Hardware :: Unable To Install ZTE AC8710 CDMA Hi Speed Modem On Fedora 10 X86?
Mar 22, 2009
I am unable to install a ZTE AC8710 CDMA Hi Speed Modem on Fedora 10.I have somehow found the Linux Drivers but am unable to compile them as I do not have the required Kernel Headers which I can't download in Linux because my Internet is not working.I have tried the entire process of trying to add the Device ID and setting up xvdial but I am unable to find the ttyUSB or USBtty or USBacm in /dev.
View 7 Replies
ADVERTISEMENT
May 24, 2010
I have a ZTE CDMA 1x Modem (Reliance Netconnect). The modem has a USB interface and it works as a PLUG-&-PLAY device on windows (and has a Flash Storage too for driver information for windows.) I am unable to find my modem on Linux machine so that i can use wvdial for getting connected to internet on my linux machine. This the dmesg output for my modem.
[Code].....
View 1 Replies
View Related
Oct 17, 2010
Got this modem and now i'm struggling to get it working.Device: Pantech UM 175 (CDMA Wireless Broadband Modem) Driver: cdc_acm *Modem requires custom startup key
Code:
AT+CRM=1
Error: I get online for maximum 10 seconds, then i get disconnected and can't restart connection until i either replug the modem or disable mobile broadband conncetions via NetworkManager
What I've tried: google reconfigure modem use windows manual All the guides found on google are outdated SuSE version: 11.3 uname -a
Code:
Linux Gendalph.mhome 2.6.34.7-0.4-deskto #1 SMP PREEMPT 2010-10-07 19:07:51 +02 00 i686 i 686 i386 GNU/Linux
lsusb
Code:
Bus 002 Device 002: ID 106c:3714 Curitel Communications, Inc.
Logs:
dmesg
Code:
[ 314.420141] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 314.567174] usb 2-1: New USB device found, idVendor=106c, idProduct=3714
[ 314.567192] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 314.567204] usb 2-1: Product: PANTECH USB MODEM
[code]....
View 9 Replies
View Related
Dec 29, 2010
I am able to set up this modem on Ubuntu and Fedora but cannot get it to work on Slackware. I have tried many configurations, all with no success.
View 5 Replies
View Related
Sep 17, 2009
I am using Ubuntu 9.04, I want to connect my Reliance ZTE cdma modem in ubuntu,could anyone give the steps in detail. i have run the following commands in the terminal and pasted the result for each command
sudo lshw -C network
lspci -nn
lsusb
[code]...
View 6 Replies
View Related
Oct 31, 2010
i can't connect the internet using Skytech CDMA USB modem in my ubunntu 10.10 (Super OS) i follow the instruction in this thread url.
1. Boot w/ out device,
2. connect the device,
3. open the terminal and type..
GC224PA-UUF:~$ usb-devices
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
code....
View 1 Replies
View Related
Jan 13, 2011
I think I have configured GLink usb modem so far. But when I run wvdial command, I got the following. But I can not browse the internet. Other problem is when I try to use Gnome PPP dialer, it could not connect. Modem type is listed as ttyS0 and so on while I have setting in wvdial.conf ttyUSB0 so it does not support.
chitra@chitra:~$ sudo wvdial
[sudo] password for chitra:
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATE0
--> Sending: ATQ0
OK
--> Re-Sending: ATE0
OK
--> Cannot get information for serial port .....
--> Initializing modem.
View 9 Replies
View Related
Jul 19, 2011
cdma usb modem recognized on as mass storage device.nstalled wvdialler and made appropriate lines to conf file and still does not work.
View 5 Replies
View Related
Apr 10, 2010
I'm using a 'ice.net' D-50 (CDMA EV-DO rev A) mobile broadband USB modem, also sold as Cmotech CNU-680 in other areas. The modem is connected to a USB port on a hp8710w mobile workstation.
As the 11.2 Gnome Network Manager won't connect this modem to Internet (see my first post here), I have downloaded and installed a 'D50 Modem Manager program' from [url]
After unpacking and installing this cmotech-qtmodem-1.6-1.i586.rpm package for suse on 11.2 x86_64, the gui application 'D-50 Modem Manager' is found in the Internet Group.
However, neither this program does connect the D-50 modem really on 11.2 x86_64 (as it did on 11.1 x86_64). Tried both traditional network setup and with Network Manager.
Any idea and suggestion how to trobleshoot this further? I think I've seen that a newer version cmotech-qtmodem 1.9 has been mentioned on the web, but without being able to find and download this version.
Command output as follows:
As normal user:
On the Modem Manager gui: D-50 modem is ready
From Login script Debug window:
As root:
It seemed like the modem connected, but Firefox was not able to connect afterwards (Server not found)
View 2 Replies
View Related
May 15, 2010
I am new to linux.I installed fedora 12. i have setup wvdial to connect to the internet.but the problem is my usb modem's speed is being detected too low. It is zte cdma usb modem. In windows the baud rate was detected 230400. but wvdial detects the baud rate only 9600. the download speed is slower and web pages also load slowly.How can i correct this problem so that my modem works at full potential.
View 3 Replies
View Related
Aug 12, 2010
English :I'm a newbie please help me??? How to connect Modem GSM(3g-hsdpa) / CDMA in Ubuntu??
Indonesia : Aku newbie, tolong bantu saya??? Bagaimana mengkoneksikan GSM Modem (3g-HSDPA) / CDMA di Ubuntu?
Modem : Option Icon322 / GlobeTrotter Icon322
View 3 Replies
View Related
Jun 30, 2011
I couldn't connect my Micromax 300G modem in Debian Linux. From internet (in Windows Vista), I came across the information of USB_ModeSwitch and then I downloaded it. While going to install it, I came across the problem that TCL-interpreter is not available in Debian Linux. Then again I restarted my laptop in Windows Vista and connected my Micromax modem and from internet downloaded TCL8.5.10-src.tar.gz. But while going to install it, I came across the problem that " configure: error: no acceptable C compiler found in $PATH " . Also as presently, I am unable to connect my modem therefore I am unable to issue the code:" apt-get update ".
View 16 Replies
View Related
Jul 17, 2010
I use Cricket Broadband. I set up my USB modem using the exact same init strings, settings and other info that makes my modem work in other distros. I don't see a way to call a PPP application to make the system dial out on my CDMA modem. Where do I find one using this Live 32 bit CD?
View 5 Replies
View Related
Jan 23, 2010
I'm trying to install my first linux system. I would like to use it as a server on an old 386 PC.For the internet connexion (ADSL) i use a Speedtouch USB modem.When i list the peripheral installed on the system, i see the modem with apparently a driver, but the device is listed as non classified. For me it should be directed to DSL0 but..According to some tuto i declared a DSL connection, ppp with ATM (VPI8 and VCI35).I launch the connection with pinternet but the connection failed.
View 4 Replies
View Related
Dec 27, 2010
I downloaded the usb-modeswitch and usb-modeswitch-data as suggested by one of the users from [URL] but whenever I try to install after going to the folder using sudo make install, none of the packages get inatalled. I am a new user and I am using ubuntu 9.10. I want to use my MICROMAX 300G USB modem to surf internet but can not do.
View 2 Replies
View Related
Mar 30, 2011
I live in the boonies and I have dial up. Whats worse is the ISP has a limiter on the server which cuts the speed down to 26.4 k. Every time I download and the speed gets over that, the modem pauses then starts again. It sucks. If I could just have a steady stream I would be better off.
I am using a Linuxant type hsfmodem hybrid. How can I slow the speed down on the modem so it doesn't jump over 26k so much ?
I tried adjusting the baud which shortens the duration of the pause, I think, but when I go lower it actually makes it longer.
View 2 Replies
View Related
May 25, 2010
I installed Ubuntu 10.04 this morning and everything is working fine apart from one thing. I am unable to install my Speedtouch 330 modem on it and connect to the internet, I looked on the help pages and found this:
"Visit Ubuntu Packages Search and search for each of the following packages. Download them to a folder that is also visible from Ubuntu (or to a USB stick).
As I cannot access the internet I had to go back to windows, download them onto a memory stick, go back on to Ubuntu and install them. The first 12 worked fine and are now installed but number 13 and 14 wont allow me to update because "the dependency is un-satisfiable" does anyone know what this means and how I can fix it? I was also unable to get the USB ADSL Modem Manager too install either because of another error.
View 5 Replies
View Related
Jan 23, 2010
Trying to connect a computer to the internet with a modem, and I know the modem works. Was just used the other day with another linux OS.If I go into the Kinfocenter and look under pci devices with the current F12 setup, the computer identifies a 3com corp modem division 56k faxmodem model 5610.(which is a hardware modem)
View 1 Replies
View Related
Jun 25, 2011
First of all heres the LSUSB command output:
Code:
Bus 005 Device 005: ID 0af0:6971 Option Globetrotter HSDPA Modem
My Problem is following:
Output of /var/log/messages:
Code:
Jun 25 16:16:25 destination kernel: [29898.995150] usb 5-2: new full speed USB device using ohci_hcd and address 6
Jun 25 16:16:25 destination kernel: [29899.148020] usb 5-2: New USB device found, idVendor=0af0, idProduct=6971
Jun 25 16:16:25 destination kernel: [29899.148031] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[code]....
View 6 Replies
View Related
Nov 17, 2010
I did a port scan on my server from outside my network and saw that port 10080 AMANDA is open.Amanda isn't installed on any of my computers or my server and the port is not forwarded by my modem or router. So why is this port open and how can I close it?
View 6 Replies
View Related
Jun 30, 2009
I tried at Fedora 10, didn't work, and then Ubuntu 9.0.4, in the hope of it may work, my CDMA 1x Mobile broadband.( it works well under Win XP). and it didn't work.And then it comes the Fedora 11, still the same problem.
Seems Linux cannot recoginize my CMDA 1x Mobile Bbroadband, becuase the newwork manager doesn't pop up with messages of detecting a new hardware.
And when I run the desmeg:
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.29.4-167.fc11.i686.PAE ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
[Code]...
View 7 Replies
View Related
Jan 3, 2011
How I can send and receive SMS via CDMA Connection. I have tried Gammu (hangs) and Gnome-Phone-Manager (Can't run on GTK3). Gnokii? Well ... I'd like to hear from someone who has succeeded with it on F14. I don't like having to boot into Windows to check my Phone Credits
View 11 Replies
View Related
Mar 12, 2009
I've FC10 installed. After updating a few days back, I'm unable to use Network Manager to connect to the net through my USB Modem. All the threads I've read say to do
Code: yum update NetworkManager but how can I do it without net connection? Can anyone post the exact link of the Network Manager's latest and BUG-FREE rpm so that I can directly run it?
View 10 Replies
View Related
Mar 23, 2011
find and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
View 1 Replies
View Related
Feb 18, 2010
How to connect huawel ETS2252+ Cdma phone to Fedora 12
View 1 Replies
View Related
Jan 25, 2010
I wish to install a modem to permit dial in access (ie to be able to access the system remotely). The modem I have is an external modem on the 9 pin serial port. What configuration would I need to perform on the server?
View 1 Replies
View Related
Nov 5, 2010
have a " Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)" NIC.I was unable to set it 1000bit and full duplexThe output lspci -v as below.Quote:
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
Subsystem: ASUSTeK Computer Inc. Device 8432
[code]...
View 3 Replies
View Related
Feb 3, 2010
Steps for using scan Modem to Identfy dial up modem?
View 1 Replies
View Related
Nov 8, 2010
I have a modem PROLINK PHS 100. sometimes when I plug in the modem, can be used. sometimes there is no reaction at all. What should I do.
View 2 Replies
View Related
Jan 29, 2009
I have FC4 installed on my system and my internet connection is a ADSL through a Router but i have a wireless isdn line as backup connection the modem i use is LG LSP 340E which is a limited mobility cdma phone with in built modem, the supplier and manufacturer has given drivers for windows only. How to install this modem onto my system, I had tried auto detection but it didn't work, I had connected the modem to the serial port in my system.
View 2 Replies
View Related
