Ubuntu :: Stuck On Loading Screen After Removing KDE
Jan 18, 2011
I installed KDE but decided to remove it after a while as I wasn't using it and its application were redundant on my Gnome desktop. I followed Psychocats' guide for "pure Ubuntu" but after rebooting, Ubuntu just hangs on the loading screen (or during 'checking battery state'). I tried booting in recovery mode but I'm unable to navigate the menu: when I press a direction key it alternates between the menu and the Ubuntu loading screen. Several other keys do the same thing, while the rest do nothing.
View 5 Replies
ADVERTISEMENT
Feb 5, 2010
I'm using ubuntu 9. For some weird reason, sometimes when i log in only the ubuntu logo shows up. It says "Grub loading" and then the logo appears, but the harddrive isn't accessed. After about 2 minutes, the logo disappears and the screen goes blank. I have to shut down the computer manually. The weird thing is, it only happens every so often..about every other boot up.
View 1 Replies
View Related
Jan 5, 2011
I simply installed 5 or 6 various packages and shutdown the laptop, later I opened it and turned it on GRUB came up as usual showing the usual options, I selected the option I always pick and Ubuntu came up as usual with the progress bar of 5 or 6 dots that show the typical progress bar but it stays like this forever. I tested it for up to 3 hours it didn't budge.
I tried selecting the recovery option from the GRUB menu and it appears to load normally with a bunch of console output but then halts with the last message displaying:
Code:
cloud-init start-local running Wed, 05 Jan 2011 20:43:44 -0600. up 14.26 seconds
no instance data found in start local init: cloud-init-local main process (357) terminated with status 1
But before the message there was a lot of warnings that appeared to trail off as there were so many, here is an example of one of them as they all appear to be the same just different rule numbers, this is also the last one before the error:
Code:
udevd[353]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/99-sbig.rules:59
View 9 Replies
View Related
May 26, 2011
I'm running windows 7/Ubuntu 11. When I attempt to load into my ubuntu partition, I hear the logging in sequence, but it stays in the loading screen, and I can't do anything. I've found I can get it to log in every fifth time or so, but mostly nothing.
View 2 Replies
View Related
Nov 19, 2014
Naturally a Windows user, because all of my computers were with pre-installed Windows and I was young.. and I get used to it..In the time of.. growing up I became programmer and learnt how bad is actually Windows coded. Not only that.. Linux has better support for developers.So.. I was Windows user till yesterday. I finally decided to work on Installing Linux or more specifically - Debian.I love everything part of the GNU - GIMP, GTK+, Gedit, GCC...
Well I can't use my PC, both of my operation systems are non-functional.Windows get stuck (which is something completely typical for Microsoft stuff) on Windows logo screen, or safe mode loading files..Debian installation is messy.Firstly I installed Debian 6.0 on a Virtual DVD Disc mounted. I followed the installation process strictly and move forward to Debian startup.It asked me for account. root as "username" and the password as "password" didn't work so I logged in as "localhost" normal user.
However.. I started to realize that I actually also had to install the Graphical Environment in order to have Debian with the desired GNOME Desktop.. I went to aptitude to install the Graphic Environment Package but it said that I have no root rights.. I tried to log-in again, using the correct details but failed.I tried to get in, using the sudo command, but the sudo command also didn't work. Of course.. since I can't install packages, I can't either install sudo."su -" or "su" also prompt me to select a password which I apparently have no clue of.
Then I went to Debian Recovery, because there I was logged as root. It also pointed out that "Root Account is locked". I went to install packages finally.. But when the installation started to proceed It asked me for disk insertion in a specific folder?There I got lost completely.
View 12 Replies
View Related
Mar 6, 2010
I have 3 hard disk drivesone regular and two sata: Ubuntu / is installed on sata /dev/sda6 Ubuntu /boot is installed on /dev/sda1econd sata hard disk /dev/sdb is emptyI have just reformatted it to ext3third hard disk is /dev/sdc with some fat and ext3 partitionsif I shutdown computer, then plug out one of sdb/sdc or both of themthen after BIOS I see grub menu (as usual)but if I hit any keyboard button the computer automatically rebootswithout any messagesI tried hitting c,e,enter - reboot I tried reinstalling grub like this:
$ grub
grub> find /grub/menu.lst
(hd0,0)
[code]....
View 4 Replies
View Related
Jul 18, 2010
I upgraded my Ubuntu 8.04 LTS server to 10.04 LTS - rebooted and things ran good. I knew I had a few problems, but DHCP and DNS were booting up and working fine for me.I went to take a look at Webmin, but apparently that's been removed from support for Ubuntu 10.04 - so I thought, I'll use eBox. I realized that Ebox didn't have the network module turned on, so I tried to turn it on. I found out the installation was missing scriptaculous, so I got that and installed that and then turned on the network module.I then rebooted the machine - and now nothing. It hangs when I get to the load for Apache. I would like to disable the network module for eBox, but can't find documentation for how to do that from the command line - which I have to use because the damn box won't boot and I'm running from a Live CD.
View 4 Replies
View Related
Feb 6, 2010
I'm stuck in Memtest86, everytime i boot it gives me an option to go into BIOS, and then it says "Loading GRUB." After that it automaticly goes into memtest, and I've let it finish numerous times without giving me errors. I've installed Linux Mint 8 via Unetbootin, I have a nearly fresh install of windows 7 on my laptop.
View 1 Replies
View Related
Jun 24, 2011
I've just installed Debian 6.0.1a on a HP Proliant ML115, the install seemed to go ok. As it began to start up it 'Grub Bootloader' loaded then on the screen after the bootup froze at 'Loading initial ramdisk'
Unfortunately im a complete novice to debian
View 10 Replies
View Related
Jun 2, 2010
it stuck after loading. should got login window. instead it show me a blank page and a blinking courser i can only press ctrl+alt+del it will reboot my laptop n stuck after the loading process
View 2 Replies
View Related
Sep 22, 2010
I upgraded to fc13 from fc12 recently. After the upgrade the virtual machine boot is stuck in grub loading stage 2. I have attached a screen shot of the picture for reference.
View 5 Replies
View Related
Jul 21, 2011
I installed Ubuntu 11.04 today as the main OS on my laptop.I had deleted my XP partition, and repartitioned it according to a guide I had found. (http:url)......Basically it was setup like this: 500mb ext2 primary partition, has the grub folder, I believe this is either the '/' partition, or the '/boot' partition 2gb swap space logical partition
10gb ext4 logical partition -- this is either the '/' or the '/boot', it contains the 'bin,boot,cdrom,dev' etc folders 243gb (the rest of my hard drive, with the exception of a partition that contains documents and files from my XP OS, formatted to NTFS) ext4, this is the one that has all my desktop/documents/etc folders.After Ubuntu was done installing, I had some message pop up about installing an ATI proprietary driver for my ATI graphics card (an ATI Radeon HD 4330, I believe, I may have messed that number up). I installed it and rebooted, no problem.
Next, I had another update window pop up with 198 items checked and ready to download and install. I went through all of this, and rebooted, again, no problem.Next thing I did was install some apps that were essential for me to have to use for my work (an ide, chat programs, etc). No problem with any of that.Last thing to install was the OSE Virtualbox, and then I installed WindowsXP Pro and Windows Vista Business, then installed the guest addition addon for VB. This all worked without any issues whatsoever.
Time goes on, and I notice my computer is heating up much more than (seemingly) normal. I begin to wonder if its my graphics card. So I shut down the computer and let it cool down. Reboot, and no problem, still working fine.Then I opened a couple of apps and tried a simple game (can't remember the name) I believe it was a simple 3d topdown, as I wanted to test my graphics card. This is where things seemed to start to go wrong. My laptop began hanging, not even allowing me to access the terminal via ctrl+alt+f2. The screen flashed and I saw the blue/green/grey fuzz that I get when the graphics card is starting to heat up too much. Then everything hangs and I can't do anything at all, including move the mouse. I did a hard reboot (I believe this is what you call pulling the plug/pressing the power button, correct me if I'm wrong). I then rebooted, saw a chkdisk, then it booted seemingly normal, but it hung right after the purple screen after the grub screen.
This is pretty much where I'm at right now. I strongly suspect the fault is with the ATI drivers, but have been completely unsuccessful in my attempts to fix it. I've googled just about everything I could think of, along with searching these forums. I've tried just about everything listed in the forums, but to no avail.I've tried the commands that are supposed to purge the ati drivers, but all I get are errors that say they can't remove the 'virtual drivers'.
Right now I'm booting off a live cd, so I know the computer still works fine, just not my actual installed OS. I'd really like to get the issue resolved without having to reinstall, as it took quite awhile just to get it usable in the first place, but this has already taken so much time, I may just resort to that if we can't solve it any other way. Got too much work to catch up on as it is.As a re-instated note, perhaps if you have any tips, but not particularly about fixing the OS, my laptop (I'm strongly guessing my graphics card) is heating up much more than normal, compared to that when XP was installed. Is this more than likely just a driver issue, as is the rest of it? Also, I did have Compiz installed, though I didn't choose for it to be installed, I believe it came pre-installed. I've heard it could cause some issues, though I have no idea as to the validity or relation to this particular issue.
Edit:
I just remembered while searching for a solution, I found a post somewhere that said something about the information not being sent to the monitor from the graphics card properly, thus no desktop. I'm guessing that'd still fall under the driver issues, but again, I'm unsure. I would think that wouldn't be entirely true anyway, since I can still see my mouse fine, just no desktop, only a black screen.
View 1 Replies
View Related
Oct 2, 2014
So I managed to install Debian Jessie on a MSI G70 2PE Apache Pro that came with Windows 8.
First I partitioned some space on the laptop. Then I put on the net install cd for Debian and installed it on UEFI mode. It installed correctly.
Now I'm on Grub and when Debian tries to boot it gets stuck on "Loading initial ramdisk". The cursor under it doesn't even blink. The only way to get out of there is by Ctrl-Alt-Delete. Secure Boot is turned off. Fast boot is also off. If I try to boot on recovery mode gets stuck all the same.
The options on my grub are
Debian GNU/Linux
Advanced options for Debian GNU/Linux
Windows Boot Manager (UEFI on /dev/sda2)
System Setup.
If I choose the Windows option, Windows boots, no problem.
If I choose the edit option for the Debian entry this is what it shows
Code: Select allload_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
[Code] ....
What is happening and what should I try to make this work? Could it be a graphics card issue since this computer has a Nvidia Gpu?
View 1 Replies
View Related
Oct 25, 2010
I have been using ubuntu wel a long time now and I know my way around in linux but I recently updated my laptop from ubuntu 10.04 to ubuntu 10.10 all went fine until I had to restart my laptop. I got a purple screen (loading screen) with 4 dots and a oldskool like font which said: Ubuntu 10.10 Right after that the screen goes purple and its like the system halts I hear no login sound etc just a purple screen. So I did a clean install from the 10.10 live cd which booted perfectly fine and the system was also useable like before. But when I installed the system and rebooted it again no problems.
But when I tried to install the proprietary nvidia driver (the recommended one) I got the same problem again the purple screen. After searching a while on the internet I only found posts which had the problem with ATI cards but my laptop is fitted with a Nvidia Geforce 9300 M card. So I tried several things like removing the xorg.conf (read it somewhere) which ofcourse did not work, and booting in graphics fail safe mode which worked. So the point is in 10.04 and 9.10 I CAN use my video card drivers but not in 10.10 is there a solution to this problem? I am talking about the 32 bit version of ubuntu and here's my system hardware profile:
Intel core 2 duo t7350 @ 2,0 ghz / 3mb l2 cache
2 GB DDR3 ram
160 gb hdd
Nvidia 9300m gs
Chipset: I dont know sorry
Model: Samsung R710
View 2 Replies
View Related
Dec 26, 2010
Is there a known problem with the Lubuntu 10.10 image here? I have downloaded it to two different computers, then burned the images to two different blank CD's (different brands) and neither loads. Both only get as far as the Lubuntu menu, once ENTER is pressed at that point to load the LiveCD, a blank screen eventually appears with a flashing cursor at the upper left of the screen, that's it. They were both burned using the slowest burn speeds available.
View 9 Replies
View Related
Apr 15, 2011
like any other Linux newb, I came to Ubuntu because my Windows crashed one time too many. And I chose Ubuntu because "it just works". But these past few days that hasn't been true. I'm posting this from a netbook with Ubuntu, and am having no problems whatsoever, but normally I use an Acer Aspire 5920G laptop. I'll include the specs as written on the sticker:
* Intel Core 2 Duo processor T5250 (1.5GHz etc)
* Up to 1024 MB Nvidia Geforce 8600M GS Turbocache
* 2 GB DDR2
Let me know if you need more details, and I'll add them later. Now, what happened was I clicked "hibernate" while leaving Firefox open. (I've done this hundreds of times, no problem) And when I went to turn it back on the next day there were weird graphical glitches in the loading screen, and it booted to the "tty1" prompt screen. I did a lot of googling and found quite a few posts about it, but the solutions either didn't work, or I didn't understand them. After trying several different suggestions from this forum and others, I managed to delete the graphics drivers. That enabled me to boot in low graphics mode, and naturally, I tried a whole bunch of things to make it work properly again. That only made it worse. Now it went straight from the loading screen to just blanking out and turning the display off. So, I tried new things. Over and over. The weird thing is even when I disconnected my harddrive and ran from a Live USB, the problem persisted. Could there be an issue with the graphics card itself? Anyway, after reconnecting the harddrive I tried to boot again. And it suddenly worked. Even HDMI to my bigger screen worked.
[Code]...
View 1 Replies
View Related
Feb 21, 2010
I been running both OS's for a few months now with no major problems besides wireless internet issues. Today, however, as I go to boot my laptop up, the Dell logo loads with the F2 and F12 boot and setup options which both work. Directly after that though I get the message "GRUB loading. Symbol '?' not found. Aborted. Press any key to Exit." then it repeats when I push a key, and then it tells me to press F1 to retry, F2 to go to setup, or F5 to run diagnostics. It passes all the tests in diagnostics. I've tried booting off of the ubuntu cd I used to load it initially with no luck. So I'm stuck at either that error message or in setup but I can't go any further, and it does not change anything when I tried to boot from the cd.
View 8 Replies
View Related
Feb 19, 2010
When I open some folders with Thunar, even if they don't have more than a few files in them, it takes a very long time to show the contents. Sometimes up to two minutes. It happens almost always if the folder is on my ntfs partition, but sometimes even when it's at /home.I used to run Ubuntu Hardy, and nothing like this ever happened with Nautilus.
View 9 Replies
View Related
Dec 25, 2010
My live USB (persistent 3GB; total space 4GB) is getting "stuck" at the "loading section". It has never done this before. The "loading section" is where it says Ubuntu and there are 4 or 5 "dots" underneath. It just keeps going from white across to red/orange/whatever. I left it for hours (not sure exactly how long) and it was still stuck at that sequence. If you could help me, that would be great. It is Ubuntu 10.04. I do not want to format & reinstall everything because i got all my settings saved on there with all my programs and settings saved. Plus 4-6 hours of updates (bad internet connection). I don't remember changing anything before I shut down. Approximate start-up time is 2 min. with persistence and 30 seconds without (before i did the persistence option i did regular). Approximate shut down time is 1 minute with persistence and 5 seconds without. When I downloaded the Persistence Ubuntu .iso and everything else, I formatted it. I am running everything on a netbook, Asus EEE PC 1005 HAB if it helps. I have Windows 7 Starter installed, too. I am using it right now and Win 7 Starter has not been affected.
View 8 Replies
View Related
Nov 19, 2010
First of all, the title is wrong. It's supposed to say "broken Ubuntu installation", not USB. Okay, so I have read a dozen threads, but none of them have offered me a solution: I was supposed to install Ubuntu 10.10 alongside Windows. I got stuck on the keyboard selection screen, and had to abort and install again. Then I booted from the Ubuntu USB and used GParted to delete the broken Ubuntu 10.10 installation, and the swap associated with this. The next time I rebooted, GRUB 2 was gone. I got a saying:
Code: error: no such partition grub rescue> A lot of searches on Google has not been satisfying, and the most results I get are "How to fix GRUB 2 after installing Windows", which is not my problem. I tried some of the "solutions" I found, most of them did nothing, but I did
[Code]....
View 8 Replies
View Related
Jul 28, 2011
I installed Ubuntu 11.04 (dual-boot with Win 7) and at first the bootloader was working fine; I even installed BURG (although I installed it on hd0 because I don't know how to find out where the MBR is installed...) but it worked fine when I restarted my computer several times. However, when I booted into Windows 7 and then restarted for the first time since installing BURG, I am stuck with the "GRUB loading" screen at startup, and can't get into any OS. I will try using the Live CD, but I'm wondering if the problem was because I installed BURG in the wrong drive? How do I figure out where the MBR is, and how do I fix this with the Live CD?
View 3 Replies
View Related
Aug 4, 2010
Unfortunately my experience in the Unix* based world up to this point has only been using web servers and administrating them, no GUI experience of any kind so I am completely unfamiliar with the setup and entire usage of Xorg or any other Window manager at this point. The issue I am having is with the screen resolutions I am being allowed to chose for my Dell Studio 1535 running Fedora Core 13 and the KDE 4 desktop GUI, thus my issue since I am not really familiar with how to run a Unix* based GUI in the first place.
The basic information, if there is more needed just advise what and what command gathers that info (or what conf/log I should look into in order to find it). Laptop is a Dell Studio 1535 Video is the Mobile Intel GMA X3100 ATI Radeon HD 3200 Graphics. LCD interface is the LVDS.
So far it seems to give me modes for 1024x768 and on down, nothing above this. I believe I am supposed to use the radeon driver being that is the type of card it is but every time I change the xorg.conf file to use this instead of vesa the system wont get past the loading screen anymore upon reboot and nor can I seem to find a way to bring up a command line so I can hit up the Xorg.0.log to see what is wrong or change the xorg.conf file back to the original driver it had listed.
I am going to assume this is a missing driver or something else it hangs on but without being able to get access back to the system and having to rebuild it again (re-install via live CD) I am basically out of luck at this time. Sorry for the rather poor post but I do hope to receive some basic directions on where to go from here with this issue
View 12 Replies
View Related
Feb 22, 2011
another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
View 9 Replies
View Related
Jun 4, 2011
So I have 2 ide hdds but whenever they are both connected, grub gets stuck at GRUB loading stage 1.5. how can I resolve this problem?
both are Maxtors with ext4 fs. primary is 20 gb and secondary 80 gb.
Jumpers are set to cable select.
Boot order in bios is correct. (primary first, secondary isn't in the list at all)
View 8 Replies
View Related
Aug 2, 2010
I just joined the forum today. I'm not a linux beginner per se (about 4 years experience, now running Ubuntu Lucid on my laptop and windoze-free) and I built the desktop PC I'm typing this on six years ago. However, this is my first HTPC build and my first KnoppMyth install, and I've probably done something foolish.
This was an attempt at a fresh KnoppMyth 5.5 install on a virgin system. Hardware details:
MB: GIGABYTE|GA-880GMA-UD2H R
CPU: AMD|PH II X4 925 AM3 RT
RAM: 2Gx2|GSKILL F3-10666CL7D-4GBRH
HD: 1T|WD 7K 64M SATAIII WD1002FAEX - OEM
CD: BLU-RAY BURNER LG | WH10LS30 OEM - OEM
[Code]..
Basically, I just wish I had never bothered with KM5.5 and I want a do-over to go back to the beginning and put the LinHES 6.03 CD in and just do the installation. Since I can't do this, I'd like to at least be able to wipe everything I did and start fresh. Recall that I couldn't boot from CDROM even before I made the daft remove of LILO. The only time I successfully booted from CD was the very first time I turned on the machine to install KM5.5
View 1 Replies
View Related
Aug 15, 2010
I've tried searching the forums, but that didn't help. Pretty much what happened was I installed ubuntu 10.04 32bit version, rebooted my computer, try to login, and I am not able to since I can not even use my mouse or keyboard, it's stuck.Then, I reboot, and it gets stuck at not even loading to the login screen.Could someone have a solution to this?My system specs:
AMD Phenom II x4 955
GA-770TA-UD3
ATI Radeon HD 5750
[code]...
View 3 Replies
View Related
Nov 17, 2010
I removed Cairo from synaptic. Since then Ubuntu doesn't start - it gets stuck on the splash screen, which is Mac-like (since I had installed Macubuntu): I see the apple logo and the rotating wait prompt is running like hell. My pc has dual boot (Vista is my other OS) with grub2 loader.
View 3 Replies
View Related
Nov 21, 2010
I'm using ubuntu 10.04 and I recently tried installing certain python libraries. The installation of pyXML failed because python.h wasn't present. I thought I could solve this problem by reinstalling python. So I did:
Code:
sudo apt-get remove python
Unexpectedly, this command caused all kinds of other things to be uninstalled (like gnome)
[code]...
View 6 Replies
View Related
Dec 26, 2010
Not sure exactly how to describe it. I'll try to get a video for reference. The log-in screen comes up, I type in my password, hit enter, and the screen goes black and the log-in screen comes back up. I'm currently using a BackTrack installation (it sucks) and I'd like to go back to an OS that connects to the internet automatically, instead of me having to redo everything from a terminal upon startup
View 1 Replies
View Related
Jun 28, 2011
I was building LTIB and encountered a few dependencies missing. so i installed them manually. These were the ones i installed.
gettext
freetype
glib2
[code]...
View 3 Replies
View Related
