another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
View 9 RepliesI installed Vista on my Acer 64-bit laptop first, then installed Ubuntu 9.10 in a dual-boot configuration. And when I start up my computer, Windows Vista is an option in the Grub menu. But when I use the grub loader to load Vista all I see is a black screen, with a flashing underscore character (it looks a lot like a terminal screen, waiting for input). The screen just stays like this, too - I timed it once, and 13 minutes later it was the same.
View 9 Replies View RelatedI have installed Debian a few times now (and other distro's), so I'm fairly used to installing linux. I'm not used to installing it on Apple hardware (back in 2009 on my laptop I had some issues that were solved rather quickly, but that's about it). Now I'm installing Debian Squeeze on a new (well, bought today, but it is the previous model: iMac 11,2) desktop iMac.
Installing goes well (resizing partition, rEFIt, booting Debian 6.0.1a netinstall CD, installing packages etc.) I followed a tutorial [URL] to install grub explicitly with force after installing and running gptsync. Everything went according to the tutorial and I rebooted to be welcomed by rEFIt and then grub: perfect!
BUT when I chose Debian in the grub-selection list, I only see a few lines of starting the kernel, and then my screen goes all black. A few seconds later I hear a sound, and iirc it's the sound of gdm prompting to select a user. I cannot switch to a TTY and I have to use the power-button to shut the system down.
I have just installed Debian Wheezy on an E6XX Intel platform and after loading ramdisk, the screen goes black and I cannot use the system.
*) In the beginning, I tried to pass "nomodeset" in Grub, but after loading ramdisk, it tries to change screen's resolution and it goes blank.
*) gma500 output in dmesg can be seen in [1] at the bottom of this page.
*) I tried passing "GRUB_GFXMODE=640x480
GRUB_GFXPAYLOAD_LINUX=640x480" + update-grub, but it keeps failing.
*) I examined EDI's monitor output through "sudo get-edid |sudo parse-edid" (see [2] below), it seems that it is not possible to get the EDID information from the screen correctly. However, I am using this screen with xrandr with Debian Squeeze and I have no problems.
>>>>>>>>>>>>>>>>> [1] dmesg about "gma500"
[ 10.164297] gma500 0000:00:02.0: setting latency timer to 64
[ 10.164325] gma500 0000:00:02.0: Enabling MSI failed!
[ 10.164923] [drm] internal display is MIPI display
[ 10.167632] gma500 0000:00:02.0: VBT signature missing
[ 10.167828] Stolen memory information
[ 10.167840] base in RAM: 0x3f800000
[Code] ....
The EDID data should not be trusted as the VBE call failed
Error: output block unchanged
parse-edid: IO error reading EDID
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies View RelatedI installed Ubuntu 11.04 today as the main OS on my laptop.I had deleted my XP partition, and repartitioned it according to a guide I had found. (http:url)......Basically it was setup like this: 500mb ext2 primary partition, has the grub folder, I believe this is either the '/' partition, or the '/boot' partition 2gb swap space logical partition
10gb ext4 logical partition -- this is either the '/' or the '/boot', it contains the 'bin,boot,cdrom,dev' etc folders 243gb (the rest of my hard drive, with the exception of a partition that contains documents and files from my XP OS, formatted to NTFS) ext4, this is the one that has all my desktop/documents/etc folders.After Ubuntu was done installing, I had some message pop up about installing an ATI proprietary driver for my ATI graphics card (an ATI Radeon HD 4330, I believe, I may have messed that number up). I installed it and rebooted, no problem.
Next, I had another update window pop up with 198 items checked and ready to download and install. I went through all of this, and rebooted, again, no problem.Next thing I did was install some apps that were essential for me to have to use for my work (an ide, chat programs, etc). No problem with any of that.Last thing to install was the OSE Virtualbox, and then I installed WindowsXP Pro and Windows Vista Business, then installed the guest addition addon for VB. This all worked without any issues whatsoever.
Time goes on, and I notice my computer is heating up much more than (seemingly) normal. I begin to wonder if its my graphics card. So I shut down the computer and let it cool down. Reboot, and no problem, still working fine.Then I opened a couple of apps and tried a simple game (can't remember the name) I believe it was a simple 3d topdown, as I wanted to test my graphics card. This is where things seemed to start to go wrong. My laptop began hanging, not even allowing me to access the terminal via ctrl+alt+f2. The screen flashed and I saw the blue/green/grey fuzz that I get when the graphics card is starting to heat up too much. Then everything hangs and I can't do anything at all, including move the mouse. I did a hard reboot (I believe this is what you call pulling the plug/pressing the power button, correct me if I'm wrong). I then rebooted, saw a chkdisk, then it booted seemingly normal, but it hung right after the purple screen after the grub screen.
This is pretty much where I'm at right now. I strongly suspect the fault is with the ATI drivers, but have been completely unsuccessful in my attempts to fix it. I've googled just about everything I could think of, along with searching these forums. I've tried just about everything listed in the forums, but to no avail.I've tried the commands that are supposed to purge the ati drivers, but all I get are errors that say they can't remove the 'virtual drivers'.
Right now I'm booting off a live cd, so I know the computer still works fine, just not my actual installed OS. I'd really like to get the issue resolved without having to reinstall, as it took quite awhile just to get it usable in the first place, but this has already taken so much time, I may just resort to that if we can't solve it any other way. Got too much work to catch up on as it is.As a re-instated note, perhaps if you have any tips, but not particularly about fixing the OS, my laptop (I'm strongly guessing my graphics card) is heating up much more than normal, compared to that when XP was installed. Is this more than likely just a driver issue, as is the rest of it? Also, I did have Compiz installed, though I didn't choose for it to be installed, I believe it came pre-installed. I've heard it could cause some issues, though I have no idea as to the validity or relation to this particular issue.
Edit:
I just remembered while searching for a solution, I found a post somewhere that said something about the information not being sent to the monitor from the graphics card properly, thus no desktop. I'm guessing that'd still fall under the driver issues, but again, I'm unsure. I would think that wouldn't be entirely true anyway, since I can still see my mouse fine, just no desktop, only a black screen.
I try to install openSUSE 11.4 KDE RC 2, unfortunately I show black screen after GRUB screen. I must press Power button to turn off my computer. I hope it won't on openSUSE 11.4 stable. I'm waiting for downloading openSUSE 11.4.
View 8 Replies View RelatedI have installed Maverick onto an INTENSO 320GB USB Hard Disk. I can boot from GRUB, but only get a dark grey screen, with no cursor. I have tried editing the boot script, removing "quiet & splash" and putting in "nomodeset". I have also tried "i915.modeset=1" and "i915.modeset=0". Also "xforcevesa" and "nouveau.modeset=0". None have worked. I have not been able to reach a console screen to log in. Here are the specifications of the machine:
[Code]....
Are the number of spaces between "ro" and "quiet and splash" essential? There are three spaces on the boot script and I have left them there. Ubuntu works fine as a live CD, and I experienced no problems with the installation.
I am installing 11.04 on a Gigabyte E7AUM-DS2H with an onboard GeForce9400. I'm trying to turn this into an XBMC htpc. I'm not using xwindows or anything like that. Going straight to console for now. I'm experiencing the GRUB Black/Blank screen. I just don't know what else to try...
1. I've changed the kernel boot options, i.e. nomodeset
2. I've toggled the GRUB_GFXMODE=640x680 line
3. I've remembered GRUB-UPDATE
4. I can get into GRUB menu using SHIFT at bootup, messing around with settings and CLI there
5. I started with default nvidia drivers (not good), and then installed nvidia-current - that works better.
6. At the blank screen, I can hit ALT-F1 into console/tty fine.
7. If I use nosplash --verbose, I get a long wait with a blank screen, then the last bits of the bootup log and the login prompt.
8. And stuff I've forgot I've done....
Now what I really can't understand is that I have XBMC installed AND working beautifully. I can set XBMC to autorun with no trouble at all. It's just the period between bios and XBMC that it all goes dark. When I quit XBMC, I get a blinking cursor, which I can F1 to the console. What is it with GRUB??? What am I missing? Why is this so difficult? I COULD live with it, but its just not right, and I want to get it right.
PC specs: i7 920, Ati HD5870, 4GB ram Installing Ubuntu 10.04 from a USB stick. The stick is fine as I installed Ubuntu on my laptop with it no problem.
Problem #1: The grub boot manager is missing. The first time I installed Ubuntu it appeared as usual and let me choose between windows 7 and ubuntu. Due to the black screen issues I uninstalled Ubuntu. Since then, every time I've tried reinstalling it I don't get the grub boot manager, instead my PC goes straight to windows. I have formatted the partition I installed Ubuntu on, as well as installing it on another drive, to no effect.
Problem #2: After the Ubuntu splash screen, I'm greeted by a black screen. After a few seconds my monitor goes into standby. Ctrl+alt+f1 does nothing, and removing quiet and splash from the command line didn't help either. I hear I need to use vesa drivers but I have no idea how to go about this when I can't even get the OS to start in the first place.
I have Ubuntu 10.04 installed on dell inspiron 5150. Original installation was perfect. Wireless Internet worked right away. Screen resolution was perfect. One day, after a month or so, after original installation I got a notification that new updates are available. So, I installed all updates. At the end there was a notification: Update is successful, please reboot. After reboot I got a black screen with the header:
GNU GRUB version 1.98-1ubuntu7(I hope it's not a ubuntu version of windows blue death screen). I could install 10.04 from scratch, but I can not do it after every update.
I just upgraded from 9.04 to 9.10 (using Update Manager) in an attempt to get to 10.04. Installation and upgrade seemed to go OK until reboot. Now I only get a black screen - I don't see the grub menu, I don't even see any way to access the BIOS menu- not even a blinking cursor. I can hear it start and I can see the numlocks key go on. Ctrl-Alt-PrtScrn-B does not reboot (nor does Ctrl-Alt-Backspace- but I didn't expect that would) Surprisingly Ctrl-Alt-Del does (or at least it sounds like it does) reboot the system. I do have a NVIDIA cards and after reading around I suspect that this is likely the problem but I have no idea what to do now..
Here's what I've attempted:
I figured since I wanted to get to 10.04 anyway and this was so troublesome I could just go do a fresh install with a Live CD or USB to 10.04. However, even with a live CD or USB I still just get a blank screen.
Continually holding down F2 (and other function keys to try to access Bios)
Holding down Shift while booting
Esc while booting
Moving the monitor to the VGA port (as opposed to the NVIDIA card).
Other information...
Previously I had tried to upgrade to 9.10, but ran into problems with it not recognizing my RAID, so I just found it easier to go back to 9.04. (So although this is likely a graphics problem I guess the possibility is that now it doesn't even see my boot drive- although- if that was the case, I'd assume I wouldn't have the same problems from the CD or USB boot.) My ultimate goal is to get this to 10.04, if I could do it with an upgrade instead of a fresh install I'd prefer that, but at this point just getting back to a functioning computer would be ideal. I see many options in other posts for how to get back once you can access a command line- but since I can't even see that, I'm not sure what to do now.
My ubuntu desktop died yesterday. I rebooted my computer in like 1 month and after grub, the screen is all black and it stays there... forever. So I decided to see if the problem persists or not when I completely upgrade my ubuntu to the latest version. So I downloaded the latest ubuntu iso from the site, burned it, and booted from CD and I see several selections to choose from the menu list. The second one was "Install Ubuntu". What I'm worried about is I don't know whether selecting 'Install Ubuntu' will erase all my previous data, or there will be an option to upgrade Ubuntu without erasing all the data. Is it safe to install from the live disk? Will my data be safe? Is there any way to upgrade my Ubuntu on the HD to the latest Ubuntu from a live disk?
View 3 Replies View RelatedI am running ubuntu 10.4, windows 7, and I had ubuntu 10.10 on a single hard drive. I upgrade the 10.10 system to 11.4 and now my grub menu which is on the 10.4 system shows two windows and two 11.4 installations.
How can I clean this up? Also I have tried to start with the grub 1.99 on the 11.4 system and all I get is a black screen at startup. I am happy with grub on 10.4 except for the extra lines.
[Code]...
I'm trying to install Ubuntu 8.04 on my computer (yes...I know version 10 is out...I will get it when I get this version installed).Here's my dilemma, I get through all the way to the partition. I don't have Windows on the computer, so check the button labeled something like "Whole Disk" or something along those lines. So, after a while (about 1+ hour), it all of a sudden turns into a black screen with the "running" mouse on top of it. The screen isn't frozen, the mouse is still moving, and it sounds like the computer is still "chugging" away
View 1 Replies View RelatedI insert my live cd, I restart Windows, I click F12, I click boot from CD Drive, and a purple screen with two icons appear on the bottom. Then about 1 second later, the screen becomes black, and a _ icon starts flashing for 10 minutes up in the top-left-hand corner. After that, my screen just becomes black.
View 9 Replies View RelatedI have been using ubuntu wel a long time now and I know my way around in linux but I recently updated my laptop from ubuntu 10.04 to ubuntu 10.10 all went fine until I had to restart my laptop. I got a purple screen (loading screen) with 4 dots and a oldskool like font which said: Ubuntu 10.10 Right after that the screen goes purple and its like the system halts I hear no login sound etc just a purple screen. So I did a clean install from the 10.10 live cd which booted perfectly fine and the system was also useable like before. But when I installed the system and rebooted it again no problems.
But when I tried to install the proprietary nvidia driver (the recommended one) I got the same problem again the purple screen. After searching a while on the internet I only found posts which had the problem with ATI cards but my laptop is fitted with a Nvidia Geforce 9300 M card. So I tried several things like removing the xorg.conf (read it somewhere) which ofcourse did not work, and booting in graphics fail safe mode which worked. So the point is in 10.04 and 9.10 I CAN use my video card drivers but not in 10.10 is there a solution to this problem? I am talking about the 32 bit version of ubuntu and here's my system hardware profile:
Intel core 2 duo t7350 @ 2,0 ghz / 3mb l2 cache
2 GB DDR3 ram
160 gb hdd
Nvidia 9300m gs
Chipset: I dont know sorry
Model: Samsung R710
Is there a known problem with the Lubuntu 10.10 image here? I have downloaded it to two different computers, then burned the images to two different blank CD's (different brands) and neither loads. Both only get as far as the Lubuntu menu, once ENTER is pressed at that point to load the LiveCD, a blank screen eventually appears with a flashing cursor at the upper left of the screen, that's it. They were both burned using the slowest burn speeds available.
View 9 Replies View Related'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
View 4 Replies View RelatedAfter succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
I have problem with my Debian. Sometimes after reboot I can see only mouse cursor (moveable) and black screen with command prompt in top -left corner. I don't know how to fix it...
Code: Select allroot@debian:/home/rafal# lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 8.1 (jessie)
Release: 8.1
Codename: jessie
[code]....àwwwwwwwwwwwwwwwwwwww~s
I've been running 5.05. Just in the last few weeks after I update the screen will go black after a few reboots. I believe it has something to do with the ATI Drivers. If I clean install and install the smxi drivers after a few reboots the screen goes black right before the log in screen. This also happens with Mepis and Dream Linux which are Debian Base.
View 6 Replies View Relatedafter a couple of years using Debian derivatives, I decided to try debian 5. Seemed to install okay. Installed Mint afterwards (as debian didnt boot) and debian is visible in the boot menu. Upon selection of debian, I just get a black screen and the monitor gives the message "input not supported". I havent had any such problems with numerous distros over the 2 years.
View 10 Replies View RelatedI was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies View RelatedI thought I'd breathe some new life into my aging PowerMac G5 desktop computer by installing debian. I burned the CD and ran the installer and everything installed okay, but when I went to boot it up for the first time, the screen blacked out after a few seconds of scrolling text and shows no signs of life after that. The computer just stops sending video to the monitor, and the only thing I can do is shut it down by holding down the power key.
View 13 Replies View RelatedI am a complete beginner to Linux (I understand a little bit of terminal from my OSX usage). I did a fresh install of Debian on an older Gateway laptop to try and make it usable for something. There is no other OS installed to this machine, I would like it to run Debian exclusively.
I used the UNetbootin application to install Debian from USB [URL] ..... Everything seemed to install just fine (no errors). However, upon 1st boot, I am presented with a black screen with a blinking white cursor. I cannot seem to get past this. I searched around and found this post: [URL] ... which seems identical except that their machine is a Mac. I had no luck using the REISUB reboot method. When I hold Alt+SysRq or Alt+PrtSc, it makes a lot of beeping noise. Issuing the REISUB keystrokes while holding does nothing.
I've just put a fresh install of 64 bit Lenny on my new HP server. All went well so I thought to install KDE. On reboot, the screen just goes black.Could I have some helpful suggestions on how to start working out what the problem could be?
View 7 Replies View RelatedI have a problem after installing Debian and running it on my machine. Instead of taking me to a splash login screen, it instead remains a black screen like a console where I type in my username and password, and it remains in this black command line mode beginning ben@ben-desktop:~$. Like it does in a terminal. What can I do to resolve this? This is completely new to me and hasn't happened to me in Ubuntu or Mint. I am familiar with using the terminal for the odd task but obviously I can't use it like this without a visible desktop.
View 14 Replies View RelatedI get black screen when i press ctrl-alt-f1 or when i try to stop gdm, pressing alt-f7 nothing happens.
vga is ati hd 5650 how can i fix?
is it ever possible to do dual booting with grub(legacy) ever at all!. it is possible provided i take some pain, here is the link of that post [URL] i was coward and weak i didn't try that out then. but i did try it out. now so if u haven't seen the post .... I've installed Fedora 15 desktop(Gnome) with physical Logical volume called vg_fedora lv_root(ext4) ,lv_swap and lv_home(ext4), with 500MB /boot partition and had about 200GB free hard disk space ... so i wanted to install Scientific Linux 6.1 (because our school uses RHEL 6.1)
so, while running the installer I made (added) a logical volume lv_Scientific with ext4 FS and made its mount point (/) and used the MBR /boot which overwrote the Fedora /boot (completely OK and was as expected) i restarted after installation i got SL log in and as per the directions of the thread i copied the boot stanza from grub.conf of fedora 15 (which i already had copied and pasted into a text file and copied it from there)and pasted it into grub.conf of SL you may ask why did i choose same physical LVM too save swap space ... if i had made another physical LVM i had to make another swap ( i like LVM ... its cool)
completely unexpected happened Fedora now boots but not SL when grub starts i get this error 27 unrecognised commad and when i press <enter> i get grub menu with SL and fedora when i press on Fedora it works well i get my fedora login and i did login .. everything works fine but when i press SL it goes to the previous black screen grub error 27
[Code]...