Ubuntu Installation :: Nvidia 9300M GS - Purple Screen (loading Screen) With 4 Dots
Oct 25, 2010
I have been using ubuntu wel a long time now and I know my way around in linux but I recently updated my laptop from ubuntu 10.04 to ubuntu 10.10 all went fine until I had to restart my laptop. I got a purple screen (loading screen) with 4 dots and a oldskool like font which said: Ubuntu 10.10 Right after that the screen goes purple and its like the system halts I hear no login sound etc just a purple screen. So I did a clean install from the 10.10 live cd which booted perfectly fine and the system was also useable like before. But when I installed the system and rebooted it again no problems.
But when I tried to install the proprietary nvidia driver (the recommended one) I got the same problem again the purple screen. After searching a while on the internet I only found posts which had the problem with ATI cards but my laptop is fitted with a Nvidia Geforce 9300 M card. So I tried several things like removing the xorg.conf (read it somewhere) which ofcourse did not work, and booting in graphics fail safe mode which worked. So the point is in 10.04 and 9.10 I CAN use my video card drivers but not in 10.10 is there a solution to this problem? I am talking about the 32 bit version of ubuntu and here's my system hardware profile:
Intel core 2 duo t7350 @ 2,0 ghz / 3mb l2 cache
2 GB DDR3 ram
160 gb hdd
Nvidia 9300m gs
Chipset: I dont know sorry
Model: Samsung R710
View 2 Replies
ADVERTISEMENT
Aug 13, 2010
It is the same drive that I used to install ubuntu, but kubuntu isn't working!
View 3 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
Jan 12, 2011
i want to install ubuntu 10.10 but when i insert the cd into my laptop and boot from it,it get stuck on a purple screen saying "ubuntu10.10" with five dots underneath it
View 1 Replies
View Related
Jun 23, 2011
I have a rig with 4 graphics cards. When I installed Ubuntu, only 3 of them got detected, the 4th did not.Now, I've fixed that problem. However, when booting up Ubuntu, it stays on the purple blank screen for a while, then goes frozen on the logo with 5 red dots.I've tried re-configuring xorg with the command line, however I had no luck
View 4 Replies
View Related
Jun 29, 2010
When I try booting my computer under Ubuntu, it freezes whenever it gets to the part of the purple loading screen (with the Ubuntu logo and the red/white dots indicator). I won't load any further, but I can still turn it off by pressing the power button. Has someone else got this problem? Ubuntu was my main partition, and I don't have any practical way to make a hard install.
View 3 Replies
View Related
May 27, 2011
'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
View 4 Replies
View Related
Jul 21, 2011
I installed Ubuntu 11.04 today as the main OS on my laptop.I had deleted my XP partition, and repartitioned it according to a guide I had found. (http:url)......Basically it was setup like this: 500mb ext2 primary partition, has the grub folder, I believe this is either the '/' partition, or the '/boot' partition 2gb swap space logical partition
10gb ext4 logical partition -- this is either the '/' or the '/boot', it contains the 'bin,boot,cdrom,dev' etc folders 243gb (the rest of my hard drive, with the exception of a partition that contains documents and files from my XP OS, formatted to NTFS) ext4, this is the one that has all my desktop/documents/etc folders.After Ubuntu was done installing, I had some message pop up about installing an ATI proprietary driver for my ATI graphics card (an ATI Radeon HD 4330, I believe, I may have messed that number up). I installed it and rebooted, no problem.
Next, I had another update window pop up with 198 items checked and ready to download and install. I went through all of this, and rebooted, again, no problem.Next thing I did was install some apps that were essential for me to have to use for my work (an ide, chat programs, etc). No problem with any of that.Last thing to install was the OSE Virtualbox, and then I installed WindowsXP Pro and Windows Vista Business, then installed the guest addition addon for VB. This all worked without any issues whatsoever.
Time goes on, and I notice my computer is heating up much more than (seemingly) normal. I begin to wonder if its my graphics card. So I shut down the computer and let it cool down. Reboot, and no problem, still working fine.Then I opened a couple of apps and tried a simple game (can't remember the name) I believe it was a simple 3d topdown, as I wanted to test my graphics card. This is where things seemed to start to go wrong. My laptop began hanging, not even allowing me to access the terminal via ctrl+alt+f2. The screen flashed and I saw the blue/green/grey fuzz that I get when the graphics card is starting to heat up too much. Then everything hangs and I can't do anything at all, including move the mouse. I did a hard reboot (I believe this is what you call pulling the plug/pressing the power button, correct me if I'm wrong). I then rebooted, saw a chkdisk, then it booted seemingly normal, but it hung right after the purple screen after the grub screen.
This is pretty much where I'm at right now. I strongly suspect the fault is with the ATI drivers, but have been completely unsuccessful in my attempts to fix it. I've googled just about everything I could think of, along with searching these forums. I've tried just about everything listed in the forums, but to no avail.I've tried the commands that are supposed to purge the ati drivers, but all I get are errors that say they can't remove the 'virtual drivers'.
Right now I'm booting off a live cd, so I know the computer still works fine, just not my actual installed OS. I'd really like to get the issue resolved without having to reinstall, as it took quite awhile just to get it usable in the first place, but this has already taken so much time, I may just resort to that if we can't solve it any other way. Got too much work to catch up on as it is.As a re-instated note, perhaps if you have any tips, but not particularly about fixing the OS, my laptop (I'm strongly guessing my graphics card) is heating up much more than normal, compared to that when XP was installed. Is this more than likely just a driver issue, as is the rest of it? Also, I did have Compiz installed, though I didn't choose for it to be installed, I believe it came pre-installed. I've heard it could cause some issues, though I have no idea as to the validity or relation to this particular issue.
Edit:
I just remembered while searching for a solution, I found a post somewhere that said something about the information not being sent to the monitor from the graphics card properly, thus no desktop. I'm guessing that'd still fall under the driver issues, but again, I'm unsure. I would think that wouldn't be entirely true anyway, since I can still see my mouse fine, just no desktop, only a black screen.
View 1 Replies
View Related
Dec 26, 2010
Is there a known problem with the Lubuntu 10.10 image here? I have downloaded it to two different computers, then burned the images to two different blank CD's (different brands) and neither loads. Both only get as far as the Lubuntu menu, once ENTER is pressed at that point to load the LiveCD, a blank screen eventually appears with a flashing cursor at the upper left of the screen, that's it. They were both burned using the slowest burn speeds available.
View 9 Replies
View Related
Feb 19, 2009
Forgive me if this was already posted but I couldn't find it. I am attempting to install F10 on my Acer Aspier 8730-6031, but I have video drive compatibility issues with my 9300m. Does anyone know of any drivers for this card or any fixes?
View 2 Replies
View Related
Dec 8, 2010
i am fairly new to Ubuntu. i was using it fine for a month, but today, when i booted my computer up, it came up with a black screen instead of the normal purple ubuntu screen. the black screen had white text on it, and asked for my username and password. from there, it was a terminal prompt. i have been google searching for a while, and have tried typing "startx", "sudo apt-get install ubuntu-desktop", "sudo gdm", and i have also tryed uninstalling xorg, and reinstalling, and none of these things wanted to do anything for me.
View 4 Replies
View Related
Apr 30, 2010
I burned and checked the image, but cannot install or upgrade ( I DL both the full and alternate image) Hangs on the Ubuntu screen with the scrolling dots. After this, I tried mounting and running the install from the iso, but since all the files are either .inf or unknown, I don't know how. Next, I tried a trick from the ubuntu site using alt+F2 to run from the iso, and it seemed to work, but now it still tries to DL the updates from the internet instead of just getting them from the ISO. This also happens now if I try to upgrade from the update manager, it keeps asking for the install disk. Is there any way to just use the ISO as though it were a disk? I have been running 9.10 for months with no problems.
View 2 Replies
View Related
Dec 23, 2010
I recently received a HP Pavilion dv9000 that the previous owner swore had some issues with it. I'm not so sure it had issues, but that's another story. Anyways, I downloaded Unbuntu 10.10 and burned it to a disk. The first time I booted up the machine I told it I wanted to try Ubuntu. I then left the machine and came back in 20min or so and it looked like it had successfully booted. However I quickly realized the screen was frozen. So I turned off the machine and decided I'd try again a few days later. Today I booted up the machine and I get to a black screen with Ubuntu on it with five dots below the wording. It freezes on this screen. I've rebooted several times but I keep getting to the same screen before it freezes.
View 1 Replies
View Related
Jan 24, 2011
I have a pretty old acer lap top. I used to run xubuntu on it, then I formatted it and installed freeBSD just to check them out. I tried to install last version of xubuntu then, and I got a message that /dev/../loop0 couldn' d mount or sth then I learned about lubuntu and I tried to installed them but I tried both a dvd and a cd and on both cases after I select language and "install on this machine" I just see a screen with 4 red dots writing "Ubuntu 10.10" that stays like this forever.. and nothing happens. the same if I select to boot from the cd just to check the environment. I then tried a ubuntu-studio dvd I had handy just to see if this would work - and it started installing as expecting, I cancelled it after a while. how to get lubuntu running?
View 4 Replies
View Related
Feb 22, 2011
another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
View 9 Replies
View Related
May 1, 2010
I've installed almost every version of ubuntu so far and four different versions on this computer, and I've never had a problem with the installation cd. The install cd on this new version however gives me only a purple screen of death with a white line down the middle. What is going on? The ubuntu-10.04-desktop-i386.iso file's md5sum is fine. I've burned it successfully on two different discs and still I can't install it. I've got a Dell 6400 with an nvidia geForce 7300 video card.
View 9 Replies
View Related
May 5, 2010
My problem is with the new Ubuntu 10.04 Installer, and the Plymouth Bootloader.
I have installed Ubuntu plenty of times before on my hardware setup, so 10.04 shouldn't be significantly different, however I can't seem to get it to go past the purple screen with the red dots.
If i let it sit there for a while, then press an arrow key, it takes me to the text which is as follows:
Code:
(process:404) : GLib-WARNING **: getpwuid_r(): failed due to unknown user(0)
unable to open '/dev/mapper/nvidia_afgjfcea'
unable to open '/dev/sda'
unable to open '/dev/sdb'
[Code]....
View 9 Replies
View Related
Mar 21, 2010
Neomagic 256ZX(I think) video card, 256 MB RAM Well, after the upgrade went fine, I rebooted and was greeted by a purple 10.4 screen, after which I was greeted with a blank screen with 6 blinking dots. I don't know if this is a new video driver failure (its a pretty old laptop, theres no need for new drivers) or if its a grub problem. Since I can't get to a grub it goes BIOS>Purple 10.4>nothing and I don't get a terminal login, the laptop is now considered bricked. However I was okay with the install and was wondering if theres a way to fix it.
View 1 Replies
View Related
Sep 14, 2010
Trying to install Ubuntu 10.04 desktop (amd64) on this brand new system:
I connected the Dell ST2410 24" Full HD Widescreen LCD to the HDMI port on the ATI card and Windows 7 boots up just fine.
So then I put in the "ubuntu-10.04-desktop-amd64.iso" CD in drive and reboot the system. I see the Ubuntu logo with the dots for a while and then the LCD goes black. The LCD reports that there is no signal from the system. The power light in front of the LCD goes from white to amber. The keyboard stops responding.
I power off everything, remove the Ubuntu CD and reboot the system and it works fine again with Windows 7.
The CD has no problems. At boot time, I checked it for defects and it reports no errors. At boot time, I used this same CD to check the system for memory errors. No memory errors. I used the same CD to install Ubuntu on other systems and had no problems.
The 16X DVDRW Drive has no problems. In Windows 7 it can play CDs and DVDs.
View 5 Replies
View Related
Dec 16, 2010
Yesterday I booted into the Ubuntu 10.10 CD, and hit the Try Ubuntu button. Ubuntu booted fine from the CD, and after trying it for a few minutes, I decided to install it.
I already had (and still have) Windows 7 installed, so, using the Ubuntu Installer, I shrinked the C (system) partition of Windows by roughly 14 GBs. 10 of which used for Ubuntu itself, and the other 4 as Swap Area.
Installation went fine, and I was asked to reboot - and so I did. However, upon restarting, I was 'welcomed' by a stuck, purple splash screen. So I used Recovery Mode, and updated my Ubuntu. That didn't change anything. I rebooted, started Ubuntu without the "splash quiet" commands, and instead used the "nomodeset" command. I logged in my Ubuntu user, and ran the StartX command. It didn't work, and I was given a few errors, including "no screen found", "Fatal server error", and something along the lines of "no NVIDIA module found (...,0)".
So what's wrong with the NVIDIA driver, really?
View 2 Replies
View Related
May 7, 2011
I upgraded from 10.10 to 11.04 and now I have a blank purple screen. I have searched and went through some of the steps members have been giving, but haven't been able to fix the problem. I can get into the computer going through the grub menu, but when I restart I go through the same problem.
Here is the computer that I have: [URL]
View 9 Replies
View Related
May 11, 2011
If you had or have a black screen or purple screen problem in Natty, add support by subscribing to this Launch Pad Bug: Xorg's HAL causes Purple Screen or Black Screen on GDM startup. [URL]
Through helping people with these problems in the Ubuntu Support Forum (Installations and Upgrades) and through this sticky: [URL] this bug (above) seems to be where this problem is originating. It affects this problem with all video hardware types. As I said in this bug report: "Normal users should not have to be highly skilled "techies" to manually bypass a broken part of a system to make a released distribution work during an install or distribution upgrade"
View 1 Replies
View Related
Mar 17, 2011
I just started and very green, I got a old unit that has Linux instaled. I get home start it and I get a purple screen after gnu grub screen, I'm using a diferent mouse and monitor is all that changed from when I picked it up. I don't know were to start.
View 4 Replies
View Related
May 1, 2010
i feel like i should be on the payroll if I have to work so hard and long to get these things working. (ranting stopped, for now) I have ATI Mobility Radeon HD 4330 GPU in my Dell Zino system and finished the upgrade from 9.10 to 10.04 LTS and got the purple screen of death. tried the intel recommended fixes but got nothing. I cant even get into recovery mode.
View 3 Replies
View Related
May 31, 2010
Ubuntu and right now I am running it inside Windows. I burnt it onto a cd so I could install it onto my 2nd harddrive. I know the cd is fine. When I boot off the cd a purple screen loads up with some weird symbols at the bottom looks like a picture of a battery = and then a picture of a stick figure man. If I hit f6 I can get to the option screen. I've tried using noapci, nomodeset, disabling the framebuffer, and vga=normal. None of them work as soon as I hit enter to start installing Ubuntu it just sits there on the menu screen and never does anything.
View 5 Replies
View Related
Feb 1, 2011
I am having problems installing Ubuntu netbook 10.10 from a USB drive.
I have a Lenovo ideapad S10-3 with Win 7 Starter.
I have tried two different USB drives, one is unidentifiable, the other is a Kingston.
I have used Pendrive and Unetbootin on both.
I have tried formatting the drives to FAT32 from both the Pendrive option and from Win7's default formatting software.
I downloaded the iso from the Ubuntu website torrent, and I did an md5 check to make sure that the file matched up.
When I boot from USB, the purple screen comes up briefly, and after two seconds changes to a black, terminal screen on which a bunch of text scrolls and then it eventually freezes. When I click a button, the menus pop up, and when I click on either "install" or "run from usb drive," the same terminal thing happens. Someone recommended that I try installing from that screen after changing the f6 options to nomodeset, noapci (I think), and acpi=off. (I cannot remember the exact lettering, but they were options on that f6 menu.) None of these changed the result.
With the Kingston, the line that it freezes on in the terminal is:
[6.548159] USB Mass Storage support registered.
With both drives, when I use the Unetbootin install, the menu comes up, and when I click on either the 'run' or 'boot' options, the cursor in the bottom left of the screen keeps flashing but no progress. (No terminal-like screen with this one.) It is different with the other drive. How to proceed from here?
View 9 Replies
View Related
May 11, 2011
I use my computer on a TV using a DVI to HDMI cable using an i915. Its been solid every release until this one. I change channel and then return to Ubuntu I get no signal/ Purple screen. I have tried turning off sync to vblank in compiz and running Gnome Desktop with no effects both seem to make no difference.
View 1 Replies
View Related
May 20, 2011
I have a duel booting system, Ubuntu 11.04 and Windows 7. I have installed burg. I have ended up with text when booting ubuntu. When I changed the splash it only show on shut down. How can i make it show on boot?
View 3 Replies
View Related
Jun 12, 2010
I have a problem, so I boot in recovery mode. The Recovery Mode menu comes up, but when I press a cursor key, the purple Ubuntu screen comes up. I cannot get to the menu items that I need!
The recovery mode is supposed to provide a failsafe text-only environment.
Does anyone know what app puts up the purple screen?
I would really like to remove it. I tried to install xdm, which I prefer, but keep running into the purple screen. - With XDM installed, the purple screen comes up and blocks you from seeing anything. Fortunately, remote login by RDP still works. - If you switch console (CTRL+ALT+Fn) back and forth a few times, the purple screen appears again. You have to go to a new console (F8 or even F9 instead of F7) and begin a new Gnome session. Eventually you run out of function keys...
Perhaps I'm using the wrong distribution. Ubuntu is friendly, but you pretty much have to use it exactly as it installs. Can someone recommend a distribution that puts more emphasis on stability?
View 1 Replies
View Related
Jul 24, 2010
I just got the new kernel update (2.6.32-24-generic, according to "uname -r"), and I went to restart my computer as the system requested. When I selected the new kernel from the boot menu, the Ubuntu splash screen came up, and then it did this subtle alternating shades of purple horizontal line thing. Then a vertical line appeared towards the right of the screen, and then everything faded into this cloudy, bright white splotchy...thing.
The keyboard was still responsive, and hitting ctrl+alt+delete restarted the machine, at which point I tried to replicate the problem, but everything loaded normally this time. My questions are: What the heck happened? Why? Is it dangerous? Why or why not? My machine is a Dell Inspiron 1501, 2 GB RAM, 120 GB hard drive, ATI integrated graphics, AMD 64 Anthlon X2 processor. I'm dual booting with Windows 7 as I learn Linux.
View 2 Replies
View Related
