The most recent upgrade for transmission has broken the package.I think it is a dependancy error between transmission-cli and transmission-gtk requiring a different version of transmission-common than what's available.I have Kubuntu 8.04. Here's my output:
$ apt-get install transmission
Reading package lists... Done
Building dependency tree
[code]....
I was having a problem with a fresh 11.04 install and the VPN software I use for work. I found the fix was to upgrade the software, so I downloaded an RPM, converted it to .deb and installed it via dpkg. The install worked and the VPN software now works, but Package Manager says I have a broken package and wants to 'upgrade' to the older broken one. How can I fix this without breaking my VPN SW again?
View 1 Replies View RelatedMy procedure for updating the installed packages was, to klick on the list of packages that are installed in the installation source @ system in YAST and choose "Update if newer version is available". Up to Suse 11.3 Yast automatically chooses the latest version from each available repository that is installed (eg, Packman or Mozilla Build Service). With 11.4 however, I noticed that it only updates a package, if a newer version is avalible in the repository from which the package originally origines. Since I don't want to look through 4 GB of packages manually, whether there are newer versions in another repository available, I ask you if I there is a posibility to get the old behavior of YAST back.
View 1 Replies View Relatedi'm running debian lenny - latest stable i have recently installed smartcam (mobile phone as webcam over bluetooth) from .deb package , get errors of unmet dependency , but application works like a charm, unfortunately broken dependences block my aptitude , i cant fix them either as latest stable use older versions of dependences even in backports... how do i mark smartcam package as not broken and release my apt?
View 8 Replies View RelatedI have an error when I try to update or remove transmission-daemon package.
Here are some logs:
root@ubuntu:~# apt-get --reinstall install transmission-daemon
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]...
I can only access the Transmission web interface while the Transmission-gtk client is running. When I close it, the web interface is no longer available. I try to manually start the transmission-daemon, but the process never shows up as running.
View 2 Replies View RelatedAfter Upgrade to natty everything went well except my package manager is now broken and I keep going around in circles; Update manager gives me a list of six updates that are downloaded but not installed. When I try to install, It returns;
[Code]...
im trying to fix a broken package. i run sudo dpkg --configure -a Setting up firefox (3.6.9~hg20100817r34537+nobinonly-0ubuntu1~umd2~karmic). i get this message in the terminal but nothing happens. also i cant open synaptic.
View 1 Replies View RelatedThe problem seems to appear with the following packages:openoffice.org-commonopenoffice.org-coreant it said before that the broken package is python-uno.I uninstalled openoffice completely and now when I try to install it again from synaptic, it goes:
Code:
E: /var/cache/apt/archives/openoffice.org-core_1%3a3.2.0-7ubuntu4.1_i386.deb: short read in buffer_copy (backend dpkg-deb during `./usr/lib/openoffice/basis3.2/program/libfrmli.so')
[code]....
I think I've installed mplayer from svn and now I'm getting that annoying "broken package" pop-up. Is any way how to make Ubuntu to ignore this package? I've tried it to solve it by following:
Code:
user@mymachine:~$ sudo apt-get install -f
[sudo] password for jan:
Reading package lists... Done
Building dependency tree
[Code].....
I have installed a package that doesn't work on my system because some dependency is not met and I cannot resolve that without seriously breaking my system. Now I want to uninstall that package but it doesn't work. Synapic package manager is also not able to do anything with this broken package. How can I get rid of it now?
View 9 Replies View RelatedI've have major problems installing cinelerra.
So, I tried to uninstall it.
I messed up at some point. Now, most apt operations result in errors.
At the moment, this is what I get when I try apt-get -f install:
Code:
Is there any way to fix this, or is my package managment permanently broken?
I just want to get to the point where apt isn't returning errors, because at some point I will want to upgrade to 10.04. This is just too risky with broken apt.
I tried to upgrade my pc from 9.10 to 10.04 version with the alternative cd as the update manager was not showing the new release. There were some problem in installation and the process stopped somewhere. Then, when I tried with the update manager I got some error.
View 9 Replies View Relatedso i just installed ubuntu 10.10 from CD. After restart the Update Manager windows poped up and downloaded 21 updates.. but i can't install the updates because "The package system is broken.." [URL]
it's a fresh istall i didn't installed nothing i didn't do nothing
I JUST got back on my laptop now that I have my new A/C adapter, and guess what? The package management system is broken! Which sucks, because I have quite a bit of updates to install.
Here's the details provided by Synaptic when installing the new version of AWN:
Code:
When I run sudp apt-get -u upgrade (or use upgrade manager). I get the following error.The package libhttpcore-java:i386 is not ok and I don't know how to fix it!On another note I am running x64 so the i386 is throwing me off.
View 7 Replies View RelatedI'm sorry if this topic has already come up, but My package manager is broken, and when I press repair, it says it can't repair because the package manager is broken. I'm pretty sure the code is
Code:
sudo apt-get install -f
doing a new install of ubuntu 10.04.2 on a computer
without the boxes to check in the other software tab, i cannot install needed software, my simply shows BLANK no matter what i do:
and yes, i already checked all boxes in the Ubuntu Software thread including restricted.
This is what appears on my screen in synaptic package manager, BLANK?
This SHOULD appear by default, without doing anything, even in a freshly installed system, these boxes should appear by default:
I just installed dockbarx and had an error. It says that the package is broken. When I start Ubuntu Software Center i get a message that i have to repair the package catalog. When i go to the terminal and execute the "apt-get -f install" i get this error:
[Code]...
On my new installation of 10.04 on a Toshiba A30, I'm trying to install EMC2, using an installer file downloaded from linuxcnc.org. At the end of the process, I get the error message below after trying to fix the broken package with package manager.
E:/var/cache/apt/archives/rtai-modules-2.6.32-122-rtai_3.8.1-linuxcnc1_i386.deb: trying to overwrite '/etc/udev/rules.d/99-rtai.rules', which is also in package rtai-modules-2.6.24-16-rtai 0
get past this problem ?
Is it as simple as removing the rtai-modules-2.6.24-16-rtai 0 package ? Do I need this one ? Is it replaced by the newer one, the rtai-modules-2.6.32-122-rtai_3.8.1 ?
Preparing to replace mysql-server-5.1 5.1.41-3ubuntu12.1 (using .../mysql-server-5.1_5.1.41-3ubuntu12.3_amd64.deb).It hangs until i reboot the thing. This is not a normal error.I'm trying to fix it for at least 10 days.No Success.It happens when i try any package operation.
View 2 Replies View Relatedi am Ubuntu rookie i installed the following package onboard (Simple On-screen Keyboard with macros and easy layout creation) when i try to uninstall it using Synaptic Package manger i get the following error.dpkg: parse error, in file '/var/lib/dpkg/status' near line 26430:invalid package name (character `|' not allowed (only letters, digits and characters `-+._'))and when i try to configure it get the same error any help msi@msi-desktop:~$ sudo dpkg --configure -a dpkg: parse error, in file '/var/lib/dpkg/status' near line 26430: invalid package name (character `|' not allowed (only letters, digits and characters `-+._'))using Ubuntu 10.4
View 1 Replies View RelatedI've only been using Linux for a few days (Specifically - I installed Ubuntu 9.10 last week on my laptop for learning the OS and updated to 10.04 over the weekend). I have searched Google (and found answers) for every problem now except for this new one. I apologise in advance for the length but I wanted to include my own troubleshooting as well.
When I installed and setup Ubuntu Karmic - I added my work software. Autopackage wasn't installed by default so I used terminal's package install <filename> command for the first file - and double clicked on the rest to install.With the OS change I wanted to check to see if these packages would have problems installing on 10.04 (mostly to double check).First I checked my Manage 3rd Party Software to remove them - but all my entries here are blank. (I should have quite a few actually - I've done a lot of installing and downloading in the last few days).I double clicked to re-run them but that failed saying there was a problem with the packages. So I swapped to Terminal and found the following:
When I try to install a software package:
sudo package install "SMART Product Drivers 10.package"
Reply: package: can't open config file /home/test/.mailagent
If I type in just
[code].....
What's interesting, is checking my Fedora and Debian builds (I've done a lot of learning for only a few days! But I know a ton about grub 1 and 2 now) - I can't see a /home/test/.mailagent file or folder to copy either. The only thing I can think of is I have never setup an email account on my system (I've only been using it for a few days) and maybe the blank Manage 3rd Party Software tab is indicating a different problem.
When I try to remove a package using software center I get this message : the package system is broken.
View 9 Replies View RelatedA while back a disk error caused /var/lib/dpkg/status to go south - completely corrupted. I managed to rebuild it with the help of a script i found online, but now there's a package called libghc6-edison in limbo on my install. It has no sources, as it was custom built, and i cant seem to find the references to this thing. Apt cache shows that it exists, synaptic gives me an error in CLI every time i launch it referring to this package -Traceback (most recent call last):
I've tried grepping all the files in /var/lib/dpkg to no avail. Any ideas where else this information could be stored? i need to find all the references to the package and purge them. It seems to preven me from successfully pulling off a do-release-upgrade (in a VM for testing) as well as doing a remastersys dist (have to do remastersys backup instead).
The package was never available in Lucid, if i remember correctly, i had to compile it myself and debianize it, but i cant seem to find the sources on my build VM or anywhere in the installed end-product OS.
I just installed brother DCP-350c drivers from here
When I finished I tried to install a scanner driver from brother.
My package manager is broken.
The page mentioned something about that here(just a scroll down)
I tried what they said but the manager is still broken.
It gives me this error report code...
I attempted to install openemr which was taking its sweet time to install it was most of the way through but I had to leave so I left my computer running. Computer when I came back was asleep I started back up and tried installing something from software manager and I got this message from it:
E: I wasn't able to locate file for the openemr package. This might mean you need to manually fix this package.: I tried fixing from synaptic but even synaptic is complaining.
I have been playing around with quickly, and installed the package for my application. The install failed. Worse, none of my package managers can install anything anymore - I get the error
Code:
E: The package swift needs to be reinstalled, but I can't find an archive for it. This seems to be the same problem as here [URL] But I cannot fix it in the same way as there is no online package for me to reinstall. When I try to install the .deb I get a message that it is either corrupted or the permissions are wrong.
I'm using Xandros 4.2 Home Edition Premium in dual boot with WinXP. A faulty installation at Xandros Networks has cause the print service to stop, Adobe Acrobat Reader fails to launch, Open Office is completely gone from the apps menu and there are probably other apps gone haywire.
Xandros tech support rep told me that I should reinstall from scratch. I am wondering since I have Konserve backups of etc, home, and root directories from before these errors occurred, if I can just paste healthy files into the places where they are broken. But I don't know where to begin. I'm not too confident right now about reinstalling xandros from scratch. I WAS confident at Xandros Networks. Now, I have a broken package.
I had to start from scratch a few years ago because of a broken package. I attempted a restore of etc, home and root from Konserve, but the desktop became a mess, so I had to start again completely from scratch. I figure that I don't know exactly what I'm doing, thus I also have Windows which is made for people with slightly lower IQ. I want to be able to use those healthy backups, but I don't know how w/o making a mess.
I'm fairly a newbe. Synaptic tells me I have a broken package: kdebase runtime It tells when repairing:
E: /var/cache/apt/archives/kdebase-runtime_4%3a4.2.2-0ubuntu1.1_amd64.deb: poging tot overschrijven van `/usr/lib/kde4/libexec/kdesu', wat ook in pakket kdesudo zit in english Try to overwrite what also in the package kdesudo I can not repair it. Now I can not update anything.