I recently upgraded to Ubuntu 10.10 and I am experiencing an ultra high memory usage of the gnome-settings-daemon of 2GB after suspend! Killing and restarting the daemon solves the issue. Anybody else with this behavior?
View 6 RepliesMy problem seems to be very simple, it's high memory usage. I occasionally will use movie player to watch a few shows and I use firefox as well. My memory usage starts out real small about 500 mb but after using firefox lightly and movie player it jumps to almost 2 gigs and this is after they've been closed what gives? I've attached an image so you can see what I'm talking about.
View 7 Replies View RelatedI've installed my debian sid about one month ago (first xfce, next gnome) but noticed that it's kind of really slow. The upgrades take ages, launching (and using) firefox takes so much time,... In comparaison to my ubuntu, archlinux (on the same computer) or previous installation of debian there is clearly a problem somewhere.Today I tried to do a "top" sorted by mem usage : 3.5% xulrunner-stub, 2.1% dropbox, 1.4% aptitude (doing upgrade), 1.4% clementine,... nothing terriblebut still I've 2.7Gb or RAM used (more than 50%)
$ free -m
total used free shared buffers cached
Mem: 3967 26851282 0 79 1938
[code]....
I upgraded from Fedora 13 to 14 over the network. Everything seems to have worked. The one problem after my install is that I have noticed that setroubleshootd consumes alot of memory.
[Code]
It doesn't take long for setroubleshootd to jump in memory usage. I can kill the process but it will start up again. I have tried disabling the service but it doesn't show up in /etc/init.d. # service setroubledshootd stop setroubledshootd: unrecognized service So I am not sure what I can do to resolve the issue with setroubleshootd besides killing it off every 15 minutes.
In our database, when checking the memory used using top command, we are always seeing 32 GB RAM utilized. We have set the sga_max_size to 8gb and PGA to 3 gb. We have tried shutting down oracle db and then the memory went down to 24GB when checked using top command. After cold reboot of the DB server, it gone down to 1.5 GB.
But once the users are started using after end of day, the memory again gone back to 32 GB.
Top Command output (truncated)
======================
top - 15:18:27 up 5 days, 19:43, 1 user, load average: 0.55, 0.39, 0.32
Tasks: 599 total, 3 running, 596 sleeping, 0 stopped, 0 zombie
Cpu(s): 1.5%us, 0.4%sy, 0.0%ni, 97.9%id, 0.1%wa, 0.0%hi, 0.1%si, 0.0%st Mem: 32949628k total, 32823336k used, 126292k free, 238808k buffers
[Code]....
Basically I have a machine with 16GB of RAM and have just discovered that using all of it can crash the whole system over one process. How could I run a process on the system in such a way that if more than 90% of system memory is used, the process immediately crashes?
View 3 Replies View Relatedi am having a problem that i would call a bit "important" with my server. so, from last 3 weeks the used space of my hard disk (RAID I) started growing up. i have 2 x 1 tb HDD working on RAID I and i did not install anything those weeks. the space just started changing from 90 GB till 580 GB. now the situation is stable there but i think it's not normal.
the bandwidth usage is low (like 120 gb in 2 months) and i am running 6 counter strike gameservers, a forum, a very little website and some local stuffs... a friend of mine told me that my server could have been hacked but i am afraid it did... some useful informations: when i reboot the server the used space goes down again to ~100 GB and then it starts going up again. i cant really find where all those files are located:
[Code]...
I was browsing my folder with lots of images, after finished i close nautilus and i notice that my computer became slow, so i'll check it with system monitor and had found that nautilus are using almost 100mb of ram (opening 4 tabs). I'm not sure if this was normal or not because i try to reopen the same folder with pcmanfm and it only consumes less than 20mb of ram (opening 4 tabs).
here's the screenshot from system monitor .
Gnome-shell uses high percent of CPU (more than 90%) on Xorg. I have debian jessie on a Asus N53 ( Core i7 and Nvidia GT550 with nvidia optimus). I also installed bumblebee but nothing changed.
View 0 Replies View RelatedWell, today I've installed 11.04 on my laptop. Fresh install.I'm getting the following temps (idle)
Code:
Adapter: Virtual device
temp1: +64.0�C (crit = +126.0�C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +81.0�C (high = +100.0�C, crit = +100.0�C)
[Code]...
I just installed Ubuntu 10.10 on a brand new HP EliteBook 8540w with an Nvidia card. To get the machine to work at all I have to use the proprietary nvidia driver. The downside is that when I use this driver gnome-settings-daemon seems to crash when I start the machine which results in a ugly theme. To fix this I have to run the following command:
Code:
sudo gnome-settings-daemon
After this the theme is re-applied. If I try to run gnome-settings-daemon as my regular user I get the following messages:
Code:
** (gnome-settings-daemon:2187): WARNING **: Failed to acquire org.gnome.SettingsDaemon
** (gnome-settings-daemon:2187): WARNING **: Could not acquire name
[Code]...
about every second time when I start up my Ubuntu 10.4, my hard drive starts to work heavily. While it's doing so I see in the system monitor that the gnome-settings-daemon has the status 'uninterruptible'. After about 3 minutes the hard drive calms down and the status of gnome-settings-daemon switches to 'sleeping'. so from that I guess the heavy working of the hard drive is somehow related to that process. Sometimes gnome-settings-daemon seems to crash completely so that my theme is gone.
So is there a solution to that? because it's annoying that it slows down the system for about 3 minutes after start up. On the net I've found some old threads from 2004 and 2006 which describe crashing of gnome-settings-daemon. But there didn't seem to be a solution.
I'm having trouble with gnome-settings-daemon in gnome 3. I can start it with sudo and get my pretty theme, but under my normal user it segfaults.
blah@heymon ~/.config/gtk-3.0 $ gnome-settings-daemon
(gnome-settings-daemon:309: Gtk-WARNING **: Could not load named theme "Adwaita": File doesn't exist: /usr/share/themes/Adwaita/gtk-3.0/-gtk-gradient (linear,
[code]....
Setting up CentOS 5.5 on my laptop. After installing the synaptics driver, I am able to get a functioning X session without any problems (I'm using startx for testing). There are however two problems: 0/ mouse cursor is slow as snails and 1/ GNOME is fouled up.
- I've tried enabling SHMConfig in my xorg.conf file, and have also tried the HAL thing here. Either way synclient tells me to jump in a lack. I should be able to set suitable adjustments in xorg.conf, but running synclient -l to see what it's currently using would be much faster than hours of trial end error. As Google totally fails to provide anything helpful and I see nothing handy in documentation beyond the 1-line edit to xorg.conf I've already done, how in the universe do I actually enable SHMConfig to synclient's satisfaction? EDIT: scrolling doesn't work either, so access to synclient is even more important; on the upside I have manually tuned the mouse speed by T&E.
- GNOME was installed through the "GNOME Desktop Environment" and "GNOME Software Development" groups (yum groupinstall GNOME*) after net' installing CentOS. It has been startx'd through gnome-session. On startup I get a string of Windows: one is a dialog saying that there was an error starting the GNOME Settings Daemon with a last error message of "Failed to execute dbus-launch to autolaunch D-Bus session". The other two are dialog windows gripe about mail notification. Several icons are missing but gnome otherwise works fine, as long as I do nothing that requires SETTINGS. Searching the web and documentation hasn't helped here either, so how the flub do I fix that?
I expect to be using blackbox or something lighter most of the time, but as GNOME is the default.... it better be working!
The gnome-settings daemon was updated today on my Fedora 11 machine and it's now performing all kinds of interesting activities. It's using my CPU a ton. And it's generating lots of network traffic. This appears to be a massive bug of some sort. Anyone know any more details? I haven't found anything yet.
If you haven't updated it, DON'T!
2.26.1-10 appears to be the culprit.
After I login my desktop preferences are not loaded. If I try to change them (Control cneter-> apparence) I get a message that says: Unable to start the settings manager 'gnome-settings-daemon'.Without the GNOME settings manager running, some preferences may not take effect. This could indicate a problem with DBus, or a non-GNOME (e.g. KDE) settings manager may already be active and conflicting with the GNOME settings manager.The first lines of .xsession-errors show:
/etc/X11/xim: Checking whether an input method should be started.
HOSTNAME: Undefined variable.
XDG_DATA_DIRS: Undefined variable.
[code]....
Getting this error seemingly randomly at login:
There was an error starting the GNOME Settings Daemon.
Some things, such as themes, sounds, or background settings may not work correctly.
The last error message was:
Launch helper exited with unknown return code 1
GNOME will still try to restart the Settings Daemon next time you log in.
I thought I might be logging in to fast, but it happened again when I had waited several minutes.
I am running 10.10 on a netbook (1.6Ghz Atom N270, 2GB RAM). Because it has limited resources, I am currently testing to see which apps I want to use.
Which should take more priority -- an application that uses less RAM or an application that uses less CPU?
I was trying to get the status of memory usage and disk usage using sigar in windows and ubuntu. done this in windows by just copying the sigar library into jdk library. But i was unable to do so in ubuntu. I've copied the library to java-6-sun library but still can't run the program.
View 14 Replies View RelatedI have a computer with 16GB of ram. At the moment, top shows all the RAM is taken, (NOT by cache), but the RAM used by the various processes is very far from 16GB.I have seen this problem several times, but I don't understand what is happening.My only remedy so far has been to reboot the machine.
View 1 Replies View RelatedI am looking for free database that has low memory usage and innodb and memory like engins that has C API and support trigger and client/server support for using in embedded linux systems.
View 8 Replies View Relatedwhat could cause the daemon to use 100% of the CPU? I attached a printed screen file of "top".I am using "likwise" to connect to AD.
View 3 Replies View RelatedI am sure that all of us know the result of top command in linux. i want to get the value that the top command return as CPU usage, memory usage. so how do i do(programming relation)?
View 3 Replies View RelatedI'm running desktop machine with with a core2 duo E6400 with 2GB RAM. I have completed a fresh install of Ubuntu 9.10 (fully updated). I have 10GB root, 2GB swap, 10GB home and 80GB data parititons.
I log in to main administrator account (first boot), create a new user (desktop) account and then use the switch user to log into the desktop account (so logged in to two accounts at the same time).
Whilst logged into the desktop account the CPU usage as seen in system monitor shows the two CPU's alternating at around 100% and the system slows down greatly.
Ubuntu 9.04 64-bit I just checked my system monitor and it looks like my memory is at a constant 900 MB's out of 4 gigs of ram. This seems high for only having firefox open.
View 5 Replies View RelatedI have recently upgraded from Kubuntu 9.10 to 10.04. I am having trouble with CPU usage by the X server. When running KDE programs (for example Kontact and Amarok) my computer is becoming very sluggish. This seems to be because X is using 90-100% of the CPU constantly when there are any changes to the application (any sort of redraw, even the mouse moving across the screen). I don't experience this with other applications (I am currently writing this from Chromium with no issues at all). Below is all the relevant information I can think to include.
INSTALL PROCESS: Fresh install from Ubuntu 10.04 LiveCD. My /home direrctory is on a separate partition so that has remained unchanged from 9.10. After installing Ubuntu, I installed the kubuntu-desktop package to install kdm and the KDE desktop.
The only real change from my last install is that /var is now also a separate partition (in a bid to save my MySQL data should I have to reinstall again) but it is on the same hard drive as my root partition and so shouldn't be causing any performance issues.
MY X SETUP: Three screen setup using onboard and PCI graphics cards. This worked perfectly before and, after reconfiguring X using nvidia-xconfig works almost as well again. Except that one of my monitors autodetects at 1280x1024 where before it was a higher (and widescreen) resolution.
The issue only presents itself when KDE application screens are visible and disappears when they are hidden (either minimised or closed) As far as Ican tell it could be an X, Qt or KDE issue. But I am not sure what versions of these will have been changed in the upgrade.
I don't understand why I have a 800MB usage at startup. I didn't add any programs to start at startup. I do though have 10 primary partitions that are auto mounted at startup but it shouldn't use up so much, I have 2GB total RAM.
At startup nautilus uses ~400MB of virtual memory in the "system monitor"
Also which is RAM and which is SWAP in resources in system monitor: Virtual Memory && Memory?
-i figure vm is ram but thats not possible sometimes...it exceeds 2GB
I play RuneScape most of the time i'm on the computer and i always keep an eye on the performance. Yesterday and the days before, everything was going good, cpu usage it was causing was between 30 and 60%, now it wont go below 70%. It's always 70-99% for some reason :s i have set settings for graphics to OpenGL (they were like that before too with no problem) and it started causing high cpu usage. If i set it to Safe Mode in graphics settings it gets 100%, I never tweaked the drivers, i have a NVIDIA GeForce 9600 GT, i have the opengl thingies installed along with my nvidia driver. Ubuntu 10.10 32bit.
View 1 Replies View RelatedI've come across a really strange issue with one of my RHEL servers. The "free" command shows that 7019 MB of memory are actually in use by my system, but when summing up the actual usage (or even virtual usage like the example below) it doesn't add up - the sum is far less than what is reported by "free":
Code:
[root@server1 ~]# free -m
total used free shared buffers cached
Mem: 12011 7946 4065 0 4 23
-/+ buffers/cache: 7919 4092
[code]....
yesterday when 10.04 got released i decided i'd install it and try it out, when i tried to run a java applet on it (runescape for example) the CPU usage got really high (around 100%), is that normal?
Info about my processor if you need:AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ 2,61 GHz.This is my first time ever using ubuntu.