Hardware :: Slowdown With Nvidia's Legacy Driver 173.14.27. Geforce FX 5900 Ultra
Oct 9, 2010
I'm running a Geforce FX 5900 Ultra with nvidias 173.14.27 driver. I'm running slackware 13.1 with kernel 2.6.35.5.
I get a horrible slowdown which is noticeable in emulators such as bsnes and kega fusion. I also think it's responsible for other issues that involve zsnes flickering like mad and hanging. Zsnes will actually crash if I select any filter plugins with opengl output modes.
Kega Fusion slows down to a crawl (we're talking 10 fps) immediately before loading a rom. Playing a rom makes it even slower.
Bsnes has the same kinda slowdown as kega fusion (even worse since it's so cpu intensive) when I activate scanlines or any type of output filter with opengl. Otherwise with no filters and just plain opengl it seems to run fast like it should...
Gens-GS doesn't seem to enable any filters in fullscreen mode... They work however in windowed mode with no slowdown issues...
I've compiled and installed SDL 1.3 from hg repository, then recompiled bsnes just to test it with newer SDL. Unfortunately the problem persists even with a newer SDL version which thankfully for me means I can revert to the older stock SDL without having to recompile everything else haha!
It's funny because I thought these issues were related to the emulators and not the video card drivers. I had these issues for a couple years running ubuntu and trying other distros. When I installed Slackware 13.1 I decided to try my Radeon 9700 pro and kega fusion no longer had this slowdown issue! I switched back to my Geforce and installed nvidia's drivers and immediately had slowdown issues... I'm gonna switch back to the radeon card and test the other emulators but otherwise it'd be nice to know if there's a solution to this issue...
Ok I installed my radeon card: nvidia-installer --uninstall, then updated xf86-video-ati from 6.13.0 to 6.13.2. Even though kega fusion runs fine I get even worse problems with everything else! LOL so I'm going back to my geforce card.
i tried installing the driver through the one click install (SDB:NVIDIA drivers - openSUSE) and through zipper, but system info says that the display driver is nouveau. here are my specs
install the driver for my GeForce GT 220. I'm using the latest Debian and here's what happens: I get out of X and run ./NVIDIA... .run. It then says that I lack the cc tool for gcc. If I update gcc, it says that the gcc version used to compile the kernel mismatch my gcc version. If I ignore that error, it says that it can't find my kernel source.
I've enjoyed accelerated 3d graphics for years with this laptop, but since moving from CentOS 5.3 to FC12 I have had no 3d or opengl working at all.My install seems good. I'm running right now with the 'nvidia' driver in 1920x1200 res with no real problems except the lack of 3d. I have just finished trawling the forums again, coming back to: F12,F11 & F10 Nvidia driver guides [URL] I uninstalled all my nvidia packages, re-installed only "kmod-nvidia xorg-x11-drv-nvidia-libs.i686" and dependencies, ensured 'nvidia' was my selected driver in xorg.conf (using nvidia-config-display disable, then enable), and rebooted, and still no joy. No errors in Xorg.0.log. My 'glx' extension is loaded. 'nouveau' is rdblacklisted. SELinux is disabled. I have 3Gb RAM and so have chosen not to use the PAE kernel or modules.
Code:
[neek@uberneek ~]$ glxinfo name of display: :0.0 Error: couldn't find RGB GLX visual or fbconfig
I tried to install the driver '01:00.0 VGA compatible controller: nVidia Corporation NV35 [GeForce FX 5900] (rev a1)' watching Fedora Solved → Video Solutions → Installing the Drivers as Provided by nVidia "Installing the Drivers as Provided by nVidia" ,and FedoraForum.org > Fedora Support > But I failed.
Error log*********************************************** ******************** nvidia-installer log file '/var/log/nvidia-installer.log' creation time: Sat Jan 15 12:52:09 2011
[code]....
I typed "su -l" and telinit 3. But "ERROR: You appear to be running an X server" is written. What I can install this driver as well? or how I can booting up the Fedora 14 in text mode?
I have just installed openSUSE 11.1 64 bit on my system. Subsequently registered to get an auto-update repo and auto-updated until no more updates were offered. Then I first tried YaST to install NVidia drivers from the NVidia repo (added their repo), but sax2 wouldn't recognize them. So I downloaded their 190. (beta) drivers, installed the kernel source code and gcc 4.3. Then I switched to a console (Ctrl+Alt+F1), closed the x server, ran the driver install as described (gcc 4.3 is installed). Installer said that all is fine (I checked the log to be sure). So I ran sax2 -r -m 0=nvidia, but the driver still isn't recognized.
anyone knows a driver for nvidia's GeForce GT 440 1GB card.I have installed the nvidia swat-x/ubuntu-x driver, it works somewhat but the performance is really bad.
My 4 yr old Dell XPS 400 has a nVidia GeForce 7300 LE card which won't run Unity as is. How do I determine without actually attempting to install 11.04 if there is an updated driver available that will allow this machine to run Unity?
I recently installed Ubuntu 11.04 on my Emachine Er1402-05, Wireless works fine, but not the grahics Emachine Er1402-05 has a nVidia GeForce 8200 graphics card. The problem is that after installation it only support resolution upto 1024x768, while my LCD has native resolution at 1600x900. I have installed the most recent nvidia driver $sudo apt-get install nvidia-current However, I was not able to config it:
$ sudo nvidia-xconfig sudo: nvidia-xconfig: command not found
I was not able to install the package.
$ sudo apt-get install nvidia-xconfig Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package nvidia-xconfig
In Fedora 13 with the kernel version of 2.6.34.7-56.fc13.x86_64, the NVidia driver of the version 256.53 was installed from rpmfusion repository. Everything works fine except for one problem: the brightness cannot be controlled from the power management programs in either KDE or Gnome. In Gnome, the scroll bar of brightness disappears, and, in KDE, the scroll bar cannot be dragged.
Since the computer with Fedora 13 and NVidia driver installed is Dell Studio One 19 (All-in-One computer) which has no hardware buttons to control screen display options at all, there is no other way to adjust the brightness of computer screen. The BIOS of the computer doesn't include an option to adjust screen brightness either. Since screen brightness is set at the maximum level when the computer is turned on, it is not possible to continue using the computer for a continuous period of time due to eyesight protection. Strangely enough, both the Nouveau driver included in xorg-x11-drv-nouveau 0.0.16-8.20100423git13c1043 from Xorg 7.4 and the driver included in the mesa-dri-drivers-experimental 7.8.1 support brightness adjustment without any glitches.
the installation of the driver of the nvidia geforce GTS 250 fails. is it due to CENTOS or Nvidia driver?
#note1 CentOS version: 5.5 #note 2: in the following "uname -a" output: Linux localhost.localdomain 2.6.18-194.17.1.el5PAE #1 SMP Wed Sep 29 13:31:51 EDT 2010 i686 i686 i386 GNU/Linux #note 3: in the following "/var/log/nvidia-installer.log" content:
tried to install drivers for FX 5500 today, the one that Ubuntu recommended (173) and the current version (260). Both installs failed when it tried to set up python-support. Returned an exit status of "10". I don't know what that means. I could really use some help, because I just installed UT2K4, and without the driver, I can't play it. I'm running the latest release, as noted in the thread title. Dunno if it helps, but it was a clean install, because an alternate iso upgrade failed and mucked up 10.04.
My graphic output is not that nice. How do I find out what kind of driver Centos is using? Can I fine-tune its performance? I tried to install the driver(NVIDIA-Linux-x86-185.18.36-pkg1) from NVIDIA website but it failed. I got the following log file.
--- nvidia-installer log file '/var/log/nvidia-installer.log' creation time: Tue Oct 6 15:33:24 2009 installer version: 1.0.7[code].... ERROR: You appear to be running an X server; please exit X before installing.For further details, please see the section INSTALLING THE NVIDIA DRIVER in the README available on the Linux driver download page at[url]...
I have a Macbook Pro which i want to install Opensuse 11.2 64bit(Upgrades to 11.3) The problem is that once i install opensuse and then boot via rEFIt, it loads up till the desktop is supposed to appear. All i get at this stage is darkness with a few coloured shapes in the background (Video driver not loaded).I can however reboot and go in via the failsafe option. Once in here i can use the GUI. I am a total noob with linux, can some one give me the instructions on how to install this driver. Its driving me insane. When i run uname -r, the results are 2.6.33-6-default I have added the following http repository (download.nvidia.com/opensuse/11.2/)
After a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.
Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h
I have 9.10 running on an old computer with a Nvidia Vanta-graphics card. Unfortunately these appearently aren't supported by 9.10, since the oldest nvidia drivers in the repository for this build are nvidia-gfx-96, while vanta seem to supported up to nvidia-gfx-71. After some hours of following tutorials, fiddling around and testing I managed to install the 71-drivers. But, the nvidia-settings require nvidia-xconfig to be around, which is embedded with later driver-builds but not with 71.
Fortunately I found a tar.gz at this page, so I downloaded it... but -and here is finally my question- where am I supposed to extract it to and are there other things I should do to get it working? Or, if I'm overcomplicating things, feel free to give me directions on what to do. Unfortunately I couldn't find anything on Ubuntu 9.10 and nvidia-gfx-71, hence I'm messing around for hours by now.
I own an ASUS N61JV-X2 notebook PC that has an Intel HD IGP, nVIDIA GeForce GT 325M GPU, and nVIDIA Optimus technology. I am running OpenSUSE 11.4 64 bit with GNOME. I used to be a former Ubuntu user. I used Ubuntu 10.10 Maverick Meerkat 64 bit. In Ubuntu, it was not recommended that I install the proprietary nVIDIA binary drivers because it would cause me to log into a TTY console upon reboot.
nVIDIA states that they have no plans to support Optimus technology in Linux at any time. Would it be recommended that I install the proprietary nVIDIA binary drivers in OpenSUSE 11.4 64 bit with GNOME? Will I get the same problem as in Ubuntu? How do I do this?
Greets all and congrats on the developers on bringing us another great version of Fedora. My box has an Nvidia GForce4 MMX 440 SE 64MB SDRam. I downloaded and updated from F11 to F12 last night. Before I went to bed It booted to a blank screen, GDM didn't want to start. I decided to investigate in the morning and went to bed. The first problem I found was that the F11 Legacy Nvidia Drivers were causing a problem, so I had to remove those. I also did an update with yum to get everything 100% updated. Then rebooted, more problems. GDM did NOT want to start for anything. More investigating found that the culprit was this nouveau kernel mod. Well, I had the xorg nouveau driver installed and I thought that this might be one in the same so I removed the xorg one with no avail, the nouveau kernal mod still loading. Seems that they are different and one is used for the xorg server and the other is used for the framebuffer console. I had to pass nouveau.modset=0 to the kernel at boot time to rid myself of the framebuffer. GDM starts now and I have resinstalled the xorg Nvidia nouveau driver though I have not tested it as of yet. Is there a better way at disabling the framebuffer boot up then by passing things to the kernel?
Edit: I take all that back. Upon further tinkering, reading, and investigation. The problem seems to be two fold: 1) The legacy nvidia drivers pissed and moaned about permission so I removed them. 2). This one I over looked and was causing me most of my grief. I didn't change the xorg.conf video driver from nv to nouveau. I did this and it works fine now. It seems that the "Linva-config-display" And I am sorry that I do not know exactly what this is at the moment. But this would automatically change the video driver from nvidia to nv if I manually changed it in the xorg.conf file after I removed the nvidia drivers. So I ASSUMED(my big mistake) that it would automatically see the nouveau driver and replace the nv with that. I was very wrong. After I added it manually, I rebooted and it runs fine now.
I recently updated my Debian Jessie and somehow that update broke my Debian. I have a Gtx 465 and this has been working fine under Jessie for a year.
After the update I no longer have X running. I tried removing all the Nvida stuff and reinstalling 304-legacy which did not get the Xserver back. I also tried to install Nvidia 304 driver binary but this time it refuses to compile ;( So I am out of luck at the moment.
I am runing Jessie Linux 3.18 Nvidia 465 Gtx Intel Cpu
Code: Select all built-ins [ 41.306] (==) ModulePath set to "/usr/lib/xorg/modules" [ 41.306] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 41.306] (II) Loader magic: 0x7ff757496d80
Does anyone know when or if the nvidia legacy drivers are going into Squeeze? I tried the ones in the Sid repos but ran into unresolvable dependencies. Lots of people were telling me that testing works just fine so I've been trying it out, but to be honest I've run into quite a few problems of this nature. I admit that I'm running a real Rube Goldberg mix of older and newer hardware on this box, but I wouldn't think it would be this much of a problem.
I can't get the Nvidia legacy drivers running. I've the following packages, which are the right ones for my kernel:
Quote:
and I added nouveau to /etc/modprobe.d/blacklist.conf and created a new mkinitrd which boots. But the X11 window system doesn't start up, so I checked if nouveau is loaded and it's really blacklisted. When I manually modprobe nvidia kernel driver I get the following error:
Quote:
FATAL: Error inserting nvidia (/lib/modules/2.6.30.8-64.fc11.i686.PAE/extra/nvidia/nvidia.ko): No such device
and some warnings from the module that 185.18.36 doesn't support my CPU.
My video card is:
Quote:
Try to figure this out for two days now. Rpmfusion is really frustrating for me
Adding vmalloc=256m to the kernel parameters and Option "ConstantFrameRateHint" "True" in xorg.conf also didn't help.
Got a Gforce4 Ti 4400 graphics card. After installing 10.10 everything works but not optimal: I cannot choose any visual effects under appearances. I don't have a NVIDIA menu. Can't use any of the features. When looking in the 'additional drivers' section, nothing shows up. Looking at some threads, I tried what is described in: p {margin-bottom: 0.08in;} [URL]
However, the result is crap. As described further down that thread, my screen goes to crap. So, re-installed everything again and I am now wondering if I should just give up. Not my nature though so here is my question: My card is supported with the Legacy NVIDIA driver: 96.43.xx driver Latest version on their website: Version: 96.43.19 Certified Release Date: 2010.11.16 Operating System: Linux Language: English (U.S.) File Size: 15.7 MB
This file is a .bin file. So what should I do. I read something like if you don't use something from the repository you have to re-install it every time Ubuntu's kernel is updated. However, does the driver in the repository support my legacy card. Is it wise to install the certified driver and how do I do that?
I recently installed the Nvidia proprietary drivers and I have a problem starting gdm. Xserver fails, only throwing a warning concerned to xkbcomp, something about ralt having two symbols... but just a warning anyway. Then, after waiting the screen flash between the tty and a black screen a few times;
i'm on the tty, from where I can "startx" without problem. I tried using the nv driver and gdm worked.. so i think it has relation with the nvidia drivers... If I start gdm from the tty, instead of using the startx command, then gdm appears but if I try to log in.. all freezes up.. Here's my xorg.conf generated by nvidia-xconfig: [URL]
I have an old Radeon 9250, reported as RV280 in hardware info, the current driver is radeon but the performance looks very suspicious to me.
In browsers, for example, simply scrolling down a page shoots CPU to 100%.
It could be the browser issue but at this point I tend to think that I need the proprietary Ati driver, the problem is that my card is "legacy" and simply installing their driver from their repo won't work for 11.3.
So, what are my options here?
Is Radeon driver tweakable in any way?
If fglrx is the better solution - what are the general steps to install an older driver? There's so much to read on it and I can't figure out what is applicable to my case and what isn't.
Maybe I should just revert to 11.2?
I tried checking Opera forums, it doesn't seem like a browser issue and it works just fine on 11.3 with a different graphic card anyway. I wouldn't mention it at all but older versions of Opera, below 10.11, comparing to 10.61 in repos or 10.62 on their site, work extremely fast without any lag, or any latest improvements, for that matter. Chrome appears faster but CPU still shoots up to 100% on page scroll.
Or should I just buy a new card? They are not very expensive but then my motherboard might support only what is now "legacy". It's AGP, not PCI express or whatever it's called now. In that case, should I go for nVidia or Ati? I've got AMD processor, if it matters.
I just installed drivers for this nVidia GPU from the website. Now, whenever I boot, the screen resolution goes to 1024x768 instead of 1280x800 like I want it to. I have to change the screen resolution every time I boot into Ubuntu.
I am trying for Redhat certification on RHEL 5.4. When i tried to install it on my Acer laptop with NVIDIA GEFORCE GO 7600, I was only able to install it in CUI mode and no GUI. From NVIDIA website I tried both the newest and oldest version they have for Linux, which is with .run extension. I tried installing it using sh <drivername.run> and it is starting the wizard, but exiting abruptly, with a kernel error.
How to work around on this issue? Any generic driver that would work for this display adaptor? whether version 5.5 would work with this card?
