Since about half a year ago I downloaded the 11th version of Fedora from the official web page but when trying to install it (I tried booting from cd) it loads everything all right, I get the fedora loading screen, but when it finishes the loading remains so, I doesnt mark errors or anything, I get the cursor on the black screen, the HDD LED turns off and then it remains just like that, I left it up to 1 full hour and from there nothing happens, also tried the ubuntu 9.04 and it is exactly the same, after loadint everything ok, it reaches a point where the screen goes black with a cursor and the HDD LED goes out , the cursor keeps going and it gets stuck.i readed a few time ago that this happens because my video card (which was integrated in the mb) did not support these versions of linux, then i bought an Nvidia GeForce FX 5200LE 128mb card and same thing happened, a couple of months ago i was using a P4GEMX ASUS motherboard with 760 RAM and HDD 160 gb IDE drive. I gave up and leave it for peace.
Today I use an D865GBF Intel motherboard with 1GB of RAM, same video card Nvidia Geforce FX 5200LE and passes the same thing, also tried to install Windows 7 and reaches the point where it shows the wallpaper just before the installation options but nothing happens and it stays right there .. the pointer disappears, I gets stuck in the wallpaper and yet again...the HDD LED goes out, I am very confused, I changed every piece of the pc, new motherboard, new rams and nothing, the only thing that I am still using of the old pc is the hard drive, also tried another HDD, one of 60gb GHola que tal, very good afternoon to all, is the first time I write in the forum and my problem is this:
Since about half a year ago I ordered a cd of ubuntu 9.04 version when trying to install (if I try booting from cd) load all right, I get the ubuntu loading logo, just finished loading and remains so, I mark errors or anything, I get the cursor on the black screen, the HDD LED turns off and now ... just so he stays, I left it up to 1 full hour and from there nothing happens, also try booting linux from the cd (without making changes to your computer) and it is exactly the same, try also with Fedora 11 and it is exactly the it reaches a point where the screen goes black with a cursor and the LED goes out there hard drive, the cursor keeps going and is just lei long that this was because my video card (which was built in) did not support these versions of linux, then buy a Nvidia GeForce FX 5200LE card and same thing happened, was a P4GEMX ASUS motherboard with 760 RAM and disk 160 gb IDE drive. I gave up and leave it for peace.
Today I D865GBF Intel motherboard with 1GB of RAM, same video card Nvidia Geforce FX 5200LE and passes the same thing, also try to install Windows 7 and reaches the point where it makes the wallpaper to give after the installation options and stay there .. falls short of options, the pointer disappears, I stay in the wallpaper and for varying the harddisk LED goes out, I am very surprised and totally changing equipment, new motherboard, new ram and nothing, the only thing that I am using the above pc the hard drive, also try another 60gb hard drive and same thing happens, it will be??? perhaps I need a SATA hard disk??
I wanna use firefox for working with codes add-on, but when I run "yum install firefox", there is just Firefox version 3.5.0 beta 4 while the newset version at this time is 3.5.5, so I try to install the newest version of firefox browser.
After a few days of wrestling the xorg.conf file and the akmods/kmod apps, finally have it running properly with a dual display/one graphic card setup BUT only from init 3 and then startx. Trying with init 5 shows a segmentation fault right after recognizing the kmod driver but the sequence keeps running until it after it hits the anacron OK portion. This occurs with an NVIDIA 6800 XT which is covered by the 180.25 driver. Other forum Q&A suggests the wrong driver but NVIDIA recommends this one.
The copyright year in the newest Fedora download shows still 2010. A screenshot has been attached along with this note. Just thought I would bring the same to Fedora Installation Support team.
i tried to install fce ultra. i downloaded the source from the site, and followed instructions. Everything seems to have gone well but, when i try to run it, i get a pop up saying
Quote:
gfceux ERROR Code 4: Could not find the fceux binary. Ensure that fceux is installed and in the $PATH.
I downloaded the latest ClamAV (clamav-0.96-27.1.x86_64.rpm) from the opensuse ftp site and when i double-click on the RPM and choose 'install' it says this:[PK_TMP_DIR|dir:///var/tmp/TmpDir.h1Oz1u] Repository already exists.I looked in the software manager in opensuse to see if it has the latest ClamAV package but it doesn't have the latest package or any package of ClamAV.
I tried to delete Ubuntu (the newest version, the only one OS on my PC) and install XP after that. I booted from USB and deleted one partition that contained Linux (formated it to ntfs) files using gparted. When I wanted to boot from Windows installation CD, i got the following message:Unknown file system:Grub rescue> I dont know how to proced with installation of XP, it seems it can not boot from my CD.
My procedure for updating the installed packages was, to klick on the list of packages that are installed in the installation source @ system in YAST and choose "Update if newer version is available". Up to Suse 11.3 Yast automatically chooses the latest version from each available repository that is installed (eg, Packman or Mozilla Build Service). With 11.4 however, I noticed that it only updates a package, if a newer version is avalible in the repository from which the package originally origines. Since I don't want to look through 4 GB of packages manually, whether there are newer versions in another repository available, I ask you if I there is a posibility to get the old behavior of YAST back.
I had done the upgrade from 10.04 to 10.10 online and couldn't boot to newest kernel and had to select the previous one in GRUB. From what I have read it may be because of NVIDIA drivers or some conflict. Anyways,I did a fresh install of 10.10 from the Live CD overriding my 10.04-to-10.10-online-updated partition so I do not have an option to boot older Linux kernels now. I was wondering if the Live CD could be used to install any previous linux kernels for the new installed Ubuntu 10.10 system.
I am traying to install VLC on RHEL 5.5 I have installed the rpmforge repos rpms.I get this error message everytime:
vlc-0.9.9a-7.el5.rf.x86_64 from rpmforge has depsolving problems --> Missing Dependency: libdvdread.so.3()(64bit) is needed by package vlc-0.9.9a-7.el5.rf.x86_64 (rpmforge)
Ok so i've got a main sound card which is include in my motherboard but it dosn't working(Intel Corporation 82801G)And I've got second sound card which working(C-Media Electronics Inc CM873, but ubuntu detect only first card (Intel) and try use it.Earlier i used alsaconf to set main soundcard but in the newest alsasound version there gone.So i just dont have a sound.I don't know why but sometimes when i turn on my computer sound is it.But after restart there gone.I've got Ubuntu 9.04
I'm running Ubuntu 9.10 Karmic Koala, and the latest kernel upgrade (xxxx.22) won't start the system because it can't find the hard disks. It ends up with a prompt from (initramfs).The computer has an MSI board with Intel P4 Dual CPU, and a Phoenix Award BIOS marked W7037 IMS V1.2, dated 091604 (Sep16/04). I doubt that a newer BIOS that will fix the problem, but if anyone knows I could try to find a floppy drive and a diskette, because they require that to install the newer BIOS (ver 1.3). Does any one have a better method? Is it still possible to get the previous kernel version until they fix this bug (if they ever will)?
Is there a way to change the boot sequence in GRUB2 so the original kernel would be the default even if the rest of the software has been updated? Since 10.04 has several bugs and annoyances, may be it's time to change to another distribution (I've tried Mint 9, but it has much of the same, like having to enter the password if I take a short break from the computer). Many questions at once, but less and less things are functioning with each new revision. For instance to use the scanner I must go back to 8.04, or use WINDOWS! (The scanner is the only reason why I have Windows on the computer).
this is a new problem with issues that started when I upgraded to 10.10. Originally, GRUB wouldn't load after that upgrade, but that was fixed here. Once GRUB was working properly, there was a problem with the 2.6.35-28 generic kernel. When I tried to boot through it, I would only get an ubuntu command line.
Luckily the older 2.6.32-22 generic kernel worked just fine and I could log in and load my ubuntu desktop with no issues. I decided to upgrade to 11.04 to see if that would correct whatever was going on. The installation was completed without any apparent issues, GRUB works, XP Pro works, and the older 2.6.32-22 generic kernel allows me to boot into 11.04.
Unfortunately, another new kernel, 2.6.38-8 generic, is not working properly. I snaped some pictures of what happens when I try to use this kernel:
[URL]
The first is GRUB/ The selection The second is the loading graphic The third is a command line where it freezes (note: this is not the same command line screen/environment that I was referring to with the 10.10 new kernel)
After playing with various Linux distributions over the past 3 weeks (mostly Ubuntu) I decided on Fedora as the keeper. However, when it comes to linux I'm about as green as they come. I installed KDE Fedora today and managed to get Firefox and Flash installed without much trouble. However, I'm trying to download the newest version of Thunderbird but after a lot of looking, how to do it.
i'm an absolut beginner in the world of linux. i'm 22 years old and i used windows all my life but now i think i'm ready to move on! plus i think linux should fit my purposhes regarding computer usage as i'm currently using my pc for academic stuff and i saw there's a superbe program for electronics here (i study physics)!right now i'm using windows xp sp3 and an ancient IBM R51 laptop - Intel Pentium M 1.5Ghz, 512 ram. i'm not exactly sure it fits the requirements as i saw in fedora page i should have >700mb ram.. will i have any problems? will my machine run smoothly even with the newest interfaces (gnome 3.
Recovery mode doesn't work, same problem. Taking the older kernel gives no problem. I have no 3rd party graphics driver installed. 10.04 was a fresh install on this machine. I cannot get a commandline, the screen just shuts down because of a lack of input.
I have been running tomcat as a web server for quite a while. One particular application requires OpenOffice to be up a server for document conversion. Under Fedora 14 (and NOT before), I had to add Xvfb to the mix so OpenOffice could run properly headless. I have a script to start/stop/restart tomcat (S99tomcat) which has been working flawlessly until I did the most recent updates to Fedora. The script still works fine (S99tomcat start) at boot time. However when I invoke stop and then start it due to an application change (or just restart) - openoffice fails to come up whining about xrand
Here is the line I use to bring up OpenOffice /usr/lib64/openoffice.org3/program/soffice -nologo -headless -accept=socket,host=localhost,port=9999,tcpNoDelay= 1;urp;StarOffice.ServiceManager
It took a lot of research to get the above right (open office parameters are sensitive to order on the command line and quotes need to be put around the parameters as there is a semicolon embedde in the accept parameters.
Anyway - here is the new error
Xlib: extension "RANDR" missing on display ":1.0". Xlib: extension "RANDR" missing on display ":1.0". Xvfb is running on Display ":1"
If I reboot the machine this same command set will run fine. This just happened when I applied the newest patches for all my software (normally I do this weekly).
how to get the newest Java Version. My Debian has got Java 1.50.3 as Default. I am running Debian Kernel vers:2.6.26-2-686 on a GA-D510UD Mainboard. I tried to install it with apt-get but it just says that it could not find java. I found a packet at Linux & ebian wiki, but i dont know how to extract it into the root Filesystem /. If i just copy it there Debian tells me thati havent got the permission.
I'm trying to keep a directory full of log files manageable. Nightly, I want to delete all but the 10 most recent. How can I do this in a single command?
I have two directories, dirA whicht contains N gb of data and dirB which is supposed to contain only the newest M gb of data from dirA. When files are added to dirA, they sould also be added to dirB, while the oldest files in dirB should be deleted.Is that possible with rsync? or any other software?
Recently i downloaded the stable version of kernel from kernel.org then i extract the tarball to /usr/src path , then after i complile the kernel for fuse and ext4 modulescommand which i use is mention below
[root@localhost linux-2.6.36.1]# make menuconfig [root@localhost linux-2.6.36.1]# make [root@localhost linux-2.6.36.1]# make modules
I would like to upgrade to the newest firefox. It is 3.6.somewhat. My official Slackware (12.2 - 2.6.27.7-smp) upgrade supported the latest version , which was 3.0.19. Via GUI i could update this, and i did it.
So, now , I installed a new kernel (2.6.35-stable, and modules ). I saw, that I can download the firefox paket from their page, and I did this already some months ago, whith the experience, that this package is some kind of portable executable, means, just unpack it, and run it. It seems, as i do not need to install it ( what interferes in some kind with plugin directories , flashplayer for example. )
But, I would like to build it again, using their old config as mine ( via make oldconfig) and then converting it all to an tgz. My question now is : will this work ? because, I updated my kernel, and went to 2.6.35 but not my glibc, my kernelheaders nor my gcc. Will I still be able to compile this new ff from source and .tgz it ?
Is there a way to get the newest version of firefox on debian stable? Also I downloaded google chrome and installed it but it won't show up in my menu or under installed programs in the software center.
I have been running Ubuntu 9.10 ever since it was released, on my HTPC. However, for some reason when a new kernel comes out and I upgrade to it GRUB 2 doesn't load the newest kernel but just loads the old original kernel that came with it when I originally installed 9.10. I have confirmed that the newer kernels are installed by editing the GRUB 2 command line at startup (just a temporary fix) and all worked well with the newer kernels. How can I make GRUB 2 load the newest kernel by default. On my laptop running 9.10 it has loaded the newest kernel by default ever since I installed it but my HTPC just won't cooperate.
