Ubuntu :: Stuck On Black Screen With (mouse) Cursor After Grub And A Purple Screen?

Jul 21, 2011

I installed Ubuntu 11.04 today as the main OS on my laptop.I had deleted my XP partition, and repartitioned it according to a guide I had found. (http:url)......Basically it was setup like this: 500mb ext2 primary partition, has the grub folder, I believe this is either the '/' partition, or the '/boot' partition 2gb swap space logical partition

10gb ext4 logical partition -- this is either the '/' or the '/boot', it contains the 'bin,boot,cdrom,dev' etc folders 243gb (the rest of my hard drive, with the exception of a partition that contains documents and files from my XP OS, formatted to NTFS) ext4, this is the one that has all my desktop/documents/etc folders.After Ubuntu was done installing, I had some message pop up about installing an ATI proprietary driver for my ATI graphics card (an ATI Radeon HD 4330, I believe, I may have messed that number up). I installed it and rebooted, no problem.

Next, I had another update window pop up with 198 items checked and ready to download and install. I went through all of this, and rebooted, again, no problem.Next thing I did was install some apps that were essential for me to have to use for my work (an ide, chat programs, etc). No problem with any of that.Last thing to install was the OSE Virtualbox, and then I installed WindowsXP Pro and Windows Vista Business, then installed the guest addition addon for VB. This all worked without any issues whatsoever.

Time goes on, and I notice my computer is heating up much more than (seemingly) normal. I begin to wonder if its my graphics card. So I shut down the computer and let it cool down. Reboot, and no problem, still working fine.Then I opened a couple of apps and tried a simple game (can't remember the name) I believe it was a simple 3d topdown, as I wanted to test my graphics card. This is where things seemed to start to go wrong. My laptop began hanging, not even allowing me to access the terminal via ctrl+alt+f2. The screen flashed and I saw the blue/green/grey fuzz that I get when the graphics card is starting to heat up too much. Then everything hangs and I can't do anything at all, including move the mouse. I did a hard reboot (I believe this is what you call pulling the plug/pressing the power button, correct me if I'm wrong). I then rebooted, saw a chkdisk, then it booted seemingly normal, but it hung right after the purple screen after the grub screen.

This is pretty much where I'm at right now. I strongly suspect the fault is with the ATI drivers, but have been completely unsuccessful in my attempts to fix it. I've googled just about everything I could think of, along with searching these forums. I've tried just about everything listed in the forums, but to no avail.I've tried the commands that are supposed to purge the ati drivers, but all I get are errors that say they can't remove the 'virtual drivers'.

Right now I'm booting off a live cd, so I know the computer still works fine, just not my actual installed OS. I'd really like to get the issue resolved without having to reinstall, as it took quite awhile just to get it usable in the first place, but this has already taken so much time, I may just resort to that if we can't solve it any other way. Got too much work to catch up on as it is.As a re-instated note, perhaps if you have any tips, but not particularly about fixing the OS, my laptop (I'm strongly guessing my graphics card) is heating up much more than normal, compared to that when XP was installed. Is this more than likely just a driver issue, as is the rest of it? Also, I did have Compiz installed, though I didn't choose for it to be installed, I believe it came pre-installed. I've heard it could cause some issues, though I have no idea as to the validity or relation to this particular issue.

Edit:
I just remembered while searching for a solution, I found a post somewhere that said something about the information not being sent to the monitor from the graphics card properly, thus no desktop. I'm guessing that'd still fall under the driver issues, but again, I'm unsure. I would think that wouldn't be entirely true anyway, since I can still see my mouse fine, just no desktop, only a black screen.

View 1 Replies


ADVERTISEMENT

Ubuntu Installation :: Lucid (monitor Switches To Standby) - Screen Goes Black With A Flashing Cursor Then Changes Back To Purple

May 5, 2010

I cannot install Ubuntu 10.04, or even boot into the live CD. I'm not an expert, but I've used Ubuntu for several years, and I'm pretty sure I'm not doing anything stupid... Here's what happens when I boot with the Ubuntu 10.04 live CD: I get a purple screen with just an accessibility(?) symbol at the bottom (this lasts 15 seconds). The screen goes black, with a flashing cursor, then changes back to purple, this time with an Ubuntu logo, with 5 dots acting as a progress indicator (this lasts about 1 minute). The screen switches to standby. The CD drive continues to make noises for another minute or so, then stops.

I physically removed my graphics card (ATI Radeon HD 5770), and plugged the monitor straight into the VGA port on the motherboard. Now the CD boots up fine. I could try installing Ubuntu at this point, while my graphics card is unplugged, and then plug my graphics card back in, and see if it starts working then.

View 9 Replies View Related

Ubuntu Installation :: Can't Boot 10.04 Disc - Boots To A Purple Screen Then It Goes To A Black Screen With A Load Of Writing Nothing Else Happens After Screen

May 12, 2010

I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?

View 1 Replies View Related

General :: Lost StartX - Black Screen With Active Mouse Cursor

May 25, 2010

Redhat Ent Linux ES Release 2 (Taroon 8)
Kernel 2.4.21-4.ELsmp
startx(1): initialize X session - Linux man page

I thought I'd look into methods of recovering from a lost password for future use, how to change the passwd and shadow should I need to. So I started an X session, vi'd my .swp files then logged off. Perhaps I changed one of these files accidentally, but my intent was just to view them which I did. After starting up my computer the next day and logging in I began an X session - "startx". The session appears to have started, but with a black screen and an active mouse cursor.

View 2 Replies View Related

Ubuntu Installation :: Can't Boot From Cd \ Purple Screen With A Couple Symbols At The Bottom, And Then The Screen Goes Black?

May 27, 2011

'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens

View 4 Replies View Related

Ubuntu Installation :: Black Screen With No Cursor From GRUB In 10.10

Feb 26, 2011

I have installed Maverick onto an INTENSO 320GB USB Hard Disk. I can boot from GRUB, but only get a dark grey screen, with no cursor. I have tried editing the boot script, removing "quiet & splash" and putting in "nomodeset". I have also tried "i915.modeset=1" and "i915.modeset=0". Also "xforcevesa" and "nouveau.modeset=0". None have worked. I have not been able to reach a console screen to log in. Here are the specifications of the machine:

[Code]....

Are the number of spaces between "ro" and "quiet and splash" essential? There are three spaces on the boot script and I have left them there. Ubuntu works fine as a live CD, and I experienced no problems with the installation.

View 9 Replies View Related

General :: 10.10 Booting To Terminal - Black Screen Instead Of The Normal Purple Screen

Dec 8, 2010

i am fairly new to Ubuntu. i was using it fine for a month, but today, when i booted my computer up, it came up with a black screen instead of the normal purple ubuntu screen. the black screen had white text on it, and asked for my username and password. from there, it was a terminal prompt. i have been google searching for a while, and have tried typing "startx", "sudo apt-get install ubuntu-desktop", "sudo gdm", and i have also tryed uninstalling xorg, and reinstalling, and none of these things wanted to do anything for me.

View 4 Replies View Related

Ubuntu :: GRUB - Boot Windows Goes To A Black Screen With A Blinking Cursor

May 3, 2010

I dual-boot Windows 7 and Ubuntu. Sometime between 4/18 and a few days ago, something happened with Windows booting up. Ubuntu boots fine, but whenever I try to boot Windows, it just goes to a black screen with a blinking cursor (the command line kind, not a pointer). At first I thought it was Windows, but I have run the repair CD and executed chkdsk /f and chkdsk /r on all partition related to windows. No effect.

I ran a system check designed for issues with booting up, and it found no errors. I have looked at my GRUB files, and they all look fine. I am not sure if it is GRUB or Windows. I tried reinstalling the Windows boot-loader, and it had the same effect, the only difference is that it bypassed GRUB. The reason I think it may be GRUB is that the error happened around the same time as me upgrading from Karmic to the Lucid RC. I have posted this on a Windows 7 forum.

View 9 Replies View Related

Ubuntu Installation :: Black Screen, "loading" Mouse Cursor After Partition On 8.04?

Jan 7, 2011

I'm trying to install Ubuntu 8.04 on my computer (yes...I know version 10 is out...I will get it when I get this version installed).Here's my dilemma, I get through all the way to the partition. I don't have Windows on the computer, so check the button labeled something like "Whole Disk" or something along those lines. So, after a while (about 1+ hour), it all of a sudden turns into a black screen with the "running" mouse on top of it. The screen isn't frozen, the mouse is still moving, and it sounds like the computer is still "chugging" away

View 1 Replies View Related

Ubuntu :: 10.10 Stuck At Purple Splash Screen After Installation

Dec 16, 2010

Yesterday I booted into the Ubuntu 10.10 CD, and hit the Try Ubuntu button. Ubuntu booted fine from the CD, and after trying it for a few minutes, I decided to install it.

I already had (and still have) Windows 7 installed, so, using the Ubuntu Installer, I shrinked the C (system) partition of Windows by roughly 14 GBs. 10 of which used for Ubuntu itself, and the other 4 as Swap Area.

Installation went fine, and I was asked to reboot - and so I did. However, upon restarting, I was 'welcomed' by a stuck, purple splash screen. So I used Recovery Mode, and updated my Ubuntu. That didn't change anything. I rebooted, started Ubuntu without the "splash quiet" commands, and instead used the "nomodeset" command. I logged in my Ubuntu user, and ran the StartX command. It didn't work, and I was given a few errors, including "no screen found", "Fatal server error", and something along the lines of "no NVIDIA module found (...,0)".

So what's wrong with the NVIDIA driver, really?

View 2 Replies View Related

General :: Get A Purple Screen After Gnu Grub Screen?

Mar 17, 2011

I just started and very green, I got a old unit that has Linux instaled. I get home start it and I get a purple screen after gnu grub screen, I'm using a diferent mouse and monitor is all that changed from when I picked it up. I don't know were to start.

View 4 Replies View Related

Ubuntu :: Purple/black Boot Screen No Plymouth.

May 1, 2011

I already had Plymouth issues on 10.10, which was solved by this script [URL]

After upgrade, boot only gave me a blank, purple screen, so I used his revert script then tried this : [URL]

But I'm only getting a black screen. Removing vga=795 option only make it stay purple. It might be because of the multiples workarounds I tried back in 10.10, but I don't know how to clean that up. I have an ATI HD Radeon Pro 2400 card with free drivers (but I was using the proprietary ones during upgrade).

View 2 Replies View Related

Ubuntu Installation :: Purple Or Black Screen In Natty?

May 11, 2011

If you had or have a black screen or purple screen problem in Natty, add support by subscribing to this Launch Pad Bug: Xorg's HAL causes Purple Screen or Black Screen on GDM startup. [URL]

Through helping people with these problems in the Ubuntu Support Forum (Installations and Upgrades) and through this sticky: [URL] this bug (above) seems to be where this problem is originating. It affects this problem with all video hardware types. As I said in this bug report: "Normal users should not have to be highly skilled "techies" to manually bypass a broken part of a system to make a released distribution work during an install or distribution upgrade"

View 1 Replies View Related

Ubuntu :: Black Screen And Mouse Arrow After Long Screen Saver Shutdown?

Jun 25, 2011

I have recently installed 11.04 natty on Intel Core i3-2100 3.1 GHZ using its own graphic accelerator. When the screen is idle for a long time, more than 1 hour, I get a black screen with the mouse arrow but nothing else. the mouse moves the cursor and Ctl+Alt+F1 does work. How to fix this problem?

View 4 Replies View Related

Ubuntu Installation :: Boot From USB Drive - Purple / Black Screen Comes Up

Feb 1, 2011

I am having problems installing Ubuntu netbook 10.10 from a USB drive.
I have a Lenovo ideapad S10-3 with Win 7 Starter.
I have tried two different USB drives, one is unidentifiable, the other is a Kingston.
I have used Pendrive and Unetbootin on both.
I have tried formatting the drives to FAT32 from both the Pendrive option and from Win7's default formatting software.
I downloaded the iso from the Ubuntu website torrent, and I did an md5 check to make sure that the file matched up.

When I boot from USB, the purple screen comes up briefly, and after two seconds changes to a black, terminal screen on which a bunch of text scrolls and then it eventually freezes. When I click a button, the menus pop up, and when I click on either "install" or "run from usb drive," the same terminal thing happens. Someone recommended that I try installing from that screen after changing the f6 options to nomodeset, noapci (I think), and acpi=off. (I cannot remember the exact lettering, but they were options on that f6 menu.) None of these changed the result.

With the Kingston, the line that it freezes on in the terminal is:
[6.548159] USB Mass Storage support registered.
With both drives, when I use the Unetbootin install, the menu comes up, and when I click on either the 'run' or 'boot' options, the cursor in the bottom left of the screen keeps flashing but no progress. (No terminal-like screen with this one.) It is different with the other drive. How to proceed from here?

View 9 Replies View Related

General :: Acer A0A 110 Has A Black Screen During Boot Up Along With A Black Cursor?

Dec 8, 2010

I turned on my Acer laptop and during bootup it seemed normal. After it passed the blue Acer logo, all I could see is a black screen and a black cursor outlined in white in the shape of an X. Thinking it would be a one time thing, I turned it off again.it still was a black screen.

View 14 Replies View Related

Ubuntu :: Not Booting - Get Stuck On A Purple Screen Saying "ubuntu10.10" With Five Dots Underneath It

Jan 12, 2011

i want to install ubuntu 10.10 but when i insert the cd into my laptop and boot from it,it get stuck on a purple screen saying "ubuntu10.10" with five dots underneath it

View 1 Replies View Related

Debian Installation :: Black Screen After Grub Loading Screen?

Feb 22, 2011

another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.

View 9 Replies View Related

Ubuntu :: Black Screen With Blinking Cursor?

Nov 10, 2010

Just did a fresh Ubuntu 10.10 (minimal) install on my Asus EEE PC 1001PX.Before the minimal install I had Ubuntu Netbook Edition 10.10 which worked flawlessly, now all I get is a black screen with a blinking cursor:for the amazing quality, but I guess it's better than nothing.ctrl+alt+Fx does nothing, ctrl+alt+del reboots the computer.Booting with the usb-stick that was used for the install takes me to the login...

View 3 Replies View Related

CentOS 5 :: 5.4 VNC Black Screen With Cursor

Jan 13, 2010

I decided to give a try to VNC server on my remote dedicated centos machine. WHAT I DID:

yum groupinstall "X window system"
yum groupinstall "GNOME Desktop Environment"
yum install vnc-server
Followed the Centos wiki tutorial.

PROBLEM: After typing the password in my vnc viewer I get a black screen with cursor. I can move the cursor about but thats it.

SOLUTION: I have googled like crazy for the last 2 days but have not found a solution yet. My best guess is xorg.conf file, but I am quite new to linux so could be wrong.

View 19 Replies View Related

OpenSUSE Install :: Black Screen After Grub Screen On 11.4 KDE RC 2

Mar 9, 2011

I try to install openSUSE 11.4 KDE RC 2, unfortunately I show black screen after GRUB screen. I must press Power button to turn off my computer. I hope it won't on openSUSE 11.4 stable. I'm waiting for downloading openSUSE 11.4.

View 8 Replies View Related

Ubuntu Installation :: Black Screen, Flashing Cursor?

Jan 21, 2010

I have just wiped my whole hard drive to install a fresh copy of Ubuntu on it, and now as soon as i power it up it passes the POST screen and black screen shows up with a flashing cursor. I bliv it should say no operating system and pick the USB which has Ubuntu installation on it.I have formated the hard drive to NTFS, the system is Samsung NC10.

View 9 Replies View Related

Ubuntu :: Get A Black Screen With A Blinking Cursor After Start Up

May 5, 2010

A few weeks ago I installed Ubuntu 10.4 beta on a pc. I upgraded it to 10.4 RC and 10.4 final release. I think it was after upgrading to 10.4RC that I started having a problem during startup. Here is what happens:
I turn the pc on the bootstrap process occurres, then the grub screen comes up I let ubuntu boot. For a few seconds I get a black screen with a blinking cursor. The Ubuntu splash screen flashes on the screen for maybe a second or two. Then I'm dumped to the command prompt on TTY1.

At this point I can log in with a username and password type startx and I'm at the ubuntu desktop. If I log off I'm back at the command prompt on TTY1. If I press alt-ctrl-F7 at the command prompt this is what I see, these are the last four lines of text: init: ureadahead-other main process (742) terminated with status 4

[Code]...

View 4 Replies View Related

Ubuntu :: Sometimes Not Booting - Screen Goes Black With The Blink Cursor And Nothing Happens

Aug 25, 2010

I have windows 7 + Ubuntu 10.04 in dual boot, I noticed that sometimes the ubuntu was not booting.

Right after I select the os in grub (ubuntu) the screen goes black with the blink cursor and nothing happens, that's all no messages it's stuck there forever.

Today, it does this every time I try to enter Ubuntu, it's just stuck there.

View 9 Replies View Related

Ubuntu :: New Install Black Screen After Blinking Cursor?

Oct 25, 2010

just did a dual boot install on a brand new DEll T1500. The machine has win7 on it. I booted off the live CD and all looked well. Installation went well. When I reboot, I get grub, select the top linux option and then see a small black blinking cursor for a few seconds, then nothing. The screen reports no signal.

View 8 Replies View Related

Ubuntu Installation :: Black Screen And Cursor On Install?

Mar 17, 2011

I am trying to do a dual boot of XP and ubuntu. I have 3 hard drives and I plan to put ubuntu on one of them. I have created a DVD from the ISO for 10.10 using programs and methods recommended by ubuntu, and it burned correctly onto the DVD. When I boot with the dvd in the tray the computer says something about linux iso then the screen goes black with a Human=Keyboard symbol at the bottom for a few seconds. Then my screen goes black with a blinking cursor in the top left of the screen. I have let it sit for a while and the PC shows no signs of drives working.Also if I remove it the PC automatically boots to windows.

View 5 Replies View Related

OpenSUSE Hardware :: Nvidia Card Not Working / Screen Was Stuck At Blinking Cursor?

Jan 24, 2010

i am sort of newbie to linux,i recently installed opensuse 11.2. i also installed nvidia card via 1 click install..

after install compositing didnt work,it said "someother program is blocking it ,type alt ctrl f12 to enable" after i hit that,my screen was stuck at blinking cursor,

so rebooted went to init 3, typed sax2 ,it showed me the options ,it passed the test screen,but after reboot didnt work.rebooted and hit sax2 -r -m 0=nvidia,again showed me option ,but didnt work.

everytime i login i see nvidia logo flashing up,but after login compostiting is still not enabled ,i have no idea what is wrong help please..

my other option is to type nvidia-xconfig to
my config,
nvidia 6150 card,opensuse 11.2 32 bit,amd turion,

my xorg.conf

Code:
# /.../
# SaX generated X11 config file
# Created on: 2010-01-24T16:06:50+0530.
#
# Version: 8.1
code....

View 9 Replies View Related

Fedora :: Black Screen Appear With A Cursor Blinking?

Jul 11, 2011

I am using fedora 15 on my dell studio 1558 . Sometimes a black screen appears with a cursor blinking when i tries to reduce the brightness of the laptop and somethimes it automatically happens . And i am not able to do anything its just like the blue screen of death as in windows . the only way to get back is by restarting the computer

View 8 Replies View Related

OpenSUSE :: 11.3 VNC Black Screen /w Cursor Then Timeout ?

Jul 19, 2010

Seems to happen with every version! I have the same problem as my last thread. Basically it was solved by removing an IPv6 line from the hosts file or adjusting the vnc configuration to use an IP and not host name. Both of these are not working for me on 11.3. I'm not seeing any errors in log/messages. It just sits there with an X cursor that moves around then times out after around a minute or so. I don't know if there are any other logs that will help.

To clarify, starting a vncserver from a terminal will work, but the 'Remote administration' vnc with the login screen will produce a fully black screen with an X cursor that updates with my mouse position.

View 9 Replies View Related

Ubuntu :: Unity Leaves Computer With Purple Background And Large X For Mouse Cursor

May 13, 2010

I added the unity ppa and installed unity to check it out thinking I could just switch back with

Code:

dpkg-reconfigure gdm

Unity left me with just the purple familiar backdrop and a large black X as the mouse cursor. In running the above statement I'm left with the background and cursor only. how to get unity working and/or how to get back to gnome?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved