Ubuntu Networking :: Huawei E1552 Modem To Connect To The Internet, Everything Was Going Well When Suddenly Modem Stopped Working?
Feb 8, 2010
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
I tried to connect to the huawei cdma EC325 modem. using the network manager applet. System asked which tpe of connection i selected cdma and gave the username and password for the account and the password for my opensuse account.Still i cannot connect to the internet using huawei ec325 modem.How to rectify the problem What shall i do next.
I can not get NetworkManager to handle my Huawei E220 usb modem. I have searched forums and tried a lot of things. I have just upgraded from openSUSE 11.2 to openSUSE 11.3 using zypper. It seems to work fine except that umtsmon stopped to work, so for now my laptop has no connetion to internet at all. Here are some information about my settings:
I have used usb_modeswitch to make the device a modem. Am I right if I say that usb_modeswitch is a one time command, or does it swap the setting each time it is called? Anyhow lsusb states that the device is a modem. (All the time.) code...
I am having desperate problems trying to connect to the net with a Huawei E173 USB modem. I was using Linux Mint 7 which I upgraded to version 9 today to see if that would fix the problem but it made no difference. Basically it seems the only time I can connect to the net in linux is if I use the modem in windows and then restart straight into linux, in that case it sometimes gets recognised and works. So at least I know it can work.
I've been trying loads of stuff like usb_modeswitch I found on the net but none of it has worked. Here is what ls-usb gives me -
I am unable to get any work done without the net and I will not have access to a wired connection til the new year.
This is really weird, and I would like just this question answered: I've spent like 2 hours by plugging, unplugging, rebooting, and doing everything I could, but the modem wasn't working. When I did ls /dev/ttyU* it was showing up a list of 6 usb devices.
Code: /dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2 /dev/ttyUSB3 /dev/ttyUSB4 /dev/ttyUSB5 And when I sent the command wvdialconf after looking into all the devices, it didn't recognize any modem.
The thing is, that by the time I was writing here for a solution, I disconnected the modem, and when I reconnected it I did a ls /dev/ttyU* just to copypaste the info, and Voil! there were just 2 devices, and wvdialconf worked out just fine! I would like to know what I was doing wrong, so I make sure it won't happen again.
I recently received my Ubuntu 9.10 CD, Kubuntu 9.10CD and Server Edition. I was recommended to do so by a friend because my computer Running on Windows Vista Home Basic with 512MB RAM has been extremely, unbearably slow for the last month or so I got the CD's yesterday and I ran the Ubuntu CD and everything was fine, I rebooted the Computer and it started up! It was great!! Really quick and responsive and easy to use and i LOVE it's features...
My only problem is my Broadband. I live in Ireland and I have my broadband with o2, it's quick and sufficient for my needs. I have a Huawei E270 usb modem (It's wireless broadband). And it wouldn't Work. I plugged it into my pc with Ubuntu up and running and it opened the File for o2 rather than the Interface for it. When I plugged the modem in there was a green lock symbol on the top right of the screen. Is Ubuntu even compatible with the E270 modem?
after yesterday's routine ubuntu update - allowing both security and recommended updates - i turned off my pc. turning it on today, it seems like my USB modem support is gone. i am using the "eciadsl-usermode_0.12-1_i386" package, and i get the message "/proc/bus/usb/devices: No such file or directory".i tried re-installing my eciadsl package, but got the same result.
I installed today Slackware64-current on my laptop, but I can't get working internet connection. I have installed wvstreams 4.61 and wvdial 1.61, configured it right, it gets an IP address and connection but I can't get an access to the internet.
how to connect my modem to the Internet, the help file on my Ubuntu 9.10 does not match the features available. I am using a modem from Starcomms (a local CDMA services provider in Nigeria) made by Epi Valley.
My router malfunctioned after a weird lightning strikes scenario so i tried connecting directly to the modem, i cant connect on my ubuntu desktop so itried connecting using my laptop with windows 7 and gets connected
my Internet connection stopped working suddenly after updating the packages using synaptec package manager and rebooting it..can anyone say me why did this happen.BTW,mine is ubuntu 10.10 and i am absolute new to linux.I had to configure my n/w connections right from the scrap again
Earlier today I decided I wanted to switch back over to ubuntu, my internet was working fine, but as soon as i reformatted to Linux my modem stopped showing any lights under ADSL - TX and RX. and I can't connect to my wireless connection anymore. What should I doooooooo
I think I have configured GLink usb modem so far. But when I run wvdial command, I got the following. But I can not browse the internet. Other problem is when I try to use Gnome PPP dialer, it could not connect. Modem type is listed as ttyS0 and so on while I have setting in wvdial.conf ttyUSB0 so it does not support.
chitra@chitra:~$ sudo wvdial [sudo] password for chitra: --> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATE0 --> Sending: ATQ0 OK --> Re-Sending: ATE0 OK --> Cannot get information for serial port ..... --> Initializing modem.
My internet is provided by a 3g modem usb. I am sharing the internet connection through my desktop into a router and then to the rest of my Ubunut machines. Currently if I want to file share I have to go into the network manager and change the eth0 settings from shared to dchp automatic and then unplug the cable from the internet port on the router to one of the network ports. Is it possible to add another network card to the main machine and use that exclusively for either internet or file sharing.
I am using samsung mobile (sgh-b220) in order to connect to the internet. I can easily connect on windows system , using PC studio software. I tried KPPP, wvidial none solved the problem. (It successfully dials the number. Put pppd connection will be terminated)
Some how I managed to scan modem communication taking place on the windows system, and tried exact commands on linux system still I am not able connect.
I have attached log files from windows machine. wvidial.conf, wvidial out put file along with this post.
I am unable to connect to internet using my cell phone(sony ericsson X1i xperia). When i connect from wired internet it connects without a problem. What settings should i change/ programmes to execute? Thank u in unticipation
I have installed WvDial (apparently) but it has no icon or launcher to start it by default, how do i get it to run? I also need basic set up how to. I am running Ubuntu 9.10 (Karmic) and network manager doesn't seem to be able to use my modem to connect to the internet (set up wizard works, appears connected, but then I get page not found error). Hence I wish to use WvDial to try to connect instead.