use Ubuntu again.
Laptop specs:
Sony Vaio VPCS11V9E
Core i5 M520 2.40 GHZ
Nvidia GeForce 310M
4GB Ram
Tried installing Ubuntu 10.10 64Bit
View 9 Replies
View Related
May 11, 2011
I have really problems with i915 driver (module) and my graphic card on squeeze with gnome.There is a BUG and there is no any solution at the moment:[URL]So I'd like to disable i915 driver from the startup and load i810 module instead:
Code:
# modprobe i810
# modprobe i910
#
BTW I've tried to create /etc/X11/xorg.conf file with i810 module for the video card, but it doesn't work, i915 will be loaded.
Code:
Section "Device"
Identifier"i810"
Driver"i810"
EndSection
Is it any other way to blacklist i915 completely from the startup, for example in /etc/modprobe.d/blacklist.conf?
View 4 Replies
View Related
May 8, 2009
I am using fedora10 in my notebook. I installed nvidia-graphics driver as follows.
su -c 'rpm -ivh http://download1.rpmfusion.org/free/...ble.noarch.rpm'
su -c 'rpm -ivh http://download1.rpmfusion.org/nonfr...ble.noarch.rpm'
su -c 'rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-*'
Then i installed kmod-nvidia with yum su -c 'yum install kmod-nvidia' When i tried to open NVIDIA control panel, i got a message that nvidia-driver should be configured. Then i issued the following command as root.
nvidia-xconfig. The i rebooted the system. Now in the boot menu, i see two kernel informations as follows
Fedora (2.6.27.21-170.2.56.fc10.i686)
Fedora (2.6.27.5-117.fc10.i686.PAE)
If i boot my linux with first one, x windows starts, if i boot with the second one (previously default), the x-windows is not opening. Why this happens? So i booted my system with first option in the boot menu. The system booted and x.windows started but i am not able to use any software that uses opengl window. The glxinfo command gives me the following error.
[Code]....
View 3 Replies
View Related
Jul 8, 2010
10.04 and Nvidia video card.
This sequence:
sudo apt-get purge nvidia*
sudo apt-get install nvidia-current
sudo update-alternatives --config gl_conf (not sure what to choose, I just pick an option at random)
sudo ldconfig
sudo nvidia-xconfig
and then restart gets everything apparently working correctly, with my desktop spread across two monitors.
However, after two or three computer restarts, it 'forgets' and defaults back to low graphics mode and all the common error messages mentioned in multiple threads here, with my second monitor just duplicating the primary monitor.
Under System-Hardware drivers it says Nvidia_current is activated but not in use, regardless of whether it starts normally or in low graphics mode.
What's up? It's a pain to have to go through that sequence over and over again, and then restart my computer every two or three days, and leaving the computer on 24/7 isn't an option. power saving and all that.
View 4 Replies
View Related
Oct 11, 2010
I'm trying to setup a dual boot of windows 7 x64 and Ubuntu 10.10 i386. Before I got windows 7 and the new graphics card it ran 9.10 perfectly. If I take the card out (Nvidia 8800 Ultra), it will install fine but when I put the card back in, it crashes. It appears that it just doesn't like the card.
View 3 Replies
View Related
Jul 17, 2011
As this question pops up quite often on IRC and, as a quick search told me, on this board as well, I decided to put together some directions that, with some or the other variation, also apply to other Linux distributions and have never failed me. The following is confirmed to work for Kubuntu 11.04 Natty Narwhal 64bit with a NVIDIA GeForce GT 240 and on Kubuntu 11.04 Natty Narwhal 32bit with a NVIDIA GeForce FX 5900XT graphics card.
This HowTo will describe how to install the proprietary NVIDIA graphics card drivers using exclusively the command line. I strongly suggest you try this method for a fresh install of graphics drivers before trying any other method, especially a GUI-driven one (I never used a GUI for package management on a Debian-ish system, but I hear that the Ubuntu Software Center supposedly has a way of installing proprietary graphics drivers).
The restricted packages repository should be enabled by default. To the more experienced users: This HowTo uses apt-get for demonstrating the install process. If you prefer using aptitude, feel free to replace the commands accordingly. First steps. As well be doing everything on the command line, first open a terminal application from your desktop environments menu or from a shortcut icon on your panel, if you have one. You should be greeted by a prompt that looks like this:
[Code]...
View 7 Replies
View Related
Apr 26, 2009
I have a Packard Bell Imedia desktop with on-board ATI graphics. I also have a spare Nvidia PCI card. Is there a way I could use the Nvidia to run a second screen, if so how as the Nvidia and fglrx drivers seem to collide in a show stopping way!!I am running Kubuntu Intrepid, but have resorted to Gnome as KDE4 went spectacularly wrong on me.
View 5 Replies
View Related
Jul 19, 2010
I wanted to update my NVIDIA Drivers from the default to 256 (or whatever the latest is on their site). After the upgrade from their site and installing it through a command line, I've had trouble. For some reason, whenever I boot, I get the Kubuntu boot screen, even though I run plain Ubuntu. Also, after I boot it defaults to low graphics mode, and I have to hit "restart X" to make it run normal. Even then, visual effects won't enable, and games won't run, because apparently the "hardware device cannot be found". My attempts to revert back to old drivers have been unsuccessful; It says it's running the recommended right now, but I still have all these problems.
View 2 Replies
View Related
Jun 6, 2014
I'm trying to set up an HP DisplayLink USB graphic adapter on Debian 6 to be paired with the notebook's integrated Intel i915 video card. I use a custom 3.11.1 kernel in which the options for VGA arbitration, fbdev framebuffer and DisplayLink driver are enabled as built-in, not as modules.
The device works and I'm able to correctly run an X session on a DVI monitor connected to my notebook thru this USB graphic adapter. However, I'm still not able to use both the DisplayLink device and the integrated Intel i915 at the same time under X, with the purpose to extend the desktop area over the two screens, side by side.
During a boot, if the DisplayLink adapter is detected over the USB cable, the X-server's Intel driver is repudiated as shown in the logs below, and the main notebook's screen stops working with X. (nonetheless, it still functions on the "Alt-F1" text terminal).
Relevant portion of /var/log/Xorg.0.log
In particular, it shows: [ 2509.084] (II) UnloadModule: "intel"
Code: Select all[ 2509.061] (II) FBDEV: driver for framebuffer: fbdev
[ 2509.061] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
[Code] ....
In case it is required, this is the relevant excerpt of my xorg.conf. In my full xorg.conf file installed locally, no other options deal with graphics or screens.
Code: Select all# All down here is required for DisplayLink
# Depth must be 16 bits for all the screens to support DisplayLink
Section "Device"
Identifier "IntelVideo"
Driver "intel"
EndSection
[Code] ......
View 1 Replies
View Related
Jun 11, 2011
I disabled KMS and checked for direct rendering with the glxinfo command. glxinfo, reported that direct rendering is enabled. This is good news, because it means that the i915 driver is being used.
[Code]....
Now, I need to write a custom xorg.conf file to force X to use the native resolutions of my chip.
View 1 Replies
View Related
Nov 6, 2010
I have completed building gazebo, and everything was done successfully according to the following link [URL]... bot_Simulation , but when I tried to invoke gazebo using the command "gazebo /usr/local/share/gazebo/worlds/pioneer2dx.world" it returns the following error
[code]...
View 1 Replies
View Related
Jun 22, 2011
I do not know if this is really something I should worry about. I am running Debian testing on my laptop (HP Pavillon dv6). Today, the aptitude update---aptitude upgrade gave me a new kernel (2.6.39). However, if I boot with that kernel, I get a warning (do not know if that is the way I should call this) telling me that the machine failed to get the i915 symbols so turbo graphics will be disabled.I have not done any serious test, but at first sight I do not notice any difference performance-wise with respect to the previous kernel. what am I supposed to do to fix this?
View 8 Replies
View Related
Jun 9, 2011
Using online Debian guide, installed latest nvidia-current, glx etc which seems to be 195.xx Machine boots to GUI but monitor setting menu doesnt respond nor is there an nvidia specific one. xorg.conf shows 'nvidia' driver but I suspect I am still on 'nouveau' since the synapatic package manager doesn't show an nvidia xserver-xorg-video choice.
Second question, any trailheads for using wheezy based drivers (i.e. nvidia's latest 270.xx) with squeeze?
View 14 Replies
View Related
Jun 26, 2015
I've got a task: make time server, that gets time from gps, shows it on display and send to different systems through different ports like com, ltp, etc.
Solution is qt program, included in hybrid iso image.
I've created my binary-hybrid.iso debian, added my program and installed it on pc sudo dd if=/media/cdrom/binary-hybrid.iso of=/dev/sda then i restarted and everything is ok, but...
I also need:
1) to make my pc works as ntp-server, to do this i must change file ntp.conf in ntp****.deb before i build my iso
how can i do this?
as i realized according to live.debian.net/manual it's possible to do by putting smth to /live-build/config/packages.chroot and by adding some parameters to lb config but i can't find how and what
2) to save my program parameters after reboot. for example, i have such parameter as gmt. it defined as +3. i can change it while program is running to -5 for example and i want to have gmt -5 when i next time turn on my computer
When in programming it is simple - program creates ini file in it's directory and read/write parameters from this ini-file, but how to make possible to do the same thing when it works from iso?
View 1 Replies
View Related
May 11, 2011
I use my computer on a TV using a DVI to HDMI cable using an i915. Its been solid every release until this one. I change channel and then return to Ubuntu I get no signal/ Purple screen. I have tried turning off sync to vblank in compiz and running Gnome Desktop with no effects both seem to make no difference.
View 1 Replies
View Related
Dec 30, 2010
Is it possible (without too much difficulty) to have an Openbox/Gnome desktop?
Since Gnome is a full desktop environment and Openbox is only a Window Manager.
Use the Gnome DE and have Openbox WM, instead of Metacity or Compiz? (with Ob Config & Menu included)
I know it won't be near as light as a straight Openbox, but it would add Ob convenience to Gnome DE. What do you think? Work-arounds?
On a small partition I have LinuxMintDebian 'testing' (Gnome) x64 ... can I 'add' Openbox? Not replacing anything except the WM?
View 2 Replies
View Related
