i tried to install fce ultra. i downloaded the source from the site, and followed instructions. Everything seems to have gone well but, when i try to run it, i get a pop up saying
Quote:
gfceux ERROR Code 4:
Could not find the fceux binary.
Ensure that fceux is installed and in the $PATH.
I tried to delete Ubuntu (the newest version, the only one OS on my PC) and install XP after that. I booted from USB and deleted one partition that contained Linux (formated it to ntfs) files using gparted. When I wanted to boot from Windows installation CD, i got the following message:Unknown file system:Grub rescue> I dont know how to proced with installation of XP, it seems it can not boot from my CD.
View 9 Replies View RelatedHow can I install g++ 4.0.2, already have the newest one. but one of my make files says it needs 4.0.2.
View 2 Replies View RelatedSince about half a year ago I downloaded the 11th version of Fedora from the official web page but when trying to install it (I tried booting from cd) it loads everything all right, I get the fedora loading screen, but when it finishes the loading remains so, I doesnt mark errors or anything, I get the cursor on the black screen, the HDD LED turns off and then it remains just like that, I left it up to 1 full hour and from there nothing happens, also tried the ubuntu 9.04 and it is exactly the same, after loadint everything ok, it reaches a point where the screen goes black with a cursor and the HDD LED goes out , the cursor keeps going and it gets stuck.i readed a few time ago that this happens because my video card (which was integrated in the mb) did not support these versions of linux, then i bought an Nvidia GeForce FX 5200LE 128mb card and same thing happened, a couple of months ago i was using a P4GEMX ASUS motherboard with 760 RAM and HDD 160 gb IDE drive. I gave up and leave it for peace.
Today I use an D865GBF Intel motherboard with 1GB of RAM, same video card Nvidia Geforce FX 5200LE and passes the same thing, also tried to install Windows 7 and reaches the point where it shows the wallpaper just before the installation options but nothing happens and it stays right there .. the pointer disappears, I gets stuck in the wallpaper and yet again...the HDD LED goes out, I am very confused, I changed every piece of the pc, new motherboard, new rams and nothing, the only thing that I am still using of the old pc is the hard drive, also tried another HDD, one of 60gb GHola que tal, very good afternoon to all, is the first time I write in the forum and my problem is this:
Since about half a year ago I ordered a cd of ubuntu 9.04 version when trying to install (if I try booting from cd) load all right, I get the ubuntu loading logo, just finished loading and remains so, I mark errors or anything, I get the cursor on the black screen, the HDD LED turns off and now ... just so he stays, I left it up to 1 full hour and from there nothing happens, also try booting linux from the cd (without making changes to your computer) and it is exactly the same, try also with Fedora 11 and it is exactly the it reaches a point where the screen goes black with a cursor and the LED goes out there hard drive, the cursor keeps going and is just lei long that this was because my video card (which was built in) did not support these versions of linux, then buy a Nvidia GeForce FX 5200LE card and same thing happened, was a P4GEMX ASUS motherboard with 760 RAM and disk 160 gb IDE drive. I gave up and leave it for peace.
Today I D865GBF Intel motherboard with 1GB of RAM, same video card Nvidia Geforce FX 5200LE and passes the same thing, also try to install Windows 7 and reaches the point where it makes the wallpaper to give after the installation options and stay there .. falls short of options, the pointer disappears, I stay in the wallpaper and for varying the harddisk LED goes out, I am very surprised and totally changing equipment, new motherboard, new ram and nothing, the only thing that I am using the above pc the hard drive, also try another 60gb hard drive and same thing happens, it will be??? perhaps I need a SATA hard disk??
i want to install the newest version of Kde ( 4.4.0 - Caikaku )
I'm looking for some yum repository to install it.
I've already tried the kde.repos from [URL], but they only have support KDE 3.5.10. My kernel is 2.6.18-164.11.1.el5 on CentOS 5.3
i got per default python 2.6.2 on my fedora 12. how can i install the newest version python 3.1.2?
View 2 Replies View RelatedI downloaded the latest ClamAV (clamav-0.96-27.1.x86_64.rpm) from the opensuse ftp site and when i double-click on the RPM and choose 'install' it says this:[PK_TMP_DIR|dir:///var/tmp/TmpDir.h1Oz1u] Repository already exists.I looked in the software manager in opensuse to see if it has the latest ClamAV package but it doesn't have the latest package or any package of ClamAV.
View 2 Replies View RelatedI have an opensuse 11.3 install which I want to set up as a network boot server to install Solaris 10 on a Sun Ultra 10 client. According to what I've read, this requires rarpd and tftpd which I've set up on opensuse, but also bootparamd which I can't find for 11.3. It seems it was last included with opensuse 9.2. Does anyone know if it's available, if I could use the suse 9.2 version, or any alternative?
View 3 Replies View RelatedI wanna use firefox for working with codes add-on, but when I run "yum install firefox", there is just Firefox version 3.5.0 beta 4 while the newset version at this time is 3.5.5, so I try to install the newest version of firefox browser.
View 9 Replies View RelatedMy procedure for updating the installed packages was, to klick on the list of packages that are installed in the installation source @ system in YAST and choose "Update if newer version is available". Up to Suse 11.3 Yast automatically chooses the latest version from each available repository that is installed (eg, Packman or Mozilla Build Service). With 11.4 however, I noticed that it only updates a package, if a newer version is avalible in the repository from which the package originally origines. Since I don't want to look through 4 GB of packages manually, whether there are newer versions in another repository available, I ask you if I there is a posibility to get the old behavior of YAST back.
View 1 Replies View RelatedI'm new to the linux thing. I've just installed Ubunto 10.04 on my Dell Studio (Core i7, 8Gb RAM).Whenever I boot Windows now, it takes AGES. Atleast about 10 minutes to be fully operational with decent speed of app loading. I know it's mentioned in the Ubuntu documentation that booting will slow "a little bit" but my 4-months old semi decent computer is now behaving a bit like my Commodore 64 used to when it was on tape drive
View 9 Replies View RelatedWell, today I've installed 11.04 on my laptop. Fresh install.I'm getting the following temps (idle)
Code:
Adapter: Virtual device
temp1: +64.0�C (crit = +126.0�C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +81.0�C (high = +100.0�C, crit = +100.0�C)
[Code]...
I have a creative live ultra web cam and fedora 10, is it possible to set this camera up and use it? i am sort of a noob but am learning very quickly.
View 6 Replies View RelatedIn an attempt to install specific video drivers for the Intel 845 chipset, I followed the instructions here: http://www.downloadatoz.com/driver/a...ntu-10-04.html
Now, the system will only boot in recovery mode, and then at 640x480 resolution. When booting, it gives the option to return to default or manually configure, but if I try to select either option and click OK, nothing happens. Once in the GUI, it shows no proprietary hardware drivers installed. Is there a way to roll back the changes I made, or return to more default settings without reinstalling the OS?
Does anybody got Creative Live Ultra VF0060 web cam worked on Ubuntu 10.04.2? This one got recognized by system when I use lsusbs. But either cheese or some other software doesn't recognize that.
View 1 Replies View RelatedI have small home atom-server on netbook (with damaged screen) with Intel Atom N450 1.6Ghz CPU and 1GB of RAM. I am looking for web server, that would not eat much resources when hosting wordpress blog (up to 50-100 readers at once in veeeeeery far future) - posts in most cases will be only text based, without big images or archives (I'm not sure if it is important).The brain of my atom-server is latest 32-bit ubuntu server, without X's, I access it from ssh console only. It is already:
- proxy gate for my internal network (squid)
- my gmail backup/IMAP (dovecot & getmail)
- file server for my internal network (samba)
[code]....
So, I've got as far as partitioning the hard disks on my Sun Ultra 450 Enterprise system, but it always fails with:
SILO (Sparc Linux Loader) can only boot the kernel off of a disk with the "sun" partition table. In the current partitioning scheme the kernel is going to be installed on the /boot partition located on a disk with the partition table of type "msdos".
What is this error message trying to say in its ambiguous way?
I selected automatic partitioning, but it got me to the same place as manual partitioning before it failed in the same way.
I installed four used hard drives in this system - they may have come from PCs for all I know. However, they are SCSI SCA drives, which makes it hard for me to believe they came from a PC environment.
If they did, do I need to to a low-level (or high-level) format of these drives to wipe out the "msdos"ness of them? If so, how do I do that in the SILO installer?
I have successfully installed Debian on a Sparc Ultra5, 270MHz SparcIIi CPU, 384MB RAM, 40GB HD. However, once Debian tries to load Gnome (right before the login screen) the screen goes blank, and so the machine becomes unusable. I booted of the NetInstall CD, into rescue mode, and executed a shell, but apparently there is currently a problem when running nano from a live CD, so I can not edit the xorg.conf file when I boot the live CD. So, I would like to just boot the install into single user mode, but I dont know how. Currently, when the Ultra5 is powered on, it tries to boot with command "boot", so I hit "Stop A". From there I type "boot Disk1" to boot Debian normally. To boot from a CD, I would type "boot cdrom" So any idea on how I can boot from Disk1 in Single User Mode?
My only other idea is to hook up another monitor I have which may be able to deal with whatever resolution Gnome is defaulting to. However, Id rather just boot into single user mode.
I recently upgraded to Ubuntu 10.10 and I am experiencing an ultra high memory usage of the gnome-settings-daemon of 2GB after suspend! Killing and restarting the daemon solves the issue. Anybody else with this behavior?
View 6 Replies View RelatedI have setup a Sun Ultra 2 with Debian 6. It currently has dual 200MHz sparc I CPUs, 512MB RAM, and a Creator 3D 15MB video card. I have in the mail on its way to me dual 300MHz sparc II CPUs and enough RAM to max this thing out at 2GB. Anyway, I am currently having an issue configuring xorg.conf. The only resolution available to me is 1152x900 (which isnt even a supported resolution by my monitor), but Id like to use 1280x1024. I have tried for probably over a week now to no avail. I will paste my current xorg.conf file (the relevant parts), and please keep in mind that I have been messing with this file for a while so sorry if it looks bad.
View 8 Replies View RelatedI own a "Logitech, Inc. QuickCam Ultra Vision" web cam with a microphone. I have successfully installed it, I can get fedora to recognize it and even view video through all the web cam applications I've tried including vlc, cheese, and camstreem. It was automatically detected by Fedora and took no "tweaking" of my own. The problem I'm having is I don't know how to access the audio. When I go to the pulse audio applet or volume contol (mixer) I can see my quick cam as in input, and I can even watch the audio meter move and respond to sounds I am making. But I don't know how to tell any applications where to get sound from... my video source is /dev/video0, what is my audio source? Since my audio level meter moves when i say things or make sounds, I assume it is there and ready, I just don't know how to access it. I figure this should be pretty simple. I'd like to be able to record video/audio, or even just use the mic separately.
View 1 Replies View RelatedI have Bolutek BTD-6610 Ultra long range dongle. It supports only 7 simultaneously connections. I'm using Fedora core 14. Can you recommend me another ultra long range dongle with more than 7 simultaneously connections.
I' mean is there dongle which support 50 or 100 simultaneously connections and supports Linux?
I'm running a Geforce FX 5900 Ultra with nvidias 173.14.27 driver. I'm running slackware 13.1 with kernel 2.6.35.5.
I get a horrible slowdown which is noticeable in emulators such as bsnes and kega fusion. I also think it's responsible for other issues that involve zsnes flickering like mad and hanging. Zsnes will actually crash if I select any filter plugins with opengl output modes.
Kega Fusion slows down to a crawl (we're talking 10 fps) immediately before loading a rom. Playing a rom makes it even slower.
Bsnes has the same kinda slowdown as kega fusion (even worse since it's so cpu intensive) when I activate scanlines or any type of output filter with opengl. Otherwise with no filters and just plain opengl it seems to run fast like it should...
Gens-GS doesn't seem to enable any filters in fullscreen mode... They work however in windowed mode with no slowdown issues...
I've compiled and installed SDL 1.3 from hg repository, then recompiled bsnes just to test it with newer SDL. Unfortunately the problem persists even with a newer SDL version which thankfully for me means I can revert to the older stock SDL without having to recompile everything else haha!
It's funny because I thought these issues were related to the emulators and not the video card drivers. I had these issues for a couple years running ubuntu and trying other distros. When I installed Slackware 13.1 I decided to try my Radeon 9700 pro and kega fusion no longer had this slowdown issue! I switched back to my Geforce and installed nvidia's drivers and immediately had slowdown issues... I'm gonna switch back to the radeon card and test the other emulators but otherwise it'd be nice to know if there's a solution to this issue...
Ok I installed my radeon card: nvidia-installer --uninstall, then updated xf86-video-ati from 6.13.0 to 6.13.2. Even though kega fusion runs fine I get even worse problems with everything else! LOL so I'm going back to my geforce card.
I have the version 9.04
how can i download the newest version?
I have been running Ubuntu 9.10 ever since it was released, on my HTPC. However, for some reason when a new kernel comes out and I upgrade to it GRUB 2 doesn't load the newest kernel but just loads the old original kernel that came with it when I originally installed 9.10. I have confirmed that the newer kernels are installed by editing the GRUB 2 command line at startup (just a temporary fix) and all worked well with the newer kernels. How can I make GRUB 2 load the newest kernel by default. On my laptop running 9.10 it has loaded the newest kernel by default ever since I installed it but my HTPC just won't cooperate.
View 3 Replies View RelatedAre there plans to put the newest OpenOffice 3.2.1 into the repositories; plans to update it automatically?
View 9 Replies View RelatedThe most recent upgrade for transmission has broken the package.I think it is a dependancy error between transmission-cli and transmission-gtk requiring a different version of transmission-common than what's available.I have Kubuntu 8.04. Here's my output:
$ apt-get install transmission
Reading package lists... Done
Building dependency tree
[code]....
i was just wondering what is the newest kubuntu netbook remix out
View 4 Replies View RelatedAnyone know where i can download the newest packet tracer for ubuntu?
View 9 Replies View RelatedI had done the upgrade from 10.04 to 10.10 online and couldn't boot to newest kernel and had to select the previous one in GRUB. From what I have read it may be because of NVIDIA drivers or some conflict. Anyways,I did a fresh install of 10.10 from the Live CD overriding my 10.04-to-10.10-online-updated partition so I do not have an option to boot older Linux kernels now. I was wondering if the Live CD could be used to install any previous linux kernels for the new installed Ubuntu 10.10 system.
View 8 Replies View Related