OpenSUSE Install :: Using Dell XPS L502X With Hybrid Graphics?
May 25, 2011
I am using dell XPS with hybrid graphics. Intel integrated graphics card and NVIDIA. I have installed both Ubuntu, Windows 7 and opensuse in it. Ubuntu and Windows comes up. But Opensuse after showing some boot messages goes blank and nothing comes up. I am using OpenSuse 11.4.
Code:
$ sudo dmidecode -s system-product-name
Dell System XPS L502X
$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation
Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 VGA compatible controller: nVidia Corporation Device 0df5 (rev a1)
View 8 Replies
ADVERTISEMENT
Nov 3, 2010
I would like to know if someone was able to upgrade/fresh install ubuntu 10.10 maverick on a dell studio hybrid. First I've tried to upgrade. Everything went well, until the system started. First thing to notice is that the orange was so bright that was almost impossible to look at the monitor. Not a big deal, adjusting some monitor brightness etc. Second the mouse (usb) stopped for some fraction of a second, or a second, when you click to open a program. It is annoying but it is also a problem that I could wait to find some solution.
Third and worse, it was completely impossible to see videos in vlc or other players, I've tried vlc, xine, etc, the videos was stuttered, choppy. SMPlayer was able to play them better. I've tried the solution here [URL] and it does not work at least for me. Fourth the fans went completely crazy, running as mainly when I have to use smplayer, I've found some complains about that [URL] but the solution does not apply to my computer.
Then I've tried a fresh install hoping that some of the troubles would not appear. The only trouble solved was the look and feel. Mouse the same trouble, stuttered, choppy videos on vlc, fans running all the time. And now it was impossible to install the wireless proprietary driver Broadcom sta. The only solution was to come back to Lucid. A fresh install of Lucid and mouse working ok, no troubles seeing videos in vlc, fans working absolutely normal and no troubles to install the wireless driver.
View 1 Replies
View Related
Apr 30, 2011
I'm running a hybrid graphics card (AMD Radeon HD 6630m) so naturally I'd like to have full functionality between the two.
Here's what I've done so far:
Downloaded the .run file from AMD's website
Built packages for both AMD and Intel side of the card
Unpackaged said packages
I used ATI Catalyst's GUI to install (in hindsight terminal might have been better and more informative) and it is now saying
After installation of the generated package, it is important to save your X Window configuration file, and then run 'aticonfig --initial' (in a console window) to complete the basic configuration, please run aticonfig from a console window or AMD CCC:LE from the Desktop Manager Menu
So how and why do i save my X Window config and when I give the aticonfig command it says no adapters detected
View 9 Replies
View Related
Aug 19, 2010
I have been unable to get both opensuse 11.2 and 11.3 32 bit versions work properly on my DELL Latitude E6410 laptop. With both 11.2 and 11.3 KDE Live CDs I get no graphical display when I attempt to boot into the Live system. VESA mode does not help either, only text mode works. So I installed the system in text mode but during the first boot the screen went blank again.
One peculiar thing is that 11.1 installs and boots fine, what gives? Is this even supported or I shouldn't even try to bother getting this setup to work? Has anyone been able to run opensuse 11.3 on a Core i7 integrated Intel graphics system with X system working?
View 9 Replies
View Related
Jul 30, 2011
Ok so I have found the help doc in the ubuntu community spot and it says to run the following command,
Code:
grep -i switcheroo /boot/config-2.6.*
And I do that and nothing happend, so i though ok maybe i missed something and moved to the next step to see if the switch file is there and I do,
Code:
ls -l /sys/kernel/debug/vgaswitcheroo/switch
Says the file can not be found, and according to the post on the community help spot VGA_Swicheroo is not enabled, well my problem is how do i enable it and use it?
View 2 Replies
View Related
Nov 10, 2014
I'm on an HP envy with with hybrid graphics configuration. I installed debian 7.7 from DVD, but it failed to load i915 driver on its own. It loaded nouveau. But gnome falls back to classic mode. There is not brightness control either.I tried adding i915 to /etc/modules and also blacklisted nouveau at the command line. Now i915 gets loaded, but with some hickups as shown in dmesg. Still I'm in fallback mode in gnome.
Code: Select alljay@aura-envy:~$ dmesg | grep drm
[ 16.152467] [drm] Initialized drm 1.1.0 20060810
[ 16.161706] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
So I went ahead and added intel_agp (before i915 line) to modules file, but still no luck. I suspect there is no module called intel_agp at the first place, because :
Code: Select alljay@aura-envy:~$ sudo modinfo intel_agp
[sudo] password for jay:
ERROR: Module intel_agp not found.
URL....
View 2 Replies
View Related
Jan 30, 2009
This week I picked up a Dell Studio Hybrid and installed CentOS on it. I originally used 5.0 since I already had the DVD and the network card wasn't recognized at all (lspci recognized it but the card didn't show up in system-config-network). I then downloaded the 5.2 DVD and installed that. The network card then showed up in system-config-network but it still didn't work. If DHCP is enabled it tells me that no link is present, and if I manually configure it, I still can't ping the router. lspci reports the following about the network card:
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
The driver used is r8169.
I put Fedora 10 on it and the network is working fine, but I'd rather run CentOS on this machine. Is the issue likely to be fixed with CentOS 5.3 or should I just stick with Fedora?
View 11 Replies
View Related
May 24, 2010
This card has been the bane of my existence for a while. In the old days I could get it to work with Fedora using a generic video driver. A friend recommended OpenSuse because of my love for KDE.
The good news is that install went greeeeat. But after that, I once again got a black screen with a line randomly done it. Is there a way to change? I tried changing those resolution options but it didn't work. I have the Windoze driver from Dell's site. Its Dell Inspiron 5160.
View 8 Replies
View Related
Mar 21, 2009
I am having trouble getting my USB-Dvb-Analog-Hybrid-TV-Card running with openSuse 11.1. (I already tried a lot of instructions I found on the net but none of them worked.) For example, when I try to install em28xx-new, compiling will work, but when modprobeing:
[Code]....
View 4 Replies
View Related
Apr 20, 2010
Im making plans to buy a 15" Dell Inspiron notebook as it's currently the cheapest 15" notebook which is available in my country, and from what I have read, the Dell WiFi card used in the notebook is Broadcom based, and that Broadcom had recently released hybrid drivers for their cards. Now, after browsing through OpenSUSE's HCL [URL] it seems that a patch to the drivers is needed.how do you patch the driver? Do you just go to <extracted driver directory>/src/wl/sys/wl_iw.c and just throw in this whole chunk of text anyway into the file, or is there something more to it?
Code:
@@ -580,6 +580,7 @@
range->enc_capa |= IW_ENC_CAPA_CIPHER_TKIP;
range->enc_capa |= IW_ENC_CAPA_CIPHER_CCMP;
range->enc_capa |= IW_ENC_CAPA_WPA2;
[code]....
View 6 Replies
View Related
Apr 28, 2010
I am using CentOS 5, I have recently installed it on my Dell LATITUDE laptop but the resolution was 800x600. I've tried to put it on 1680x1050 and it worked out well I guess but the graphics had become very slow. For example I have to wait 5 to 6 seconds to scroll from page to page in a pdf file. Minimizing a window takes also a lot of time. I have a NVIDIA card in my PC.
View 5 Replies
View Related
Apr 2, 2010
I have a brand new OptiPlex 780 from Dell, I downloaded CentoOS x86_64 from [URL]. The installer runs the graphics mode OK, when I reboot into normal, the graphics doesn't work.
The last messages I see are:
Red Hat nash version 5.1.19.6 starting
starting clock,
starting UDev
then the display goes away, the montior says "Not Support" The monitor is 1 day old and supports VGA to 1680x1050.
I try pressing "I" (and/or "i") when Red Hat first starts, but the interactive menu doesn't show.
I have two idenical machines, the other is running XP (the CentOS was also before I loaded CentOS), WinXP is allowing screen resolutions of
- 800 x 600 @ 60Hz, 72Hz, or 75Hz
- 1024 x 768 @ 60Hz, 70Hz, or 75Hz
- 1280 x 1024 @ 60Hz or 75Hz
- 1680 x 1050 @ 60Hz
...all working on the same monitor.
During Bios boot, the monitor shows 600x800 @ 60Hz, during the text-only start of CentOS, it shows 720x400 70Hz. After CentOS boot shows starting udev, the montior breifly shows 720x400 70Hz, then "Not Support".
So....
Why isn't CentOS using the same graphics mode it used during installation (that worked fine)
View 1 Replies
View Related
Jul 14, 2011
I have installed openSUSE 11.4, and I really like it compared to other linux versions I've tried, but I find it requires a bit more linux know-how.
Being fairly new to linux, it has been quite the effort to learn but I started getting the hang of things via online support and such. Lately I've been having some problems.
I need linux to run a TCAD program, and it requires some openGL functionality and was giving me errors when I tried entering the software related modeling GUI.
Anyhow, I thought it had to do with my graphics drivers, so I decided to update them via ATI proprietary driver. After doing this, the system booted me into the console rather than X.
I tried numerous online guides on how to fix the issues, by running all sorts of boot commands (nomodset), and I read the graphics driver theory, as well as trouble shooting ATI graphics.
In the process, I also installed a radeonhd-xorg11-something through YAST, and that caused a black screen altogether upon boot. I managed to boot into failsafe with x, and from there I removed it via YAST, however this did not resolve issues. I also deleted any xorg.cionf files in hopes that the system will default back to the radeon driver.
As it stands right now, I can only boot into my system via failsafe mode. I'm keeping the unit off for now as it's probably tired from all the hard reboots I had to do . If someone can help me resolve this issue, I can turn it on and enter any commands required, such as finding out the graphics card, the kernel, the driver currently running, etc and I can post it here.
View 9 Replies
View Related
Oct 22, 2010
we have a laptop (dell latitude xt) on our company, and we would like to install ubuntu on it. windows 7 works fine out of the box, so the hardware is fine.since this laptop has a touchscreen we just installed ubuntu 10.10 netbook edition 32x.But, we do not manage to enable the touchscreen, neither the vga graphic drivers.
View 1 Replies
View Related
Jan 8, 2010
I have been trying to convert our backup web server, Dell PowerEdge 2850, from Windows 2003 to Ubuntu.The box had been hosting a couple of web sites for the past 4 years. It was light stuff, PHP/Joomla on Apache 2 and DotNetNuke on IIS. There was also Apache Tomcat on there. Recently, we also added Subversion and TeamCity for version control plus continuous integration. All of the .NET stuff has been moved over to another server that we acquired. Right now I am trying to get Sun Glassfish 3 and Alfresco WCM to run on Windows on the old server, but it is a major pain in the butt. I could use OpenSolaris, except there are a couple things that are easier in Ubuntu. The box must also be able to run FreeNX properly so that my boss, who is a GUI guy, will be able to log in to a desktop. That leaves Ubuntu, since I am somewhat familiar with it.
I was able to get FreeNX, Glassfish and Alfresco (up to a point) to run using a Turnkey Linux image. The problem is the server is proving to be difficult. I tried starting with the desktop 9.1 CD that I downloaded; however, there is massive graphics corruption on the desktop. It'll boot fine to the Gnome desktop, but the system will become really slow and the windows disappear, leaving just a border. Switching to another VT shows blurry, shaky text. I suspect there is an issue with the graphics driver, but I can't even type in any commands to find out what is going on.
I also downloaded 9.04 Server edition and it installed fine with no shaky text. How hard would it be to build on top of that for XWindows and FreeNX to work? Why is the text shaking in the first place?
View 2 Replies
View Related
Oct 25, 2010
I have an older Dell Inspiron 4550 w/ 2G memory and 38G HD. I believe I have GE440 graphics card. I am running 10.04, but the graphics are slower than I would like and when I tried to upgrade to 10.10, my card was not supported and I had to re-install 10.04.
- Can anyone recommend a good graphics card to choose for an upgrade for this machine?
- Is changing graphics cards pretty much the same as installing a memory chip, What is the best way to do the upgrade?
View 6 Replies
View Related
Feb 21, 2011
I installed Ubuntu 10.10 32-bit on a Dell Optiplex GX240, it has an ATI Rage 128 Pro Ultra TF (from lspci output) and all the graphics run very slow (I'm assuming because OpenGL and hardware acceleration are disabled). I Googled the issue and found several solutions but non of them worked. I tried installing the ATI Catalyst driver but it doesn't recognize the graphics card. I also tried to install the fglrx drivers but when I run fglrxinfo I get a segmentation fault. So the X server is running with the open source (r128) drivers and it's really slow.
View 2 Replies
View Related
Apr 2, 2010
I am also new to ubuntu but have manage so far,except for my tv-card. Seems like Metv and kaffeine cant see the tv-card ?! I have a asus mycinema-p7131 hybrid,does someone have info on installing this ? except for this i think ubuntu 10 is great.
View 1 Replies
View Related
Sep 27, 2010
When I run the openSUSE-11.3-GNOME-LiveCD-x86_64.iso from an usb stick and select "Installation" or "openSUSE Live (GNOME)" the screen goes to black after showing the load bar for a while.
This is most likely a graphics driver issue but I have no idea how to fix it.
This happens on a dell precision M4500. The same usb stick works fine on another machine.
View 3 Replies
View Related
May 25, 2010
I have a PCI graphics card, Nvidia Geforce FX 5500, but can't get it to work. I have 10.04 installed on a Dell Dimension 3000, P4, 1Gb RAM, integrated graphics. I installed 10.04 without the card in the machine, then shut down and plugged the card in and booted it up again (BIOS setting is 'onboard' for integrated graphics, 8Mb; only other option is 'auto'). Checking the hardware drivers I can see the recommended Nvidia drivers (v173, not yet activated) and lspci gives me the integrated as well as the Nvidia listing:
01:02.0 VGA compatible controller: Nvidia Corporation NV34 [GeForce FX 5500] (rev a1)
00:02.0 VGA compatible controller: Intel Corporation 8286G Integrated Graphics Controller (rev 02)
So far so good, but that's where it ends. Changing the BIOS setting to 'auto' turns the screen off on reboot, both for the monitor connected to the VGA port of the Nvidia card and for the monitor connected to the VGA port of the motherboard. I have to shutdown, take the card out and set the BIOS back to 'onboard' to be able to boot again (and shutdown, plug the card back in and boot up again to get back to where I was).
Activating the recommended hardware driver and rebooting (still with BIOS set to onboard) gives a blank screen (screen is still on and there may have been a flash of the purple screen with the ubuntu logo); nothing else happens no matter how long I wait. Rebooting doesn't help, it turns off the screen; same result for booting in recovery mode. I can get to the GRUB bootloader and when I replace 'quiet splash' with 'nomodeset' I manage to boot again with the monitor connected to the VGA port of the motherboard, but am not anywhere closer to getting my monitor working on the Nvidea card.
View 5 Replies
View Related
Aug 30, 2010
I have an old Dell Dimension 3000 Desktop computer which used to run Windows XP but I installed Linux Ubuntu 10.04 32-bit onto it. It has a pentium 4 2.8Ghz, 1GB of ram(I think), a 120GB HDD...etc. Anyway, so when I install Ubuntu I try to install the graphics drivers for it. I go to intels website. There were two drivers available for Linux for my adapter:
the i915graphics and a intelgraphics driver. Both were tar.gz. When I try to install them, it can't for some reason. I tried "sudo sh" in terminal, I tried extracting the package and executing it...etc. Nothing works. It does give me a message in terminal though.
View 8 Replies
View Related
Dec 19, 2009
I can't install OpenSuse 11.2 on my Dell latitude XT notebook.
1. I tried DVD x86-64 install. The process seemed ok, but after installing Suse can't boot - with its any menu item. Booting seemed ok, there was no errors in screen lines, but when GUI seemed try to load (the screen became colored), all freezed. VGA menu item and other boot menu options did not save the situation. Repeat booting from DVD with Recovery option showed not mount or not correctly unmount fs (which couldn't be corrected by recovery program), some not fatal difficulties in the core and other minor and correctable errors. But after recovery process the picture was the same.
2. Then I tried net install. The same picture.
3. Installing to clean hd... The same. (Manual partitioning - the same too.)
I will not describe my numerous different attempts (and wast time spent for net downloading), so far as I thought that the matter was in my adjustments in the installing process, because other Linux distributive (such as Mandriva, Ubuntu etc. tried by me) were installed without the slightest problem at the Latitude XT.
4. Then I downloaded and installed 11.1 version of Suse. There was only some minor errors, and booting was normal. But there appeared some problems with downloading from repositories and I couldn't update it to 11.2; and installing 11.2 over 11.1 from DVD resulted to the same problems.
5. After I searched this forum, I've tried different installing options (noacpi and so on) at last.. But without any result and any change.
View 9 Replies
View Related
Jan 12, 2010
My Dell Vostro 1520's Dell Wireless 1397 WLAN Mini-Card must not have been set-up correctly, as the Network Manager won't even let me select the wireless tab. Please just explain to me, step by step, what exactly I must do to make it work! Additionally, I can't figure out how to disable my Touchpad's Tap to Click funtionality, which must be done if I'm to effectively use my current KDE installation of openSUSE
View 9 Replies
View Related
Feb 20, 2010
I have not used Linux in some time (I used to use it back when suse 8 was still out and mandrake linux was still around).
Recently I decided to give it another go and downloaded both the LiveCD and the DVD (both 64-bit versions AND 32-bit versions).
I have a Dell Studio 1747 Laptop (with the 17.3 screen). It has an Intel i7 1.6GB processor, 4GB ram and an ATI Radeon 4650.
My problem is that the LiveCD just will not work. It gets to its boot menu, but when I press enter on the boot KDE live CD option, it will either try to boot and then freeze, or it will boot, you will hear that startup music, but the display will go blank. Could it be that it cannot handle my display or the graphics card on the laptop?
Unfortunately I have Windows 7, which doesn't seem to be supported by the windows installer on the DVD, so I can't test if it would work that way.
I must admit that ubuntu has given me the same grief, and so I wonder if maybe the laptop isn't yet supported properly by linux yet?
how I could use a live system or something, to at least try linux for a few things (I would need to retain windows for games and stuff). I'm not into resizing partitions and things, so I would prefer something else that could work.
View 9 Replies
View Related
Mar 25, 2010
I have a qzd netbook with opensuse 11.2 running but I cannot get the graphics working. I have tried "startx" and get the following:
xauth: creating new authority file /root/.serverauth.4650
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
[Code]...
View 4 Replies
View Related
Dec 21, 2009
I was looking to get glx to work with direct rendering. So i installed the nvidia drivers from the openSuSe Sight. I installed because /var/log/Xorg.O.log Said that the Nvidia card was not loaded. Long story short looks like the card is loaded but X windows... I guess GLX is not running and neither is Opengl. I still have output to the monitor. here is
[Code].....
View 9 Replies
View Related
Jun 25, 2010
I have unfortunately found myself unable to properly boot up openSUSE because I decided to buy the Acer Aspire with the i5 Processor.
I have the Intel Graphics Media Accelerator HD (GMA HD) graphics card, and unfortunately from all my searching online and on openSUSE, I have been unable to find a driver for this that works for linux, and in addition I don't know how to install a driver outside of a GUI.
My openSUSE boots up to the boot choosing screen (regular openSUSE or failsafe), and then that nice list of functions being done is displayed, but as soon as the daemon has started, suddenly my screen goes blank and I am unable to do anything about it. Beyond this point, my OS loses all functionability, and while I can hear it computing, I am unable to actually tell WHAT it is computing. get a driver for this and to install this driver and get this GUI running, that would be great.
View 7 Replies
View Related
Jun 27, 2010
I just installed 11.3 RC1, but I can only run in failsafe mode. Installation went fine and I'm not having any problems except that when my computer gets ready to launch my login screen it just display garbled graphics. I have tried multiple resolutions and the x11failsafe option, all with a no-go. I did see this error message pop up at the time of garbled graphics on one login: [GPU LOCKUP, switching to software fbcom]
View 1 Replies
View Related
Jul 30, 2010
I have a z9 volari Graphics card that opensuse 1.2 is recognising but the xgi driver is not present. I get the following when I startx:
auth: creating new authority file /root/.serverauth.4650
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
[Code]....
Perhaps my last post about this was too long and hence why nobody responded. So i will try and keep it simple and let the experts advise me.
I have tried installing an rpm that I got from rpm search. Namely xorg-x11-driver-video-xgi-1.5.0-6.1.i586 which seemed to install but when I did a query it said it was not installed, but when I tried to do an install again it said it was already installed ??
There is also a file called xserver-xorg-video-sis_0.9.3.orig.tar.gz which i got from this site. I have not managed to extract it properly yet but will look into that myself. It appears to have in it a makefile, so I presume it is source files and I could really do with some help in that.
View 2 Replies
View Related
Sep 12, 2010
I was reading the latest openSUSE news #140 under the kernel information and I found something I felt anyone interested in the future of Graphics Support in the kernel should read. It was very interesting for me to read and so maybe the same for you.
Kernel Log: Coming in 2.6.36 (Part 1) - Graphics - The H Open Source: News and Features
View 5 Replies
View Related
