I downloaded the usb-modeswitch and usb-modeswitch-data as suggested by one of the users from [URL] but whenever I try to install after going to the folder using sudo make install, none of the packages get inatalled. I am a new user and I am using ubuntu 9.10. I want to use my MICROMAX 300G USB modem to surf internet but can not do.
View 2 Repliesfind and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
I couldn't connect my Micromax 300G modem in Debian Linux. From internet (in Windows Vista), I came across the information of USB_ModeSwitch and then I downloaded it. While going to install it, I came across the problem that TCL-interpreter is not available in Debian Linux. Then again I restarted my laptop in Windows Vista and connected my Micromax modem and from internet downloaded TCL8.5.10-src.tar.gz. But while going to install it, I came across the problem that " configure: error: no acceptable C compiler found in $PATH " . Also as presently, I am unable to connect my modem therefore I am unable to issue the code:" apt-get update ".
View 16 Replies View RelatedI'm trying to install my first linux system. I would like to use it as a server on an old 386 PC.For the internet connexion (ADSL) i use a Speedtouch USB modem.When i list the peripheral installed on the system, i see the modem with apparently a driver, but the device is listed as non classified. For me it should be directed to DSL0 but..According to some tuto i declared a DSL connection, ppp with ATM (VPI8 and VCI35).I launch the connection with pinternet but the connection failed.
View 4 Replies View RelatedI have a Huawei U7510 mobile phone (using the '3' network in the UK) and want to connect to the Web using this device when I'm not at home.
I dual boot my laptop (Karmic and Win7) and have successfully connected to the net in Windoze.
I have downloaded GnomePPP but it can't detect the modem. how to setup my connection in Karmic
I am using Linux Mint 9 Gnome: Isadora (since the same Network Manager applet is used in Ubuntu, I am asking the question here too)I was trying to configure my wireless card to connect my PPPoE connection by using the command pppoeconf wlan0 and also pppoeconf.I was not able to dial my PPPoE connection when connected via Wi-Fi. When I restarted my system, in the Network Manager, under Wireless Networks it says "Device not managed". Now I am not able to use my Wi-Fi card at all and cant connect to my Wi-Fi modem.
There is no hardware Wi-Fi switch, only the key combination Fn+F2 to enable or disable the wireless card.I have used the key combination Fn+F2 (which enables or disables the Wi-Fi card) many a times, but the same thing is displayed in the network manager.If I use LiveCD mode and use any distro even Isadora, the Wi-Fi works fine.My ethernet connection is working fine. I can connect to the internet if I connect my modem using Ethernet port.
I have a ZTE MF100 3G internet USB modem working fine under ubuntu 10.04 but, there is a little problem:-It does connect in 2 modes: 2G and 3G. If 3G signal is fairly strong, downloading speed reaches 200 KB/s for 600 MB/Day, then for the rest of the day it switches to 2G mode with 15 KB/s max downloading speed. If 3G signal is weak, it switches automatically to 2G, and that's what I hate. Under Windows, I can manually force the modem to connect in 3G mode even if the signal is weak.
View 1 Replies View RelatedI installed Ubuntu 10.04 this morning and everything is working fine apart from one thing. I am unable to install my Speedtouch 330 modem on it and connect to the internet, I looked on the help pages and found this:
"Visit Ubuntu Packages Search and search for each of the following packages. Download them to a folder that is also visible from Ubuntu (or to a USB stick).
As I cannot access the internet I had to go back to windows, download them onto a memory stick, go back on to Ubuntu and install them. The first 12 worked fine and are now installed but number 13 and 14 wont allow me to update because "the dependency is un-satisfiable" does anyone know what this means and how I can fix it? I was also unable to get the USB ADSL Modem Manager too install either because of another error.
I have a ZTE CDMA 1x Modem (Reliance Netconnect). The modem has a USB interface and it works as a PLUG-&-PLAY device on windows (and has a Flash Storage too for driver information for windows.) I am unable to find my modem on Linux machine so that i can use wvdial for getting connected to internet on my linux machine. This the dmesg output for my modem.
[Code].....
First of all heres the LSUSB command output:
Code:
Bus 005 Device 005: ID 0af0:6971 Option Globetrotter HSDPA Modem
My Problem is following:
Output of /var/log/messages:
Code:
Jun 25 16:16:25 destination kernel: [29898.995150] usb 5-2: new full speed USB device using ohci_hcd and address 6
Jun 25 16:16:25 destination kernel: [29899.148020] usb 5-2: New USB device found, idVendor=0af0, idProduct=6971
Jun 25 16:16:25 destination kernel: [29899.148031] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[code]....
I have a home network with a linux dhcp server and a couple of clients. The Internet comes from a dsl modem with a different subnet than my wireless router. The network works fine and I have no problems, but I now need to ssh to a work computer and the only way I can do that is if I drop the security in my dsl modem. So I thought all I need to do is use port forwarding on my dsl modem, but it won't let me because it is on a different subnet. I tried putting the dsl modem on the same subnet, but that did not work and made it so I could not access anything.
View 3 Replies View RelatedTried turning firewall off, i tried port forwarding tcp port 22, but it still doesn't work. Also am unable to ping modem over WAN, i can ping the modem locally though. Tech support claims pinging and ssh is not part of the internet so they wont support it in any way.
View 6 Replies View RelatedI am unable to install a ZTE AC8710 CDMA Hi Speed Modem on Fedora 10.I have somehow found the Linux Drivers but am unable to compile them as I do not have the required Kernel Headers which I can't download in Linux because my Internet is not working.I have tried the entire process of trying to add the Device ID and setting up xvdial but I am unable to find the ttyUSB or USBtty or USBacm in /dev.
View 7 Replies View RelatedI did a port scan on my server from outside my network and saw that port 10080 AMANDA is open.Amanda isn't installed on any of my computers or my server and the port is not forwarded by my modem or router. So why is this port open and how can I close it?
View 6 Replies View RelatedI've FC10 installed. After updating a few days back, I'm unable to use Network Manager to connect to the net through my USB Modem. All the threads I've read say to do
Code: yum update NetworkManager but how can I do it without net connection? Can anyone post the exact link of the Network Manager's latest and BUG-FREE rpm so that I can directly run it?
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
i'm trying to install zoom 3095 usb dial-up modem on my laptop which has ubuntu 9.10 on it but i got an error
Where is the linux source build directory that matches your running kernel?[lib/modules/2.6.31-21-generic/build]
Building modules for kernel 2.6.31-21-generic/build, using source directory lib/modules/2.6.31-21-generic/build. Please wait...
ERROR: Module build failed! Please examine the log file "/tmp/dgcconfig-buildlog.txt" to determine why.
dgcconfig-buildlog.txt said:
(cd /lib/modules/2.6.31-21-generic/build && make "CNXT_KERNELSRC=/lib/modules/2.6.31-21-generic/build" "M=/usr/lib/dgcmodem/modules" "CC=gcc" clean)
make[1]: Entering directory `/usr/src/linux-headers-2.6.31-21-generic'
[Code]....
I have a modem PROLINK PHS 100. sometimes when I plug in the modem, can be used. sometimes there is no reaction at all. What should I do.
View 2 Replies View RelatedI've read so many posts discussing 'bout how to install prolink modem. I've followed all the posts instructions, but still none of them could me to detect this modem. I've done all the steps explained in this link
Code:
[URL].. in which many people succeded by following those steps. i already installed the latest usb_modeswitch, wvdial, gnome-ppp and all the things explained on that link.
First of all, i do all the steps explained on that nmxlaxaman link n then i restart my laptop. After then, without modem being plugged, i check with lsusb command n return
Bus 007 Device 001: ID 0000:0000
Bus 006 Device 002: ID 046d:c052 Logitech, Inc.
Bus 006 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 004 Device 004: ID 0000:0000
[Code]...
How do I installed a sprint novatel 3g modem? I see sprint under the mobile broadband tab when I create a new connection, and it shows all the right information, but I never can connect.
View 1 Replies View Relatedi have usb modem sierra 885 compass but i don't know how to install it, nor to make it work in fedora 7
View 1 Replies View RelatedI switched from windows to Ubuntu 10.10. But I'm not getting along with it as well as I expected I would Specially cause I'm not getting the best out of it due to limited web connectivity. I used to use a usb WiMax modem back in windows (which is also supposed to be supported by linux as my service provider said) for internet. But I'm having a hard time configuring it on my Ubuntu. The modem works fine but I'm failing to install the drivers [url]. I used my cell as a temporary modem to get help from the web.
I downloaded:-
i2400m firmware 1.5.0
WiMAX Tools 1.4.5
WiMAX Network Service 1.5.2
According to the documentation, I'm supposed to install the linux kernel 2.6.35 which Maverick comes with anyway.
Then comes the part to install the firmware. The command I used was
Code:
But unfortunately and annoyingly the result is
Code:
I didn't get it. Am I missing any package or something?
how to install broad band wireless modem (netgear)ADSL2 on Fedora core 7
View 2 Replies View RelatedI installed OpenSUSE 11.3 64 bit version on my Dell Laptop Studio XPS 16. My USB mouse is working nicely. However, as I inserted MTS USB MODEM, I found that device is not mounted. "dmesg" shows USB modem in sdb emulating as scsi10 drive. I tried with 'fdisk -l" which does not show the device. 'lsusb' shows the device ID. Itried to mount /dev/sdb to /media/disk after creating a directory /media/disk, but of no use.
View 9 Replies View RelatedI am trying to connect to wireless broadband using SuSE 11.2 and a Huawei E160E USB modem, through Internode Australia.
Networkmanager does not seem to recognise the modem so I am trying other means. I believe I have got wvdial to connect (it reports a correct IP address, the light on the stick goes solid blue and I can ping external IP addresses). However it can't find a DNS nameserver and I can't work out how to provide one to wvdial, and therefore can't do anything through the connection (I would rather not revert to ifup because this laptop travels between WLANs). I followed swerdna's comprehensive instructions on setting up a wireless broadband modem in YAST, but I got lost on the very last instruction: KMenu --> KInternet. I can't find this on my application launcher.
to setup BSNL's WLL modem
Model is Linktop CT800P. Device is detected as "FWP USB Modem 3197" in Windows XP.
I've setup this device in Windows XP, but unable to do the same in Linux.
i try to connect vodafone usb modem on it but m unable to connect
View 1 Replies View RelatedI'm an Ubuntu lucid user and i have AnyData adu 560d modem. i try to connect to the Internet using my modem, but ubuntu read it as usb, how can i using usb mode-switch to solve this problem,in otherworld i know what is the problem but i need the steps to solve this problem .
View 1 Replies View RelatedI have ubuntu 11.04 in my netbook and when I inserted reliance netconnect broadband usb modem,it automatically detected and after giving the necessary details it was connected..But I am not able to access any websites..On googling I found that I have to make changes to /etc/resolv.conf..But resolv.conf file is missing.
View 9 Replies View RelatedTrying to connect a computer to the internet with a modem, and I know the modem works. Was just used the other day with another linux OS.If I go into the Kinfocenter and look under pci devices with the current F12 setup, the computer identifies a 3com corp modem division 56k faxmodem model 5610.(which is a hardware modem)
View 1 Replies View Related