Ubuntu :: USB Install Not Working - Getting "stuck" At The Loading Section
Dec 25, 2010
My live USB (persistent 3GB; total space 4GB) is getting "stuck" at the "loading section". It has never done this before. The "loading section" is where it says Ubuntu and there are 4 or 5 "dots" underneath. It just keeps going from white across to red/orange/whatever. I left it for hours (not sure exactly how long) and it was still stuck at that sequence. If you could help me, that would be great. It is Ubuntu 10.04. I do not want to format & reinstall everything because i got all my settings saved on there with all my programs and settings saved. Plus 4-6 hours of updates (bad internet connection). I don't remember changing anything before I shut down. Approximate start-up time is 2 min. with persistence and 30 seconds without (before i did the persistence option i did regular). Approximate shut down time is 1 minute with persistence and 5 seconds without. When I downloaded the Persistence Ubuntu .iso and everything else, I formatted it. I am running everything on a netbook, Asus EEE PC 1005 HAB if it helps. I have Windows 7 Starter installed, too. I am using it right now and Win 7 Starter has not been affected.
You maybe know that VirtualBox has an "immutable" feature for HDD images. I.e. setup the system, if the stuff is in place, you can set the image to IMMUTABLE to prevent any changes to the image. Differences are written to a separated image. So on the next boot you'll see that all the (unintended) changes are gone and the "old" system is up & running again. I run an old SuSE 10.3 on a write-protected SD-IDE-Adapter. Changing and playing with RPMs is a mess due to around 50 changes I had to do to make that work. Is there any option to mount an SD-card as RO and having all the changes written to e.g. /dev/sda3? To make it clear: I thought about something like a RAID-X system, but could not find any description on how to setup a raidtab.
I'm using ubuntu 9. For some weird reason, sometimes when i log in only the ubuntu logo shows up. It says "Grub loading" and then the logo appears, but the harddrive isn't accessed. After about 2 minutes, the logo disappears and the screen goes blank. I have to shut down the computer manually. The weird thing is, it only happens every so often..about every other boot up.
I simply installed 5 or 6 various packages and shutdown the laptop, later I opened it and turned it on GRUB came up as usual showing the usual options, I selected the option I always pick and Ubuntu came up as usual with the progress bar of 5 or 6 dots that show the typical progress bar but it stays like this forever. I tested it for up to 3 hours it didn't budge.
I tried selecting the recovery option from the GRUB menu and it appears to load normally with a bunch of console output but then halts with the last message displaying:
Code: cloud-init start-local running Wed, 05 Jan 2011 20:43:44 -0600. up 14.26 seconds no instance data found in start local init: cloud-init-local main process (357) terminated with status 1
But before the message there was a lot of warnings that appeared to trail off as there were so many, here is an example of one of them as they all appear to be the same just different rule numbers, this is also the last one before the error:
Code: udevd[353]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/99-sbig.rules:59
I installed KDE but decided to remove it after a while as I wasn't using it and its application were redundant on my Gnome desktop. I followed Psychocats' guide for "pure Ubuntu" but after rebooting, Ubuntu just hangs on the loading screen (or during 'checking battery state'). I tried booting in recovery mode but I'm unable to navigate the menu: when I press a direction key it alternates between the menu and the Ubuntu loading screen. Several other keys do the same thing, while the rest do nothing.
I'm running windows 7/Ubuntu 11. When I attempt to load into my ubuntu partition, I hear the logging in sequence, but it stays in the loading screen, and I can't do anything. I've found I can get it to log in every fifth time or so, but mostly nothing.
I'm stuck in Memtest86, everytime i boot it gives me an option to go into BIOS, and then it says "Loading GRUB." After that it automaticly goes into memtest, and I've let it finish numerous times without giving me errors. I've installed Linux Mint 8 via Unetbootin, I have a nearly fresh install of windows 7 on my laptop.
I've just installed Debian 6.0.1a on a HP Proliant ML115, the install seemed to go ok. As it began to start up it 'Grub Bootloader' loaded then on the screen after the bootup froze at 'Loading initial ramdisk'
it stuck after loading. should got login window. instead it show me a blank page and a blinking courser i can only press ctrl+alt+del it will reboot my laptop n stuck after the loading process
I upgraded to fc13 from fc12 recently. After the upgrade the virtual machine boot is stuck in grub loading stage 2. I have attached a screen shot of the picture for reference.
I have just installed Fedora 15 xfce on my desktop. When I 1st start my computer my RaLink RT2870 works but after a while it disconnects and won't start again till I restart.
I can't see any pattern I am doing to make it stop. I been doing various tasks when it stopped working. I don't what command prompt or configuration file to look for or what to configure in the file.
So I managed to install Debian Jessie on a MSI G70 2PE Apache Pro that came with Windows 8.
First I partitioned some space on the laptop. Then I put on the net install cd for Debian and installed it on UEFI mode. It installed correctly.
Now I'm on Grub and when Debian tries to boot it gets stuck on "Loading initial ramdisk". The cursor under it doesn't even blink. The only way to get out of there is by Ctrl-Alt-Delete. Secure Boot is turned off. Fast boot is also off. If I try to boot on recovery mode gets stuck all the same.
The options on my grub are
Debian GNU/Linux Advanced options for Debian GNU/Linux Windows Boot Manager (UEFI on /dev/sda2) System Setup.
If I choose the Windows option, Windows boots, no problem.
If I choose the edit option for the Debian entry this is what it shows
Code: Select allload_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt6' if [ x$feature_platform_search_hint = xy ]; then
[Code] ....
What is happening and what should I try to make this work? Could it be a graphics card issue since this computer has a Nvidia Gpu?
Naturally a Windows user, because all of my computers were with pre-installed Windows and I was young.. and I get used to it..In the time of.. growing up I became programmer and learnt how bad is actually Windows coded. Not only that.. Linux has better support for developers.So.. I was Windows user till yesterday. I finally decided to work on Installing Linux or more specifically - Debian.I love everything part of the GNU - GIMP, GTK+, Gedit, GCC...
Well I can't use my PC, both of my operation systems are non-functional.Windows get stuck (which is something completely typical for Microsoft stuff) on Windows logo screen, or safe mode loading files..Debian installation is messy.Firstly I installed Debian 6.0 on a Virtual DVD Disc mounted. I followed the installation process strictly and move forward to Debian startup.It asked me for account. root as "username" and the password as "password" didn't work so I logged in as "localhost" normal user.
However.. I started to realize that I actually also had to install the Graphical Environment in order to have Debian with the desired GNOME Desktop.. I went to aptitude to install the Graphic Environment Package but it said that I have no root rights.. I tried to log-in again, using the correct details but failed.I tried to get in, using the sudo command, but the sudo command also didn't work. Of course.. since I can't install packages, I can't either install sudo."su -" or "su" also prompt me to select a password which I apparently have no clue of.
Then I went to Debian Recovery, because there I was logged as root. It also pointed out that "Root Account is locked". I went to install packages finally.. But when the installation started to proceed It asked me for disk insertion in a specific folder?There I got lost completely.
I been running both OS's for a few months now with no major problems besides wireless internet issues. Today, however, as I go to boot my laptop up, the Dell logo loads with the F2 and F12 boot and setup options which both work. Directly after that though I get the message "GRUB loading. Symbol '?' not found. Aborted. Press any key to Exit." then it repeats when I push a key, and then it tells me to press F1 to retry, F2 to go to setup, or F5 to run diagnostics. It passes all the tests in diagnostics. I've tried booting off of the ubuntu cd I used to load it initially with no luck. So I'm stuck at either that error message or in setup but I can't go any further, and it does not change anything when I tried to boot from the cd.
When I open some folders with Thunar, even if they don't have more than a few files in them, it takes a very long time to show the contents. Sometimes up to two minutes. It happens almost always if the folder is on my ntfs partition, but sometimes even when it's at /home.I used to run Ubuntu Hardy, and nothing like this ever happened with Nautilus.
I installed Ubuntu 11.04 (dual-boot with Win 7) and at first the bootloader was working fine; I even installed BURG (although I installed it on hd0 because I don't know how to find out where the MBR is installed...) but it worked fine when I restarted my computer several times. However, when I booted into Windows 7 and then restarted for the first time since installing BURG, I am stuck with the "GRUB loading" screen at startup, and can't get into any OS. I will try using the Live CD, but I'm wondering if the problem was because I installed BURG in the wrong drive? How do I figure out where the MBR is, and how do I fix this with the Live CD?
Trying to add a section in grub to boot a Ubuntu 10.10 from a partition, and can enter all the info OK, but it won't save it. It has an issue with the kernel and ram files not being where configured, but I tell it to save them anyway. When I go back in the section hasn't been saved...??
So I have 2 ide hdds but whenever they are both connected, grub gets stuck at GRUB loading stage 1.5. how can I resolve this problem? both are Maxtors with ext4 fs. primary is 20 gb and secondary 80 gb. Jumpers are set to cable select. Boot order in bios is correct. (primary first, secondary isn't in the list at all)
while trying to install debian amd64 KDE, in the Detect Disks section, the process stops at: No disk drive was detected. If you know the name of the driver needed by your disk drive, you can select it from the list.
Driver needed for your disk drive: and gives a long list of drivers. my hard drives are Crucial C300 128GB.
i have no idea which driver on the list to pick so i can continue with install.
I am using Fedora 13 x86_64 on my notebook.I have been using this for quite sometime now. I have a problem with the Gnome desktop. Here is what happenedI am using gnome with a single panel on the top. I changed the properties of the panel, made it transparent and then changed its position to the bottom. As soon as i did this, my desktop was not responding. I can move the mouse pointer, but the icons and menus and everything else became inactive. Within a minute the music playing in the background stopped working. None of the keyboard shortcuts are working. I waited for sometime but nothing happened, so I restarted the system.
Once I login after restart, the same problem is repeating, nothing loads up. I can just see the default background and the mouse pointer rotating as it does when some process is going on. But nothing loads up even after waiting for 15mins. Right now I am using Xfce which is working perfectly fine. Can someone help me with this.??---------- Post added at 04:01 PM GMT ---------- Previous post was at 11:13 AM GMT --------UPDATEI tried fixing it by uninstalling the gnome desktop and reinstalling it.I did the following command in terminal > yum remove gnome-desktopand it removed several dependancies too. I restarted the system and not even the loginscreen is showing up now.I am trying to install gnome from my fedora live CD. But I cannot figure out how.
i am sort of newbie to linux,i recently installed opensuse 11.2. i also installed nvidia card via 1 click install..
after install compositing didnt work,it said "someother program is blocking it ,type alt ctrl f12 to enable" after i hit that,my screen was stuck at blinking cursor,
so rebooted went to init 3, typed sax2 ,it showed me the options ,it passed the test screen,but after reboot didnt work.rebooted and hit sax2 -r -m 0=nvidia,again showed me option ,but didnt work.
everytime i login i see nvidia logo flashing up,but after login compostiting is still not enabled ,i have no idea what is wrong help please..
my other option is to type nvidia-xconfig to my config, nvidia 6150 card,opensuse 11.2 32 bit,amd turion,
my xorg.conf
Code: # /.../ # SaX generated X11 config file # Created on: 2010-01-24T16:06:50+0530. # # Version: 8.1 code....
when i turn on my computer i get a message saying grub loading...I wait around 20 minutes and still it gives me the same message. There is no error message. i am using a live cd right now.
My children use the Webkinz web site for fun and games. The site works with other LINUX OS (Ubuntu) , but I can not get it working with Fedora 12 or 13, 64 bit. I have installed flash from the [URL] Fedora wiki and flash works (I have tried both 32 and 64 bit versions). The webkinz site loads, but none of the buttons or games work (Try using the log in button, a new window should open asking for user name and password).
I seem to be stuck on an loading screen of sorts after booting Ubuntu 10.04 from CD (the screen which shows the Ubuntu logo and 5 red/white blinking dots below). Boot options tried were: live, live-powerpc and check-powerpc (which showed no errors in the files)
Stuck in tty after installing a Nvidia driver. I've gone through all of the steps in [URL] including the last problem where it temporarily freezes on the load screen. However there wasn't any documentation after that point. Notes for readers:Pressing Cntrl Alt F7 just sticks me to a stuck screen and not the GUI.
In the process of installing 11.2 over 10.2 everything goes fine until I reach a login screen. There I provide my previously supplied username and password and the result is logon failed. I have tried the install several times. The result is always the same.Login also does not work from console. Some surfing has provided the suggestion that the old Grub may still exist on the machine. If so, how do I get rid of it?
I cant seem to get Opensuse 11.4 to install I am stuck using a USB drive but using the imagewriter program that Suse provides to do a usb installation. Everytime I try to install i get LOGICAL UNIT NOT READY, CAUSE NOT REPORTABLE and some I/O error also if i DO the Check Disk thing its always perfect. Not sure it thats because im using usb.. idk.
I am trying to install Ubuntu 9.10 Server edition and I am getting stuck at the language screen... Yep the language screen that comes up as soon as you boot off the CD I have not gotten very far and I am already hitting problems... I am using a USB keyboard but it is working in the bios I don't know if this could be the problem?
I am trying to turn an old HP Pavillion 6630 desktop into a home server, and due to my own relative inexperience using linux I decided on a ubuntu server. However, when I get to the partitioner it shows me an error screen: [!!] Partition disks<Go Back> <Continue>I can only choose to go back or continue, and no matter which one i press it goes to a non-responsive blue screen. A slightly worse version of the BSoD if you will. I assumed this was a hardware problem initially, however the hard drive boots fine into windows still, and it still might be a hardware issue, I would just like some other input on what the problem might be.
