Fedora :: Compiling - Getting Linksys WUSB600N Working On FC13
Aug 8, 2010
FC13 i686. Trying to compile a driver for Linksys WUSB600N Ver. 2 from a Ralink driver.tar.gz. Below is a portion of the output of the compile, I can't put this whole output on this LinuxQuestions Website it is to large.
In file included from /lib/modules/2.6.33.6-147.2.4.fc13.i686/build/include/linux/usb.h:21, from /home/jim/Downloads/RT3572/2010_0709_RT3572_Linux_STA_v2.4.0.1/include/os/rt_linux.h:62, from /home/jim/Downloads/RT3572/2010_0709_RT3572_Linux_STA_v2.4.0.1/include/rtmp_os.h:42, from /home/jim/Downloads/RT3572/2010_0709_RT3572_Linux_STA_v2.4.0.1/include/rt_config.h:72, from /home/jim/Downloads/RT3572/2010_0709_RT3572_Linux_STA_v2.4.0.1/common/crypt_md5.c:28:
/lib/modules/2.6.33.6-147.2.4.fc13.i686/build/include/linux/sched.h: In function "get_mm_hiwater_rss": .....
I started a fedora 15 live cd last night, and at the top right corner, i noticed that wireless was not active. Right mouse button on the internet icon showed me that fedoar recognized the usb device as it is,, a Linksys WUSB600N wireless lan.
However, fedora warned me that the firmware was not available, therefore i was not able to configure the WUSB600N. To be specific,, it's the V2 version.
My question is,, does this device work with linux fedora? i assume that i need to install the required firmware in order to use the device.
I think lightning may have killed it. It was working fine. Now I cant get it recognized no matter what I do. It also quit working in Win XP where I never had a problem with it because it had its own connection software.
dmesg yields this- RTUSB disconnect successfully [ 312.876034] usb 2-1: new full speed USB device using uhci_hcd and address 7 [ 312.996021] usb 2-1: device descriptor read/64, error -71 [ 313.220031] usb 2-1: device descriptor read/64, error -71 [ 313.436038] usb 2-1: new full speed USB device using uhci_hcd and address 8 [ 313.556025] usb 2-1: device descriptor read/64, error -71 [ 313.780031] usb 2-1: device descriptor read/64, error -71 [ 313.996032] usb 2-1: new full speed USB device using uhci_hcd and address 9 [ 314.404022] usb 2-1: device not accepting address 9, error -71 [ 314.516021] usb 2-1: new full speed USB device using uhci_hcd and address 10 [ 314.924029] usb 2-1: device not accepting address 10, error -71 [ 314.924046] hub 2-0:1.0: unable to enumerate USB device on port 1 [ 343.664017] pan0: no IPv6 routers present [ 809.024049] usb 1-1: new high speed USB device using ehci_hcd and address 10 [ 809.182271] usb 1-1: configuration #1 chosen from 1 choice [ 809.182837] [ 809.182839] [ 809.182840] === pAd = ffffc20020b41000, size = 598568 === [ 809.182841] [ 809.182845] <-- RTMPAllocAdapterBlock, Status=0 guest3@guest3-desktop:~$
i'm very new at this and tried to install Linksys WUSB600N v2what i would like to know how uninstall any drivers/ software i may have already put on the os. how can i verifry that the device is functional after installing drivers.
i cant connect to my wireless network... im using karmic. Ive searched and found quite a lot of threads but arent sure where to start. I have a Linksys wusb600n, and are trying to connect to my network. It detects the network fine but doesnt connect.
My OS is Linux Xubuntu 11.04 (32 bits) and I'm trying to get Linksys Wusb600n network adapter to work. I followed this post and did all that was written in it... almost. When i came to blacklisting, I blacklisted all drivers that starts with rtx (where x is any digit). Here are lines that I pasted in blacklist.conf:
The problem: I do see all available networks. So I guess... it somehow works. Anyway, problem is that it does not connect successfully to my network. I click on it - it asks my password. I enter it and click 'Connect'. Nothing, except that network icon is started to like spin around (trying to connect, I guess), happens. After few minutes, it asks for password.... again. I enter it and all starts from the beginning. Its like a loop! Note: I don't have any other things installed except linux-firmware-nonfree_1.9_all.deb and, don't know how successfully, but RT3572USB 2.5.0.0.
After much tiddling'n'fiddling I finally got my new Linksys WUSB600N v2 working. Contrary to many posts, mine did NOT work with either the standard rt2870sta module, nor the updated version from the driver:wireless repo. Also the rt2870 version from the ralink website didn' t work. After a days worth of Googling I came across this post. The bottom line?
1. Download rt3572 from the Ralink website. 2. Add {USB_DEVICE(0x1737,0x0079)}, /* WUSB600N v2 */ to common/rtusb_dev_id.c 3. Follow README_STA
I did not install firmware packages. And be sure the rt2800sta module doesn' t get loaded. (you could just remove it, I suppose.)
Im having another problem with my wireless in Maverick, Im at my wits end with this thing and dont know what to do next. I followed Dev0's from this thread.And now when ever I start my computer I get a notification that says "Linksys C" connected. Then only a few seconds later it says Disconnected and then from then on every few minutes the Password prompt pops up and then I enter my password and then it just keeps going in that cycle until I click cancel.
I have a laptop running 11.2 with an internal Broadcom-based Wi-Fi card that's working fine. I'm trying to get 802.11n going with the WUSB600N. The USB ID on this device is 1737:0079. I believe this means it's a "V2" with an RT3572 chip.
No driver loads for this device when it's plugged in. If I do a "modprobe rt2870sta", a driver loads, and syslog shows "rtusb init" and "usbcore: registered new interface driver rt2870". But ifconfig -a doesn't show a new network interface. I've also tried building the RT3572 driver from the manufacturer's web site. It builds fine, and modprobe will load it, but I get the same results as the rt2870sta driver.
I'm new to openSUSE and as a matter of fact, to linux too. I've got a Linksys WUSB600N wireless adapter which used to work fine with some live versions of linux that I was testing out before moving onto suse... Each time, upon booting using live CDs, I used to copy the driver I had downloaded from:
Then 'make' and get into the driver's os/linux directory to load the driver using 'insmod rt2870sta.ko' Now, upon doing a 'make' and 'make install', followed by the 'insmod rt2870sta.ko', I get the error saying:
insmod: error inserting 'rt2870sta.ko': -1 Invalid module format
I tried doing 'modprobe -rv rt2870sta' and didn't get any error messages. But while doing 'modprobe -v', this error shows up: insmod /lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko FATAL: Error inserting rt2870sta (/lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko): Invalid module format
I see a bunch of posts about WUSB600N, often telling folks to download and compile proprietary drivers from ralink's website. With Ubuntu 11.04, getting WUSB600N to work might be as simple as disabling rt2870sta (for rev1). If you have rev 2 card, driver to disable is I believe rt3572sta. Even if you need to recompile drivers by hand, the right thing to do is to first try nightly build of rt2x00 drivers from [URL], and fall back to ralink provided drivers only if things do not work out with rt2x00 drivers. I saw recent updates on rt2x00 mailing list for rt3572 chip, give it a try if you have rev 2 card.
WUSB600N rev 1 (rt2870 chip) should "just work" with rt2x00 driver included with 2.6.38 kernel in Ubuntu 11.04. At least it works for me. You may need to blacklist rt2870sta driver from staging directory so that it does not load and interfere with rt2x00 drivers. There's one small annoying issue with power save mode on rt2870 chip when rt2x00 is in use, which seems to have just been fixed upstream. Most users will never notice it, but if you do notice card re-connecting to AP every 10-20 minutes or so, simply disable power saving, and all will be smooth (iwconfig wlan0 power off). If you have an older Ubuntu release (kernel 2.6.35) and rev 1 card, you should be able to download nightly build of rt2x00 driver from [URL]. It worked for me just fine with previous Ubuntu releases.
I'm trying to install a Linksys WUSB600n dual-band USB wireless-N adapter onto a desktop system with opensuse 11.1 installed; this system will be migrating to a back porch with no cabling access, hence the wireless solution. Everything works fine under Windows XP, but on Linux, not so much. Hardware info is as follows; there is no "Wireless LAN" entry, but there is a USB entry:
FC13 sensors not workingsensors-detect gives:Some south bridges, CPUs or memory controllers contain embedded sensors.Do you want to scan for them? This is totally safe. (YES/no):
Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No
Code: $ su -c 'yum install wine' this forum won't let me put all the text in Transaction Check Error: package openldap-2.4.21-6.fc13.x86_64 (which is newer than openldap-2.4.21-4.fc13.i686) is already installed package nss-softokn-freebl-3.12.4-19.fc13.x86_64 (which is newer than nss-softokn-freebl-3.12.4-17.fc13.i686) is already installed
I have a WUSB600N v2 and it is working great for me. Here is all you have to do. Go here and download the RT3572USB driver [URL] The file you download is called 2009_1222_RT3572_LinuxSTA_V2[1].3.0.0.tar.bz2 expand it with the command "tar xjf 2009_1222_RT3572_LinuxSTA_V2[1].3.0.0.tar.bz2"
open the file os/linux/config.mk and edit the following lines: Change HAS_WPA_SUPPLICANT=n to HAS_WPA_SUPPLICANT=y and Change HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n to HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y Next edit the file common/rtusb_dev_id.c and add the USB ID of the card to it. {USB_DEVICE(0x1737,0x0079)}, /* WUSB600Nv2 */
sudo make sudo make install reboot and your done.
If you have added the USB device to any other drivers following other threads you will want to either remove that line and recompile those drivers OR black list those drivers. After doing the above this NIC is working great for me in Ubuntu 9.10 and getting N speeds.
Last nights upgrade of java-1.6.0-openjdk-1.6.0.0-43.1.8.2.fc13.i686 and java-1.6.0-openjdk-plugin-1.6.0.0-43.1.8.2.fc13.i686 prevent the loading of Ameritrades Command Center.Downgrading to version 1.6.0.0-37 fixes the problem. I'll post the bugzilla number as soon as I get the chance to file it.
my wireless adapter(WUSB600N) doesn't run when I log in. The driver is loaded on start-up but the green light is not on the adapter. I have to physically disconnect the adapter and plug it back in to get it recognised and it works fine afterwards
I got the WMP300N installed by using ndiswrapper, but in Network Settings in YaST, I enter in all the info, and it will not connect. I set the Module Name as ndiswrapper, but it still won't connect. I blacklisted bcm43xx as some guide told me to. Could that be the problem?
I just installed Ubuntu 10.04 on my formerly XP system, and I'm trying to get my wireless network working. I have a Linksys WUSB11 v2.6 wireless adapter connected by USB to the system.
The system networking icon reports "No wired networks".
I'm not sure whether or not the system sees the USB ports... If so, it apparently doesn't recognize the adapter.
I saw a few posts that indicated that this adapter didn't work on 10.04 but it had worked on 9.04.
I'm looking for any info to get this working, including any or all of the following:
* How to determine if the system sees the USB ports (or is it "obvious" that it does)
* Should the wireless adapter work just by plugging it in?
* How to troubleshoot the networking adapter to get it working
* (If downgrading to 9.04 is likely to solve the problem) how to downgrade to 9.04 from 10.04...
I just joined this forum in hope of fixing my linksys wireless card, here is my problem. I have a old Compaq presario 1710sb laptop with a p1 32mb ram and a 2GB hard drive. I installed a Debian Lenny command line only install, I installed ndiswrapper from a etch .deb file I found on the internet but I can't find out how to get it working. I tried how tos on other sites but they didn't work, I need to get that card working before I can install a GUI.
I read through the sticky of wireless card not working, and I followed through with the steps, with the exception of looking for firmware, because I'm certain it has it, being that the card works when I'm running Windows, and overall the system recognizes the device.
The only difference is, I notice that the activity light on the card itself does not turn on when running openSUSE. It recognizes the card, it even detects the network, but when I enter the WEP key and finish, it does nothing afterwards. Still no internet.
I really need to get a linksys wpc54g version 4 pcmcia card to work....i have never really had a lot of problems with wireless and thit is a friends laptop that he wanted ubuntu on......if i cant get it to work he will go back to windows and i would not like that to happen lol....here is the output of dmesg and ifconfig lspci and lspcmcia..
Code: thomas@thomas-laptop:~$ dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-20-generic (buildd@palmer) (gcc version 4.4.1
I'm running Ubuntu 10.10 Maverick on a Toshiba 2435-S255 laptop with a WPC54GSV2 PCMIA wireless-g adapter. I have ndiswrapper installed, and installed the driver (I know it works because it's the same driver I used with Win XP). When I type sudo ndiswrapper -l it tells me this:
I think I am supposed to blacklist something but I don't know what. I added b43 to blacklist.conf and that just took away the wireless connections in the network connections. In the Device Manager under CardBus Bridge it has Network Controller and info.linux.driver's string is ndiswrapper. I wanted to uninstall the driver to see what the Device Manager would show but I don't know the name of the driver. I did sudo ndiswrapper -r 14E4:4318 and it just said there was no driver by that name.
I have a WPC100 linksys network card. I have ubuntu 11.04 installed. My laptop is a D610.
I have done a LOT of google searching and not seeing any solutions on how to successfully get it working.
I have tried the ndiswrapper and it does install the driver but then says "no hardware present".
I have also blacklisted the broadcom drivers.
I am coming to the conclusion that it will never be possible to get the WPC100 to work. (note I also have been to the support page and do not see it there. )
I have a AE1000 wireless adapter and Ive been using it or about 4 months on windows xp. Yesterday I installed ubuntu 10.10 and it won't work It won't connect to the internet and won't even show signs that it is turned on.
I'm not a new user to ubuntu but I'm stuck with a driver issue on a wireless adapter upgrade for ubuntu 10.04 lucid lynx. I'm running an acer aspire am1201-e1622a with amd athlon x2 64 bit processor, however i'm only running the 32 bit version of lucid lynx. The following are a few outputs of some commands that might assist in finding the proper driver. Before though i will tell you what i have done.
I have installed a few different drivers from windows wireless driver installer such as the xp and vista 32 and 64 bit versions with no success in the computer actually recognizing that i have a wireless adapter installed. The windows wireless driver installer said that hardware was present but i was unable to scan for networks or even see that i had a choice to do that. This meaning that it didn't show i had wireless capabilities in my network manager. i tested this with gnome network manager which is the default manager for 10.04 and also with wicd with no success.
Following these tests i attempted to install a driver from source following the instructions on another forum. This allowed me to manually turn on the wireless adapter but i was still unable to find any networks. This meaning that wicd was able to see that i had a wireless adapter installed but it for some reason was unable to see any wireless networks around. I'm 100% sure my router is in range and that it is configured correctly. I have 5 other computers connect to this router along with some of them being ubuntu.
