Fedora Hardware :: Linksys WUSB600N Wireless Usb Device 15
May 27, 2011
I started a fedora 15 live cd last night, and at the top right corner, i noticed that wireless was not active. Right mouse button on the internet icon showed me that fedoar recognized the usb device as it is,, a Linksys WUSB600N wireless lan.
However, fedora warned me that the firmware was not available, therefore i was not able to configure the WUSB600N. To be specific,, it's the V2 version.
My question is,, does this device work with linux fedora? i assume that i need to install the required firmware in order to use the device.
View 6 Replies
ADVERTISEMENT
Apr 27, 2009
I'm trying to install a Linksys WUSB600n dual-band USB wireless-N adapter onto a desktop system with opensuse 11.1 installed; this system will be migrating to a back porch with no cabling access, hence the wireless solution. Everything works fine under Windows XP, but on Linux, not so much. Hardware info is as follows; there is no "Wireless LAN" entry, but there is a USB entry:
99: udi = '/org/freedesktop/Hal/devices/usb_device_1737_71_noserial'
info.subsystem = 'usb_device'
usb_device.vendor = 'Linksys'
usb_device.bus_number = 1 (0x1)
linux.subsystem = 'usb'
usb_device.product = 'Dual-Band Wireless-N USB Network Adapter'
info.product = 'Dual-Band Wireless-N USB Network Adapter'
[Code]........
View 9 Replies
View Related
Jan 3, 2010
i cant connect to my wireless network... im using karmic. Ive searched and found quite a lot of threads but arent sure where to start. I have a Linksys wusb600n, and are trying to connect to my network. It detects the network fine but doesnt connect.
View 1 Replies
View Related
Jan 18, 2011
After much tiddling'n'fiddling I finally got my new Linksys WUSB600N v2 working. Contrary to many posts, mine did NOT work with either the standard rt2870sta module, nor the updated version from the driver:wireless repo. Also the rt2870 version from the ralink website didn' t work. After a days worth of Googling I came across this post. The bottom line?
1. Download rt3572 from the Ralink website.
2. Add {USB_DEVICE(0x1737,0x0079)}, /* WUSB600N v2 */ to common/rtusb_dev_id.c
3. Follow README_STA
I did not install firmware packages. And be sure the rt2800sta module doesn' t get loaded. (you could just remove it, I suppose.)
View 9 Replies
View Related
May 24, 2009
I'm new to openSUSE and as a matter of fact, to linux too. I've got a Linksys WUSB600N wireless adapter which used to work fine with some live versions of linux that I was testing out before moving onto suse... Each time, upon booting using live CDs, I used to copy the driver I had downloaded from:
SpeedShare - Download rt2870-kernel-2.6.24-nemesis.tar.bz2
Then 'make' and get into the driver's os/linux directory to load the driver using 'insmod rt2870sta.ko' Now, upon doing a 'make' and 'make install', followed by the 'insmod rt2870sta.ko', I get the error saying:
insmod: error inserting 'rt2870sta.ko': -1 Invalid module format
I tried doing 'modprobe -rv rt2870sta' and didn't get any error messages. But while doing 'modprobe -v', this error shows up: insmod /lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko
FATAL: Error inserting rt2870sta (/lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko): Invalid module format
View 7 Replies
View Related
Aug 8, 2010
FC13 i686. Trying to compile a driver for Linksys WUSB600N Ver. 2 from a Ralink driver.tar.gz. Below is a portion of the output of the compile, I can't put this whole output on this LinuxQuestions Website it is to large.
In file included from /lib/modules/2.6.33.6-147.2.4.fc13.i686/build/include/linux/usb.h:21, from /home/jim/Downloads/RT3572/2010_0709_RT3572_Linux_STA_v2.4.0.1/include/os/rt_linux.h:62, from /home/jim/Downloads/RT3572/2010_0709_RT3572_Linux_STA_v2.4.0.1/include/rtmp_os.h:42, from /home/jim/Downloads/RT3572/2010_0709_RT3572_Linux_STA_v2.4.0.1/include/rt_config.h:72, from /home/jim/Downloads/RT3572/2010_0709_RT3572_Linux_STA_v2.4.0.1/common/crypt_md5.c:28:
/lib/modules/2.6.33.6-147.2.4.fc13.i686/build/include/linux/sched.h: In function "get_mm_hiwater_rss": .....
View 5 Replies
View Related
Sep 3, 2010
I think lightning may have killed it. It was working fine. Now I cant get it recognized no matter what I do. It also quit working in Win XP where I never had a problem with it because it had its own connection software.
dmesg yields this-
RTUSB disconnect successfully
[ 312.876034] usb 2-1: new full speed USB device using uhci_hcd and address 7
[ 312.996021] usb 2-1: device descriptor read/64, error -71
[ 313.220031] usb 2-1: device descriptor read/64, error -71
[ 313.436038] usb 2-1: new full speed USB device using uhci_hcd and address 8
[ 313.556025] usb 2-1: device descriptor read/64, error -71
[ 313.780031] usb 2-1: device descriptor read/64, error -71
[ 313.996032] usb 2-1: new full speed USB device using uhci_hcd and address 9
[ 314.404022] usb 2-1: device not accepting address 9, error -71
[ 314.516021] usb 2-1: new full speed USB device using uhci_hcd and address 10
[ 314.924029] usb 2-1: device not accepting address 10, error -71
[ 314.924046] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 343.664017] pan0: no IPv6 routers present
[ 809.024049] usb 1-1: new high speed USB device using ehci_hcd and address 10
[ 809.182271] usb 1-1: configuration #1 chosen from 1 choice
[ 809.182837]
[ 809.182839]
[ 809.182840] === pAd = ffffc20020b41000, size = 598568 ===
[ 809.182841]
[ 809.182845] <-- RTMPAllocAdapterBlock, Status=0
guest3@guest3-desktop:~$
View 4 Replies
View Related
Feb 3, 2011
i'm very new at this and tried to install Linksys WUSB600N v2what i would like to know how uninstall any drivers/ software i may have already put on the os. how can i verifry that the device is functional after installing drivers.
View 1 Replies
View Related
Jul 16, 2011
My OS is Linux Xubuntu 11.04 (32 bits) and I'm trying to get Linksys Wusb600n network adapter to work. I followed this post and did all that was written in it... almost. When i came to blacklisting, I blacklisted all drivers that starts with rtx (where x is any digit). Here are lines that I pasted in blacklist.conf:
Code:
blacklist rt2860sta
blacklist rt2870sta
blacklist rt2x00usb
blacklist rt2500usb
blacklist rt73usb
blacklist rt2800usb
blacklist rt2x00lib
blacklist rt2x00pci
[Code].....
The problem: I do see all available networks. So I guess... it somehow works. Anyway, problem is that it does not connect successfully to my network. I click on it - it asks my password. I enter it and click 'Connect'. Nothing, except that network icon is started to like spin around (trying to connect, I guess), happens. After few minutes, it asks for password.... again. I enter it and all starts from the beginning. Its like a loop! Note: I don't have any other things installed except linux-firmware-nonfree_1.9_all.deb and, don't know how successfully, but RT3572USB 2.5.0.0.
View 1 Replies
View Related
Jan 17, 2011
Im having another problem with my wireless in Maverick, Im at my wits end with this thing and dont know what to do next. I followed Dev0's from this thread.And now when ever I start my computer I get a notification that says "Linksys C" connected. Then only a few seconds later it says Disconnected and then from then on every few minutes the Password prompt pops up and then I enter my password and then it just keeps going in that cycle until I click cancel.
View 1 Replies
View Related
Dec 14, 2010
I have a Linksys Wireless-G USB Network Adapter, 2.4 GHz, 802.11g. It hooks up through USB plug, and when I originally plugged it in I got the message that ubuntu didn't support the drivers, but haven't seen it since. I'm hooked up to a LAN cable right now, and can't seem to figure out how to hook up through wireless with this device. Or I just don't know how. When I click on the network connections button on the top right corner (the two computers). I can see my Wired Internet, but no wireless. When I type lsusb in a terminal I get : (sorry I don't know how to do code blocks) So it is recognizing that it's there, but maybe I just don't know how to use it. Also, I'm running Ubuntu Release 10.04 (lucid).
View 1 Replies
View Related
Jan 24, 2010
I have a laptop running 11.2 with an internal Broadcom-based Wi-Fi card that's working fine. I'm trying to get 802.11n going with the WUSB600N. The USB ID on this device is 1737:0079. I believe this means it's a "V2" with an RT3572 chip.
No driver loads for this device when it's plugged in. If I do a "modprobe rt2870sta", a driver loads, and syslog shows "rtusb init" and "usbcore: registered new interface driver rt2870". But ifconfig -a doesn't show a new network interface. I've also tried building the RT3572 driver from the manufacturer's web site. It builds fine, and modprobe will load it, but I get the same results as the rt2870sta driver.
View 1 Replies
View Related
May 4, 2011
I see a bunch of posts about WUSB600N, often telling folks to download and compile proprietary drivers from ralink's website. With Ubuntu 11.04, getting WUSB600N to work might be as simple as disabling rt2870sta (for rev1). If you have rev 2 card, driver to disable is I believe rt3572sta. Even if you need to recompile drivers by hand, the right thing to do is to first try nightly build of rt2x00 drivers from [URL], and fall back to ralink provided drivers only if things do not work out with rt2x00 drivers. I saw recent updates on rt2x00 mailing list for rt3572 chip, give it a try if you have rev 2 card.
WUSB600N rev 1 (rt2870 chip) should "just work" with rt2x00 driver included with 2.6.38 kernel in Ubuntu 11.04. At least it works for me. You may need to blacklist rt2870sta driver from staging directory so that it does not load and interfere with rt2x00 drivers. There's one small annoying issue with power save mode on rt2870 chip when rt2x00 is in use, which seems to have just been fixed upstream. Most users will never notice it, but if you do notice card re-connecting to AP every 10-20 minutes or so, simply disable power saving, and all will be smooth (iwconfig wlan0 power off). If you have an older Ubuntu release (kernel 2.6.35) and rev 1 card, you should be able to download nightly build of rt2x00 driver from [URL]. It worked for me just fine with previous Ubuntu releases.
View 1 Replies
View Related
Jun 18, 2009
I just installed Fedora again, after a long absence. I have been using XP. I am having issues setting up my wireless card Linksys WMP54G. For some reason the card has been recognized, and the interface is there. But I have tried every walk-trough known to Google, and it still won't work. I have been using the GUI tools, but they don't work. I have also been using the command line walk through, and they aren't working either. Does anyone know which files I need to set and what the process would be?
View 3 Replies
View Related
Jun 20, 2009
I'm having trouble getting my wifi devices to work on my 128bit WEP network. I have a new Thinkpad T400, with an internal Intel PRO/Wireless 5100 AGN. I also have some cardbus cards: a Lucent ORiNOCO Gold, a Linksys Wireless-G, and a TRENDnet TEW-421PC. I have them set up as interfaces eth2, eth1, and eth3. (The TRENDnet isn't recognised as a network card at all, so no interface for it.) I have installed the latest firmware for the Linksys card.
The /etc/sysconfig/network-scripts/ifcfg-* files are virtually identical for all of them, differing only in the HWADDR and DEVICE lines. So here's the behaviour:
1. The Lucent card comes up just fine.
2. The internal 5100AGN and the Linksys cards won't come up, and watching with iwconfig shows that they're either associated with my AP OR they've got an encryption key set -- but not both.
3. When trying to bring up the 5100AGN, I get the following messages:
iwlagn: index 0 not used in uCode key table
iwlagn: index 3 not used in uCode key table
/var/log/messages shows DHCPDISCOVER requests being sent, but they're bound to fail since the association with the AP with WEP isn't being completed. And yes, the ifcfg-* files really *are* identical except for the DEVICE and HWADDR lines. The /etc/udev/rules.d/70-persistent-net.rules file correctly maps the interfaces to the MAC addresses. So why does my antique ORiNOCO card work and thew newer ones fail? How can I track down what's being done wrong/not being done?
View 4 Replies
View Related
Nov 11, 2010
well I am a novice in Linux OS, I have a wireless card, it's a Linksys WUSB600N but it doesn't work in Ubuntu 10.10 Desktop Edition, which it is the one I have, 64 bits machine, so I read this [URL] and I did all the steps, I downloaded 2010_0915_RT3572_Linux_STA_v2.4.0.2.tar but in the last part, sudo make install I got this error
alain@alain:~/t/2010_0915_RT3572_Linux_STA_v2.4.0.2$ sudo make install
make -C /home/alain/t/2010_0915_RT3572_Linux_STA_v2.4.0.2/os/linux -f Makefile.6 install
mkdir: cannot create directory `/etc/Wireless': File exists
make[1]: Entering directory `/home/alain/t/2010_0915_RT3572_Linux_STA_v2.4.0.2/os/linux'
rm -rf /etc/Wireless/RT2870STA
mkdir /etc/Wireless/RT2870STA
[Code],,,,
so i have no way to get connected to the internet, what is that error cannot stat `rt3572sta.ko': No such file or directory, I think thats why i can make the wireless card work.
View 7 Replies
View Related
Jun 20, 2010
I'm try to setup a wireless network with my linksys wireless router and my HP laptop dual booting Vista & Suse 11.2. I have the vista networked, just fine. Where I can share files and the printer connected to my desktop. But I want to be able to use Suse in the same way, full time and to stray away from Vista. My wife and kids like easy. So I'm trying to transform them and show them something new.
View 9 Replies
View Related
Jun 1, 2010
Bus 001 Device 008: ID 13b1:000d Linksys WUSB54G Wireless Adapter
wlan1 Link encap:Ethernet HWaddr 00:18:f8:33:91:7d
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0[code]........
It is the linksys WUSB54g V4, im assuming it runs on the rt2500 chipset,when im connected and working it runs fine, however if i try to let a download run, it generally will disconnect and require me to unplug the device and plug it back in to get it working again, i cant just reconnect if i do that it simply wont connect, im connecting to a linksys router with the most recent firmware i think its the wrt54g v7, its setup using a wpa personal password and im connected through manual entry of my ip address due to port forwarding for some of my games, however the same issue persists even when im connected through an automatic configuration.
View 1 Replies
View Related
Jul 12, 2011
The usb device scans in Windows with a driver but i can't find a linux driver so i installed ndiswrapper.
ifconfig does not list the wlan0 device. iwconfig lists wlan0 YaST2 doesn't find any networks. Ethernet works just fine.
View 7 Replies
View Related
Mar 25, 2010
My first Ubuntu/Mythbuntu install. Installed OS, plugged in linksys wireless G adapter. It finds the network but cannot connect. Discovered wireless priviledges while setting up admin/user accounts. Should be ready to go. or not, I'm thinking it needs a driver but
1) in linux? certainly not in Fedora.
2) If it can see the network it doesn't need a driver,
My settings are wrong or I'm missing something. SSID is set in settings. Do I need mac address and BSSID?
View 1 Replies
View Related
Jul 13, 2010
Previously I had my desktop hooked up to a nearby router via an ethernet cord with my parents' computer having a wireless usb adapter to connect (This thing: [uRL]). We just moved and our setup has reversed (router is near their computer, I am using the usb adapter). I just installed the latest Ubuntu and now I can't get the usb adapter to work. I'm very new to Linux and I have no idea what to do. I think this is the same usb adapter.
View 1 Replies
View Related
Nov 11, 2010
I have a linksys wireless-b wmp11 network card. Can anyone tell me how to get this up and running? Maverick is up to date as of yesterday and I have the cd that came with the card. I have no way to access the internet on the machine. I am typing this from my laptop.
View 2 Replies
View Related
Nov 11, 2010
I actually wasn't even trying to install the adapter which is the funny thing, I just finally got around to installing mandriva 2010 on my desktop and happened to have the adapter already hooked up to a usb port for my windows installation. When I got done with the installation to my amazement it got recognized and I didn't have to do a thing!
I looked into installing the adapter on my laptop which already had mandriva 2010 on it and gave up cause I didn't find any post's here that addressed the issue very well. Just thought I would pass it along for anyone who want's to try this on there computer.
View 3 Replies
View Related
Jan 29, 2010
The linksys wusb54gcv3 usb wireless device appears to have either the ralink 2070 or the ralink 3070 chip. Has anybody got this to work in Slackware 13? I searched this forum and haven't found any current solutions. Nor can I find a current slackbuild for this device's chip.
Here is the output of dmesg | tail for the device:
usb 2-1: USB disconnect, address 2
usb 2-2: new full speed USB device using uhci_hcd and address 3
usb 2-2: New USB device found, idVendor=1737, idProduct=0077
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: 802.11 g WLAN
usb 2-2: Manufacturer: Ralink
usb 2-2: SerialNumber: 1.0
usb 2-2: configuration #1 chosen from 1 choice
No modules loaded for the device, however.
View 9 Replies
View Related
Oct 4, 2009
my wireless adapter(WUSB600N) doesn't run when I log in. The driver is loaded on start-up but the green light is not on the adapter. I have to physically disconnect the adapter and plug it back in to get it recognised and it works fine afterwards
View 2 Replies
View Related
Mar 3, 2010
I just joined this forum in hope of fixing my linksys wireless card, here is my problem. I have a old Compaq presario 1710sb laptop with a p1 32mb ram and a 2GB hard drive. I installed a Debian Lenny command line only install, I installed ndiswrapper from a etch .deb file I found on the internet but I can't find out how to get it working. I tried how tos on other sites but they didn't work, I need to get that card working before I can install a GUI.
View 14 Replies
View Related
Jan 30, 2010
I read through the sticky of wireless card not working, and I followed through with the steps, with the exception of looking for firmware, because I'm certain it has it, being that the card works when I'm running Windows, and overall the system recognizes the device.
The only difference is, I notice that the activity light on the card itself does not turn on when running openSUSE. It recognizes the card, it even detects the network, but when I enter the WEP key and finish, it does nothing afterwards. Still no internet.
Card: Linksys WMP54G v4.1
View 5 Replies
View Related
Mar 13, 2010
I have a Linksys WPC300N v1 "Wireless-N Notebook Adapter" which uses the Broadcom 4329 chipset. Is there a way to troubleshoot and configure this card to use wl, b43, ssb? Preferrably via CLI. I have a couple years of CLI experience in Debian/derivatives (but only in my spare time ).
I have this card recognized and running adequately in Debian (and derivatives) using the 'wl' driver (sometimes supplied by debian.org, other times by broadcom.com). The one hint at a solution for this particular card/chipset I have found searching the OpenSUSE (SuSE for short?) forum points me to using ndiswrapper, which I've never used nor care to if it requires wine. I'm trying to ultimately connect to a b/g/n WPA-1 TKIP wlan.
lspci -v:
03:00.0 Network controller: Broadcom Corporation BCM43XG (rev 01)
Subsystem: Linksys Device 0058
Flags: fast devsel, IRQ 11
Memory at f4000000 (32-bit, non-prefetchable) [disabled] [size=16K]
lsmod | grep 'ssb' returns nothing (neither do 'b43' or 'wl') but 'pcmcia' returns:
pcmcia_core 41748 3 pcmcia,yenta_socket,rsrc_nonstatic
When configuring this card in Debian, I first plugged in the card which resulted in some hard disk activity but the LED was not lit. After installing the driver, the LED came on but no network. After configuring the network, it works 'adequately' (no roaming mode) using the wpa_supplicant package and is readily identified during init.
This is not mission critical by any means so I'm not in a hurry and willing to try almost anything. However, this is an old laptop so I'm even somewhat surprised that KDE4 is running as well as it is (KDE 3.5.10 runs quite well, which is more than I can say for the latest Gnome DE; xfce "screams" relatively). Dell Latitude C-610 PIII-M 1.2 GHz 512 KB cache 512 MB RAM (YaST2 reports this as a C-640 but this does not agree with the BIOS splash). The display is an ATI Radeon LY using the 'radeon' server (default). I don't do compositing here. ;-)
View 9 Replies
View Related
Apr 1, 2010
I've tried it using the Ubuntu 9.10 live CD (both 32-bit and 64-bit versions) and while the adapter can see wireless networks, it can't connect to them. It asks me for my WPA2 key, but after trying to connect for about 30 seconds it asks me for it again. I've read other threads about this issue but they were kind of confusing.
I just need to know whether the adapter will work and if so, how to get it to connect. I'm so sick of Windows and I'd love to switch to Linux, but I won't be able to if I can't get my adapter to work.
Edit: I just noticed the sticky about posting wireless tickets. I'm sorry, I don't have time to post it right now, but I will post all of that information when I get back.
View 9 Replies
View Related
Jul 15, 2010
I have a dual partition with xp pro, and Ubuntu 10.04. It really is amazing, and i plan on erasing everything and starting over new again, this time just ubuntu. with windows, i have a Linksys Compact Wireless G usb Network Adapter with speedbooster ver.2. it works in windows from the CD, but its for windows. ive tried ndiswrapper-utils, ndiswrapper-common and ndisgtk downloads and it opened the program, but sat with the spinning circle for 5 seconds then faded to grey. HOW do i get this to work? i'm in a hurry, as i am leaving for vacation in florida, and i have the only laptop in the house and we bring it every year. If there is something easy (or complicated but with step by step) that i could use to get the driver for my usb network thingy,
View 2 Replies
View Related
