Fedora Installation :: Update The New Nvidia Drivers Since Dont Seem To Work In The Newer Kernel?
Jul 7, 2011
I was trying to update the new nvidia drivers since they dont seem to work in the newer kernel, or to try to fix it but now when i run yum update I get a screen like this:
Downloading Packages:
Running rpm_check_debug
ERROR with rpm_check_debug vs depsolve:
kernel-uname-r = 2.6.38.3-18.fc15.i686.PAE is needed by (installed) kmod-nvidia-2.6.38.3-18.fc15.i686.PAE-1:270.41.06-1.fc15.i686
[Code]...
View 4 Replies
ADVERTISEMENT
May 10, 2010
There are currently two options for nVidia drivers in Lucid Lynx, 173, and current. With the video card in my laptop, 9650m GT, the 173 drivers work but Docky is painfully, unusably slow. With the "current" drivers, Docky is fine but I get progressively worse and worse static-type lines across my screen and eventually it the machine restarts itself. I've tried installing drivers manually but they won't compile against the kernel.
Before installing Lucid, I had 9.04 Jaunty installed, and Docky (at the time still merged with gnome-do) worked without a hitch. I ran into this error first when I installed 9.10 and decided to go back to 9.04, hoping that it would be fixed. I can't remember which version of the nVidia drivers I was using in Jaunty, but is there any way to go back to those drivers in Lucid?
View 2 Replies
View Related
Jun 17, 2011
I updated FC14 which included the kernel and also the nvidia drivers kmod. Then after a reboot the video driver wouldn't load. From another terminal I tried different things to fix it and didn't managed. I eventually erased all nvidia drivers so that I can get the default one. Now every time it boots I get a really low light. I can login, but can't see. It seems that the whole screens has about 5% light and I can't see to do anything. I managed now to boot into FC live CD for FC15 and I have light. For FC14 live CD it's the same no light problem.
I tried all older kernels to boot but I have the same problem. I am using PAE kernel and that's why I installed the kmod drivers. But now, since they are not anymore and I can't see anything, even though I am logged in I don't know what to do next. Is there something I can do from FC15 live cd? How can I go using the terminal to my harddisk and how to add the driver or any low graphic driver so that I can have light? After I did yum erase *nvidia* the light went almost off.
View 2 Replies
View Related
Jul 6, 2010
I am running kernel 2.6.32-23-generic-pae and since updating nvidia drivers do not work. I go into hardware drivers and activate but I get dropping to low resolution desktop or VGA not supported.
View 2 Replies
View Related
Sep 1, 2010
Fedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:
Code:
Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored
[code]....
I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?
Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?
View 5 Replies
View Related
Feb 23, 2009
Just installed FC10 and noticed no sound with latest kernel (2.6.27.15-170.2.24), however I do have sound with kernel 2.6.27.5-117. No other differences. Anybody else have this problem?
View 10 Replies
View Related
Aug 14, 2010
I just bought a brand new Lenovo ThinkCentre A70z (All in One). Today I installed Ubuntu 10.4 32bit version, Here are the problems I encountered.1) Ubuntu didn't recognize my Broadcom Wifi Card by default, all though the drivers are there on the DVD, it seems to be blacklisted.my hardware details are :02:00.0 Network controller [0280]: Broadcom Corporation Device [14e4:4357] (rev 01)Subsystem: Broadcom Corporation Device [14e4:04da]I managed to activate the drivers.the drivers I am using are :
a) Package : bcmwl-kernel-source
Installed Version : 5.60.48.36+bdcom-0ubuntu3
b) Package : bcmwl-modaliases
[code]....
View 1 Replies
View Related
Feb 5, 2010
9.04 this morning updated my kernel to I believe it is 2.6.28.18 and upon the reboot I had no desktop. It booted wanting to go into low graphics.
So I drop to shell and stop the gdm and try to run the latest nvidia run file I have and it hangs saying I have a x server running.
Otherwise I am needing assistance with getting my desktop back! I can boot into an older kernel and if need be I would like to roll back that latest update this morning, but once again I am forgetting the command line for that.
View 5 Replies
View Related
Apr 28, 2011
Tonight I upgraded to 11.04. Once I had finished the upgrade, I restarted my computer as it told me too. When I got past the ubuntu 11.04 (purple background orange dots), it simply went to the terminal and asked me to log in. I tried to restart the X server with "sudo service gdm restart" but no display popped up. I happened to have a few NVIDIA drivers in my downloads file also so I gave these a try, but the "install script" failed.
After all this I booted Ubuntu in graphic failsafe mode. I then decided to see what would happen if I removed the proprietary driver. Upon doing this and rebooting my Ubuntu booted into graphical mode "yay!".So without the Nvidia drivers I can finally see something other than terminal, but, I need those NVIDIA drivers for my work. So what can I do? I have tried installing the new NVIDIA linux drivers from the NVIDIA website,and have tried Installing the recommended driver via "additional drivers", but both have resulted in my being stuck in terminal.
View 9 Replies
View Related
Mar 13, 2009
I updated fedora 10 a few days ago, by blindly installing every update available, and when i restarted, my nvidia drivers weren't loading, and I'm having an issue I had before, where the signal being sent to the monitor is out of frequency range. Basically when fedora tries to load its GUI, my monitor just goes blank. Before I could only fix it by plugging in a different (less tempermental) monitor, and messing around with the display driver.
I was wondering if there is a way to mess with the drivers from the command line. I really don't like switching out monitors, and i want to learn the skillz and such.
View 4 Replies
View Related
Nov 2, 2009
I am trying to install the Nvidia Quadro NVS 110 169.04 drivers but am having issues during install. Prior to attempting my install I did install the kernel-devel rpm so it can compile. after running the RPM I get. Quote: No precompiled kernel interface was found to match your kernel; would you like the installer to attempt to download a kernel interface for your kernel from the NVIDIA ftp site [URL]?
which of course does not work. next it says Quote: "No precompiled kernel interface was found to match your kernel; this means that the installer will need to compile a new kernel interface.. i hit okay and move on to. Quote: Error: Unable to find the kernel sources tree for the currently running kernel. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat linux systems, for example be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. if you know the correct kernel source files are installed, you may specify the kernel source path with the "--kernel-source-path' command line option
View 5 Replies
View Related
Jan 14, 2010
im having an intel E2180 processor with 2 gb RAM and an nvidia 8400gs graphics card. Lately i installed Fedora 12 on my system and found that with default settings the desktop 3d is not working. so installed the kmod-nvidia using yum after following the instruction.i also edited the grub.conf file to rdblacklist=nouveau to blacklist nouveau drivers.
Then once i rebooted i found two kernels in grub ie the old one and the one with PAE extension. when i booted into the old kernel its Xwindows failed to load showing a black screen and when i tried the new PAE kernel it booted in 640 x 480 resolution. {earlier i was getting a resolution of 1440 x 900 on my 17" widescreen monitor}. it also showed that the nvidia drivers failed to load. I also read in some forums that the PAE kernels are for systems with 4gb+ of ram. So i thought it better to reinstall the whole thing.
then i reinstalled the whole operating system using my fedora 12 dvd and performed the 'upgrade or replace the existing linux distribution'. interestingly now my older kernel has disappeared and the PAE kernel is the one that is remaining.
[Code]...
View 1 Replies
View Related
Jun 9, 2011
After using Arch Linux for a while, I tried Ubuntu 11.04 again. Most of it was a pleasant surprise, except for the nvidia drivers. I currently have the nouveau drivers, but when I activate the nvidia drivers and reboot, it's installed but not in use. I figured I should run nvidia-xconfig (as suggested by nvidia-settings) but that makes my computer boot into a tty. Removing the /etc/X11/xorg.conf file makes it boot in nouveau again.
How do I install the Nvidia drivers? Ive tried the drivers from nvidia.com too, with the same results. I really want to be able to play my games, and nouveau just isnt going to cut it.
View 9 Replies
View Related
Dec 3, 2010
The updated Kernel 2.6.32.26.175.fc12 (i686) broke nVidia 96xx drivers (nVidia MX-4000 card).Resulted in a quickly flashing cursor in the upper left corner, with no X startup.I removed the driver and let it rebuild using akmod. Still have the same problem.When I revert back to the previous kernel 2.6.32.23-170.fc12.i686, all is well.At this point, wonder what the chances are of this being fixed? Seems the last set of updates before EOL of a release always breaks something critical.
View 6 Replies
View Related
Jun 17, 2011
Today I finally could install Fedora 15 i686 in my now aging (2005) desktop computer (although I will always think of it as my "new machine", as long as I don't assemble a new one for me):
AMD Sempron 3100+ (1.8GHz)
1GB DDR400
120GB HDD
NVIDIA GeForce FX5200 (128MB)
After I installed F15 my initialpression was that it worked really good on that hardware: everything went fine with GNOME 3 for example,except for some lags in graphics rendering, which I thought would be solved after the graphics card's full power were unleashed with the proprietary NVIDIA driver.For starters I am not sure which Nvidia driver is right for my card (Nvidia 173.X or the regularvidia).I managed to get "working" the 173.X driver but the desktop is even less responsive to begin with, and there appears to be a lot of activity on the hard disk side.So, my question is, which could be causing the performance loss?
A. The "small" RAM.
B. The vintage graphics card.
C. Some problem in the hard drive.
D. A known bug.
View 3 Replies
View Related
Jun 6, 2011
after updating kernel and installing nvidia drivers, the startup splash(I dont know the proper word) has changed into bar type. How can it be corrected .
View 3 Replies
View Related
Dec 26, 2009
i ran yum update which updated kernel to 2.6.31.9.174.fc12.i686.PAE. Now after logging in i get a blank white screen. With previous kernel updates i have had no such problem. Anyway, the boot messages are following:
Quote:
checking for module nvidia.ko [FAILED]
nvidia.ko for kernel 2.6.31.9-174.fc12.i686.PAE was not found [WARNING]
The nvidia driver will not be enabled until one is found [WARNING]
Driver already disabled
I have a GF 6600 video card.
View 14 Replies
View Related
Jul 12, 2011
I have just updated my kernel to version 2.6.38.8-35 in Fedora 15, it now refuses to boot that kernel. I just get a lot of text on the screen and nothing happens. I can ctrl-alt-fn to get to a prompt, but I do not know how to fix the nvidia problem.
When I edit Xorg.conf and replace 'nvidia' with 'nv' the new kernel boots but only to fallback mode, trying to then re-install the nvidia drivers shows them to be already installed and I can get no further.
View 13 Replies
View Related
Jul 27, 2009
i m trying to fix the nvidia drivers and stuff to let Desktop Effects work. I reboot after some changes, and at first I got a kernal error message, and the Fedora froze. So I restart,, and it freezes before I even get the error message. Pop in the live cd, booted up from it so I can talk to my fedora friend, and the reboot to try again. Works, still hasn't froze, and I could get the actual error info.
View 4 Replies
View Related
Oct 29, 2010
I'm running Fedora 13 x64 and updated the kernel to the latest version (2.6.34.7-56 to 2.6.34.7-61). I use the proprietary nvidia drivers (currently 260.19.12) so I had to compile the kernel module against the new kernel sources and reinstall the driver. The process was apparently successful, but when I try to start X nothing happens, it's as if the computer had been suspended, my monitor acts like it isn't receiving any input. I have full runlevel 3 access, and the system seems pretty much fine up to that point. Nvidia's own sanity tests which are built into the installer reported no problems with my driver.
View 14 Replies
View Related
Aug 14, 2011
Whenever I update my kernel, I have to re-install the NVIDIA drivers, and this has always worked for me so far. I have the latest version of the Developer Drivers for Linux (270.41.19). After updating to the 2.6.40-4.fc15.x86_64 kernel, the nvidia installer fails with the error (/var/log/nvidia-installer.log):
Quote:
If you are using a Linux 2.6 kernel, please make sure you have configured kernel sources matching your kernel installed on your system. If you specified a separate output directory using either the "KBUILD_OUTPUT" or the "O" KBUILD parameter, make sure to specify this directory with the SYSOUT environment variable or with the equivalent nvidia-installer command line option.
Depending on where and how the kernel sources (or the kernel headers) were installed, you may need to specify their location with the SYSSRC environment variable or the equivalent nvidia-installer command line option.
ERROR:
The kernel sources are installed. Installation works properly in 2.6.38.8-32.fc15.x86_64
View 9 Replies
View Related
May 11, 2011
I read somewhere that if you run nVIDIA, that a PAE kernel won't work with it. Not supported, IIRC... Any truth to this? - My linux is (so it seems anyway) OK & I'd rather not mess it up. But I WOULD like to "use" all 4G of memory I have.
View 11 Replies
View Related
Jun 16, 2010
that my video and wifi driver dont work after my last update..Update:Quote:
#
Jun 16 00:29:25 Updated: libudev-151-10.fc13.x86_64
Jun 16 00:29:27 Updated: libgudev1-151-10.fc13.x86_64
[code]...
View 14 Replies
View Related
Oct 18, 2009
I seem unable to get an nvidia driver working properly after upgrading to the latest kernel with Fedora 11.Here is my laptop and its specs: http://h10025.www1.hp.com/ewfrf/wc/d...reg_R1002_USEN[URL]I've tried both the kmod and akmod unsuccessfully. Everytime it gives me a black screen on boot, I can fix the problem by popping in the LiveCD, and changing the xorg.conf file back to the backup.Here are the errors/warnings from my boot.log file:
Code:
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
Checking for module nvidia.ko: [60G[[0;31mFAILED[0;39m]
[code].....
View 6 Replies
View Related
Jul 28, 2009
So I have been trying to install these drivers forever and after going through a million forum posts and Google searches I have been unsuccessful. The process I have been trying starts as such: I hit ctrl-alt-f1 and then login as root. i then change to run level 3 by doing /sbin/init 3. After that's done I cd to desktop and do sh NVIDIA-LINUX-x86-185.18.29-pkg1.run --kernel-source-path /usr/src/kernel/2.6.18-128.2.1.el15-i686
If I don't give it the source path it can't find the source tree. Eventually I get the error: ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from
[Code]...
View 5 Replies
View Related
Jul 22, 2011
It seems that i am stuck using the 2.6.38-9 kernel, since no matter what i try, i can't update. I have had this problem since 2.6.38-10, but figured that the problem probably would solve itself after the next kernel update, sadly that was not the case.
I have had some worrying error-massages from dpkg about broken packages, which i believe might be the source of this problem, as it reported that the package "linux-image-generic" was broken. I removed the postinstall script from /var/lib/dpkg/info and updated both dpkg and aptitude.
I am not getting any more error messages, and if i look in the synaptic package manager, i can see that kernel 2.6.38-11 is indeed installed, yet i can't select it at bootup, even though i have tried to manually update grub.
View 7 Replies
View Related
Sep 22, 2010
I use a BLAG (F12) with a free-kernel 2.6.32.21-libre.168.fc12.x86. I'd like to install a newer kernel (.35). But don't know what is the better way to do this. Is it to download the .35 src.rpm and rebuild the RPM under F12 ? Or should I compile it since the source ?
View 2 Replies
View Related
Mar 2, 2010
I know that current just pushed kernel 2.6.33 down, but has anyone been successful in building the nvidia drivers against this new kernel? I'm not having any success with the 190 driver and the 195 beta driver. There are some patches that I found on the nvidia forum, but so far, nothing is working.
View 14 Replies
View Related
Feb 19, 2009
This is my first post, as I've finally become fed up with trying to get the nvidia drivers installed on Fedora 10. I've read through all the posts here about how people have had problems. I know about the rpmfusion repository, and have followed leigh123's instructions to the letter at this link:[URL]The exact stepsI have taken before following his sage advice follows this way: install off the CD image I burned of Fedora 10, run from the menus "System-->Administration-->Update System" to get the system up to date, reboot to make sure everything is working fine.
Then I follow the above instructions (only because they have gotten me the closest to getting the drivers working). After the reboot from following those instructions, the system starts up, and I have a desktop. But when I restart again, either because I'm shutting down for the night, or just to check again that everything is fine,I get nothing but a flashing cursor in the upper left of my screen. I'm able to CTRL+ALT+F2 and get to a login that way, but can't get into the GUI. I've searched the forums (both here and on The Web generally), and can't find a fix for this that works for me. I have gone back and erased the partition and reinstalled, so I'm at the basic install with all the updates for my system, and needing help with getting the drivers installed and working.
Just to give a run down of what I have on my system:Two NVidia 8500 GT cards connected with the SLI bridgeAMD Athlon 64 X2 Dual Core 3800+Runningl 2.6.27.12-170.2.5.fc10.x86_64 (I'm typing this up as I reinstall updates as I listed above).Before anyone starts giving suggestions, please make sure to give the full instructions, as I'm new to Fedora/Linux. And if there is anything else you wish to know about my configuration
View 9 Replies
View Related
Oct 3, 2009
I can't get the Nvidia legacy drivers running. I've the following packages, which are the right ones for my kernel:
Quote:
and I added nouveau to /etc/modprobe.d/blacklist.conf and created a new mkinitrd which boots. But the X11 window system doesn't start up, so I checked if nouveau is loaded and it's really blacklisted. When I manually modprobe nvidia kernel driver I get the following error:
Quote:
FATAL: Error inserting nvidia (/lib/modules/2.6.30.8-64.fc11.i686.PAE/extra/nvidia/nvidia.ko): No such device
and some warnings from the module that 185.18.36 doesn't support my CPU.
My video card is:
Quote:
Try to figure this out for two days now. Rpmfusion is really frustrating for me
Adding vmalloc=256m to the kernel parameters and Option "ConstantFrameRateHint" "True" in xorg.conf also didn't help.
View 6 Replies
View Related
