I had a sweet one in windows that came with my WN111v2 that did what i needed. Now that WINDOWS and my WN111v2 dont work i need two things.
1 a good USB adapter that will work with 2. a good wireless utility that is easy to install. I work out of my van and often have time to get online but not if its a pain in the A$$. wardriving, leeching, parasite, whatev you wanna call it. I call it passing my free time at work.
I try to configure VPN but it dont want to work.
This is scheme:
Code:
10.10.1.90 <--> externalIP1 <--> MY external IP
My /etc/ipsec.conf where I type setkey -f
Code:
cat /etc/ipsec.conf
flush;
spdflush;
[Code]...
I just bought a brand new Lenovo ThinkCentre A70z (All in One). Today I installed Ubuntu 10.4 32bit version, Here are the problems I encountered.1) Ubuntu didn't recognize my Broadcom Wifi Card by default, all though the drivers are there on the DVD, it seems to be blacklisted.my hardware details are :02:00.0 Network controller [0280]: Broadcom Corporation Device [14e4:4357] (rev 01)Subsystem: Broadcom Corporation Device [14e4:04da]I managed to activate the drivers.the drivers I am using are :
a) Package : bcmwl-kernel-source
Installed Version : 5.60.48.36+bdcom-0ubuntu3
b) Package : bcmwl-modaliases
[code]....
I am having some difficulties installing a wireless usb adapter on Fedora 12. the usb adapter is: Netgear WN111v2 Wireless-N USB adapter and it has the chipset: Atheros AR9100AP. I did a intensive search on the web but i don't know how to go further. These are the steps i've tried. I installed NdisWrapper and tried the following:
[code]...
But i really have no clue what to do further. I also found this site, which seems to have all the answers: [URL]... But i have no idea how it works. I copied all the firmware files to right directory. But what is the next step?
i have a big problem to get my linkysy WUSB600N Wireless N Adapter to work . I have try it with the packages but don't work .
View 1 Replies View RelatedTrue terminal is: ctrl + alt + F1-F6, F7 to exit if you don't know what i mean by using true terminal term. My keyboard work everywhere else.
View 3 Replies View RelatedMy samsung ipod yp-T10 works fine on windows but it does not on ubuntu.I have not installed any software to run it on ubuntu except there is Rythmbox and it does nothing when i scan the removable media.Whenever i try to open the music folder of my ipod it gives this error:The folder contents could not be displayed.orry, could not display all the contents of "Music": Failed to get file list: -8: Fixed limit exceeded.
View 9 Replies View RelatedWell, this is a problem that keeps on coming, and I never found a solution: Maybe it is just me misunderstanding how it should work, but:
1) do you confirm that, as a member of the group "fuse", I should be able to read the file?
2) of course, I could change the permission of the file, or read it as sudo, but sometimes this is not possible. how to achieve it then?
I've got ubuntu 9.10 in my machine and install avast on it, althought the av dont recognize the windows and the commom partitions. I know that windows is dev/sda1 and the commom is dev/sda5 and in avast, only appears the folder dev, dont appear the subfolders.
View 5 Replies View RelatedI updated Lucid yesterday, and when I restarted the user interface was changed to a more simple feeling display. This makes me think I'm stuck in a "basic" mode or something. I attached a screen shot, but to give you an idea ill describe some issues. For one thing the minimize buttons are now on the right. The volume control, which used to appear on the top right of the screen, is gone and my multimedia volume control buttons on my Inspiron 1420 no longer work. Furthermore, the command terminal is now white and the keyboard shortcuts for copy and past don't work.
Immediately after updating I also got an error message at login (which also appears different and gives options on bottom of screen like gnome Failsafe) which said something like "gnome default power management installed incorrectly...". I followed the advice of a forum thread that involved the purge command and that seemed to remedy that message.
I was trying to update the new nvidia drivers since they dont seem to work in the newer kernel, or to try to fix it but now when i run yum update I get a screen like this:
Downloading Packages:
Running rpm_check_debug
ERROR with rpm_check_debug vs depsolve:
kernel-uname-r = 2.6.38.3-18.fc15.i686.PAE is needed by (installed) kmod-nvidia-2.6.38.3-18.fc15.i686.PAE-1:270.41.06-1.fc15.i686
[Code]...
When i got to a site such as You Tube of South Park Studios the vidio playes fine but the pause, play , fullscreen ect... Buttons dont work unless it click on them multiple times!
View 3 Replies View RelatedI recently installed Ubuntu 10.04 in a HP Compact nc 9010 andan't see any wirelessnetworks
View 9 Replies View Relatedjust installed ubuntu in 1 of my boxes is an old compaq presario v2000. Is running dual boot with XP, the problem is i dont have internet connection(wireless and wired) with Ubuntu but i do with XP. I read like hundreds of posts from diferent forums and i wrote all crazy commands in terminal but aint working. I tried directly trough the modem (motorolla 2210)and with the router(netgear wgr614) via wired and wireless and aint working either. For some reason ubuntu doesnt request an ip adress from the router or the router dont asign an ip adress to my linux box.
View 7 Replies View RelatedI tried Fedora 11 Live CD and if finds and I am able to connect to my wireless network imediately. But now when I have installed Fedora to the hard drive, I can see the wireless network, but when I press connect, it starts connecting, both dots become green but then it just says "Disconnected, the wireless network has been disconnected"
View 1 Replies View RelatedI am using BSNL WLL (Wireless Local Loop) on my Fedora system to connect to the internet My modem is Huawei ETS-1201, I use wvdial The problem is that, on every linux distribution I tried, Webpages dont load or load incompletely randomly This happens most during peak net traffic. I tried to edit the /etc/ppp/options file to set my MTU and MRU to 576
But, It does not seem to be working. There is no such problem on Windows and I can connect flawlessly I takes several retries to connect to a site. I sometimes become frustrated with this and switch to Windows But as you all know, Windows is not the right OS for people who want more from their computers.
Below my specs:
Intel Core 2 Duo E8400
Intel BOXDG43NB
1GB DDR2 800MHz RAM
WD 320GB 7200rpm HDD
In my company, they provide linux machines which has a 4 yr old Gentoo linux. Also the OS is loaded through Yukon PXE/netboot environment, and the users directory is mounted from an network location. Also they dont provide root access in these machines.
I would love to use the latest Ubuntu in this machine. Please let me know if it is possible to configure a ubuntu/xubuntu in this machine. I need to be able to login with my corporate user_id/passwd, because many of the tools use this for authentication. so just doing a ubuntu installation in this machine and mounting the n/w location would not help.
I have recently set up a CENTOS server using the kernel 2.6.18-164.el5xen (x64 5.4 Install I believe). Originally I set it up with Xen to becasue I was goig to create the odd VM on it, however I no longer need to do this.Further, I believe I am having networking issues due to the installation of Xen. The machine cannot seem to locate any network addresses (eg websites) unless I put in a hosts entry for them. I believe this networking issue would be easier to rectify if the virtual networking interfaces for Xen were not installed but to do this requires a Kernel replacement. Im not experienced with doing this and the machine is located remotely to me and I dont have the original install CD available.How would I go about replacing the kernel to the non Xen version if I dont have the install CDs?
View 1 Replies View RelatedI've been experiencing a problem with Fedora in which when I enable Wireless in Fedora, Wireless networking does not work in windows. HOwever, when disabled, it works correctly. Windows claims it is "not able to find any networks to connect to"
EDIT: It seems that when wireless is disabled manually on fedora before shutdown, there are no problems in windows.
Ubuntu 10.04 was in small slave-disk, and I put other bigger disk same type IDE/ATA.In first start I get message: "no such device....., grub rescue."Anyway, I make installation in this disk and and now after start message is: "error: out of disk, grub rescue.So now I can not use master/XP and no slave/Ubuntu.
View 3 Replies View RelatedI made a Ubuntu server and it is pretty cool. I had a windows computer that I could copy and paste files to and from over the network. What you did is just find it in My Network and the files were available there. How do I make Ubuntu or Samba act like that?
View 2 Replies View RelatedI have recently installed Ubuntu 10.04 in one of my notebook's HD partitions. It all runs smoothly, except for wireless. For some reason, Ubuntu only finds my wireless connections after I boot into Windows and then restart. If I boot straight into Ubuntu, I always get the 'device not ready' or 'disconnected' message under 'Wireless networks'.
Does anyone know what might be the cause of the problem and what can I do to solve it?
Below are some information about my computer, as requested in the 'How to post a wireless issue' thread.
These are the results AFTER restarting from Windows.
Machine brand: Mirax - XT8000 NTL 243200
Code:
lspci
02:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
[Code].....
My computer running Ubuntu 10.10 cannot see the Samba shares on either of my two Windows XP machines. I have Samba installed and configured, I am on the correct workgroup. However, under "Network", there is only one item - Windows Network, which contains no workgroups. I am hosting a share on this Ubuntu PC, but I haven't had the time lately to see if I can view it from the Windows XP computers. If I click Connect to Server, and enter the IP Address of one of my XP computers, I can connect to them. However, if I enter the computer's name I get "Failed to retrieve share list from server" without a specific share, and with it I get "Failed to mount Windows share."
View 2 Replies View RelatedI have a TP-Link WN851n ver2 with the ar922x chip. This just seems to drop out. it sometimes connects but not reliable. It is just plain annoying. I have to run windows to get any wifi to work properly.
View 1 Replies View RelatedI installed UBUNTU 10.10 alongside windows 7. Now the problem is: If i boot into UBUNTU first, ethernet does not work. But it works if i boot windows first and restart back into UBUNTU. Which means i have to boot windows first to make ethernet work on UBUNTU every time i start my PC.
View 9 Replies View Relatedhow to go about getting Ubuntu to receive an ad-hoc wireless ICS enabled connection. The internet connection is shared through a virtual machine running XP (with the USB wireless dongle under XP's control), on my desktop PC, in order to escape my ISP's no NAT policy. Ubuntu is on both the desktop PC (the sender), and the laptop (the receiver). The desktop and laptop also run windows 7. I managed to get my laptop Ubuntu to connect to my virtual machine XP, by setting the IP, subnet and gateway of all wireless devices, as was suggested in [URL] - I did use the Network Manager GUI, but pinging the desktop doesn't work.
Even with the IP configuration, Windows 7 on the laptop receives the internet fine. The next step is getting Ubuntu to receive. I can do any kind of configuration in a virtual machine, such as install Ubuntu. In virtual machine XP I used 192.168.0.1 with subnet 255.255.255.0 and gateway 1.1.1.1. On the laptop Ubuntu 192.168.0.2 same everything else. I understand nothing about networks. I know there is stuff I can do in the console, but how will Network Manager cope with me doing that?
How to connect my newly installed ubuntu on my desktop at work to the company's server that is windows based. I have my user name and password given to me by my it office but they could not help me set up linux.
View 8 Replies View RelatedFirst off I would like to install a GUI for samba. After that I want to set up my network so that router stays as the server for the network I have four windows computers already hanging off of the router. This machine which has Slackware on it is hardwired, directly connected, to the router via cat-5 cables. I have samba installed already and I just need to configure it correctly.
View 4 Replies View RelatedI can get the command program to work, but not the desktop program to work. Windows Wireless Driver was working, but now every time I try to start it, it won't load, and will just be an empty window. This happened after I tried to installed a driver (which was the wrong one), and I restarted the computer. After this happened, I tried to reinstall the program, but to no avail.
The command program works, but I can't use the command lsusb, because it just pauses and doesn't do anything. Do I have to wait for it to kick in. I'm pretty sure that this is not it, because when I try the lspci, this works fine (but it's not the one I need). Please help, and don't make any stupid replies.
I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...
