CentOS 5 Networking :: RTL8111 / 8168B Not Working In Dell Studo Hybrid - Sort It?
Jan 30, 2009
This week I picked up a Dell Studio Hybrid and installed CentOS on it. I originally used 5.0 since I already had the DVD and the network card wasn't recognized at all (lspci recognized it but the card didn't show up in system-config-network). I then downloaded the 5.2 DVD and installed that. The network card then showed up in system-config-network but it still didn't work. If DHCP is enabled it tells me that no link is present, and if I manually configure it, I still can't ping the router. lspci reports the following about the network card:
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
The driver used is r8169.
I put Fedora 10 on it and the network is working fine, but I'd rather run CentOS on this machine. Is the issue likely to be fixed with CentOS 5.3 or should I just stick with Fedora?
View 11 Replies
ADVERTISEMENT
Jun 14, 2010
I've been having problems trying to connect to my home network with my onboard NIC. No solution given on the forum has helped me so far.. I just can't seem to connect to the network and I have no idea how to fix it. My NIC is recognized (lsmod shows r8168 is loaded) but when I choose 'auto ethernet' nothing happens .I hope there is someone that can help me because It's a pain to not have internet access...
View 2 Replies
View Related
Jun 21, 2009
I have 2 dedicated servers, one with RTL8111/8168B (rev 02) and one with RTL8111/8168B (rev 01) both running centos 5.3, the problem is like this, all things run great on the dedicated server with NIC RTL8111/8168B (rev 02) until we run backup (cpanel backup) after the backup is finish the server lags , no high load, just lags, the server is a 8 GB ram, i7 quad core, so there is no load problem or someting like this, the second server has also cpanel on it and it has no lag but it has RTL8111/8168B (rev 01) , we think that the problem is with the RTL8111/8168B (rev 02) should we update the driver ?
Here is the output from it:
2.6.18-128.1.10.el5 x86_64 x86_64
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) .....
View 1 Replies
View Related
Oct 12, 2010
I have an Asus P6T7 WS motherboard with 2 embedded NIC's.Relevant output from lspci:
0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
0b:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
uname -a:
[code].....
I am running a mail server and my POP3 clients have started complaining of slow speeds, about 10 days back. This prompted me to take remedial action on many fronts, finally I decided to look at the link itself.Attempts to force the NIC into full duplex mode using ethtool have failed. The command runs and throws me back to the prompt, but the NIC remains in half duplex mode.
Command that I have tried: ethtool -s eth1 speed 100 duplex full autoneg on modprobe -l r816*:
/lib/modules/2.6.18-164.el5PAE/kernel/drivers/net/r8169.ko
View 5 Replies
View Related
Apr 19, 2010
I have an MSI Megabook M662. Can't get my wireless working. I have "enabled" checked, but can't view any connections. I don't have wireless at home, I'm trying to make this work for free connections at the library, etc. From the Help Menu troubleshooting I tried:
mag@MSIubuntu:~$ sudo lshw -C network
[sudo] password for mag:
*-network
description: Ethernet interface
[code]...
This reports Disabled, and the advice is to check that device is on. But I just want to roam for service, I don't have my own wireless at home. I thought I might need to use ndiswrapper but I cannot locate a driver for this card info:
lspci -nn 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
What should I try now?
View 9 Replies
View Related
Sep 18, 2014
I'm experiencing very slow network speeds in one direction (out) on a clean install of debian.
iperf client running on laptop connecting to server with issue:
Code: Select all$ iperf -c 192.168.10.187 -d
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 128 KByte (default)
------------------------------------------------------------
------------------------------------------------------------
Client connecting to 192.168.10.187, TCP port 5001
TCP window size: 129 KByte (default)
------------------------------------------------------------
[ 5] local 192.168.10.131 port 55340 connected with 192.168.10.187 port 5001
[ 6] local 192.168.10.131 port 5001 connected with 192.168.10.187 port 52664
[ ID] Interval Transfer Bandwidth
[ 5] 0.0-10.0 sec 247 MBytes 207 Mbits/sec
[ 6] 0.0-11.5 sec 1.00 MBytes 730 Kbits/sec
I've tried with different cables on the server, no luck. Also note that the laptop gets full speed to speedtest.net as per my internet subscription (75/75 gbit fiber), so the laptop can be ruled out as a problem since it gets more than 75X performance to the internet compared to the local server.
The main purpose of this server is to be a virtualbox host. I've set up one guest system and ran iperf between the host/guest (bridged network). It gives better numbers, still the host -> guest direction is much slower than it should be:
Code: Select allClient connecting to 192.168.10.187, TCP port 5001
TCP window size: 108 KByte (default)
------------------------------------------------------------
[ 3] local 192.168.10.163 port 48573 connected with 192.168.10.187 port 5001
[ 5] local 192.168.10.163 port 5001 connected with 192.168.10.187 port 48856
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 1.65 GBytes 1.42 Gbits/sec
[CODE]..
View 4 Replies
View Related
Jan 20, 2011
I have installed CentOS 5 just downloaded yesterday on a Dell D620. Everything but the wireless card works. So I found this article:
http://wiki.centos.org/HowTos/Laptops/Wireless/Broadcom
and followed it step by step and was able to complete all of the tasks. The problem is that obviously it still won't start. It is not even recognized as an adapter but when I run lspci -v it is there sure enough. When I look under the networking GUI it is listed there but it has no MAC assigned to it. Please let me know what command output you need to see and I'll get here asap. I have searched this forum and other sites and nothing so far has worked.
View 1 Replies
View Related
Oct 20, 2010
The Realtek RTL8111 wireless does not work in Mint 10 or Ubuntu 10.10. Works perfectly in Mint 9 and Ubuntu 10.04. No proprietary driver necessary. Has anyone managed to get it working in Ubuntu 10.10? : You can click the one you want to connect to and enter your security key. I just use WEP because it's easy. I enter the key and the system just tries to connect until it times out. You can repeat this process indefinitely. Wired works fine but after any available updates are installed, still no wireless capability.
View 3 Replies
View Related
May 25, 2011
I am using dell XPS with hybrid graphics. Intel integrated graphics card and NVIDIA. I have installed both Ubuntu, Windows 7 and opensuse in it. Ubuntu and Windows comes up. But Opensuse after showing some boot messages goes blank and nothing comes up. I am using OpenSuse 11.4.
Code:
$ sudo dmidecode -s system-product-name
Dell System XPS L502X
$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation
Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 VGA compatible controller: nVidia Corporation Device 0df5 (rev a1)
View 8 Replies
View Related
Nov 3, 2010
I would like to know if someone was able to upgrade/fresh install ubuntu 10.10 maverick on a dell studio hybrid. First I've tried to upgrade. Everything went well, until the system started. First thing to notice is that the orange was so bright that was almost impossible to look at the monitor. Not a big deal, adjusting some monitor brightness etc. Second the mouse (usb) stopped for some fraction of a second, or a second, when you click to open a program. It is annoying but it is also a problem that I could wait to find some solution.
Third and worse, it was completely impossible to see videos in vlc or other players, I've tried vlc, xine, etc, the videos was stuttered, choppy. SMPlayer was able to play them better. I've tried the solution here [URL] and it does not work at least for me. Fourth the fans went completely crazy, running as mainly when I have to use smplayer, I've found some complains about that [URL] but the solution does not apply to my computer.
Then I've tried a fresh install hoping that some of the troubles would not appear. The only trouble solved was the look and feel. Mouse the same trouble, stuttered, choppy videos on vlc, fans running all the time. And now it was impossible to install the wireless proprietary driver Broadcom sta. The only solution was to come back to Lucid. A fresh install of Lucid and mouse working ok, no troubles seeing videos in vlc, fans working absolutely normal and no troubles to install the wireless driver.
View 1 Replies
View Related
Jul 16, 2010
Im running Centos 5.4 x64 on dell 1747 laptop, and icant get my bluetooth to run properly, here's my outputs for now lsusb Bus 001 Device 004: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
View 6 Replies
View Related
Oct 9, 2010
I installled Ubuntu 10.4.1 on a brand new computer with a Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller on a Foxconn G41MXE motherboard. and I have been unable to connect to wireless network. I have gone through the wireless trouble shooting guide to no avail. When i "check for device recognition" i get the following (note the is no CLAIMED UNCLAIMED ENABLED OR DISABLED)
udo lshw -C network
*-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
[code]...
View 7 Replies
View Related
Mar 2, 2010
After installing a Dell Optilex 280 desktop with Centos 5.4, I configured sendamil, squid and all the extras I needed for a proxy and email server. All was fine until I switched the machine off. I had changed the resolution before and all was working fine. Now I have lost my gui , the system starts O.K but goes blank after "starting udev". I can use webmin to administer the server from a nother desktop/laptop but the monitor is totally blank. I tried most configurations on the /etc/X11/xorg.conf file even tried to create a new one using X -configure but still nothing changed. I cant afford to reinstall because of the time it takes to update the box, our broadband connections are so expensive this end of the world (Zimbabwe) and not so efficient. I have looked at the logs and tried to google but the solutions wont work for me? I suspect there could be an issue with the intel graphics adapter?
View 3 Replies
View Related
Feb 25, 2009
I'm new on Dell PowerEdge 2900. I dont know how to install centOS 5.2 on it. whice OS type that I should select. at first I select RH enterprise 5 and it format HDD. already and I put centOS 5.2 in, but it was deny and eject that cd. when I power off it shown that
"root(hd0,1)filesystem type is ext2f2,partition type0x83
kernel/linux/vmlinz%(ksLocations)
Error is : file not found
press any key to continue"
View 5 Replies
View Related
Jun 30, 2011
My wireless download rate is absurdly low (0.3 mbps) compared to a faster upload rate (1.5 mbps). My girlfriend's laptop running windows gets much higher download rate (20+ mbps).
View 8 Replies
View Related
Sep 27, 2009
I have made sure the card is not muted using kmix, alsamixer, and running alsaunmute 0. It was working for some time and just stopped. I am not sure if getting rdesktop to work on the laptop caused the issue or not since that seems to be the last major thing I did. (missing my sipie.py). This is what I am working with:
~]$ uname -a
Linux xxxx.xxx.xxx 2.6.18-128.7.1.el5 #1 SMP Mon Aug 24 08:20:55 EDT 2009 i686 i686 i386 GNU/Linux
~]$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
[Code].....
View 16 Replies
View Related
Jan 13, 2010
I have an AverTV Hybrid Volar MAX.I really would like to get the FM radio tuner working with this on my laptop. When I do 'sudo fmscan' I get the following:ioctl VIDIOCGTUNER: Invalid argumentI have downloaded and installed the drivers from AverMedia's web page (TV is working).This is on a Compaq Laptop (Presario V5305WM) on a fresh install of Jaunty.
View 1 Replies
View Related
Feb 25, 2010
I have Fedora 12 and Windows 7 in a dual boot configuration in my lenovo laptop.The config of my laptop is core2duo 1.73, 3gb ram and 160gb hdd.I updated my fedora 12 yesterday. But after that internet stopped working. But I'm able to ping google.com successfully.Internet is working properly in my windows. I have posted this message from the same ethernet connection in my windows.I have posted the output when pinging google.com down here. code...
View 3 Replies
View Related
Jul 16, 2010
Im having problems making my wireless card "Broadcom 4312" work on centos 5.4 X64 , i have installed and built the driver from their official site and inserted its module successfully, but whenever i try to avtivate the interface "called eth1" i get the following
Error for wireless request "Set Encode" (8B2A) :
SET failed on device eth1 ; Invalid argument.
Error for wireless request "Set Encode" (8B2A) :
SET failed on device eth1 ; Invalid argument.
View 2 Replies
View Related
Dec 9, 2010
My TRENDnet TEW 424UB Wireless Adapter does not show up in the network window. The light does work while using Ubuntu but it goes on during Windows. How do I fix this?
View 6 Replies
View Related
Jan 20, 2011
I upgraded to Maverick Meerkat on my Compaq Presario CQ60 and the installation bugged killing all the documents and settings. I'm not a total n00by to Linux as I've been using it for years, but neither am I an advanced user.
Any halp you can give with this as I've tried everything I can think of to get the wireless card to work. Which basically boils down to trawling Google for the drivers and attempting to install them. code...
View 3 Replies
View Related
May 10, 2010
It's been a few hours since the Adobe Flash plugin on my Firefox is behaving in a strange way: some of the clickable dialogs do not work anymore. I click on them but nothing happens.
For example: in chatroulette, the dialog that asks for the permission to use the webcam can't be clicked:
Same happens for other flash sites.
I'm using Firefox "Namoroka" v3.6.5pre and Flash 10.0r45
View 5 Replies
View Related
May 12, 2011
Just bought this toshiba laptop m645-s4114 today @ bestbuy and I installed the ubuntu 11.04 successfully erasing the MS OS on it but later realized my wireless network doesn't work. I have tried and followed everything that was given on some linux ubuntu forums with no avail.
View 9 Replies
View Related
Jan 7, 2010
The network icon and sound icon disappeared from the panel all of sudden one day while i was using ubuntu 9.10 and the network got disconnected. It used to work fine before when i was using ubuntu 9.04 and even after i updated to 9.10, but then that happened. I added the notification area back to the panel but now ubuntu cannot even find any wireless networks. When i connect a LAN cable to my laptop the internet works fine, but the wireless networks area in the network icon is grayed out and it doesn't show any wireless networks. I'm using a Dell Inspiron 600m laptop and my network card is Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05).
View 9 Replies
View Related
Feb 22, 2010
I'm running Ubuntu 9.10, Dell Inspiron 1545. I have the NDISwrapper installed, and the driver shows up in "Hardware Drivers" as activated (Broadcom STA wireless driver) it also shows up in "Windows Wireless Drivers" (bcmwl6) but it still won't allow me to connect wirelessly.
View 9 Replies
View Related
Jun 6, 2010
I am having trouble in getting the wireless up in Ubunto 10.04. Under Wireless Networks it says "wireless disabled". I have a dual boot with Windows 7, installed Ubunto with the help of Wubi installer. My laptop is Dell Inspiron 1545, with a 64 bit architecture.I have already done checking and enabling the wireless driver by going to System- Administration-Hardware Drivers and choosing Broadcom STA driver.
View 7 Replies
View Related
Jul 12, 2010
When I freshly installed my Ubuntu 10.04, broadcom wireless worked after I installed the driver using hardware manager. But somehow it got de-activated, and not its not working. I need help related to that. Here is some output which might help you to understand the problem.
Code:
paras@ubuntu:~$ sudo lshw -C network
[sudo] password for paras:
*-network DISABLED
description: Wireless interface
[code].....
View 7 Replies
View Related
Jan 22, 2011
I have spent all day trying to wireless network to work on my Dell Inspiron 1440, but no luck.
I followed the guide here: [URL]
Here are the details of my network card:
root@bruparel-Inspiron-1440:/home/bruparel# lspci -n | grep 14e4
0c:00.0 0280: 14e4:4315 (rev 01)
Here are the more verbose details:
0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
Subsystem: Dell Wireless 1397 WLAN Mini-Card
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at f69fc000 (64-bit, non-prefetchable) [size=16K]
[Code]....
Things seem to install fine, but the wireless network remains unavailable (wireless network is disabled).
If someone can walk me through the trouble-shooting process, I tried the solution suggested in the sticky at the top too but no luck.
View 1 Replies
View Related
Mar 23, 2011
I've recently partitioned off a section of my hard drive to run Ubuntu from and I'm having trouble with the network connections. In my device manager of Windows 7, it lists that my network adapters are
1. DW1520 Wireless-N WLAN Half-Mini Card
2. Intel(R) 82577LM Gigabit Network Connection
Is there something I'm not doing right in order to allow me to connect to a wireless connection? Are these devices even enabled in Linux systems?
View 6 Replies
View Related
Jul 10, 2011
I just did a fresh wipe and install of Ubuntu 11.04 on my Dell D630 Latitude. I installed connected to the internet and ubuntu recognized I was missing firmware and I installed and rebooted. Now the "firmware missing" notice is gone but I don't know how to connect to my wifi. I can access internet with the ethernet cable.
This is the lspci:
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c)
[Code]....
I feel like I just need to add the wifi network, but I don't know what info to put into the fields.
View 4 Replies
View Related
