Ubuntu Installation :: 10.10 Image Not Loading - Flash Screen On Blank Screen
Dec 26, 2010
Is there a known problem with the Lubuntu 10.10 image here? I have downloaded it to two different computers, then burned the images to two different blank CD's (different brands) and neither loads. Both only get as far as the Lubuntu menu, once ENTER is pressed at that point to load the LiveCD, a blank screen eventually appears with a flashing cursor at the upper left of the screen, that's it. They were both burned using the slowest burn speeds available.
View 9 Replies
ADVERTISEMENT
Apr 15, 2011
like any other Linux newb, I came to Ubuntu because my Windows crashed one time too many. And I chose Ubuntu because "it just works". But these past few days that hasn't been true. I'm posting this from a netbook with Ubuntu, and am having no problems whatsoever, but normally I use an Acer Aspire 5920G laptop. I'll include the specs as written on the sticker:
* Intel Core 2 Duo processor T5250 (1.5GHz etc)
* Up to 1024 MB Nvidia Geforce 8600M GS Turbocache
* 2 GB DDR2
Let me know if you need more details, and I'll add them later. Now, what happened was I clicked "hibernate" while leaving Firefox open. (I've done this hundreds of times, no problem) And when I went to turn it back on the next day there were weird graphical glitches in the loading screen, and it booted to the "tty1" prompt screen. I did a lot of googling and found quite a few posts about it, but the solutions either didn't work, or I didn't understand them. After trying several different suggestions from this forum and others, I managed to delete the graphics drivers. That enabled me to boot in low graphics mode, and naturally, I tried a whole bunch of things to make it work properly again. That only made it worse. Now it went straight from the loading screen to just blanking out and turning the display off. So, I tried new things. Over and over. The weird thing is even when I disconnected my harddrive and ran from a Live USB, the problem persisted. Could there be an issue with the graphics card itself? Anyway, after reconnecting the harddrive I tried to boot again. And it suddenly worked. Even HDMI to my bigger screen worked.
[Code]...
View 1 Replies
View Related
Jun 30, 2010
I'm attempting to install Ubuntu Netbook remix (however I have tried others) on a 32 bit laptop but after it goes through that ubuntu loading thing, it goes blank after that and I've determined that it's not the cd and it's something to do with the hardware after looking at other posts with similar issues. I do not have an operating system on this laptop.
View 3 Replies
View Related
Sep 5, 2010
ive downloaded the Ubuntu CD from the official website and burned it twice, once one a dvd and the other on a normal 700MB CD-RW.in both, the screen went blank after the loading part before the main menu (installation, try it blah blah..)what should i do?btw i use a windows XP and here is my hardware details...sapphire hd 5770 1gb, 4 gb of ram,Intel Core i5- P55 .5 ghz, i think that its enough for the minimum of the ubuntu isnt it?
View 4 Replies
View Related
Jan 21, 2011
Try to load my system today and nothing come up, only the terminal window. Whatever I type in is working, like now I type in the terminal firefox and it is how I ended up here. Try to type thunderbird in the terminal and my mail server started no problem. But nothing on my screen, don't no where to go from here.
View 9 Replies
View Related
Apr 30, 2010
I have been trying to get the live image of 10.4 to work on my machine, however I keep running into video corruption issues. When I try to run the live image, from a CD or USB stick, it shows the loading screen fine and the bars underneath the logo move and look fine. Then it seems as though it has loaded and goes to desktop, but it only shows a corrupted image of the loading screen. After a few seconds there seems to be some sort of intro sound playing, however it is very scratchy/corrupted. I'm not sure what the issue is and I have tried 32 and 64 bit versions.
I have also tried installing via Wubi and get the same results. I'm really at a loss of how to correct the problem. Not sure if it is a video driver issue, or some other issue. I also can't seem to find a safe graphics mode to try and work around the problem.
My specs are
DFI Lanparty Expert
nvidia 7800 gt
2gb ram
x-fi sound card
View 1 Replies
View Related
May 9, 2010
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies
View Related
Oct 10, 2010
i have just upgraded to 10.10 from 10.04. i have an acer netbook (d250 one). i had boot loading screen problems with 10.04 too. i hoped that this issue will be fixed with the upgrade but not. after the grub menu, a black screen appers until the password prompt screen. there is no purple loading screen, just a black screen. is it a plymouth prob? also i realised that when i playing videos in videos the sound crashes a bit. i'm using google chromium. but my main problem is the booting one not the flashplugin. the new 'ubuntu' font is awesome. i <3 it.
View 9 Replies
View Related
Jan 22, 2010
I am new to ubuntu and I would really like to try it out, however I cant do the demo it freezes, I cant boot it either. I got rid of the quiet splash and watched it load. The last thing I saw before it went to just a blank screen was the ubuntu logo and it said loading apparmor then ok, went back to the previous command line screen and said done. Then it was just blank. No mouse, no blinking cursor, nothing.
View 2 Replies
View Related
Apr 9, 2009
I'm trying to build a dual boot ubuntu 8.10 and fedora 10.I have ubuntu sucessfully installed. with a free partition ready for fedora.I cant seem to get fedora past the beginning of the install. Once it says its loading anaconda, my screen either goes blank, or the anaconda fails and the install exits, telling me to reboot my system.I have downloaded the DVD twice. once from the website, and i think when I bruned it it didn't burn right, I then downloaded it from torrent just to be safe and reburned at the slowest speed. It passes the media test.
I have been reading around it may be cause of my video card?My computer is the following.AMD Athlon +2400 XPXFX Nvidia Geforce 6800 GT or something close.80 gig hard drive1.5 gigs of DDR ram.MSI Motherboard not sure of model off top of my head.I really wanna get this dual boot working, As I feel fedora may have advantages over ubuntu. I was going to try to get ahold of another video card, and maybe try that. What do you think I should do
View 14 Replies
View Related
May 14, 2010
i have installed ubuntu 10.4 on my compaq 615 system successfully but when i restart the system it freezes, jus giving me a blank screen... i already have windows 7 home premium on the system then i partitioned sum space for the ubuntu but it still dosent work...
View 4 Replies
View Related
Oct 25, 2010
I have been using ubuntu wel a long time now and I know my way around in linux but I recently updated my laptop from ubuntu 10.04 to ubuntu 10.10 all went fine until I had to restart my laptop. I got a purple screen (loading screen) with 4 dots and a oldskool like font which said: Ubuntu 10.10 Right after that the screen goes purple and its like the system halts I hear no login sound etc just a purple screen. So I did a clean install from the 10.10 live cd which booted perfectly fine and the system was also useable like before. But when I installed the system and rebooted it again no problems.
But when I tried to install the proprietary nvidia driver (the recommended one) I got the same problem again the purple screen. After searching a while on the internet I only found posts which had the problem with ATI cards but my laptop is fitted with a Nvidia Geforce 9300 M card. So I tried several things like removing the xorg.conf (read it somewhere) which ofcourse did not work, and booting in graphics fail safe mode which worked. So the point is in 10.04 and 9.10 I CAN use my video card drivers but not in 10.10 is there a solution to this problem? I am talking about the 32 bit version of ubuntu and here's my system hardware profile:
Intel core 2 duo t7350 @ 2,0 ghz / 3mb l2 cache
2 GB DDR3 ram
160 gb hdd
Nvidia 9300m gs
Chipset: I dont know sorry
Model: Samsung R710
View 2 Replies
View Related
Dec 22, 2010
I have been running 10.04 quite successfully, when I upgraded to 10.10, I have a problem with the newer kernels. If I let it boot into the latest one 2.6.35-23, I get the Ubuntu 10.10 splash screen for a second then a blank screen, same with 2.6.35-22. I have to run with 32-25 to get it to load the gui.
I have an AMD Sempron 2800, 1.6GHz pc, but I'm not sure if it's running 64bit.
View 7 Replies
View Related
May 4, 2011
I've been running Ubuntu 10.10 very smoothly for a while now. Decided to upgrade to 11.04 - managed to corrupt the hard disk the first time by letting the laptop hibernate part of the way through but reinstalled from a live CD of 11.04 and it's now working except for this issue.
If I shut the screen on my laptop (or press the screen off button) either the screen won't come back on or it will but frozen (I can move the mouse but not click on anything etc.) In this state music continues to play (from spotify under wine) and if I press my hibernate shortcut (power button) the computer hibernates, only to wake into the same situation. I've got a Dell Latitude D520, upgraded to a bigger hard disk and more ram - the ubuntu partition has 50gb. Windows is working fine.
Edit: I noticed a sticky thread which includes something about a blank screen but I think this is a different issue?
View 2 Replies
View Related
Feb 22, 2011
another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
View 9 Replies
View Related
Apr 25, 2011
I got a new Lenovo S20 and I am having trouble loading Linux. I've loaded these variants with no success:
Ubuntu desktop
Ubuntu server
Linux Mint
CentOS
vmWare esxi
The live CD's run, and very nicely at that. But once I install to the workstation they won't boot. I just get a blank screen. I've tried different bootloaders.. I've toyed with different BIOS settings.. I've even installed to different drives (a hard disk and an SSD). Maybe a hint: BSD installs and runs with no problem at all. I have PC-BSD running at the moment. It's nice, maybe I'll keep it. But I'd rather have Linux.
My amateur computer science mind sees this as not a boot loader issue (recovery mode shows Linux seems to be loading to a point.. but I can't see the script line just before the lockup) not graphics related; UB Server and vmWare are text-only and they won't load either probably not a bios issue (liveCDs run and other people run Linux on S20s) not hardware (Windows and BSD run on this one)
View 1 Replies
View Related
Dec 10, 2010
I've recently begun to have the problem of whenever a flash video in Firefox 4.0 goes in full screen mode, the screen goes black and my laptop is unresponsive. However, the video's sound will keep playing.
View 2 Replies
View Related
Aug 3, 2011
really wish to customize my GDM for ubuntu 11.4 but failed to do so.....therefore i decided to use alt. such as SLiM.....I could install it properly in virtualbox but when i went to do it on my real ubuntu 11.4 ......the screen stops at plymouth theme or goes blank after loading plymouth theme......then i read further more blogs and made changes and now even if i configure SLim the GDM starts no matter what i do .........
PS : I am new to ubuntu and dont have any knowledge about scripting programming and stuff....
View 5 Replies
View Related
Feb 9, 2010
[URL] and then take vid and open that in whole screen. Since is it this machine why I got blank if I am try to expand it to fill screen.
View 2 Replies
View Related
Jul 8, 2011
I have installed Ubuntu 11.04 along side windows 7 ultimate. But the problem is as soon as I switch on my computer. There is only a blank screen with my TFT screen displaying a msg "Out of Range"
Then suddenly Ubuntu loads without showing any option to load windows 7.
View 2 Replies
View Related
Jan 1, 2011
I've made a Live CD of version 10.04 on a machine running 10.04 (amd64). The disk boots fine on a 2nd machine but does not boot on the machine that created it. The CD/DVD is new and works for other things so I don't think it is this. The Live CD gets to the ISOLINUX screen but instead of "Loading" the screen goes blank and the system shuts down. I've tried everything I can think of (the disk works fine on another machine).
View 3 Replies
View Related
Jan 26, 2011
The day started as usual until I got the very bright idea to install Ubuntu. A new OS along side W7, that sounded great. I checked some guides on the Internet, it was all very straight forward. Install it and Grub will show you the OS:es when you boot up. I installed Ubuntu, rebooted. After the BIOS messages the screen goes blank and my screen on-button begins to blink, as if trying to find a signal, I press enter, it reboots instantly. After BIOS messages I get to a screen that says "GRUB error: uknown filesystem grub rescue>"
I've looked through everything here and nothing works. I've tried to fix the mbr-thingy using Windows Repair and even though it says "one partition was updated with new boot-thingy" when I reboot, I get into that very same grub rescue. I think my setup has something to do with it. I run RAID0 (2x360Gb hard drives), first having C: at 50Gb and then the rest as F: for programs and such. What I did was that I shrunk the F: part and then used that as partition for Ubuntu. Also please have a look at these screenshots, my partitiontables and such seems completely wacky to the raid: Where should the boot-loader go? I'm very, very new at this. I've had Ubuntu Netbook remix on my netbook for a time but still treat me as an utter beginner.
View 4 Replies
View Related
Oct 9, 2010
I'm trying to test out using xubuntu 10.04 on my one computer and keep getting a black/blank screen after selecting the 'try' menu option.Is there a way to fix this?I have tried some of settings via F6 with no luck.
FYI -The CD works fine as I have tested it on other machines.The version I am trying is xubuntu x86 (although I have tried ubuntu 10.04 x86 with similar results).I can Alt+Ctrl+F1 fine and get to the cmd prompt
View 1 Replies
View Related
Jan 14, 2011
I fixed this issue on 10.04, but just recently (1 hour ago) upgraded to 10.10 and am having the same issue. Machine boots fine, but the screen is blank for most of the boot, and plymouth is up for about a half second before I get to the login screen.I've tried searching the threads, but for the life of me I can't find the solution and can't remember what I did to fix it on Lucid.
View 4 Replies
View Related
Jan 11, 2011
i have just put a Geforce 7300 GT graphic card into my machine the problem is the max resolution I can get is 1024x768 at 60 hz the screen is a benq fp71g+. also the screen goes blank when i click on the display icon in system settings. i know that the screen can be run at 1280x1024 so I don?t know where the problem is.
View 3 Replies
View Related
Aug 4, 2010
Unfortunately my experience in the Unix* based world up to this point has only been using web servers and administrating them, no GUI experience of any kind so I am completely unfamiliar with the setup and entire usage of Xorg or any other Window manager at this point. The issue I am having is with the screen resolutions I am being allowed to chose for my Dell Studio 1535 running Fedora Core 13 and the KDE 4 desktop GUI, thus my issue since I am not really familiar with how to run a Unix* based GUI in the first place.
The basic information, if there is more needed just advise what and what command gathers that info (or what conf/log I should look into in order to find it). Laptop is a Dell Studio 1535 Video is the Mobile Intel GMA X3100 ATI Radeon HD 3200 Graphics. LCD interface is the LVDS.
So far it seems to give me modes for 1024x768 and on down, nothing above this. I believe I am supposed to use the radeon driver being that is the type of card it is but every time I change the xorg.conf file to use this instead of vesa the system wont get past the loading screen anymore upon reboot and nor can I seem to find a way to bring up a command line so I can hit up the Xorg.0.log to see what is wrong or change the xorg.conf file back to the original driver it had listed.
I am going to assume this is a missing driver or something else it hangs on but without being able to get access back to the system and having to rebuild it again (re-install via live CD) I am basically out of luck at this time. Sorry for the rather poor post but I do hope to receive some basic directions on where to go from here with this issue
View 12 Replies
View Related
May 20, 2010
I am very happy with Ubuntu 10.04 that I downloaded, burnt to CD and installed (I am a newbie to Linux), but I am finding a little problem on an old Sony lap-top, with a rather old-fashioned almost square screen.The top bar of any screen image is just off the top, and I can only see a quarter of it, which makes using the max/min and cancel buttons a bit hard to use. I know I can resize the screen, but it goes back to the original next time it is used. Is there a permanent fix?
View 1 Replies
View Related
Jul 19, 2010
So finally decided to upgrade the desktop (dual-booting with Windows 7 for games) from 9.10 (fresh install awhile ago, never did anything with it) to 10.04 - upgrade went fine, reboot, watch grub go by, and voila. Blank screen.
Things I tried in grub:
add 'xforcevesa'
add 'xforcevesa' & remove 'quiet splash'
add 'nomodeset' & remove 'quiet splash'
add 'nomodeset xforcevesa' & remove 'quiet splash'
[Code]...
I was hoping to test out Windows 7 in a VM, see how far I could get for GPU acceleration there - I'd much rather not run Windows on the bare iron for that machine, but if I can't get this fixed I have no option :-/
View 4 Replies
View Related
Feb 1, 2010
I'm installing Koala here on a 250gb Sata drive. I am looking to dual boot with Win7. I've got a 80gb Win7 partition and the rest is unallocated so I can install Ubuntu on to it. If I try to install, I get to the manual partition screen and it's blank. From what I can tell, Ubuntu isn't recognizing my hard drive at all. When I boot into the liveCD and run gparted, it says no devices found. Also when I boot gparted from a cd I get the same thing. BIOS sees the drive fine and the drive boots into Windows fine.
When I run "sudo fdisk -l" I get nothing. I've tried several of the flags including all-generic-ide. Also tried removing dmraid.
View 9 Replies
View Related
Feb 27, 2010
I recently got a new laptop and am trying to install Ubuntu 9.10 on it. I have installed it on my two other computers without any problems, but there seems to be a hitch with my new one. So I boot up using the live CD and then am presented with the option to test Ubuntu or install it. If I choose either of these the screen just goes blank. If I go with the first option of testing Ubuntu before installing, I can hear the intro drumbeats but the screen is still blank.
I have searched in some forums and tried some people's advice, like pressing Ctrl+Alt+- or trl+Alt+Backspace to change the resolution and restart X windows, respectivley. But it doesn't seem to work.
I'll list my laptops specs just in case my problem has anything to do with them:
MSi
Windows 7 Home Premium 32 bit
Intel Core i3 M 330 2.13GHz
4GB DDR3 RAM
Intel Graphics Media Accelerator HD
View 9 Replies
View Related
