I have ubuntu 11.04 in my netbook and when I inserted reliance netconnect broadband usb modem,it automatically detected and after giving the necessary details it was connected..But I am not able to access any websites..On googling I found that I have to make changes to /etc/resolv.conf..But resolv.conf file is missing.
View 9 Replies
i have satanic ubuntu 8. i was trying to connect to my reliance netconnect broadband+ via the following method. the process failed. its a usb broadband dongle thing.
Code:
theunknowndoor@theunknowndoor:~$ SU
bash: SU: command not found
theunknowndoor@theunknowndoor:~$ su
Password:
su: Authentication failure
[Code]...
i recently installed Fedora 14 on my laptop and when im tryin to connect the reliance dongle its not getting detected even as a usb ... when i tried to install it on fed 13 the rpm package inside the usb stick gets installed but when i click on the shortcut for moden it shows "device not connected"
View 1 Replies View Relatedis there anyway that i can install my reliance netconnect lxu800 modem graphically(GUI). i am not well versed with command line interface. i just downloaded ubuntu desktop version and installed it alongside windows vista.
View 2 Replies View RelatedIi am not able to install reliance netconnect broadband + on my fedora 13. the os is not detecting the usbmodem .it is treating it as a usb storage device only. there is a cross p[latform package supplied by the vendor. on using this. the package after installing gives an error message that "not able to mount usb". the same is running fine on windows xp where it got auto installed without any hiccups. do reply fast to help me install and access the internet through this usbmodem through fedora 13. the model no of the usb modem is ZTE - AC2736.
View 1 Replies View RelatedI'm using ubuntu karmic and I'm not able to connect to the internet with my reliance netconnect data card using network manager. Other distros like fedora, opensuse n sabayon connected easily with nm. Ubuntu detects the data card flawlessly but just doesnt connect.This problem has been persistent even in previous ubuntu versions, n I used to use wvdial. But downloading wvdial on some other comp with every dependency is really cumbersome.
View 6 Replies View RelatedI tried connecting my reliance netconnect usb modem using mobile broadband in network connection but its unsuccessfull inspite of proper configuration.
View 9 Replies View RelatedSince few days I am trying to install my Reliance Netconnect Boradband ZTE AC8710 in ubuntu 8.04.i did similar things.in lsusb it showing usb device
root@rspatani-desktop:/dev# lsusb
Bus 004 Device 002: ID 03f0:4917 Hewlett-Packard
Bus 004 Device 001: ID 0000:0000
[code]...
I tried connecting my reliance netconnect usb modem using mobile broadband in network connection but its unsuccessfull inspite of proper configuration..
View 4 Replies View RelatedI have installed ubuntu 32 bit version on my HCL netbook. I use reliance netconnect (Huwai EC 1260 or 168c). I have configured it and it works well. But the only problem is that I have to connect the netconnect device before booting. If I connect it when its ON, the networkmanager does not connect automatically. even on the right on the tray icon, enable mobile broadband option is not there.
View 2 Replies View RelatedI am using Reliance Netconnect Broadband+ (HUAWEI EC 1260) on my Fedora 10 and Fedora 12.
View 1 Replies View Relatedi earlier used bsnl broadband(indian) in ubuntu and configure it using pppoeconf. right now i shifted to reliance broadband(not usb modem) but now pppoeconf cannot detect the connection It shows something like " Sorry I scanned two interfaces but the access concentrator of ur provider did not respond.plz chck ur ntwrk and modem cables. anoder reason fir the scan failure may be anoder running pppoe process which controls the modem
View 2 Replies View RelatedReliance Netconnet Broadband+ ZTE does not work out-of-the-box with Ubuntu 9.10. I haven't yet upgraded to Ubuntu 10.04 (iso download is at 46% ). Does it work out-of-the-box or is there some packages that need to be installed? (I have a dual-boot laptop Ubuntu/Windows 7)
View 2 Replies View RelatedI've Reliance Broadband internet modem . very first time only it was connected but next onwards it's not connecting , I am trying last one month to connect internet , I am tired .I had seen lot of thread related to this problem but it's not connecting, my device is identified by network manager and i entered user name and password ,connecting process is going on but finally it's not connecting . i installed wv dial and usb modeswith data
View 3 Replies View RelatedI am using Ubuntu 9.04, I want to connect my Reliance ZTE cdma modem in ubuntu,could anyone give the steps in detail. i have run the following commands in the terminal and pasted the result for each command
sudo lshw -C network
lspci -nn
lsusb
[code]...
Here is a method for connect usb modem in linux system.
I've created step by step process to configure the TATA/Reliance modem over linux..Pls go thru the link
I used this method to configure TATA photon+ but I hope similar way will also work for Reliance NetConnect Brodband+
Huwaie/ZTE Modem
Command Mode:
1) Check your NetworkManager rpm for Correct Installation
2) Set SELinux in permissive mode and switch to ROOT user or you can also use sudo..
3) If wvdial is not installed already, you've to install it from Fedora Repository. yum install wvdial
4) Run below command, it will detect your modem....wvdialconf /etc/wvdial.conf
If this command can't detect your modem then try below commands
i) lsusb -v grep -i iManufacturer The above command will help you to know the manufacturer of you modem and to get its vendorId and productionid.
ii) lsusb -v From above command search the vendor id and product id your of modem and execute the below command
iii) modprobe usbserial vendor=XXXXXX product=XXXXXX This command will load your modem
Now run the command given in step 4.
5) Now open /etc/wvdial.conf file in your favourite editor. I used vim for this purpose.
vim /etc/wvdial.conf
Change your username and password with internet/internet. Save and exit.
6) Now try below command..
wvdial
7) Open /etc/resolv.conf or execute below command
You can also add some global DNS echo "nameserver 4.2.2.2" >> /etc/resolv.conf
8) try to ping any site
If you get the response then you are all set for the modem, ENJOY SURFING with high Speed
GUI Mode:
Right Click on the Netowk icon on your status bar
NetowkManager > Mobile Brodband > Add
Simply follow the instructions given in GUI and setup your modem
Then Left Click on NetworkManager ICON on status bar and choose your connection and connect,
If you face any problem then set SELinux ini permissive mode and then try.
I tested the GUI method for huawei modem but, for ZTE modem, it doesn't work, Please let me know if it works for you..
I have fedora 14 and reliance netconnect Huawei EC325 modem. I am not enable to configure it. How to configure the modem by providing step-by-step instruction
View 1 Replies View RelatedI am facing a problem concerning secure websites where I get the "Connection Reset" error in browser after a timeout of I think 1 minute.
OS: Fedora 14 ( I faced same problem with Ubuntu 10.10 )Browsers: Chrome and Firefox
The issue is not there on Windows using Chrome and Firefox so I believe this is a problem with how linux manages secure connections. I can access all the google secure websites too. There a few other websites apart from facebook.com that I know which I am unable to access.
I have a lenovo x200 laptop running Fedora 14, fully up to date with the Fedora repository. Seemingly out of nowhere, some websites will no longer load. First it happened to www.facebook.com, next (after a day or so) wikipedia.org, now the Fedora forum. Other Internet access seems fine, but when I try to go to these pages I just get "unable to find host" errors. Its totally bizarre. It first happened in an airport so I thought it was just a strange network there, but now it happens at home. I can't get on these sites in firefox or elinks browsers (in a terminal) BUT I can ping both sites no problem. Also, the other computers in this house have no problem visiting these sites.
View 2 Replies View RelatedI have got my bsnl broadband few weeks ago. It is running nicely on my ubuntu lucid desktop. But form past few days I'm unable to browse some of my websites from ubuntu. I have dual boot my pc wiht Microsoft Window XP(original). The websites which are not opening in ubuntu are easily opening in xp. I have changed the DNS servers to 8.8.8.8 and 8.8.4.4 and also my MTU to 1452 but nothing is happening.
View 9 Replies View RelatedI tried ubuntu and am very happy with the smooth running and clean interface. I am having trouble setting up my network connections. It seems that I am unable to connect to the internet via my broadband modem if I am connected to my LAN via wifi. I think I need to seperate the networks so that the internet traffic does look on the lan for [URL]. I don't think I have had this problem when I used much smaller distros where I had to set it up by hand.
I might need to add some details I am just not sure what is relevant. I only have a basic understanding of what is going on.
solution:
Solved in #ubuntu irc chan with help by erUSUL.
Just in case anyone else is searching for the same thing.
In network connections in the ipv4 settings tab I edited routes by clicking the button and checked the box next to: "use this connection only for resources on its network"
I have mobile broadband which is T-Mobile UK. The modem is a Huawei E160 and on a Ubuntu page, it says that this modem doesn't work at all. That's the only internet source I have so I need to be able to use it. tried to install usb_modeswitch and I'm going to test a different piece of software later. My version of Ubuntu is 10.04.
View 7 Replies View RelatedHow do I get information about the SIM card of my USB broadband modem, for example it's phone number, serial number and so on, in Ubuntu 10.04?Not about the usb modem itself - just the SIM card inside it.Is there a way to probe it from the terminal, like you probe for usb devices with lsusb?
View 3 Replies View RelatedIs it safe to get upgrades via wireless broadband modem?
View 1 Replies View RelatedIs it safe to get upgrades via wireless broadband modem?
View 2 Replies View RelatedI am running a 3-G wireless USB broadband modem, and connecting with Network Manager, but I keep getting disconnected when idle after 5-6 minutes. I am used to using Kinternet to connect with my 3-G wireless USB broadband modem, and setting it up in Yast / Network / Modems, but was not able to configure my modem there (for some mysterious reason) so ended up using Network Manager instead.
What's going on here regarding YAST being unable to configure my modem (even when Network Manger is disabled). But my main problem at this point is that my connection times out after about 6 minutes if I'm idle. This is a big problem for me because I type slow and frequently get disconnected while posting on message boards. Where are the idle time out settings are for Network Manager? I can't seem to find them.
I installed ubuntu 10.04 in my desktop, was working fine. connecting to the internet through linksys router. now my internet is not working, because i removed the linksys router and connected directly from the internet provider modem, Motorola sbv5222 broadband modem. Now my internet is not working.
View 4 Replies View RelatedI got Mint 7 running on my Laptop, a Pentium 4 by Dell. It dual boots XP as well. But the mobile broadband which connects by the USB port only works in XP. There are small windows that say it will not run. Errors. How can I get this working in Linux?
View 1 Replies View RelatedI've been trying to use the onboard modem on my laptop for Internet connectivity. From what I can gather, Ubuntu hasn't installed a driver for the modem.
When I connect my phone using a usb cable to the laptop, I'm able to connect and browse. However, the network manager doesn't seem to have a driver for the onboard modem because it doesn't recognize it.
Anyone has difficulty in configuring the USB modem Huwaei 1260. I'm using photon plus broadband connection. Here's how I configured it.
Here the vendor id is 12d1 and the product id is 140b.
Now you have to do a modprobe.
Run wvdialconf as below.
Scanning your serial ports for a modem.
Found a modem on /dev/ttyUSB0.
The modem configuration will be written in /etc/wvdial.conf as below.
Make changes as below to the /etc/wvdial.conf
Run wvdial
Wow You are on to the net.
If your browser gives problems loading the pages add the nameservers in /etc/resolv.conf as below.
Then run the browser, there should not be any problems.
