OpenSUSE Network :: Setup As A Network Boot Server To Install Solaris 10 On A Sun Ultra 10 Client?

May 12, 2011

I have an opensuse 11.3 install which I want to set up as a network boot server to install Solaris 10 on a Sun Ultra 10 client. According to what I've read, this requires rarpd and tftpd which I've set up on opensuse, but also bootparamd which I can't find for 11.3. It seems it was last included with opensuse 9.2. Does anyone know if it's available, if I could use the suse 9.2 version, or any alternative?

View 3 Replies


ADVERTISEMENT

Ubuntu :: Setup Citrix ICA Client 9 On 9.04 Server - Error In Network Connection Network Or Dialup Connection May Be Preventing

May 14, 2010

I am trying to Setup citrix ICA client 9 on Ubuntu 9.04 Server. I installed it very easily and I am not getting any lib error also. But when I try to connect to the citrix server, it fails with a pop up saying "Error in Network Connection Network or Dialup connection may be preventing ......" This is driving me crazy from 3 days. My project is to check the feasiblity of a Linux desktop

View 1 Replies View Related

Fedora Networking :: Home Network - Setup One As Server And The Others As Client

Mar 29, 2009

how to setup a home network for learning purpose. i have two laptops and a desktop connected to a modem-router for broadband (wired connection), i want to setup one as server and the others as client.

View 2 Replies View Related

OpenSUSE Network :: 11.2 Couldn't Setup Network On Install

Jul 4, 2010

I've just installed openSUSE 11.2, one problem is suse didn't find an internet connection when suse performed the ..."automatic system configuration. This routine attempts to configure your network and Internet access and sets up your hardware"... Where can I manually configure the network. I'm in the network folder now no luck. I've been using every documentation I could find Novell Documentation and DVD installation/11.2 - openSUSE Network Status: Unknown network status

View 9 Replies View Related

OpenSUSE Network :: Running ICA Client On Boot?

May 7, 2010

We would like to use Kiwi LTSP to boot some old PCs straight in to a Windows terminal session. We have this working with RDesktop, but we would like to load balance the connections to our Citrix servers, which I don't believe you can do with RDesktop as it points to a single Windows server.

Is there a way to get LTSP to connect to published ICA applications on boot in a similar way to specifying screen07=rdesktop in lts.conf?

View 2 Replies View Related

OpenSUSE Network :: On O.S11.4 NX Client Can't Connect To X Server

May 22, 2011

until 2 weeks ago I had o.S11.3 on both my Siemens and Asus laptops. I have installed NX No Machine. ( I know it's not open source,I am using the free version). With commandline ( root) /usr/NX/bin/nxclient I was able to connect to the other machines. I got Qt: Locales not supported on X server, the NX menu popped up and I was able to connect by inserting resp codes. After fresh install of o.S.11.4 on the ASUS the commandline (root) answers:

xlib: connection to":0.0" refused by server
xlib: No protocol specified
nxclient: cannot connect to X server:0.0

The ASUS can still be reached from the other machines (one with o.S.11.3,the third one with o.S.11.2 ) SSH ( Lan)connections are all working forth and back between the machines, even to and from Win XP, however only from Win 7 on the ASUS, but that's a Win7problem. Comparing the installed xorg-x11- server-extra : on o.S. 11.3 Additional X servers ( Xmdx,Xephir,Xnest,Xvfb ) ,on o.S.11.4 the Xvfb is missing, might that be the reason?

View 1 Replies View Related

Networking :: Install Mrtg On A Client Computer In Network And Measure The Network's Router Traffic

Sep 4, 2009

I wanted to know if i can install mrtg on a client computer in network and measure the network's router traffic.i know that it can be installed on the server.

View 5 Replies View Related

OpenSUSE Network :: Esxi Client Cannot Connect To Server

Jan 28, 2010

So a while back I was able to mount a directory from my OpenSuse server as a NFS on an Esxi server. After restarting the Esxi server, the NFS became inactive and I was unable to remount it. The error given was that the Esxi client was unable to connect to the Suse server. I was looking into the showmount -a command on the Suse server and it showed the mount point on the Esxi server. Could this be causing the Suse server to reject new attempts to mount the directory? What else can I try to fix this problem? Also I should note that both servers can ping each other.

View 2 Replies View Related

OpenSUSE Network :: Server Rejects Client Requests?

Dec 27, 2010

Background:I have a small PC104 running opensuse 11.1. I'm writing a small client/server application for debugging purposes using mono and WCF. All the client does is make a request for information every 100ms.Problem:After about 20 requests the server quits responding to the client. Even if the client is running on the same machine. I've run the exact code on another laptop running opensuse as well as a laptop running windows and everything works great. Hopefully that closes the option that it is a code, mono, or opensuse flaw.Is there a kernel option or a network option that anyone knows about that might cause this sort of behavior?

View 3 Replies View Related

OpenSUSE Network :: Ssh To Server Results In Pausing On Client

Jan 22, 2011

I setup an ssh server that works fine when using the terminal, but trying to run programs like firefox fails. It will open partially and then simply hang. Less complicated programs can open successfully and run fine, but cause my remote computer to pause every 5 seconds for about a second.

View 9 Replies View Related

OpenSUSE Network :: AT&T Global Network Client Not Connecting?

Mar 1, 2010

I recently ran into a problem with my at&t vpn connection. I'm hoping someone in this forums may be able to help? It's been working beautifully then one day it just wouldn't connect. I'm wondering if AT&T may have something to do with this...? I have tried reinstalling agnclient-1.0-2.0.1.3000.i386.rpm and agnSUSE10Prep-1.0-2.i386.rpm but nothing seem to work.I'm running Linux 2.6.31.12-0.1-desktop i686System: openSUSE 11.2 (i586)KDE: 4.3.5 (KDE 4.3.5) "release 0"

View 2 Replies View Related

OpenSUSE Network :: NFS Client Machine Freezes After Server Drops Off?

Jun 16, 2009

I have a 11.1 NFS server and several 11.1 NFS clients. If for some reason the server shuts down before the clients then the clients become almost frozen, particularly KDE is rendered useless even after cycling back to init 3 then init 5. I would like to make the clients immune to shutdowns on the server.

View 3 Replies View Related

OpenSUSE Network :: Dhcp Client Does Not Receive The Dns Server Address

May 18, 2010

I have installed a working DNS server on my home network. I have an unique server, devoted to dns, gateway, storage which runs opensuse 11.0 (I known that it is rather old). Two new clients require DHCP. I have installed, using yast, a very simple DHCP server, according to the following config:

option domain-name "XXX.XXX";
option domain-name-servers 192.168.0.1;
option routers 192.168.0.1;

[code]...

(I have tried to add "ddns-update-style none", and to remove the ntp-servers option, since my server is not a time server, without success). Unfortunately, even if the client (a mac running OSX 10.4) receives a right IP and gateway address, it displays neither dns server address nor default domain name. The same mac, on my office network (not managed by me), receives everything.

View 5 Replies View Related

Fedora Networking :: Connect The Network Where The Openvpn Client Is,throught The Computer With The Client To The Other Network?

May 20, 2009

I have the following problem:I have to networks in remote places.I have an opnvpn client in one network that connects to the the router (openvpn server).My question is,can i connect the network where the openvpn client is,throught the computer with the client to the other network.If yes,how? (please make it an idiot proof anwser because i have limited knowledge about iptables). I was thinking like forwarding (the router in the network with the openvpn client is also firewalling with iptables) the request of the ip class of the openvpn network to the computer with the client,which masquarades the interface

View 2 Replies View Related

OpenSUSE Network :: Setup X11VNC To Start At Boot?

Jun 8, 2011

Is there any guide for openSUSE 11.3 or 11.4 to make x11vnc to start everytime the pc is rebooted, I have search the forum with no results

View 4 Replies View Related

OpenSUSE Network :: OpenVPN Server Setup?

Feb 22, 2010

We have installed "openVPN" from openSUSE 11.2 repo and "openVPN - webmin module" (GUI).What it needs to be done .. "Road Warriors" need to be able to access websites through openSUSE box sitting in the data center, from remote locations (hotel, coffe shops, wi-fi hot spots,..)We're half way there but it gets stucked somewhere with the IP's

View 6 Replies View Related

OpenSUSE Network :: Unable To Setup 10.3 As Samba PDC - The Network Path Was Not Found

Jun 1, 2009

I am trying for the last many days to setup my opensuse 10.3 as Samba PDC Server according to the URL mentioned below, but in vain:How to setup SUSE 10.3 as Samba PDC - openSUSE When ever I try to join a Windows XP machine to the domain setup on Opensuse, I get the error:'The following error occured while attempting to join the domain. The network path was not found'. What could be the reason for this error despite of the fact the I am able to ping the FQDN of the PDC from the XP machine, but the XP machine simply denies to join the domain because of the above mentioned error.

View 7 Replies View Related

OpenSUSE Network :: Setup Xen Virtual Nodes We Encountered One With The Network?

Jan 26, 2010

while trying to set up Xen Virtual Nodes we encountered one issue with the network (which is why it is posted here On the DomU the interface is provided by a bonding -bond0- of three NICS. Now the Xen network script a) does not take this bonding b) destroyes even this bonding From a number of posts I assume I have to configure this by hand, correct? Is there an instruction how to do this? Simply create a bridge on top of bond0??

View 1 Replies View Related

OpenSUSE Network :: X11 Forwarding - Windows Client Works But It's Doesn't - Cannot Connect To X Server

Jan 20, 2010

I have x11 forwarding enabled in /etc/ssh/sshd_config on a suse 11.2 32 bit box running kde I can open x apps on a windows machine using xming and putty just fine, but when I boot the same machine into suse 11.2 64 bit using kde and try using konsole I get: cannot connect to x server

The command I'm using to log in is: ssh -X -l username host I doubt the problem is with the server I'm logging into or it wouldn't work in windows, not really sure what to look for as I've never had a problem using x11 forwarding from a linux client before only windows ones

View 7 Replies View Related

OpenSUSE Network :: Mulit Server Setup \ Server Machine Has No Internet?

Mar 27, 2010

I want to set up the following server in open suse:dhcpopenldapnfs (to allow users to mount their home directories from the serverI started off with the openldap server. I configured it with dc=localdomain,dc=local as its domain. As the server machine has no internet. Though when I go to add a .ldif file with the following command

Code:
ldapadd -x -D 'cn=Administrator,dc=localdomain,dc=local' -f /home/base.ldif -W
It returns this

[code]....

View 9 Replies View Related

OpenSUSE Network :: Setup A Samba Server On 11.2 Machine

Apr 15, 2010

I set up a Samba server on my openSuSE 11.2 machine and I can connect to it locally with the local ip and with my actuall ip. My friend however cannot. I tried to have him ping my ip and that wouldn't even work. I'm confused and wondering why it doesn't work. We share a lot of files and this would make both of our lives much easier.

View 9 Replies View Related

OpenSUSE Network :: Network Manager And Static IP Setup?

Jan 12, 2010

I'd like to have a set up where my Ethernet card has a static IP set up but my WiFi card doesn't.Currently I have a profile for this set up in Network Manager, however on boot up and every time I replug the cable Network Manager chooses the default "auto eth1" profile. I manually have tochoose my own profile for the Ethernet card every time. How can I make it default??I know the workaround would be to use ifup but then I lose the ability to quickly change access points for my WiFi card so that's not a solution for me

View 9 Replies View Related

OpenSUSE Network :: Setup A Network Printer In 11.3 64 Bits?

Dec 16, 2010

I successfully added/shared a network printer in SUSE 11.3 32 bit, but when I try on the 64 Bit box it didn't work out very well.What ports need to be open ? Is it necessary to open port 631 in YAST->Firewall->Advance- >UDP and IPP ?(TCP 631 already open) What services need to be running? Here is the error log :

[16/Dec/2010:19:25:43 -0500] [cups-polld xxx.xxx.xxx.xxx:631] CUPS-Get-Printers failed: Forbidden
XXX is my server IP

View 1 Replies View Related

OpenSUSE Network :: NIS Setup With User Home Directory On One Server

May 4, 2010

I am attempting to setup the following:

1.User login/authentication via a single NIS server.
2. User home directory should also be on the Same NIS server.
3. If possible to setup a single shared home directory for all users.

OpenSuse version 11.2 There are twelve workstations from which users will login using the NIS authentication. I have succeeded in setting up NI server. However login fails as the home directory is not accessible.

View 9 Replies View Related

OpenSUSE Network :: Bootpd+xinetd Setup - Server Is Not Responding To Requests?

Jan 6, 2010

I have installed bootpd-dd2 and enabled and configured it with xinetd. 1. Made sure that their is a bootptab file and it is configured. 2. Tested the bootpd is working by runing the command /usr/sbin/bootptest cmdbfs .3. tail -f the /var/log/messages and saw the requests from the test.4. rebooted a machine that is configured to pxe boot.there is no messages by bootpd when a request is made.request is picked up by network monitor on a seperate computer on the proper udp port

View 9 Replies View Related

OpenSUSE Network :: Unable To Setup Network

Feb 19, 2009

I am unable to do my network setup. I have a lan connection. I used to easily setup it in windows xp in network connections > internet protocol > properties. But I do not understand anything in linux. I have installed latest version of open suse 11.1 and KDE environment. Secondly I am unable to play mp3 files on it and I do not hear any sound at startup too. I *945* motherboard with a inbuilt realtek lancard and it is working fine on windows.

View 3 Replies View Related

OpenSUSE Network :: Setup An Apache Server On Computer Which Will Allow Browsing Of Files In A Specific Directory And Subdirectories?

Jun 13, 2011

I'm trying to setup an Apache server on my computer which will allow browsing of files in a specific directory and subdirectories, without needing any sort of authentication.

I've got the Apache2 server up and running through yast, and everything works fine as long as I try to point it to the /www/htdocs folder. However, I want to point it at another folder, which is on another partition. This partition is formatted as NTFS, if that matters at all (here's some background on some permissions issues I had with the NTFS partitions recently).

When I change the "Directory" setting in the Yast http server configuration utility to the directory on the NTFS partition I wish to use, attempting to access the server results in the following error:

Code: Access Forbidden: You don't have permission to access the requested directory. There is either no index document or the directory is read-protected. If you think this is a server error, please contact the webmaster.

Error 403
192.168.1.100
Mon Jun 13 23:43:29 2011
Apache/2.2.17 (Linux/SUSE)

View 4 Replies View Related

OpenSUSE Network :: NFS Server Returns Error For Client Mount Calls - Error 13

Mar 21, 2011

I'm working with OpenSusse 11.2. I installed and activated the NFS server via yast2. I exported the relevant directory via yast2 (NFS server configurastion)
I'm trying to setup my Linux target to boot via NFS. The kernel boots up but fails to mount the file system. When looking on a capture from ethereal it can be found that the NFS server return error when client try to mount the /nfstest directory from this server. The returned error is 13

serverip: 192.168.56.130
targetip: 192.168.20.180
gateway: 192.168.20.101

[Code].....

View 1 Replies View Related

OpenSUSE Network :: New Dual-boot Machine Has Poor Network Performance

Jul 27, 2011

This is a thread I've moved over from the install forum and is hopefully more focused. Sorry if I have violated some protocol. Problem I have a new machine build configured to dual-boot Windows 7 and OPENSUSE 11.4. Network performance in Windows is very good but network performance in OPENSUSE is very poor.

[Code]...

View 4 Replies View Related

OpenSUSE Network :: Setup A LDAP Server Using The Yast-LDAP Server Configuration Tool

May 31, 2010

we have a weird problem with our opensuse 11.2 server installation.

We want to set up a LDAP Server using the Yast-LDAP Server configuriation tool.

This indeed already worked weeks ago until....this week.
Maybe some updates??!

I do not know what happend exactly. The server just does not want to start again and throws following error:

Starting ldap-serverstartproc: exit status of parent of /usr/lib/openldap/slapd: 1 failed

This happend after a little check of the configuration, but without a change, with Yast. Google delivered only "reinstall your box"-answers.

So.. i did that. And now the "mystical" part: The SAME ERROR occurs with a fresh vanilla system with a brand new and simple configuration (certificats, database, pw...the first Yast config dialog...). I did not change the way i set it up.

I remember, when i did this the first time with 11.2 on that machine, when no problems occured...everything was running out of the box (except the "use commen server certificate" option...).

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved